Age | Commit message (Collapse) | Author |
|
Currently runqemu hardcodes the "ip=" kernel boot parameter
when configuring QEMU to use tap or slirp networking. This makes
the guest system to have a network interface pre-configured
by kernel and causes systemd to fail renaming the interface
to whatever pleases it:
Feb 21 10:10:20 intel-corei7-64 systemd-udevd[201]: Error changing
net interface name 'eth0' to 'enp0s3': Device or resource busy,
Always append user input for kernel boot params after the ones
added by the script. This way user input has priority over runqemu's
default params.
(From OE-Core rev: 3f68b5c8d24b52aed5bb3ed970dd8f779b65b1b3)
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
* it reports at least 2 issues in every build (this file in
native and target sysroot) add it to whitelist
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
list of failed
* format of bitbake tasks changed in:
2c88afb taskdata/runqueue: Rewrite without use of ID indirection
-ERROR: Task 4 (/OE/build/oe-core/openembedded-core/meta/recipes-devtools/rpm/sftp.bb, do_fetch) failed with exit code '1'
+ERROR: Task /OE/build/oe-core/openembedded-core/meta/recipes-devtools/rpm/sftp.bb:do_fetch (/OE/build/oe-core/openembedded-core/meta/recipes-devtools/rpm/sftp.bb:do_fetch) failed with exit code '1'
so strip not only '\.bb, .*' used before, but also '\.bb:.*' to drop
the task name to get recipe name.
* for more details see:
http://lists.openembedded.org/pipermail/openembedded-core/2016-June/123132.html
* without this change you can see test-dependencies.sh trying to rebuild packages
like:
Building recipe: fbprogress (6/21)
Building recipe: fbprogress.bb:do (7/21)
where the later of course doesn't exist as a recipe
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Total number of partitions should be taken into account when calculating
real partition number for msdos partition table. The number can be
different for the 4th partition: it can be 4 if there are 4 partitions in
the table and 5 if there are more than 4 partitions in the table. In the
latter case number 4 is occupied by extended partition.
[YOCTO #11790]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Mkfs may create EXT file systems which can only be optimized by fsck
and not by itself, e.g. directory optimization (in Pass 3A).
To prevent those optimizations during runtime, it will be performed after
the creation of an EXT file system.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Commit: 512334f102a33833d39af53467894315f0715d07
"python-3.5-manifest: Add imp to importlib"
added imp to importlib in the generated manifest, but not in the generator script.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Fixed:
* In build1:
$ runqemu nfs qemux86-64
In build2:
$ runqemu nfs qemux86-64
It would fail before since the port numerbs and conf files are
conflicted, now make runqemu-export-rootfs work together with runqemu to
fix the problem.
* And we don't need export PSEUDO_LOCALSTATEDIR in runqemu, the
runqemu-export-rootfs can handle it well based on NFS_EXPORT_DIR.
* Remove "async" option from unfsd to fix warning in syslog:
Warning: unknown exports option `async' ignored
* Fixed typos
Both slirp and tap can work.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Fixed:
$ runqemu nfs qemux86-64
[snip]
On your target please remember to add the following options for NFS
nfsroot=IP_ADDRESS:/path/to/nfsroot,nfsvers=3,port=,mountprog=,nfsprog=,udp,mountport=
[snip]
Note that the values are null, this is because their var names are
inconsistent.
[YOCTO #10519]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Without the int() function this variable will be a string. This will led
to a error in Filemap on line 545 due wrong types.
> [...]
> File
> ".../poky/scripts/lib/wic/filemap.py", line 545, in sparse_copy
> if start < skip < end:
> TypeError: unorderable types: int() < str()
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
(cherry picked from commit 46b5814bcdc0e7e3cb293e877e2aa949baf5fef8)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
This patches removes the empty space in front of the copied file which
was skipped. Without this reduction it's not possible to place a
partition with rawcopy and skip parameter on a desired alignment.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
(cherry picked from commit 5c024d71f9413b81ee1707dbc41f0721f8f27bdb)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Don't worth bother with logical partition on MBR partition type (aka
msdos) if disk image generated by wic should have 4 partitions.
(From OE-Core rev: 36a558fbdc96094626e7de1a3510691e30885368)
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Yet another instance of us expecting a string back from subprocess when
in Python 3 what you get back is bytes. Just decode the output within
run_command() so we avoid this everywhere.
(From OE-Core rev: 103faae78cdff5280c7b7cdb7ca01e0868d02ec9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
When creating a patch set with cover letter using the
send-pull-request script, both the "In-Reply-To" and "References"
headers are appended twice in patch 2 and subsequent.
That's because git-format-patch already inserted them and then
git-send-email repeats that. Suppressing mail threading in
git-send-email with --no-thread avoids the problem and is the
right solution because it works regardless whether git-send-email is
called once or twicee.
Repeating these headers is a violation of RFC 2822 and can confuse
mail programs. For example, Patchwork does not detect a patch series
problem when there are these extra headers.
[YOCTO #10718]
(From OE-Core rev: 303a1aa3df43eb0b693d8602062fa33c4a08fdd6)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Fix typos in documentation of Image.add_partition() and
Image.__format_disks().
(From OE-Core rev: f5bf7bf253224912c66bab89f48ff63a73e0d698)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
We explicitly check for --fstype if no source was provided for a
partition. However, this was not the case for rootfs partitions. Make
sure to raise an error if filesystem was left unspecified when preparing
a rootfs partition image.
(From OE-Core rev: b8c35fcad57810a87aa25ebeb533adf286eed565)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The size field of Partition class is expected to be an integer and ought
to be set inside prepare_*() method. Make sure that this is always the
case.
(From OE-Core rev: a37838f995ae642b0b8bdd47a605a264fb3bf200)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Root device name in systemd-bootdisk.wks is 'sda'. This can cause
images, produced using this wks to refuse booting if real device
name is not 'sda'. For example, when booting MinnowBoard MAX from
MicroSD card the boot process stucks with this message on the boot
console output: Waiting for root device /dev/sda2...
This happens because real device name of MicroSD card on this device
is mmcblk1.
Used --use-uuid option for root partition. This should make
wic to put partiion UUID instead of device name into kernel command
line.
[YOCTO #10485]
(From OE-Core rev: 5b73d5f484cc844affe91ec19d881d42e187f30c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
This directory shouldn't contain local.conf and bblayers.conf - just
templates for them; except it doesn't have to contain those, it just has
to exist to pass this test. Change the error message accordingly, and
mention TEMPLATECONF so that the user has at least some context.
(From OE-Core rev: 61adaaa4348c670769f8750223977dbefe369ffb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
"Shows" -> "Show", to be consistent with standard form of help output.
(From OE-Core rev: 5a7994df6cdb5af8d240e2802e6bb3d9671f17e3)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The new runqemu script assumes that if OECORE_NATIVE_SYSROOT is set then
it shouldn't try to run bitbake to find out the values of various
variables such as DEPLOY_DIR_IMAGE; this assumption is incorrect for the
extensible SDK. To work around this, clear OECORE_NATIVE_SYSROOT in the
environment when running runqemu.
Fixes [YOCTO #10447].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
According to UEFI specification all EFI platforms must support
GUID Partition Table(GPT) disk layout. Here is a list of advantages
of using GPT disk layout over the legacy MBR partitioning:
- Logical Block Addresses (LBAs) are 64 bits (rather than 32 bits).
- Supports many partitions (rather than just four primary partitions).
- Provides both a primary and backup partition table for redundancy.
- Uses version number and size fields for future expansion.
- Uses CRC32 fields for improved data integrity.
- Defines a GUID for uniquely identifying each partition.
- Uses a GUID and attributes to define partition content type.
- Each partition contains a 36 character human readable name.
Used GPT partitioning in all EFI kickstart files.
Tested result images on NUC, MinnowBoard MAX and MinnowBoard Turbot.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed
for any of reference BSPs.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Stopped using GPT partition table in mkefidisk.wks as it's not
supported by all reference hardware.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disk identifier created by parted doesn't match the one we generated
and used in bootloader config. We need to rewrite it to make our image
bootable.
Modified involved API and data structures to access previously
generated disk identifiers after MBR is initialized. Written disk
identifiers to MBR.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added generation of partition UUIDs for MSDOS partitions.
UUID for MSDOS partitions is <disk identifier>-<partition number>,
where disk identifier is a random 4 bytes long number. It's usually
generated when MBR/partition table is initialized.
As UUID is used to point to the root partition in bootloader config
we need to generate it before the MBR is initialized.
After MBR is created we need to rewrite system identifier to match
it with what is used in bootloader config. This will be implemented
in the next commit.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sgdisk fails to set PARTUUID for msdos partitions as it's only
supported for GPT partitions.
Checked partition table format to run sgdisk --partition-guid
only for GPT partitions.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Makes it a bit more descriptive and potentially more discoverable. Most
people seemed to prefer an oe- prefix, so let's go with that.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With recent changes to recipeutils, the list of local files returned
by get_recipe_local_files could possibly include source files. This
only happens when the recipe contains a SRC_URI using subdir= to put
files in the source tree. These files should be ignored when
populating the list of local files for oe-local-files directory.
[YOCTO #10326]
introduced in
OE-Core revision 9069fef5dad5a873c8a8f720f7bcbc7625556309
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Relying on that awk is installed on the target just to extract the
fourth column (i.e., the free volume size) from `df -P` is an
unnecessary dependency for devtool deploy-target. As it is already
using sed to mangle the output from `df -P`, this can easily be
modified to only extract the free volume size.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the user runs devtool add on an npm:// URL (or source tree that uses
node.js), and npm is not available, just build nodejs-native instead of
telling the user they need to do it; if that fails because there isn't
any such recipe (which would be the default, since it's not in OE-Core)
then produce a slightly more readable error message hinting at what the
user needs to do.
Note that this forces the use of nodejs-native rather than npm on the
host - this makes sense for two reasons: (1) we need it to be compatible
with nodejs for the target, and (2) we have to have a recipe for that
anyway, so allowing you to avoid having a recipe for the native version
isn't really beneficial.
There's a bit of a hack in here in order to allow this - for node.js
sources that aren't fetched via npm we don't know that they are that
until we've fetched and unpacked them, by which time we're inside
recipetool and have an active tinfoil instance that will prevent bitbake
being run. To avoid this being an issue, we allow recipetool to get to
the point where we know we need npm and then exit with a specific exit
code, at which point devtool can try to build it and then if that
succeeds, it will re-execute recipetool. This is definitely not ideal,
but it can't really be refactored and done properly until we do the
tinfoil2 refactoring; in the mean time though we still want to be
helpful to the user.
Fixes [YOCTO #10337].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want to remove the -f/--fetch option at some point (as you can now
specify a URL as a positional argument instead) so display a warning
that it's deprecated if it is used.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We were supposed to be printing out the specified recipe name here but I
forgot to specify a parameter for the string.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a preparation to use mkefidisk as a default wks for
genericx86* BSPs. This change enables usage of partition UUID
instead of device name to specify root partition in kernel
command line. It should make images to boot on devices with
boot device names that differ from what's mentioned in wks file.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added 'native' convenience shell script to run native tools.
Example of usage:
> bitbake bmap-tools-native
> native bmaptool --version
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Utilize the new return value (2) from oe-build-perf-test. Do not exit
with an error in case some individual tests fail. Even if some tests
fail we still want to complete successfully, that is, display and
archive the results and do cleanup. The individual tests do not depend
on each other anymore so test failures shouldn't affect the results of
successful tests.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a new return value '2' that indicates that some tests failed but
there were no fatal errors (i.e. configuration mistakes or bugs in the
tests themselves).
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Display default values for '-a' and '-w' command line arguments in the
usage help text.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Stricter checking of command line arguments. The script doesn't use any
positional arguments so don't accept any and error out if those are
found.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add mipsel and mips64el as an option.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Makes it possible to average over multiple buildstats. If --multi is
specified (and the given path is a directory) the script will read all
buildstats from the given directory and use averaged values calculated
from them.
All of the buildstats must be from a "similar" build, meaning that no
differences in package versions or tasks are allowed. Otherwise, the
script will exit with an error.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For comparing the elapsed wall clock time of tests. Default values for
--min-val and --min-absdiff are 5 seconds and 2 seconds.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Two new options, making it possible to compare the number of filesystem
operations of tasks. Defaults for --min-val and --min-absdiff are set to
more or less arbitrary 500 and 50 operations, respectively.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These are I/O counter values from /proc/<pid>/io and represent the
number of bytes read from / written to the storage layer. Default values
for --min-val and --min-absdiff limits are set to 512kB and 128kB,
respectively.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A new command line option for choosing which "attribute" of the
buildstats to compare. At first, the already supported 'cputime' is the
only available option. But, refactoring done in this patch should make
it easy to add new attribute types.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Dynamically adjust the width of all fields in task diff output. Makes
it easier to print other units than cputime, too.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
New class representing buildstats data of a single task.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|