| Age | Commit message (Collapse) | Author |
|---|
|
There is no STAGING_DIR_NATIVE or bitbake in a extracted sdk,
so check OECORE_NATIVE_SYSROOT and use it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A qemuboot conf file is a convenience but it should still be
possible to invoke runqemu without them, especially for examples
such as using the SDK with an extracted rootfs via NFS.
As read_qemuboot() is always called we need to be sure that function
can return cleanly, without throwing Exceptions, even if a qemuboot
conf file isn't found.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the kernel or rootfs names written to the qemuboot.conf can't
be found, try and find the symlinked variant of the filename.
This will help usability of runqemu, for example where a user
downloads an image and associated files as the symlinked names
yet the qemuboot.conf variables point to the full, non-linked,
file names.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make it clearer that we are looking for a file which ends with
qemuboot.conf
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a required binary cannot be found print some guidance pointing
to using a sourced OE build environment or a qemuboot.conf file,
based on a similar message from the previous shell-based runqemu.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that recipeutils.validate_pn() properly validates characters used in
the name, we can drop this bit checking for '/' since that's not
permitted by validate_pn(). (The FIXME comment here - that I myself
apparently wrote - is questionable since that function was clearly never
intended to allow '/', perhaps I was misled because it was broken and
did so).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In keeping with making recipetool create / devtool add as easy to use as
possible, users shouldn't have to know how to reformat git short form ssh
URLs for consumption by BitBake's fetcher (for example
user@git.example.com:repo.git should be expressed as
git://user@git.example.com/repo.git;protocol=ssh ) - instead we should
just take care of that automatically. Add some logic in the appropriate
places to do that.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Filter out a plain "Licensed under the XXXX license" statement, as seen
in the capnproto project (and no doubt others).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
AX_PKG_SWIG is not the only commonly-used macro for detecting swig -
there's also AC_PROG_SWIG. As per AX_PKG_SWIG, add swig-native to
DEPENDS if AC_PROG_SWIG is found in configure.ac.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If python is required then we need to inherit pythonnative (or
python3native) otherwise do_configure will probably fail since it won't
be able to find python.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When creating a recipe for an existing local git clone, we attempt to
use the fetcher to determine if it supports the SRCREV variable.
Unfortunately running this code does a network check to get the latest
revision as a direct result of us using '${AUTOREV}' as a default value.
If you don't have a network connection this will of course fail. Rather
than have this block creating the recipe, catch the exception and just
guess from the URL.
Ultimately this should probably be fixed in the fetcher but for now this
will at least resolve the issue on this end.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I ran into an example where recipetool was getting the name/version
completely wrong:
https://bitbucket.org/sortsmill/libunicodenames/downloads/libunicodenames-1.1.0_beta1.tar.xz
>From this it would create a libunicodenames-1.1.0-beta1_1.1.0-beta1.bb
file (likely because it couldn't split the file name and therefore took
all of it, then got the version from one of the files inside the
tarball). When this happens it's just irritating because you then have
to delete the recipe / run devtool reset and then run recipetool create
/ devtool add again and specify the version manually.
This patch is the result of systematically running the
determine_from_filename() function over the files on the Yocto Project
source mirror and my local downloads directory and fixing as many of the
generic issues as reasonably practical - it now gets the name and
version correct much more often. There are still cases where it won't,
but they are now in the minority.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Try to ensure that for Apache, GPL and LGPL where the values extracted
from the "Classifiers" field may not be version-specific, if there is a
versioned license in the free-form license field then use that instead.
Also insert the free-form license field as a comment in the recipe for
the user's reference.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make use of the extravalues dict to send back other variable values from
the python handling plugin, and enable passing back PV and PN. This not
only places variable values in the final recipe a bit more consistently
with other types of source, it also allows the name and version to be
picked up fron a local source tree and not just when the recipe is
fetched from a remote URL that happens to have those in it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The open(self.lock, 'w') may fail when the lock is created by other
users, return false for this case to let it try other devices.
Fixed:
runqemu - INFO - Running /sbin/ip link...
runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock...
Traceback (most recent call last):
File "/buildarea/lyang1/poky/scripts/runqemu", line 972, in <module>
ret = main()
File "/buildarea/lyang1/poky/scripts/runqemu", line 963, in main
config.setup_network()
File "/buildarea/lyang1/poky/scripts/runqemu", line 810, in setup_network
self.setup_tap()
File "/buildarea/lyang1/poky/scripts/runqemu", line 761, in setup_tap
if self.acquire_lock():
File "/buildarea/lyang1/poky/scripts/runqemu", line 182, in acquire_lock
lock_descriptor = open(self.lock, 'w')
PermissionError: [Errno 13] Permission denied: '/tmp/qemu-tap-locks/tap0.lock'
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Shell functions in bitbake are executed with /bin/sh so should be POSIX
compliant and not use Bash extensions, or at least only use extensions that are
implemented in both dash and ash (busybox).
This tool will extract all of the shell scripts from all recipes and run them
through checkbashisms (it assumes that checkbashisms is on $PATH).
There is a whitelist to filter out false-positives such as the use of $HOSTNAME
(a bashism) in functions where we have defined it, or using the 'type' builtin
which is supported by ash/dash.
[ YOCTO #8851 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New script for comparing buildstats from two separate builds. The script
has two modes: normally it prints the differences in task execution
(cpu) times but using --ver-diff option makes it just print the recipe
version differences without any cpu time data. Other command line
options are provided to alter the sort criteria of the data and to
filter out insignificant differences and/or short tasks.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
python coverage versions lower than 4.x have problems with some distros. Adding the 4.x version as requirement to continue with coverage tracking.
[YOCTO #10207]
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When 'git request-pull' fails it makes sense to remove output
directory. Otherwise create-pull-request will complain that
output directory already exists on the next run.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There might be a race issue when multi runqemu processess are
running at the same time:
| Traceback (most recent call last):
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 920, in <module>
| ret = main()
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 911, in main
| config.setup_network()
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 760, in setup_network
| self.setup_tap()
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 697, in setup_tap
| os.mkdir(lockdir)
| FileExistsError: [Errno 17] File exists: '/tmp/qemu-tap-locks'
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow access to the snapshot option of qemu to simplify some of our runtime
testing to avoid copying images.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have problems where systems simply stop booting and hang. This is due
to a lack of entropy which means ssh keys and networking can't be brought
up. Adding in the virtio-rng passthrough support allows host entropy to
pass into the guess and avoids these hangs.
This is particularly problematic after the gnutls upgrade which starts
using /dev/random instead of /dev/urandom but was an issue we'd occasionally
seem before that.
It particualrly affected x86 and ppc machines for some reason.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current qemu instances all share the same MAC address. This shouldn't be an
issue as they are all on separate network interfaces, however on the slight
chance this is causing problems, its easy enough to ensure we use unique
MAC addresses based on the IP numbers we assign.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
testimage.bbclass uses runqemu to execute runtime tests on a qemu
target, this means that bitbake is already running and `bitbake -e`
can't be called to obtain bitbake variables.
runqemu tries to work around being unable to read values for
bitbake variables by inferring the MACHINE from the
DEPLOY_DIR_IMAGE setting, however if a user sets that variable in
a manner which doesn't follow the systems expectations (i.e. if
running `bitbake -c testimage` against a directory of pre-generated
images in a user-specified path) the inferring of the MACHINE name
from the DEPLOY_DIR_IMAGE location will fail.
It's possible that check_arg_machine() shouldn't cause runqemu to
fail and that runqemu should proceed with the user-supplied value
even if it can't be verified. This patch simply ensures that a
workflow where the user sets DEPLOY_DIR_IMAGE continues to work
without changing too much of the runqemu code.
[YOCTO #10238]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When runqemu is invoked from a running bitbake instance it will be
unable to call `bitbake -e` due to the lock held by the calling
bitbake instance.
Our test code sets an OE_TMPDIR environment variable from which we
can infer/guess paths. Add code to do so when self.bitbake_e can't
be set, much as the sh version of runqemu did.
[YOCTO #10240]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the STAGING_*_NATIVE directories from the config file don't exist
and we're in a sourced OE build directory try to extract the paths
from `bitbake -e`
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When runqemu is started with a *.qemuboot.conf arg assume that image
artefacts are relative to that file, rather than in whatever
directory the DEPLOY_DIR_IMAGE variable in the conf file points to.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, runqemu had hard coded machine knowledge, which limited its
usage, for example, qemu can boot genericx86, but runqemu can't, we need
edit runqemu/runqemu-internal a lot if we want to boot genericx86.
Now bsp conf files can set vars to make it can be boot by runqemu, and
qemuboot.bbclass will save these info to DEPLOY_DIR_IMAGE/qemuboot.conf.
Please see qemuboot.bbclass' comments on how to set the vars.
* Re-write it in python3, which can reduce lines from 1239 to about 750
lines
* All the machine knowledges are gone
* All of the TUN_ARCH knowledge are gone
* All the previous options are preserved, and there is a new way to run
runqemu: (it doesn't need run "bitake -e" in such a case)
$ runqemu tmp/deploy/images/qemux86
or:
$ runqemu tmp/deploy/images/qemuarm/<image>.ext4
or:
$ runqemu tmp/deploy/images/qemuarm/qemuboot.conf
* Fixed audio support, not limited on x86 or x86_64
* Fix SLIRP mode, add help message, avoid mixing with tap
* Fix NFS boot, it will extract <image>.tar.bz2 or tar.gz to
DEPLOY_DIR_IMAGE/<image>-nfsroot when no NFS_DIR, and remove it after
stop.
* More bsps can be boot, such as genericx86 and genericx86-64.
* The patch for qemuzynq, qemuzynqmp, qemumicroblaze has been sent to
meta-xilinx' mailing list.
* I can't find any qemush4 bsp or how to build it, so it is not
considered atm.
[YOCTO #1018]
[YOCTO #4827]
[YOCTO #7459]
[YOCTO #7887]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we output extra blank lines (because of some automated editing) then
it makes the output recipe look a bit untidy. You could argue that we
should simply have the editing code not do that, but sometimes we don't
have enough context there for that to be practical. It's simple enough
to just filter out the extra blank lines when writing the file, so just
do it that way.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If you have your own node.js application you may not publish it (or at
least not immediately) in an npm registry - it might just be in a
repository on github or on your local machine. Add support to recipetool
create for creating recipes to build such applications - extract their
dependencies, fetch them, and add corresponding npm:// URLs to SRC_URI,
and ensure that LICENSE / LIC_FILES_CHKSUM are updated to match. For
example, you can now run:
recipetool create https://github.com/diversario/node-ssdp
(I had to borrow some code from bitbake/lib/bb/fetch2/npm.py to
implement this functionality; this should be refactored out but now
isn't the time to do that refactoring.)
Part of the fix for [YOCTO #9537].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If you make adjustments to the source tree (as create_npm.py will be)
then you will need to re-run the license variable handling code at the
end so that we get all of the files that should go into
LIC_FILES_CHKSUM if nothing else. Split out the license variable
handling to a separate function in order to allow this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
For debugging it's useful to be able to tell recipetool to keep the
temporary directory.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Ensure we fetch submodules and set SRC_URI correctly when pointing to a
git repository that contains submodules.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
When trying to map python module dependencies to the packages that
provide them, if we're looking for .so files that satisfy
dependencies then we need to exclude files found under the .debug
directory, otherwise the dependency will get mapped to the python-dbg
package which isn't correct.
For example, this fixes creating a recipe for pyserial and not getting
python-fcntl in RDEPENDS_${PN}, leading to errors when trying to use the
serial module on the target.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
If AX_PKG_SWIG is found in configure.ac, then what's being looked for is
the swig binary, not swig for the target - so fix the dependency
accordingly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
It's rare but there are recipes that have individual files (as opposed
to archives) in SRC_URI using subdir= to put them under the source tree,
the examples in OE-Core being bzip2 and openssl. This broke devtool
update-recipe (and devtool finish) because the file wasn't unpacked into
the oe-local-files directory and thus when it came time to update the
recipe, the file was assumed to have been deleted by the user and thus
the file was erroneously removed. Add logic to handle these properly so
that this doesn't happen.
(We still have another potential problem in that these files become part
of the initial commit from upstream, which could be confusing because
they didn't come from there - but that's a separate issue and not one
that is trivially solved.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
The --log-file command line argument was slightly broken as {out_dir}
string replacement was not working as expected.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Not specifying -C caused oe-build-perf-test to try to commit results to
the build directory.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should always shut down tinfoil when we're finished with it, either
by explicitly calling the shutdown() method or by using it as a
context manager ("with ...").
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The multiconfig changes altered some of the functions being called here,
so update the calls. Make use of the new Tinfoil.parse_recipe_file()
function to make parsing easier.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using PATCHTOOL = "git", the user of the system is not really the
committer - it's the build system itself. Thus, specify "dummy" values
for username and email instead of using the user's configured values.
Various parts of the devtool code that need to make commits have also
been updated to use the same logic.
This allows PATCHTOOL = "git" and devtool to be used on systems where
git user.name / user.email has not been set (on versions of git where
it doesn't default a value under this circumstance).
If you want to return to the old behaviour where the externally
configured user name / email are used, set the following in your
local.conf:
PATCH_GIT_USER_NAME = ""
PATCH_GIT_USER_EMAIL = ""
Fixes [YOCTO #8703].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rename the (main) log file of the oe-build-perf-test script from
'output.log' to 'oe-build-perf-test.log'. Also, add a new command line
option --log-file which makes it possible to use an alternative log file
name/path, if needed. Note that the file name/path is relative to the
output directory.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Write globalres log file and commit results to Git even if some tests
failed. Now that tests do not depend on each other there should be no
risk of bogus results caused by test failures.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New command line argument '-w' may be used to specify work dir other
than the default <GIT_DIR>/build-perf-test.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add new command line argument '-a' that can be used to define the
directory where results (tarballs) are archived. Giving an empty string
disables archiving which makes sense if you store results in Git.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add new command line argument '-C' that allows saving results in a Git
repository.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use getopts for parsing the command line. This changes the usage so that
if a commit (to-be-tested) is defined it must be given by using '-c',
instead of a positional argument.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Makes it possible to create easily sortable tags. Also, the default tag
format is updated to use the new keyword.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This makes it possible to create numbered tags, where the "basename" of
the tag is the same and the only difference is an (automatically)
increasing index number. This is useful if you do multiple test runs on
the same commit. For example, using:
--commit-results-tag {tester_host}/{git_commit}/{tag_num}
would give you tags something like:
myhost/decb3119dffd3fd38b800bebc1e510f9217a152e/0
myhost/decb3119dffd3fd38b800bebc1e510f9217a152e/1
...
The default tag format is updated to use this new keyword in order to
prevent unintentional tag name clashes.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Robert Yang
Joshua Lock
Paul Eggleton
Ross Burton
Markus Lehtonen
Humberto Ibarra
Ed Bartosh
Richard Purdie
Joshua Lock