| Age | Commit message (Collapse) | Author |
|---|
|
manipulation
Several distros are now shipping "python" as python v3 contra to the original
python guidelines. This causes users confusion/pain in trying to use our tools.
We can just force "python" to "python2" within HOSTTOOLS to avoid this issue
and hide the complexity from the user.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
atm, 'oe-init-build-env' expects 'bitbake' to be within the OE core git
repository. This complicates the project setup because you have to
manage the 'bitbake' directory or symlink manually (or specify the
bitbake location explicitly).
Looking for 'bitbake' outside the main git repository will ease project
management significantly. Now, you can put everything into git submodules,
clone the project with
| git clone --recursive ...
and continue immediately with
| ..../oe-init-build-env
E.g. when you had previously
| .
| |-- build/
| `-- sources/
| `-- org.openembedded.core/
| `-- bitbake -> ../bitbake
(where 'bitbake' must be created manually after cloning the project),
you can have now
| .
| |-- build/
| `-- sources/
| |-- bitbake/
| `-- org.openembedded.core/
which is completely managed by 'git'.
Patch adds $OEROOT/.. to the search path for 'bitbake'
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The intent of the env setup scripts is to set BBPATH to point at the
build directory. This means if the user changes directory, bitbake can
still find the original build directory. The default bblayers.conf files
reset BBPATH to the correct components so this is safe and restores the
behaviour the script was intended to have.
[YOCTO #12163]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the new server structure we no longer need this separate
environment init script. Just set BB_SERVER_TIMEOUT to be greater
than zero and bitbake will remain in memory and the UI will auto-reconnect
to it.
Also clean out the old shutdown code from oe-init-build-env which
also doesn't make sense now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Show usage text if script is not sourced.
Tested in bash, zsh and dash.
[YOCTO #10751]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you check out OE-Core and then run oe-init-build-env you get an error
about not having bitbake checked out in a "bitbake" subdirectory,
however it's possible to specify the bitbake path on the
oe-init-build-env command line, so hint at that in the error message
rather than implying it has to be in the default location.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If BB_SETSCENE_ENFORCE is set to "1" and an sstate package fails to
download outside of the whitelist specified by
BB_SETSCENE_ENFORCE_WHITELIST, then fail immediately so you can tell
that the problem was caused by failing to restore the task from sstate.
Part of the implementation of [YOCTO #9367].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Check that 'python' is a python v2 since that is what we assume everywhere
and upstream python devs recommend. We can need both python2 and python3
available since we don't control the software we might download and run.
Also check that python 3 is >= 3.4.0, our minimum version for bitbake.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So that user can easily make their own conf files such as conf/site.conf
work. For example, poky's default BBPATH in bblayers.conf is:
BBPATH = "${TOPDIR}"
Will change it to:
BBPATH_EXTRA ??= ""
BBPATH = "${BBPATH_EXTRA}${TOPDIR}"
When user sets BBPATH_EXTRA in env to their own dir which contains
conf/site.conf, it will work.
Note, BBPATH_EXTRA must end with ":", we can't set BBPATH as
"${BBPATH_EXTRA}:${TOPDIR}" since the sanity would fail when
BBPATH_EXTRA is null.
[YOCTO #7837]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The commit OE-Core:ada4639 (oe-buildenv-internal: simplify derivation
of BB_ENV_EXTRAWHITE) changed the format of BB_ENV_EXTRAWHITE
variable to:
,----
| BB_ENV_EXTRAWHITE='ALL_PROXY
| BB_NO_NETWORK
| BB_NUMBER_THREADS
| ...
| '
`----
Instead of:
,----
| BB_ENV_EXTRAWHITE='ALL_PROXY BB_NO_NETWORK BB_NUMBER_THREADS...'
`----
The old format allow for external script parsing easier and there is
no need to change the format as it has no benefit from usage
perspective.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use 'sort --unique' to combine the two lists and remove duplicates.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, the code that adds paths to $PATH could cause it to end
up with a trailing : which would then cause an error from the sanity
checker.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Consistent indentation (four spaces)
* Use [ -z ...] and [ -n ... ] where possible
* Unset temporary variables
* Use $(...) instead of `...`
* Avoid an unnecessary call to expr
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of adding all variables to BB_ENV_EXTRAWHITE as one, treat
them separately and add them one by one as needed.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of assuming that the path to the scripts directory always is
in $PATH directly before the bitbake directory, treat them as separate
paths and add them individually to $PATH.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The script oe-buildenv-internal is called from oe-init-build-env.
Make sure oe-init-buildenv does not return an error if BB_ENV_EXTRAWHITE is
already set, otherwise this will cause oe-init-build-env to fail.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
According to the BitBake User Manual the environment variable BB_ENV_EXTRAWHITE
specifies an additional set of variables to allow through (whitelist) from the
external environment into BitBake's datastore. However, running:
$ source oe-init-build-env build-name
will overwrite any pre-existing BB_ENV_EXTRAWHITE variables.
This patch modifies this behaviour: all oe-build-internal BB_ENV_EXTRAWHITE
variables are appended to any potentially already existing BB_ENV_EXTRAWHITE
variables. (The variables are only appended if not already in BB_ENV_EXTRAWHITE)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The oe-buildenv-internal script checks if the user is already in an sdk
environment and errors if true. Add a way to skip this check.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This script is sourced so we should return, not exit.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're finding bugs in python 2.6 and starting to require unittest
functionality in python 2.7.x. Its time to bump the minimum version
requirement. Anyone without python 2.7.x can use the buildtools-tarball
out to install a standalone python/git/tar setup which will work
with the system.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In preparation for removal of the bitbake wrapper script, move the
python version checks to the environment script. There are also
checks within bitbake itself but these may not always function
correctly on every version of python so this is really insurance.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
First strip $PATH of any existence of the paths needed by Open Embedded
and BitBake. Then add the needed paths at the beginning. This makes sure
the needed paths are searched first, without growing $PATH unnecessarily
if oe-init-build-env is rerun for a directory for which it has
previously been run.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If $PATH already has the needed paths at the beginning, there is no need
to add them again. This allows rerunning oe-init-build-env for the same
directory without having $PATH increase unnecessarily every time.
Signed-off-by: Peter Kjellerstedt <pkj@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add STAMPS_DIR for constructing STAMP, the defination of STAMP is:
STAMP = "${TMPDIR}/stamps/${MULTIMACH_TARGET_SYS}/${PN}/${EXTENDPE}${PV}-${PR}"
We can only change the TMPDIR if we want to change the STAMP's location,
but the bb_cache.dat would be regenerated if TMPDIR changes, so add
STAMPS_DIR for constructing it, and add it to the BB_ENV_EXTRAWHITE,
this is very usefull for the "bitbake -S", since then it can be run by:
STAMPS_DIR=<path> bitbake -S <recipe>
which will avoid putting the stamps to ${TMPDIR}/stamps.
BTW, break the too long BB_ENV_EXTRAWHITE into several lines.
[YOCTO #1659]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Applications are inconsistent in their use of upper and lower case proxy
variables. Curl, for example, specifies NO_PROXY (not no_proxy) in the
man page (changed in 2009 [1]). Avoid proxy issues by ensuring both the
upper and lower case versions of each proxy variable are available in
the environment for the fetcher commands.
Add FTPS_PROXY and ftps_proxy to the list as well.
1. http://curl.haxx.se/mail/tracker-2009-04/0012.html
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following variables perform no function outside of bitbake:
GIT_CONFIG
GIT_PROXY_HOST
GIT_PROXY_PORT
GIT_PROXY_IGNORE
GIT_CONFIG only affects the git-config command which is not relevant to
the fetcher. This was previously used with the OE GIT_CORE_CONFIG
variable which would provide a basic git config to use instead of the
user's config. This usage was deprecated by git for over a year now:
http://git.661346.n2.nabble.com/Overriding-gitconfig-using-GIT-CONFIG-td6680977
GIT_PROXY_HOST and GIT_PROXY_PORT are not used by git.
GIT_PROXY_IGNORE was an OE construct used to create the custom git
config and had no meaning outside of the OE environment. It is not used
by git.
Remove these variables from the fetcher environment.
Users wishing to configure git to work with a proxy should define the
GIT_PROXY_COMMAND environment variable to use an external script.
NO_PROXY can be used within this script to skip the proxy for certain
hosts.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows for use of bitbake in offline mode, but override it in
command line.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The SDK/ADT may ship with a python installed which may not have all the modules
need for a bitbake build. We should therefore detect if its already present in the
environment and error out in this case, asking the user to use a clean environment.
This also removes the potential for any other conflict between the two.
[YOCTO #2979]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
autobuilder scritpts
The BITBAKEDIR change does not work well when the script is sourced from another script
since $2 may be unrelated. This change adds the logic onto the BDIR conditional and
which more external scripts would set, hence avoiding the problem.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Having bitbake inside the oe-core is annoying to some people. This commit
adds a second option to the oe-init-build-env script.
Run like this:
. ./oe-init-build-env ../build ../bitbake
for example. Without the second option, the old behavior is preserved.
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some versions of the screen utility provided from the host OS vendor
write the socket directory to $HOME/.screen. When using a shared home
directory across many servers, one sets the SCREENDIR environment
variable to avoid collisions in the shared home directory. This
results in problems launching a devshell where it is not entirely
obvious what happened because the SCREENDIR environment variable
got stripped from the environment prior to setting up the screen
in detached mode.
Example:
% bitbake -c devshell busybox
# ...Please connect in another terminal with "screen -r devshell"
% screen -r devshell
There is no screen to be resumed matching devshell.
The temporary work around was to do something like:
sh -c "unset SCREENDIR; screen -r devshell"
This patch adds SCREENDIR to the white list to ensure screen
works properly on systems where a developer needs to use
the SCREENDIR with shared home directories.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Typoes fixed: "enviroment", "editted", "spliting", "scheulder".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a SOCKS5 gateway is needed for a proxy access like git it might also
require authentication to the proxy via a password and username. Adding
SOCKS5_USER & SOCKS5_PASSWD to BB_ENV_EXTRAWHITE allow for automation
of the authentication request to occur when something like a git fetch
is going through the proxy.
This patch requires the bitbake patch to add extra exportvars so
these variables get passed from Env -> bitbake -> fetcher
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous fix for a bug in Ubuntu 10.04 readlink,
be2a2764d8ceb398d81714661e6f199c8b11946c, notified the user when a trailing
slash was used. As there is no semantic difference, simply remove any
trailing slashes and proceed without nagging the user.
See [YOCTO #671] for more details.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
[YOCTO #671]
"readlink -f" in Ubuntu 10.04 is buggy: it doesn't ignore a trailing / (e.g.,
"readlink -f /tmp/non-existent-dir/" returns nothing, but according to
http://www.gnu.org/s/coreutils/manual/coreutils.pdf it should do that --
hence we get bug 671. It seems Ubuntu 10.10 or even later Ubuntu 11.04,
and other Linux distributions(e.g., Open Suse 11.4) haven't such an issue.
So I think we should detect this and ask Ubuntu 10.04 users to avoid supply
a path with trailing slash here.
Moreever, I also add the detection of non-existent path, e.g.,
source oe-init-build-env /non-existent-dir/build
can be detected and we'll print an error msg.
And, if we get errors in oe-buildenv-internal, we should stop the script
and shouldn't further run.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are new variable names in oe-core
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
As BB_NUMBER_THREADS is already whitelisted, it is consistent to
also allow PARALLEL_MAKE to be overridden via the environment. This
also simplifies performance testing where multiple combinations of
those two variables are a natural thing to do.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Enrico Scholz
Ed Bartosh
Paul Eggleton
Robert Yang
Otavio Salvador
Andre McCurdy
Peter Kjellerstedt
Peter Kjellerstedt
Juro Bystricky
Randy Witt
Darren Hart
Philip Balister
Jason Wessel
Robert P. J. Day
Kumar Gala
Dexuan Cui
Khem Raj