| Age | Commit message (Collapse) | Author |
|---|
|
The layer checks are designed to work with OEBasicHash so ensure that handler
is in use rather than the new hash equivalency one as an example.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using different root directories with a wks file wic is using the
value from the original ROOTFS_SIZE which is not correct. Example:
Number Start End Size File system Name Flags
1 20.5kB 318MB 318MB fat16 otaefi legacy_boot, msftdata
2 318MB 636MB 318MB ext4 otaboot
3 636MB 1709MB 1074MB ext4 otaroot
4 1709MB 2027MB 318MB ext4 otaboot_b
5 2027MB 3101MB 1074MB ext4 otaroot_b
6 3101MB 5249MB 2147MB ext4 fluxdata
The partitions 1, 2, and 3 incorrectly inherit the size, instead of using
a computed size. With the patch applied it is working properly:
Number Start End Size File system Name Flags
1 20.5kB 14.5MB 14.5MB fat16 otaefi legacy_boot, msftdata
2 14.5MB 65.3MB 50.8MB ext4 otaboot
3 65.3MB 1139MB 1074MB ext4 otaroot
4 1139MB 1190MB 50.8MB ext4 otaboot_b
5 1190MB 2264MB 1074MB ext4 otaroot_b
6 2264MB 4411MB 2147MB ext4 fluxdata
As for the removal of the bb.warn, if the size is not specified, it is
not something to warn the end user about. Some of my default images
make use of the head room + a computed directory size or while generating
images.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to create a msdos partition table disk image that can auto
expand after the image is copied to an SD card, wic needs the ability
to have a primary partition as the last entry. The desired use case
is to be able to create an A/B update partition image scheme with a
/var volume that can be auto expanded to the remainder of the SD card
at run time.
The typical .wks file will look similar to the following:
bootloader --ptable msdos
part / --source rawcopy --sourceparams="file=u-boot.imx" \
--ondisk mmcblk --no-table --align 1 --size 1
part /boot --source bootimg-partition \
--ondisk mmcblk --fstype=vfat --label boot --active --align 4 --size 16
part / --source rawcopy --sourceparams="file=imx6_boot.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaboot --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaroot --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6_boot.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaboot_b --align 4 --type logical
part / --source rawcopy --sourceparams="file=imx6.otaimg" \
--ondisk mmcblk --fstype=ext4 --label otaroot_b --align 4 --type logical
part /var --source rawcopy --sourceparams="file=imx6_var.otaimg" \
--ondisk mmcblk --fstype=ext4 --label fluxdata --align 4
Without the patch applied, wic will generate an SD card image that looks like:
Disk boot.img: 890940s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 2056s 48001s 45946s primary fat16 lba
2 48008s 132467s 84460s primary ext4
3 132472s 454467s 321996s primary ext4
4 454471s 890939s 436469s extended lba
5 454472s 538931s 84460s logical ext4
6 538936s 860931s 321996s logical ext4
7 860936s 890939s 30004s logical ext4 boot
With the patch applied a primary partition can be created at the end
of the image which can be expanded to fill the free space on the media
where the image has been copied, which looks like:
Disk boot.img: 890940s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 2056s 48001s 45946s primary fat16 lba
2 48007s 860931s 812925s extended lba
5 48008s 132467s 84460s logical ext4
6 132472s 454467s 321996s logical ext4
7 454472s 538931s 84460s logical ext4
8 538936s 860931s 321996s logical ext4
3 860936s 890939s 30004s primary ext4 boot
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a source plugin that support both EFI and legacy PC-Bios.
While using this plugin, both bootloaders configurations reside
in the same /boot partitions.
This plugin has very little code : to avoid code duplication,
we simply re-import bootimg-pcbios and bootmg-efi source and
call both their SourcePlugin methods.
Signed-off-by: William Bourque <wbourque@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For now, the temp dir is left in system, although the temporary
source directory has been cleaned up. So we clean it up too.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit 450335ba5e73a375eb9932b4c4cf37979640dbfc copies the pseudo
database to the working directory in order to have ownership information
when the filesystem is generated.
Unfortunately this does not work anymore. The filenames on the database
are absolute and there is no information about the new directory.
Instead of fixing the database, we could redo a bit the way we patch the
fstab file. Now I am saving the old contents of fstab, modifying the
file and then reverting the changes on exit.
This is faster than the previous approach, although it can cause
indeterminism if the application is killed before finishing.
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
when INITRAMFS_IMAGE_BUNDLE and INITRAMFS_IMAGE are set, wic should
look for kernel with initramfs image bundled.
Include required variable MACHINE, INITRAMFS_IMAGE_BUNDLE,
INITRAMFS_IMAGE, INITRAMFS_LINK_NAME and KERNEL_IMAGETYPE in WICVARS.
No longer require default value for variable kernel as KERNEL_IMAGETYPE
is not optional variable and included in WICVARS.
image_types_wic to inherit kernel-artifact-names to obtain default
INITRAMFS_LINK_NAME when INITRAMFS_IMAGE_BUNDLE are set.
update wic.Wic2.test_image_env test case to filter optional
variable INITRAMFS_LINK_NAME, INITRAMFS_IMAGE and INITRAMFS_IMAGE_BUNDLE.
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a command line option to filter out the buildstats-diff report by
one more more tasks. e.g.:
buildstats-diff --only-task do_compile A B
will only show the differences for do_compile tasks. The --only-task
option can be specified multiple times to filter out multiple tasks at
once.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All packages that support the menuconfig task will be able to run
devtool menuconfig command. This would allow the user to modify the
current configure options and create a config fragment which can be
added to a recipe using devtool finish.
1. The patch checks if devtool menuconfig command is called for a valid
package.
2. It checks for oe-local-files dir within source and creates one if
needed, this directory is needed to store the final generated config
fragment so that devtool finish can update the recipe.
3. Menuconfig command is called for users to make necessary changes.
After saving the changes, diffconfig command is run to generate the
fragment.
Syntax:
devtool menuconfig <package name>
Ex: devtool menuconfig linux-yocto
The config fragment is saved as devtool-fragment.cfg within
oe-local-files dir.
Ex:
<workspace_path>/sources/linux-yocto/oe-local-files/devtool-fragment.cfg
Run devtool finish to update the recipe by appending the config fragment
to SRC_URI and place a copy of the fragment within the layer where the
recipe resides.
Ex: devtool finish linux-yocto meta
[YOCTO #10416]
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
not present
If kernel source is not already downloaded i.e staging kernel dir is
empty, place a copy of the source when the user runs devtool modify
linux-yocto. This way the kernel source is available for other packages
that use it.
[YOCTO #10416]
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
if its already downloaded
In the regular devtool modify flow, the kernel source is fetched by
running do_fetch task. This is an overhead in time and space.
This patch updates modify command to check if the kernel source is
already downloaded. If so, then instead of calling do_fetch, copy the
source from work-shared to devtool workspace by creating hard links
else run the usual devtool modify flow and call do_fetch task.
[YOCTO #10416]
Signed-off-by: Sai Hari Chandana Kalluri <chandana.kalluri@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of upgrading a recipe we create the upgraded recipe file in the
workspace and then try to parse it so we can then make further
modifications. If for some reason that parsing fails then the failure
was not being handled very well - the broken recipe was being left in
place, breaking parsing until it was removed by hand. Fix that by adding
a call to the cleanup function, and fix the following issues:
* Fix the cleanup function which doesn't look like it has ever worked
due to a typo in the function call
* Fix double-printing the error message
* Remove usage of DevtoolError in this case (DevtoolError is for simple
usage errors, not this kind of issue which may be the result of a
bug).
We're still printing a traceback in this scenario but at least it
doesn't break the build system requiring manual cleanup. I also
introduced a command-line option to preserve the broken upgraded recipe
file(s) for debugging purposes.
(The reproducer for this is "devtool upgrade libnewt-python", however
you need to check out revision b82ea144e144671d3f64c0785ba4beafe905cd4f
or earlier since that recipe has now been absorbed into the libnewt
recipe. The libnewt-python recipe was causing an issue with the upgrade
because it actually included the libnewt recipe using ${PV} in the
include statement, and of course PV was changing in the upgrade.)
Fixes [YOCTO #13404].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a setup.py file exists it ought to have something in it before we
consider the source tree to be a Python module and treating it as such.
(A counter-example is https://www.bro.org/downloads/binpac-0.50.tar.gz -
it's not clear why this has a zero-length setup.py in it but we should
pay no attention to it.)
Fixes [YOCTO #12923].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This switches the code to build pkgdata specific to the current recipe
which means that its filtered to the recipes dependencies and can perform
better as we can drop the lockfile.
It uses a similar method to the staging code to do this, using BB_TASKDEPDATA
to construct a list of packagedata task output which this recipe should "see".
The original pkgdata store is left unaltered so existing code works.
The lock file was there to prevent files disappearing as they were read or as
directories were listed. Since we have a copy of the data and only access output
from completed tasks (as per their manifests), we can remove the lock.
The lock was causing starvation issues on systems with parallelism.
There was also a potential determinism problem as the current code could "see"
data from recipes which it doesn't depend upon.
[YOCTO #13412]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently `devtool finish RECIPE meta' will silently succeed even
if there are multiple layers having the same base name of 'meta'.
e.g. meta layer from oe-core and meta layer from meta-secure-core.
We should at least give user a warning in such case. With the patch,
we will get warning like below.
WARNING: Multiple layers have the same base name 'meta', use the first one '<PROJ_DIR>/oe-core/meta'.
WARNING: Consider using path instead of base name to specify layer:
<PROJ_DIR>/oe-core/meta
<PROJ_DIR>/meta-secure-core/meta
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow plugin bootimg-efi to configure with multiple initrd
through source parameter.
Uses ; to separate each initrd.
e.g:
--sourceparams="loader=${EFI_PROVIDER},initrd=initrd1;initrd2"
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current QA team need to merge test result files from multiple sources.
Adding TESTSERIES configuration too early will have negative
implication to report and regression. Enable control to add TESTSERIES
when needed. Also enable adding EXECUTED_BY configuration when
needed.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current results stored does not have information needed to trace who
executed the tests. Enable store to add EXECUTED_BY configuration
to results file in order to track who executed the tests.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current resultutils library always add "TESTSERIES" configuration
to results. Enhance this to allow control of adding "TESTSERIES"
configuration as well as allow adding extra configurations
when needed.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
replaced hardcoded kernel image with KERNEL_IMAGETYPE.
set kernel image to "bzImage" incase KERNEL_IMAGETYPE not set.
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for generating python3 recipes using the recipetool / devtool.
Drop python2 support at the same time.
Tested with:
oe-selftest -r recipetool.RecipetoolTest
[YOCTO #13264]
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some file systems don't support fetching the block size (notably the file system
Docker uses for containers), so handle the iotctl() failing and raise the
expected error.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
allow wic to list and search for kickstart file in .wks.in extension.
basename show by wic list images to fully exclude extension.
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Printing the lack of a test is not necessary (per feedback). Remove
this from the template to quieten it.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the creation of test case configuration file based on user inputs.
Where this testcase configuration file will be used by the the manual
execution to run selected test cases for a module rather than compulsory
run all test cases in manual json file.
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, the code will sum all of the different machine results into a
single report of the tests results. This can lead to confusion as to
which machine may be experiencing issues. Modify the code to store the
results in a per machine basis and report them accordingly.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add new source parameter label to allow custom boot.conf/grub.cfg label,
so far it's hardcoded to "Boot".
Default label to "Boot" for systemd-boot and blank for grub-efi when source
parameter label are not set.
Signed-off-by: Chee Yang Lee <chee.yang.lee at intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
volume name should refer to --label in .wks.
Replace the hardcoded volume name with label.
set "ESP" as default name when no lable specified.
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds SPDX license headers in place of the wide assortment of things
currently in our script headers. We default to GPL-2.0-only except for the
oeqa code where it was clearly submitted and marked as MIT on the most part
or some scripts which had the "or later" GPL versioning.
The patch also drops other obsolete bits of file headers where they were
encoountered such as editor modelines, obsolete maintainer information or
the phrase "All rights reserved" which is now obsolete and not required in
copyright headers (in this case its actually confusing for licensing as all
rights were not reserved).
More work is needed for OE-Core but this takes care of the bulk of the scripts
and meta/lib directories.
The top level LICENSE files are tweaked to match the new structure and the
SPDX naming.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds an option to dump all the ptest logs to individual files in a
specified directory. If multiple test runs are present, the
'--prepend-run' argument will create separate directories for each test
run under the target directory and put the logs there to prevent each
test run from clobbering the others.
[YOCTO #13331]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If attempting to find a fixed SRCREV fails because the directory doesn't exit,
avoid failing with:
Traceback (most recent call last):
File "/home/vagrant/poky/scripts/recipetool", line 121, in <module>
ret = main()
File "/home/vagrant/poky/scripts/recipetool", line 110, in main
ret = args.func(args)
File "/home/vagrant/poky/scripts/lib/recipetool/create.py", line 707, in create_recipe
srcrev = stdout.rstrip()
UnboundLocalError: local variable 'stdout' referenced before assignment
Fixes: 000480c42797 ("recipetool / devtool: set a fixed SRCREV by default when fetching from git")
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required user to exceute all test cases defined inside a "modulename.json" file in oeqa/manual
There are cases when all test cases all not required to run for a module on specific DUT.
Enable manualexecution to have the optional feature where it will use pre-defined json format test case configuration file
where user will be able to select test cases from the "modulename.json" instead of running all of them. This will help
in reducing testing time and reporting unneccesary skip or failures.
Example pre-defined json format test case configuration file (for build-applince):
{
"testcases" : [
"build-appliance.build-appliance.Create_core-image-sato-sdk_using_build_appliance",
"build-appliance.build-appliance.Build_a_image_without_error_(added_recipe)"
]
}
Signed-off-by: sangeeta jain <sangeeta.jain@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit f7dfb4d43247d3c13a4e0a3853007d63b9512b83.
FAT16 volumes do not have a minimum size of 8250 blocks
(== slightly over 4MB). Exhibit A: floppy disks.
The original commit message suggests this was a workaround for a bug in
parted - in which case we should fix it there, or use the wic
`--fixed-size` option to pass down an enforced minimum from a more
context-aware point in the callstack.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix AttributeError: module 'urllib' has no attribute 'request' when
using remote http urls.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a subcommand for dumping various logs from test results
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds support for resulttool to load JSON files directly from a http://
or https:// URL
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove duplicate codes. Replace unnecessary class variables with
local variables. Rename variables and arguments with simple and
standard name.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When I use recipetool to add a new recipe, it says:
[snip]
sys.exit(14)
NameError: name 'sys' is not defined
[snip]
Signed-off-by: Lei Yang <Lei.Yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow the creation of configuration option file based on user inputs.
Where this configuration option file will be used by the the manual
execution to display options for configuration rather than user
need to inputs configuration manually.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required user to input configuration manually
where there were inconsistent inputs and human typo issues.
Enable manualexecution to have the optional feature where it
will use pre-compiled configuration options file where user will
be able to select configuration from the pre-compiled list instead
of manual key-in the configuration. This will eliminate human error.
Expect the pre-compiled configuration options file in json format below
{
"bsps-hw": {
"IMAGE_BASENAME": {
"1": "core-image-sato-sdk"
},
"MACHINE": {
"1": "beaglebone-yocto",
"2": "edgerouter",
"3": "mpc8315e-rdb",
"4": "genericx86",
"5": "genericx86-64"
}
},
"bsps-qemu": {
"IMAGE_BASENAME": {
"1": "core-image-sato-sdk"
},
"MACHINE": {
"1": "qemuarm",
"2": "qemuarm64",
"3": "qemumips",
"4": "qemumips64",
"5": "qemuppc",
"6": "qemux86",
"7": "qemux86-64"
}
}
}
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The cml1 and ccmake bbclasses generate configuration fragment source
files that must be exported from the WORKDIR as a source file to be
preserved across builds. This change adds detection of the current
recipes inherited classes and for cml1 and ccmake classes checks for the
specific generated configuration fragment files. These files are then
exported by devtool and included as SRC_URI files from within the target
layer.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Simplify and removed unnecessary codes.
Refactor to allow pythonic loop.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the manual execution display step by sorting
the step as string, where steps were not being sorted
correctly when there are more than 9 steps.
Fixed the step sorting by sorting step as integer.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current manualexecution required pressing enter button to show each step
information, where this was wasting execution time. Enable display
full steps without needing to any press enter button.
Signed-off-by: Mazliana <mazliana.mohamad@intel.com>
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current input checking does not match the standard input practiced
by QA team. Change the input checking to match the standard
input practiced by the QA team.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than simply discarding the ptest data, change the code to discard
it when writing out the new testresult files, or optionally either preserve
it, or write it as seperate discrete logs.
This means the autobuilder should start writing out individual ptest log
files as well as allowing ueers to extract these manually.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Jason Wessel
William Bourque
Chen Qi
Ricardo Ribalda Delgado
Chee Yang Lee
Joshua Watt
Sai Hari Chandana Kalluri
Ross Burton
Paul Eggleton
Robert Yang
Yeoh Ee Peng
Maciej Pijanowski
Jon Mason
sangeeta jain
Alex Kiernan
Armin Kuster
Angus Lees
Lei Yang
Nathan Rossi