| Age | Commit message (Collapse) | Author |
|---|
|
There's no reason to have that rootfs.img filesystem in the image:
it's not used for anything because both the EFI and legacy boot paths
use the /initrd which contains the same contents as the rootfs.img,
only compressed. It was probably forgotten in there :)
My iso went down from 224 to 94 mb.
Tested using UEFI/legacy boots on CD-roms, usb dongle and qemu VM's.
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's really good that OE supports multiple EFI_PROVIDERs and that
commit 9a1709278de87 ("wic: isoimage-isohybrid: use grub-efi from
deploy dir") makes re-use of the grub-efi built image, but we should
still respect the standard otherwise the ISO will not boot, so install
grub images as boot[x64|ia32].efi not ${PN}-boot[x64|ia32].efi.
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make sure that we're able to use the initrd value specified in the wks
file when using grub-efi bootloader with bootimg-efi wic plugin.
Fixes [YOCTO #12689]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When a wks makes reference to multiple rootfs, libspeudo data is not
properly chossen. This results in filesystems with invalid UIDs for all
the files.
This can be tested with this .wks file:
part / --source rootfs --fstype=ext4 --rootfs-dir=core-image-base
part /mnt/data1/ --fstype=ext4 --source rootfs --rootfs-dir=core-image-minimal
part /mnt/data2/ --fstype=ext4 --source rootfs --rootfs-dir=core-image-minimal
And this script
$bitbake core-image-minimal core-image-base syslinux
$losetup --partscan --find --read-only --show test*direct
$sudo mount /dev/loop0p1 /mnt
$ls -lan /mnt
otal 40
drwxr-xr-x 18 0 0 1024 May 11 16:11 .
drwxr-xr-x 25 0 0 4096 May 6 06:31 ..
drwxr-xr-x 2 1000 1000 3072 May 11 15:51 bin
drwxr-xr-x 2 1000 1000 1024 May 11 13:59 boot
drwxr-xr-x 2 1000 1000 1024 May 11 13:59 dev
drwxr-xr-x 25 1000 1000 3072 May 11 15:51 etc
drwxr-xr-x 3 1000 1000 1024 May 11 13:59 home
drwxr-xr-x 6 1000 1000 3072 May 11 15:51 lib
drwx------ 2 0 0 12288 May 11 16:11 lost+found
drwxr-xr-x 2 1000 1000 1024 May 11 13:59 media
drwxr-xr-x 3 1000 1000 1024 May 11 15:50 mnt
drwxr-xr-x 2 1000 1000 1024 May 11 13:59 proc
drwxr-xr-x 2 1000 1000 1024 May 11 15:51 run
drwxr-xr-x 2 1000 1000 3072 May 11 15:51 sbin
drwxr-xr-x 2 1000 1000 1024 May 11 13:59 sys
drwxr-xr-t 2 1000 1000 1024 May 11 13:59 tmp
drwxr-xr-x 10 1000 1000 1024 May 11 14:54 usr
drwxr-xr-x 8 1000 1000 1024 May 11 14:55 var
$sudo losetup -d /dev/loop0
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This changes the output of "wic create mkefidisk -e core-image-sato" from:
The following build artifacts were used to create the image(s):
ROOTFS_DIR: /media/build1/poky/build/tmp.wic.ybraavmb/rootfs_copy
to:
The following build artifacts were used to create the image(s):
ROOTFS_DIR: /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r0/rootfs
which s much less confusing for the user.
[YOCTO #12564]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The partition plugin is used as the base for other plugins.
One of the methods the plugins use, is the prepare_rootfs
method.
The prepare_rootfs method wrongly assumes that the value
ROOTFS_SIZE from bitbake datastore is relevant to every
invocation of prepare_rootfs, which it clearly is not, for
example in the bootimg-partition case.
This commit adds an optional argument to prepare_rootfs
where a caller can tell prepare_rootfs if it is an actual
rootfs and whether related rootfs information retrieved from
bitbake is valid. The default behavior of this optional
argument is to assume that the invocation is an actual
rootfs, to maintain compatibility with previous
implementations.
Signed-off-by: Paulo Neves <ptsneves@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
First, allow for wic to be given a filesystem UUID to be used when
creating a filesystem. When not provided, wic will generate the UUID to
be used. Next, when --use-uuid is passed, we update the fstab to mount
things via UUID (and if not found, then use PARTUUID) as UUID is more
portable.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The '--label' argument should work for '--source rawcopy' as it does for
'--source rootfs', so add a method in RawCopyPlugin to update the label
on the temporary filesystem images.
Signed-off-by: Martin Hundebøll <mnhu@prevas.dk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When we have been told to use the UUID we should also update the fstab
to make use of PARTUUID instead of hard-coding the device in question.
This will make the resulting image much more portable.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The WIC's 'part' can now give a name for GPT partition in WKS file.
It's similar to '--label', but is naming partintions instead file systems.
It's required by some bootloaders to partitions have specified names.
Signed-off-by: Artur Mądrzak <artur@madrzak.eu>
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Create an option to wic doesn't change fstab file, the final
fstab file will be same that in rootfs and wic doesn't update
file, e.g adding a new mount point.
Users can control the fstab file content in base-files recipe.
This is useful if you want to only create an partition but not
add fstab mount point or add new mount point using label e.g:
LABEL=recovery /recovery auto defaults 0 1
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It can be useful to have multiple partitions with '--source bootimg-partition'
but different content.
E.g. for TI AM335x, one boot partition can contain an first stage
bootloader ("MLO"), while the real bootloader and kernel plus devicetree
are in another one.
Patch allows to specify multiple IMAGE_BOOT_FILES with optional "_label-XXX"
or "_uuid-XXX" overrides.
E.g. with this patch, a .wks file with
| part --source bootimg-partition ... --label=mlo --active
| part --source bootimg-partition ... --label=boot0
| part --source bootimg-partition ... --label=boot1
and a recipe with
| IMAGE_BOOT_FILES_label-mlo = "\
| MLO-${MACHINE}.img;MLO \
| "
|
| IMAGE_BOOT_FILES_label-boot0 = "\
| u-boot-${MACHINE}.img;u-boot.img \
| zImage \
| "
|
| IMAGE_BOOT_FILES_label-boot1 = "${IMAGE_BOOT_FILES_label-boot0}"
|
| WICVARS += " \
| IMAGE_BOOT_FILES_label-mlo \
| IMAGE_BOOT_FILES_label-boot0 \
| IMAGE_BOOT_FILES_label-boot1 \
| "
is possible. It will create one partition with the MLO and two redundant
ones with the uboot + kernel.
Signed-off-by: Enrico Scholz <enrico.scholz@ensc.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Modified wic code to run bmaptool using native Python3
from wic-tools native sysroot.
[YOCTO #11891]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This should reduce the chance of generating 0xffffffff as the disk
system identifier.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Zero may be interpreted as no MBR signature present and another
partitioning program might install a new MBR signature.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic avoided adding /boot to fstab for no reason.
This exception was hardcoded in the wic code.
There is no need for this as mountpoint in .wks file is an optional
field. It can be used only if user wants to have partitions
automatically mounted on system boot.
[YOCTO #11662]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used unique suffix (line number from .wks file) for the
copied rootfs directory to avoid possible conflicts.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic gets rootfs paths from partition object property
'rootfs_dir' and shows them in final report.
rootfs plugin sets this property to the temporary path,
which causes temporary paths appearing in the report.
Changed the code to prevent storing temporary rootfs path
in part.rootfs_dir. This should fix the report.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using relative paths can cause copyhardlinktree API to fail as
it changes current directory when working. Converted all paths
to absolute paths using os.path.realpath.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
wic updates /etc/fstab on root partition if there are
valid mount points in .wks
When wic runs from bitbake this can cause incorrect results
or even breakage of other tasks working with the same rootfs
directory in parallel with do_image_wic.
Implemented copying rootfs directory to a temporary location
using copyhardlinktree before updating fstab to avoid conflicts with
other tasks working with the same rootfs directory.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Total number of partitions should be taken into account when calculating
real partition number for msdos partition table. The number can be
different for the 4th partition: it can be 4 if there are 4 partitions in
the table and 5 if there are more than 4 partitions in the table. In the
latter case number 4 is occupied by extended partition.
[YOCTO #11790]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
isoimage-isohybrid plugin tries to build grub-efi in its working
directory if it can't find efi binary. Wic should avoid doing anything
in working directories of other recipes. It should use artifacts from
the image deployment directory instead.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
isoimage-isohybrid plugin uses result of glob call to
get path to initrd image. When glob returns empty list
the plugin crashes with IndexError.
Checking if result of glob call is not empty should fix
the breakage.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Removed isodir subrdirectory instead of removing temporary
working directory as working directory can contain copy of
rootfs partition and shouldn't be removed by any plugin.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
At the moment, when building images with IMAGE_FSTYPES=wic one ends up
depending on wic-tools and thus syslinux and grub-efi even when not
using those at all. Ideally, building an image with wic should only
build the tools and components really needed.
The problem is that "wic-tools" is needed also for the manual
invocations of wic, in which case everything that might be needed has to
be built in advance.
Replaced dependency on wic-tools with dependency to a much shorter set
of tools that wic uses almost for any image: 'parted', 'gptfdisk',
'dosfstools' and 'mtools'.
[YOCTO #11552]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Wic updates fstab if mount points are specified in .wks.
After partition images are created the original fstab is restored.
However, if exception is raised when partition image being prepared
wic doesn't restore original fstab. This can cause duplication of
added lines in fstab when 'wic create' runs next time.
Wrapping call of 'prepare' method and restoring original fstab
even if exception occurs should fix this.
[YOCTO #11633]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Split long lines.
Removed unused imports.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Moved misc.py from wic/utils/ to wic/
Removed wic/utils directory
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Renamed parameter offset->skip to match names of dd
parameters.
Changed affected sparse_copy calls.
Added explanation of the parameters to docstring.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Plugin code uses boot.img file name for an image file. If there are
two partitions that use bootimg-pcbios wic breaks with an error
"file already exists: boot.img"
Made image file name unique by adding wks like number to it to fix
the issue.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was overlooked when msger was removed in 28014087b8091.
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
isoimage-isohybrid plugin fails with this error when
trying to find initrd image:
initrd = glob.glob('%s/%s*%s.%s' % (initrd_dir, image_name, target_arch, image_type))[0]
IndexError: list index out of range
as it uses TRANSLATED_TARGET_ARCH value as part of the image.
This approach stopped to work due to changes in oe core code.
initrd file name is made using MACHINE variable. wic can't get value
of this variable as it's not included into bitbake -e output.
Used basename of deploy dir as MACHINE value to fix the breakage.
(From OE-Core rev: cfbb3cc1279ea88ca3e2867f8a409c5120aa1f05)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Explicitly set system id 0x6(FAT16) for msdos partitions.
Removed old code that attempts to achieve the same result
using 'parted ... lba off'.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Restricted possible values of --fstype to the list of
supported types. This should catch incorrect values
when .wks file is being parsed.
Removed checks for empty fstype and mentioning of
unsupported fstype 'ontrackdm6aux3'.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Replaced runner.show call to exec_cmd call in bootimg-pcbios
plugin. Removed runner.show API as it's not used anywhere else.
[YOCTO #10618]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
If bootloader artifacts are not found in default bootimg_dir
use wic-tools sysroot for the same purpose. This should
prevent wic from failing if bootloader artifacts can't be
found in image native sysroot.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Removed fsimage plugin and prepare_rootfs_from_fs_image API as
they duplicate functionality of rawcopy plugin. Fsimage plugin makes
wic to remove the image artifact from deployment directory, which
can cause problems too.
[YOCTO #10618]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Partition UUID for msdos partitioning is based on a 4 bytes long
system identifier. Wic uses random number to generate system
identifier. For the numbers starting with 0 partition uuid is
shorter, which makes wic images non-bootable as kernel expects
8 charactest in PARTUUID parameter.
Padded system identifier with '0' when generating partition UUID
to make it always 8 characters long. This should fix the boot
issue.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed test failure caused by using bootimg_dir path
instead of kernel_dir to find systemd-efi bootloader:
FAIL: test_systemd_bootdisk (oeqa.selftest.wic.Wic)
...
FileNotFoundError: [Errno 2] No such file or directory:
'tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/share'
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used wic-tools STAGING_DATADIR if syslinux can't be found
in default bootimg_dir.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed do_install_disk and do_configure_partition methods from
bootimage-partition, fsimage and rawcopy plugins as they're empy
and not used.
[YOCTO #10618]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bootimg_dir is usually set to the value of STAGING_DATADIR and
kernel_dir - to the value of DEPLOY_DIR_IMAGE, so usage of
kernel_dir is more logical in bootimg-efi, bootimg-partition and
rawcopy plugins.
Replaced usage of bootimg_dir to kernel_dir in 3 above mentioned
plugins that use DEPLOY_DIR_IMAGE as a default artifact location.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changing bootimg_dir in plugins is a dangerous hack as this
value comes from wic command line and can be used by multiple
plugins.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed broken unused plugin.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't need the gap that the extended partition occupies if we
already know that we have less than five partitions. Saves up to one
full alignment of space.
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If we are both having a bootloader and a U-Boot environment file, we
can end up with two entries using "--source rawcopy" and "--no-table",
and since they reuse the same file [1], their cleanup handlers will
try to delete the same file twice. So make sure we only do it once.
[1] Although they reuse the same file, the resulting output is
correct, so it appears the file is accessed in properly sequential
order.
Signed-off-by: Kristian Amlie <kristian.amlie@mender.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Without the int() function this variable will be a string. This will led
to a error in Filemap on line 545 due wrong types.
> [...]
> File
> ".../poky/scripts/lib/wic/filemap.py", line 545, in sparse_copy
> if start < skip < end:
> TypeError: unorderable types: int() < str()
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Installed vesamenu.c32 and its dependencies to support
vesamenu ui in syslinux config.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
Replaced forgotten calls of logger.error with raising
WicError exception. Otherwise errors will be ignored.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
As PluginMgr class contains only one method it's
better to move it to pluginbase to have all plugin
related APIs in one module.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
Ioan-Adrian Ratiu
Anuj Mittal
Ricardo Ribalda Delgado
Richard Purdie
Paulo Neves
Tom Rini
Martin Hundebøll
Artur Mądrzak
Fabio Berton
Enrico Scholz
Ed Bartosh
Jonathan Liu
Kristian Amlie
Daniel Schultz