| Age | Commit message (Collapse) | Author |
|---|
|
Make UTC variable in /etc/default/rcS has effect on hwclock.sh.
This variable declares whether the Hardware Clock is kept in UTC
or local time. Default its value to "yes" and change the comment.
[YOCTO #3341]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
NOTE:
There were 2 errors in libcap.inc, the BUILD_LDFLAGS_virtclass_native
should be BUILD_LDFLAGS_virtclass-native (the "_" should be "-"),
otherwise it doesn't work, and the value was: "-Wl,rpath=...", this is
incorrect, it shoudl be: "-Wl,-rpath=..." (lacked a - ), but we don't
need this line, since it is already in the default BUILD_LDFLAGS. Remove
it and we don't need to bump the PR since we just removed a unused line.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When DISTRO_FEATURES does not contain x11, disable GTK GUI and
also don't add gtk+ to the DEPENDS
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Mesa has removed GLU from the core tree upstream, so remove it from the
Mesa build and add the separate tarball as a new recipe.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After recent changes to terminal.bbclass, variables like PATH were no longer
preserved within the devshell. This change ensures they are inherited into
the environment of devshell and PATH for example has the correct values.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If this isn't done, various terminals fail to launch correctly
with "No such file or directory" errors. This adds back the environment
manipulation removed in the addition of "custom" terminal command
support but shouldn't regress that additional functionality
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The latter variable is only applicable for target builds and could
result in passing incompatible options (and/or failing to pass
required options) to ${BUILD_CC} for a virtclass-native build.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is a race with udev where eiher the run directory can get replaced
during bootup leading to ude errors, or if the tmpfs was mounted and
populate-volatiles hasn't run, udev won't start at all.
This ensures that any tmpfs get mounted before udev starts and that the
default volatiles/run directory at least exists, fixing the races
and boot time errors caused after the recent udev upgrade.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a generated file and gets removed by "make clean" which then
causes subsequent rebuilds to fail. Also, the content in this file
is taken verbatim from COPYING (which is already in LIC_FILES_CHKSUM)
so checking it for a second time doesn't accomplish much.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The mount.sh handler attempts to prevent already-mounted filesystems
from being mounted as dynamic/removable "/media". But it misses the
case where the kernel has mounted the root filesystem (e.g. with
"root=/dev/sda1"). In that situation, /proc/mounts has a device name
of "/dev/root" instead of the proper $DEVNAME string exposed by udev.
So we must also test the root filesystem device number vs. the
$MAJOR/$MINOR udev tells us.
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The busybox defconfig lacks a stat tool, the functionality of which
cannot be reproduced in a way accessible to a shell script running in
a minimal configuration. Enable, and modify the installation path to
/usr/bin/stat to match the coreutils tool for proper alternatives
handling.
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
commit b7e184508 (lttng-2.0: fix srcrev/pv to match the recipe
filenames) removed the
lttng-sycalls-protect-is_compat_task-from-redefiniti.patch from the
SRC_URI but forgot to remove the patch itself.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd_unitdir indicates the arch independent
files which are basically scripts and unit files
and systemd wants then to be in /lib always even
when base_libdir is /lib64, hence we have to reflect
that and not use base_libdir to define it. Otherwise
on architectures where base_libdir is lib64 e.g. ppc64
or multilibbed x86_64 this wont work
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use "-" instead of "/" in "n/a" strings ("Distributor ID" and/or
"Release"), provided by `lsb_release`.
This leads to directories and subdirectories created in ./sstate-cache/
e.g. Distro-n/a/ where "Distro-n" is dir and "a" is subdir.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In the previous version, tar extraction use the --strip-component
option with "4" hard coded value.
If we set another SDKPATH, with a different depth, the sdk installation
fails.
This patch computes the level from the SDKPATH value.
Signed-off-by: Fabien Proriol <fabien.proriol@jdsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some of the ltp scripts are perl, this was not seen in the
past because ltp is normally installed in an -sdk build with
perl already there.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Present the manifest file that contains the matches for
files being installed to a location that already contains
that file. This will help to determine which is the correct
recipe to fix when this occurs.
[YOCTO #3191]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
libpulsecommon has moved into libdir/pulse.
libpulsedsp is an internal library for padsp so put that into pulseaudio-misc
along with padsp.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
proximity-helper is only used by the bluetooth-proximity module, and
gconf-helper is only used by the gconf module. Clarify the packaging and clean
up dependencies by shipping the helper binaries with the modules that spawn
them.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add explicit build-dependency on GConf as currently it's an implicit dependency
and so vunerable to races at build time.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The n32 architecture is odd, in that it's a mips64 ABI which happens
to be 32-bit. To handle this, we need something in the environment
which can be used to distinguish it. The obvious place to stash this
is the ABI suffix, so we use "n32" as an ABI suffix. This allows
a couple of improved checks:
1. In insane.bbclass, we can use "linux-gnun32" to discern that it's
okay for a mips64 binary to be a 32-bit binary in some cases.
2. In multilib_header, we can check for the n32 ABI, and use a distinct
value.
3. In siteinfo, add linux-gnun32 as a synonym for linux, similar to
what's done for linux-gnux32, and tell the mips*-linux-gnun32 variants
to pick up the corresponding mips-linux site configs.
Note that the multilib header wrapper already has n32 hooks in it, there
was just nothing creating -n32 header variants.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Update the host toolchain list, for cross-canadian toolchains, to ensure
that all of the supported multilibs are built and installed. This
dynamically generates the dependnecy set based on the current multilib
configuration.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When multilibs are enabled, there will be more then one environment
file created. We need to be sure to process each environment file.
The next function can simply use the last environment file processed
to get the magic value(s) that it requires.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Crosssdk packages are not actually multilib packages, so treat them
the same as other nativesdk packages in the multilib, base, and
classextend components.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add support for the generation of cross-canadian packages.
Each cross-canadian package has:
PN = "pkg-cross-canadian-${TRANSLATED_TARGET_ARCH}"
in order for that to be evaluated properly with multilibs enabled, it was
necessary to detect both the presence of the cross-canadian packages and
then update the vars using the OVERRIDE for the multilib. Additional checks
were made to ensure that any dependency that sais "cross-canadian" did not
get prefixed with the MLPREFIX.
Also, make sure that even when building multilib cross-canadian packages,
we only use the single SDK PACKAGE_ARCH, we don't want or need variants.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We already have avahi in OE-Core and some cursory research suggests that
avahi is preferred over this package, which has apparently not seen a
release since 2006. Nothing in OE-Core actually refers to it, so let's just
remove it.
CC: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is the final upgrade of udev. Futher upgrades will only
come in conjunction with systemd.
The v4l1 removal patch is deprecated as the bug is fixed inside udev.
There is a new patch fixing the path for default sh interpreter.
New debug binaries are generated, and udev.inc is modified to package
those correctly.
The install locations changed for udevd and udevadm, so the scripts
are updated accordingly.
(From OE-Core rev: 3cbe52b94c4d559a037347ac419fafee5af84fe6)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Conflicts:
meta/recipes-core/udev/udev_164.bb
sgw - Fixed up DEPENDS += and added some OECONF options that where in the
meta-oe version and make sense to be included.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If diffutils rebuilds it tries to remove with "rm" files that don't exist
anymore, resulting in an error.
Use rm -f so the removal always succeeds.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update dependencies for perl modules again. When only install
perl-module-file-glob, run perl script with "require File::Glob;" will
fail. Update dependencies to fix that.
[Yocto 3069]
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cogl and clutter explicitly rely on libdrm being present when using the glx
backend. If its not listed in DEPENDS and an alternative to mesa is used, it
may not actually be present. This patch ensures it is and fixes a build
race condition which could see dependencies like clutter-box2d failing to
compile due to missing pkgconfig dependencies.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the RDEPENDS for nativesdk because the nativesdk-automake also
needs perl modules.
Add dependencies perl-module-thread-queue and perl-module-threads.
Remove redundant dependencies that they are already required by autoconf
and autoconf is required by automake.
In this removed list, "-->" present "required by":
perl-module-cwd --> perl-module-file-path --> autoconf
perl-module-dynaloader --> perl-module-xsloader --> perl-module-fcntl
--> perl-module-file-stat --> autoconf
perl-module-exporter-heavy --> perl-module-exporter --> autoconf
perl-module-constant --> autoconf
perl-module-errno --> autoconf
perl-module-file-basename --> autoconf
perl-module-file-compare --> autoconf
perl-module-file-copy --> autoconf
perl-module-file-glob --> autoconf
perl-module-file-spec-unix --> perl-module-file-spec
--> perl-module-io-file --> autoconf
perl-module-file-stat --> autoconf
perl-module-getopt-long --> autoconf
perl-module-io --> perl-module-IO-handle --> perl-module-IO-seekable
--> perl-module-io-file --> autoconf
perl-module-io-file --> autoconf
perl-module-posix --> autoconf
Bump up PR.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update autoconf runtime dependencies on perl and perl modules. And
remove RDEPENDS for nativesdk because the nativesdk-autoconf has same
dependencies with autoconf.
Then fixes autoreconf runs failed both on target and toolchain.
Bump up PR.
[Yocto 3100]
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Run autoreconf fails because it uses several perl modules and they
requires other perl modules. So update these dependencies for:
perl-module-exporter
perl-module-file-glob
perl-module-file-path
perl-module-file-spec
perl-module-file-stat
perl-module-io-file
perl-module-io-handle
perl-module-io-seekable
perl-module-posix
And RDEPENDS rules in file perl-rdepends_5.14.2.inc don't work for
nativesdk perl module packages. Replace all "perl" with "${PN}" in the
file to fix that.
In nativesdk.bbclass it calls
oe.classextend.NativesdkClassExtender().map_packagevars() to map package
vars include var RDEPENDS. In map_packagevars():
for pkg in (self.d.getVar("PACKAGES", True).split() + [""]):
the value of var "PACKAGES" may not be calculated correctly, so for
all the nativesdk packages created by
PACKAGES_DYNAMIC_virtclass-nativesdk += "^nativesdk-perl-module-.*"
dependencies are wrong.
This is similar with 51cbb5ae76a22d465e2f6c5ef923ec2682624e3b.
Bump up PR.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
nothing else needs sato-icon-theme.inc
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
| Can't locate XML/Simple.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at /home/andreas/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/lib/icon-naming-utils/icon-name-mapping line 12.
| BEGIN failed--compilation aborted at /home/andreas/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/lib/icon-naming-utils/icon-name-mapping line 12.
| make[3]: *** [install-data-local] Error 2
| make[3]: Leaving directory `/home/andreas/tmp/oe-core-eglibc/work/all-angstrom-linux/sato-icon-theme-0.4.1-r5/sato-icon-theme-0.4.1/16x16/actions'
| make[2]: *** [install-am] Error 2
| make[2]: Leaving directory `/home/andreas/tmp/oe-core-eglibc/work/all-angstrom-linux/sato-icon-theme-0.4.1-r5/sato-icon-theme-0.4.1/16x16/actions'
| make[1]: *** [install-recursive] Error 1
| make[1]: Leaving directory `/home/andreas/tmp/oe-core-eglibc/work/all-angstrom-linux/sato-icon-theme-0.4.1-r5/sato-icon-theme-0.4.1/16x16'
| make: *** [install-recursive] Error 1
| ERROR: oe_runmake failed
| ERROR: Function failed: do_install (see /home/andreas/tmp/oe-core-eglibc/work/all-angstrom-linux/sato-icon-theme-0.4.1-r5/temp/log.do_install.21502 for further information)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
configure: WARNING: unrecognized options: --disable-silent-rules, --with-libtool-sysroot, --disable-hicolor-check
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Chen Qi
Robert Yang
Jack Mitchell
Daniel Stone
Richard Purdie
Phil Blundell
Andy Ross
Tom Zanussi
Khem Raj
Mihai Lindner
Fabien Proriol
Saul Wold
Ross Burton
Peter Seebach
Mark Hatle
Paul Eggleton
Alexandru DAMIAN
Kang Kai
Andreas Müller