| Age | Commit message (Collapse) | Author |
|---|
|
aarch64 sets OLDEST_KERNEL to 3.14. This stops the aarch64 SDK installing on
anything with an older kernel which is clearly incorrect.
I attempted to extract the correct non-overridden version from the data store
but it proved problematic and I was running into data store issues. Those
are a separate problem but there isn't time to fix this right now.
Instead just code the SDK kernel version separately to work around this for
now (and fix the autobuilder tests and SDK usage).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently if the SDK fails to extract, no error is shown and the test is marked
as passed! Clearly this is incorrect, fix it to correctly raise an error.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 56c5fa106eeccda2ca92dbeb73ff01ba40992e7d.
(This fix was incorrect and there is a better fix due to be merged)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
U-Boot will compile its own tools during the build, with specific
configurations (aka when CONFIG_FIT_SIGNATURE is enabled) the host tools
require openssl. This patch adds 'openssl' as a PACKAGECONFIG that
enables the use of openssl-native as a dependency and also adds the
HOSTCC flags that U-Boot uses when compiling the host tools.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is just rudimentary support at the moment as we'd potentially want
to compare the control files a bit more specifically than this does, but
it's a start.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is useful in a few different contexts to see which files have been
written out by an sstate task; break out a function that lets us get the
path to the manifest file easily.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add support for U-Boot recipes to install and deploy the generated ELF
files for each config. The U-Boot ELF's are useful for debugging, and
booting (directly booting, e.g. by JTAG or using QEMU) and complement
the generated binary image.
This additional feature is disabled by default, machines/etc that want
to use it need to set UBOOT_ELF to the corresponding ELF file (generally
u-boot or u-boot.elf depending on the architecture)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Bugfixes.
build-create-dirs-before-putting-files-in-them.patch
patch removed, patch included upstream.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When the init_fatal_sh boot parameter is present (i.e. used without
value) and a fatal problem occurs inside the initramfs-module, a shell
will be started instead of looping forever.
Useful for debugging.
Interestingly enough, the code was already indented to support such an
if check...
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It can be useful for debugging to override the default /sbin/init.
This is something typically done via the init boot parameter which
then gets interpreted by the kernel. But when using an initramfs, it
is the initramfs which must react to the option.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Default is to mount the rootfs read/write. "ro" can be used to turn
that into read-only, which is useful on systems where userspace does
an fsck before remounting read-write.
Giving both "ro" and "rw" will still mount read-only regardless of the
order, because the ordering information is not preserved by the
initramfs-framework's boot param support.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These two parameters are supported by the kernel
(https://www.kernel.org/doc/Documentation/kernel-parameters.txt). When
an initramfs is used, the kernel does not mount the rootfs and the
initramfs needs to react to them.
The boot parameters can be set both by the image creator and
by users.
Supporting these two parameters is useful:
- rootflags is needed to ensure that the rootfs is already mounted as
intended in the time between starting init and init remounting
it (as systemd does); this is critical for IMA where iversion must be
active already when system starts writing files.
- setting it correctly up-front avoids messages from the kernel ("cannot
mount ... as ext2 because ...") when trying to guess the desired type.
For example, assuming that only one of ext4/ext3/ext2 is set,
rootfstype could be set in an image recipe with:
APPEND_append = "${@''.join([' rootfstype=' + i for i in ['ext4', 'ext3', 'ext2'] if i in d.getVar('IMAGE_FSTYPES', True).split()])}"
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These are not portable features and are flagged by clang
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
clang points to coding errors which otherwise go unnoticed
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
gcc does not have it but clang does, problem happens when host compiler
is gcc and cross compiler is clang, because autoconf detects it with
clang and slaps it to host compiler as well
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Clang uncovered an error where abs() is used on long types, we shoud be
using labs()
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
-r is understood by gcc but not by clang, anyway its a linker option so
pass it straight to linker by using -Wl explicitly
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed a linking error occurring when building with clang, where a
function reference is emitted but function is not since its marked as
inline, making it static inline gives better opportunity to compiler to
compile it
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Clang is stricter with syntax checking and flags the functions return
values if they dont match with function signatures, Fixed thusly
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is no longer required, its been carried over for a long time. As a
side effect it helps compiling ccache with clang
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
All cases are about glibc and for non-glibc systems it falls back to
last else choice which still is glibc's older version, ideally it
should have a case where libc != glibc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
musl exposes the inherent assumption about certain header files from
glibc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We needed this define but were getting away since glibc indirectly
included fcntl.h but man sources clearly guard inclusion of fcntl.h with
SYSV, this is uncovered with musl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is exposed by musl, on glibc sys/types.h comes as indirect include
from other include myriad.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes errors like
|
/home/ubuntu/work/oe/openembedded-core/build/tmp-musl/work/core2-64-oe-linux-musl/slang/2.2.4-r12/slang-2.2.4/src/slpo
sio.c:366:12: error: conflicting types for 'posix_close'
| static int posix_close (SLFile_FD_Type *f)
| ^
| In file included from
/home/ubuntu/work/oe/openembedded-core/build/tmp-musl/work/core2-64-oe-linux-musl/slang/2.2.4-r1
2/slang-2.2.4/src/slinclud.h:20:0,
| from
/home/ubuntu/work/oe/openembedded-core/build/tmp-musl/work/core2-64-oe-linux-musl/slang/2.2.4-r1
2/slang-2.2.4/src/slposio.c:24:
|
/home/ubuntu/work/oe/openembedded-core/build/tmp-musl/sysroots/qemux86-64/usr/include/unistd.h:38:5:
note: previous de
claration of 'posix_close' was here
| int posix_close(int, int);
| ^
| make[1]: ***
[/home/ubuntu/work/oe/openembedded-core/build/tmp-musl/work/core2-64-oe-linux-musl/slang/2.2.4-r12/slang-
2.2.4/src/elfobjs/slposio.o] Error 1
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This will help one to disable the targets via bbappends if needed
e.g. musl can not compile irdaping since it uses includes
net/if_packet.h, which (on GLIBC) only defines struct sockaddr_pkt but
not in other libc e.g. musl that makes irdaping specific to glibc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
bjam is stripped by default, this causes QA warning while stripping it
from do_populate_sysroot():
WARNING: File '.../tmp/sysroots/x86_64-linux/usr/bin/bjam' \
from bjam-native was already stripped, \
this will prevent future debugging!
The JAM scripts allow to build unstripped version with '--debug'. Just
build and install the bjam.debug to stop bjam from being stripped in
compile step.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It couldn't be applied by sled11's patch, now fix it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix the building path is long, when building bind, we would meet the following
error.
".../long/path/to/bind/9.10.2-P3-r0/bind-9.10.2-P3/lib/dns" too long
This is because the in gen.c, DIRNAMESIZE is limited to 256. But in OE, the
path length limit is more than 400. So we change it to 512.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Only fetch remote signatures if verification has been enabled, as otherwise the
fetcher throws errors that sstate.bbclass can't ignore.
[ YOCTO #8265 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This reverts commit 8ca8e2e5bf4a9f01dc48300149a8e1d71d715400.
Further testing showed the kernel does not support root=UUID; it is
something typically handled by the initramfs.
Because boot-directdisk.bbclass cannot know whether it is using a
suitable initramfs, root=UUID cannot be the default. Instead, it will
have to be set in image recipes on a case-by-case basis.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As most upstreams don't have installable test suites it's fairly common to copy
files directly out of a source tree for ptests, but this results in files in the
recipe being owned by the user running bitbake:
WARNING: QA Issue: .../sed/4.2.2-r0/packages-split/sed-ptest/usr/lib64/
sed/ptest/testsuite/bug-regex21 is owned by uid 1000, which is the same
as the user running bitbake. This may be due to host contamination
[host-user-contaminated]
Instead of needing to fix this in every recipe that has this problem simply
chown the files to root:root in do_install_ptest_base.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is not used by anything in oe-core and will be moved to meta-gnome
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently, if qemu segfaults, the tests merrily continue trying to execute
which takes time for them to timeout and is a bit silly. Worse, no logs about
the segfault are shown to the user, its silent!
This patch tries to unravel the tangled web of issues and ensures that we:
* install a SIGCHLD handler which tells the user qemu exited
* check if qemu is running, if it isn't fail the test outright
* don't leave processes behind in sshcontrol which would hold
bitbake.lock and block shutdown
(From OE-Core rev: 77e9363feba53b72429154be5713c46b007ae0a4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1. $(grep xxx xxx) never returns 0, it maybe return empty or string, and
can not compare with 0, this fixes that python module never are installed.
2. python library is installed into /usr/lib/ by default, but we expect
it is installed into ${libdir}, so add --install-lib parameter for python
setup.py to set the library dir;
this fixes not shipped warning, since python modules are installed into
/usr/lib/, but FILE_${PN}-python expects it is under ${libdir}, which is
/usr/lib64/ for 64bit machine
3. the makefile target install-python_ext is moved from Makefile to
Makefile.perf from linux v3.13, so match install-python_ext in Makefile.*
and --root='/\$(DESTDIR_SQ)' before linux v3.13 will install the target
python library to native sysroot, so replace it with --prefix as after linux
3.13;
this fixes not shipped warning, and install target files to native dir, like
below:
ERROR: QA Issue: perf: Files/directories were installed but not shipped in any package:
/home
/home/pokybuild
/home/pokybuild/yocto-autobuilder
/home/pokybuild/yocto-autobuilder/yocto-worker
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr/lib
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr/lib/python2.7
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr/lib/python2.7/site-packages
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr/lib/python2.7/site-packages/perf.so
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-fsl-ppc-lsb/build/build/tmp/sysroots/x86_64-linux/usr/lib/python2.7/site-packages/perf-0.1-py2.7.egg-info
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
provide the nfs-client IMAGE_FEATURES, to ease a user to only
install nfs client related files to image
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
prepare/prepare_list vfuncs
In function gst_base_sink_chain_unlocked(), it should calculate jitter based
on current media clock, rather than just passing 0.
Or it will drop all the frames when rewind in slow speed, such as -2X.
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
reach EOS
EOS event hasn't been sent to down-element. The resolution is block EOS event
of inactive pad, sending the event after the pad actived.
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We really do not want our (external) source tree to be removed. There
might be multiple values in the 'cleandirs' varflag pointing to our
source tree - causing it to be wiped out. This patch improves the
filtering of 'cleandirs' by examining the expanded values inside it. Any
(expanded) values pointing to our source tree get removed.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch fixes the following error:
.../lib/arm/setjmp.S:18: Error: unrecognized symbol type ""
.../lib/arm/setjmp.S:26: Error: unrecognized symbol type ""
The problem is the assembly syntax that is used is not portable to ARM,
where the '@' symbol is a comment:
> Note on targets where the @ character is the start of a comment
> (eg ARM) then another character is used instead. For example the
> ARM port uses the % character.
(From https://sourceware.org/binutils/docs-2.25/as/Section.html#Section)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gsettings-desktop-schemas is a dependency of epiphany
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
gnome-desktop3 is a dependency of epiphany
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
libwnck is a dependency of epiphany
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
gcr is a dependency of epiphany
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
p11-kit is a dependency of gcr (which is a dependency of epiphany)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
libwebp is a dependency of webkit.
Upgrade to 0.4.3, add COPYING to license checksum, and use the newly added
options in PACKAGECONFIG.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
libsecret is a dependency of webkit
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Ruby is required to build webkit.
Use trim_version() to build the major release, and remove redundant S assignment
(RB).
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
libyaml is a dependency of ruby
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
Richard Purdie
Ross Burton
Nathan Rossi
Paul Eggleton
Cristian Iorga
Patrick Ohly
Khem Raj
Wenzong Fan
Robert Yang
Chen Qi
Alexander Kanavin
Roy Li
Yuqing Zhu
Markus Lehtonen