aboutsummaryrefslogtreecommitdiffstats
path: root/meta
AgeCommit message (Collapse)Author
2016-09-13gstreamer1.0-omx: inherit upstream-version-is-evenMaxin B. John
Since gstreamer1.0-omx follows the GStreamer versioning style, inherit upstream-version-is-even for checking the upstream version of the package. Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13bitbake.conf: Add BBSERVER to HASHBASE_WHITELISTEd Bartosh
Using BBSERVER variable in checksum calculations causes unnecessary rebuilds when running memres bitbake. Whitelisted BBSERVER variable to prevent this unwanted behaviour. [YOCTO #10201] Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13oeqa: Remove linux user utilized for rpm test.Edwin Plauchu
When trying to re-test smart rpm tests. A fail arises due to a linux user previously created upon the image. We've added a few lines to delete such user and his home dir when finishing test. [YOCTO #9204] Signed-off-by: Edwin Plauchu <edwin.plauchu.camacho@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13oeqa.buildperf: another fix for splitting 'nevr' stringMarkus Lehtonen
When processing buildstats we determine recipe name, epoch, version and revision from the per-recipe buildstat directory name. One previous patch made an assumption that package version starts with a number. That might not be true because of a packaging mistake or whatever reason. Thus, if a version starting with a number is not found, fall back to the "old" method of just taking the second-last dash-delimited part (the one before revision). Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13libical: fix build failure after changing machineMaxin B. John
libical build QA fails when libical is built for e.g. qemux86-64 already, and is then built for generic86-64 in a way that install is re-run: $ MACHINE=qemux86-64 bitbake libical $ MACHINE=genericx86-64 bitbake -f -Cinstall libical ERROR: libical-2.0.0-r0 do_populate_sysroot: QA Issue: libical.pc failed sanity test (tmpdir) in path [YOCTO #10223] Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13tiff: Update download URLJussi Kukkonen
remotesensing.org domain has been taken over by someone unrelated. There does not seem to be an up-to-date tiff homepage, but osgeo.org is a reliable download site. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13rpm: remove redundant removalsRoss Burton
These were noticed by the use of bashisms (rm *.{foo,bar}) and lots of these rm commands are deleting files which don't exist in the first place. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13glibc: remove hard-coded reference to gcc -EJérémy Rosen
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13libpcre: explicitely specify CCLD_FOR_BUILD for this recipeJérémy Rosen
libpcre uses CCLD_FOR_BUILD as the name of the host command to use for linking. This is not a standard autotools symbol but particular to this recipe. We need to set it explicitely Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13rpm: manually cleanup sysckJérémy Rosen
version 5.4.1 of rpm was not properly distclean before release, which causes problems when cross-compiling. The previous version this recipe called make distclean, but that would trigger a call to ./configure which would fail when no gcc is available and make the whole do_configure fail further down the line This patch manually removes the files from the recipe. Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13sanity: fix hardcoded references to gccJérémy Rosen
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13busybox: allow overriding compiler name in KConfigJérémy Rosen
The KConfig infrastructure needs to build HOST binaries in order to provide its infratstructure. Yocto needs to force the HOSTCC and HOSTCPP variables to BUILD_CC and BUILD_CPP to make sure that the proper compiler is used when compiling host binaries Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13linux-libc-headers: allow overriding compiler name in KConfigJérémy Rosen
The KConfig infrastructure needs to build HOST binaries in order to provide its infratstructure. Yocto needs to force the HOSTCC and HOSTCPP variables to BUILD_CC and BUILD_CPP to make sure that the proper compiler is used when compiling host binaries Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13linux-yocto: allow overriding compiler name in KConfigJérémy Rosen
The KConfig infrastructure needs to build HOST binaries in order to provide its infratstructure. Yocto needs to force the HOSTCC and HOSTCPP variables to BUILD_CC and BUILD_CPP to make sure that the proper compiler is used when compiling host binaries Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13cross: export CC family from BUILD_* for cross compilersJérémy Rosen
cross-compilers are native recipes that need to be compiled by the host's compiler. However they do not use native.bbclass As a consequence, the various CC, CXX etc environment variables are not correctly set and they will not honor the host compiler name provided by the BUILD_* variables. Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13gstreamer1.0-plugins-good: enable v4l2-probeNicolas Dechesne
A new mechanism to probe v4l2 M2M devices was implemented in gst 1.8 series, in order to get such devices probed we now need to enable v4l2-probe compile option which upstream decided to keep disabled by default (unfortunately), see [1]. With this feature disabled, it is not possible to get v4l2 M2M device to work in Gstreamer which is a common use case on many embedded platforms. This patch enables this new option as soon as v4l2 support is enabled in gstreamer -good. [1] https://bugzilla.gnome.org/show_bug.cgi?id=758085 Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13u-boot: Set u-boot binary permissions to 0644Marek Vasut
The U-Boot binary is not an executable, it is a binary file, set it's permissions to 0644 instead of 0755. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-13useradd: do not delete users and groups during configureJoe Slater
If two recipes both create the same users and groups, the second recipe can delete items created by the first causing things like "chown" to fail for the first recipe. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-09oeqa/parselogs: Don't use cwd for file transfersRichard Purdie
If you run: MACHINE=A bitbake <image> -c testimage MACHINE=B bitbake <image> -c testimage and A has errors in parselogs, machine B can pick these up and cause immense confusion. This is because the test transfers the log files to cwd which is usually TOPDIR. This is clearly bad and this patch uses a subdir of WORKDIR to ensure machines don't contaminate each other. Also ensure any previous logs are cleaned up from any existing transfer directory. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09oeqa.runtime.smart: work around smart race issuesMarkus Lehtonen
Yucku hack around test failures which ultimately are caused by a race in smartpm itself. Issuing smartpm commands in quick succession causes races in package cache of smartpm on some systems. This patch mitigates the problem by sleeping for 1 second after each smartpm command that modifies the system. [YOCTO #10244] Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09oeqa/runtime/smart: Prune feeds to save memoryRichard Purdie
Full package feed indexes overload a 256MB image so reduce the number of rpms the feed. Filter to p* since we use the psplash packages and this leaves some allarch and machine arch packages too. [YOCTO #8771] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09gtk-doc: only depend on native gtk-doc for documentation generationRoss Burton
Now that gtk-doc-native works correctly, the gtk-doc class doesn't need to depend on target gtk-doc. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09gtk-doc: use pkg-config-native in native gtk-doc.m4Ross Burton
When building gtk-doc-native the m4 functions for autoconf should use pkg-config-native instead of pkg-config so that they can find the native tooling. This means that it is possible to generate gtk-doc without building the target packages. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09gstreamer: remove packaged copy of gtk-doc.m4Ross Burton
The gstreamer common module ships a copy of gtk-doc.m4 that will be used in preference to our patched form, so delete it before configure is executed. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-09gobject-introspection: set GI_SCANNER_DISABLE_CACHE for nativeRobert Yang
The native recipe should not write files to $HOME/.cache as target, this can avoid problems when multi builds are running on the same host like: | File "./g-ir-scanner", line 66, in <module> | sys.exit(scanner_main(sys.argv)) | File "../gobject-introspection-1.48.0/giscanner/scannermain.py", line 543, in scanner_main | transformer = create_transformer(namespace, options) | File "../gobject-introspection-1.48.0/giscanner/scannermain.py", line 389, in create_transformer | symbol_filter_cmd=options.symbol_filter_cmd) | File "../gobject-introspection-1.48.0/giscanner/transformer.py", line 54, in __init__ | self._cachestore = CacheStore() | File "../gobject-introspection-1.48.0/giscanner/cachestore.py", line 61, in __init__ | self._check_cache_version() | File "../gobject-introspection-1.48.0/giscanner/cachestore.py", line 89, in _check_cache_version | self._clean() | File "../gobject-introspection-1.48.0/giscanner/cachestore.py", line 141, in _clean | self._remove_filename(os.path.join(self._directory, filename)) | File "../gobject-introspection-1.48.0/giscanner/cachestore.py", line 123, in _remove_filename | os.unlink(filename) | FileNotFoundError: [Errno 2] No such file or directory: '/home/pokybuild/.cache/g-ir-scanner/0a47aa95823c95a0b5d1bd610b60d02f35785f26' | Makefile:3518: recipe for target 'GModule-2.0.gir' failed Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09distro-alias.inc: rename gtk-doc-stub to gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09clutter-1.0: do not use the prepackaged clutter.types file when generating ↵Alexander Kanavin
gtk-doc Doing so will fail when x11 is disabled in particular. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09pango: fix gtk-doc build when x11 is not in useAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09util-linux: do not enable gtk-doc and explain whyAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09p11-kit: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09libsoup-2.4: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09libtasn1: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09gnutls: enable gtk-docAlexander Kanavin
gtk-doc also requires --enable-doc, so that is no longer configurable. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09harfbuzz: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09cairo: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09libenck3: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09libgudev: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09json-glib: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09gnome-desktop3: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09gdk-pixbuf: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09libuser: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09libidn: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09orc: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09dbus-glib: enable gtk-docAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09webkitgtk: re-enable introspection on powerpcAlexander Kanavin
It seems to work under qemu-ppc now. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09gcr, libsecret, webkitgtk: disable gtk-doc on mips64Alexander Kanavin
It fails with the same error as gobject-introspection Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09gcr: disable gtk-doc on x86_64Alexander Kanavin
For same reason that introspection is disabled: the transient binary goes into infinite loop. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09gtk+3: disable gtk-doc when x11 is not availableAlexander Kanavin
gtk-doc requires gdk/x11/gdkx.h which is not available if gdk x11 backend is disabled (due to jku's patch). Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09webkitgtk: enable gtk-doc supportAlexander Kanavin
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
2016-09-09gstreamer1.0: enable gtk-doc supportAlexander Kanavin
check support is no longer disabled by default because it is a requirement of gtk-doc support in gstreamer. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-24 05:28:18 +0000