| Age | Commit message (Collapse) | Author |
|---|
|
Add a new SDK testcase that builds assimp, a project that uses cmake.
Using TARGET_ARCH and TARGET_OS which is now exported into the environment,
check that the generated binaries match the ELF headers we expect.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's useful for the SDK to know exactly what TARGET_ARCH and TARGET_OS are,
specifically for SDK QA.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CMake, in it's infinite wisdom, when searching for libraries (using
find_library) will look inside the libraries PREFIX/lib, PREFIX/lib32, and
PREFIX/lib64. In a multilib SDK more than one of these will exist (potentially
all three) and obviously for a given build configuration only one of those is
valid. This search path is hard-coded deep inside CMake but by setting
CMAKE_FIND_LIBRARY_CUSTOM_LIB_SUFFIX we can bypass it and set an explicit
lib<SUFFIX> to use.
Do this by writing ${baselib} into the environment file, and then stripping
"lib" from this to obtain the suffix in the cmake-specific environment script,
which is then read in the CMake toolchain.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following error appeared at boot.
systemd-tmpfiles[115]: [/usr/lib/tmpfiles.d/man-db.conf:1] Unknown user '1w'
By default cache owner is enabled and defaults to 'man'. Users could
supply '--enable-cache-owner=[ARG]' to change the default cache owner.
Using '--disable-cache-owner' leaves the ownership of system-wide
cache files unconstrained, and users will allowed to modify them.
We'd better keep the default behavior, just like other distros do.
I can guess that we used '--disable-cache-owner' to bypass the following
error at do_install.
| chown: invalid user: ‘man:man’
The 'man' user is provided by base-passwd recipe, so add it to DEPENDS.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemumips,qemumips64 and x86 based machines include kernel-modules by
default. Remove the kernel modules from RRECOMMENDS to make it consistent
across the machines.
Tested using core-image-sato on qemumips, qemumips64, qemux86 and
qemux86-64
[YOCTO #12383]
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
u-boot attempts to build a Python library called pylibfdt. By default,
u-boot would attempt to use the build host's Python interpreter, which
causes numerous problems, not least of which is that it fails if the
host doesn't have the Python development package installed (complaining
about not being able to find Python.h)
Rectify this situation by including the proper build time dependencies
for pylibfdt and passing the proper arguments to make.
[YOCTO #12867]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of both classes using ${PYTHON_PN} (which is set by python-dir and
python3-dir), hardcode the right values so that it is possible to inherit both
pythonnative and python3native at the same time.
If both are inherited then both native Pythons are available, but the last to be
inherited will be the one to set PYTHON.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the configure fails then we don't really want to see hundreds of lines of
test output (this would be similar to dumping out autoconf's config.log). The
error includes the path of the full log if further debugging is required.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Openssl 1.1 requires perl in order to build (just as openssl 1.0
does). The missing dependency has gone unnoticed up to now since
hostperl-runtime-native is included in ASSUME_PROVIDED.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rebased ptest.patch.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The license file changes from README to README.rst, and the lines which
contains license info is from 1 to 20. The license is still Apache-2.0.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The pam_wheel PAM module is used to enforce the so-called wheel group.
By default it permits root access to the system if the applicant user is
a member of the wheel group.
Add PACKAGECONFIG to enable pam_wheel module for sudo.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
for core-image-minimal image, missing these two dependency
will cause below warning and error:
warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
./test/icu_parse_test.xml generated an error
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fallocate was disabled for native/nativesdk in:
http://git.openembedded.org/openembedded-core/commit/?id=17f3c548caf4adec37c3bbb139aa6b3900419794
We have since added uninative support and better glibc handling for SDKs
so this difference can be dropped now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove upstreamed patches:
1. 0001-Fix-build-on-x86.patch
2. 0001-Support-installing-demos-support-out-of-tree-builds.patch
Updated the following patch:
1. 0001-Don-t-build-demos-with-questionably-licensed-data.patch
Update subcomponents gli and glm based on the new structure of
repository.
License-Update: Update in location of file. No change in checksum
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Refresh the patch:
demos-Don-t-build-tri-or-cube.patch
License-Update: Updates in copyright information.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Because the util-linux_2.32.bb recipe explicitely disables fallocate
for nativesdk triggering build warnings:
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux:
alternative target (sdk/usr/bin/fallocate or sdk/usr/bin/fallocate.util-linux)
does not exist, skipping...
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux: NOT adding
alternative provide sdk/usr/bin/fallocate: sdk/usr/bin/fallocate.util-linux
does not exist
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux: alt_link ==
alt_target: sdk/usr/bin/fallocate == sdk/usr/bin/fallocate
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch enables multiconfig dependencies (mcdepends) to be used on
recipes using the following format:
task[mcdepends] = "multiconfig:FROM-MC:TO-MC:PN:task-to-depend-on"
For the sake of simplicity consider the following example:
Assuming we have set up multiconfig builds, one for qemux86 and one for
qemuarm, named x86 and arm respectively.
Adding the following line to an image recipe (core-image-sato):
do_image[mcdepends] = "multiconfig:x86:arm:core-image-minimal:do_rootfs"
Would state that core-image-sato:do_image from x86 will depend on
core-image-minimal:do_rootfs from arm so it can be executed.
This patch makes modifications to bitbake.conf to enable mcdepends, and
to sstatesig and staging.bbclass to avoid conflicts between packages from
different multiconfigs.
[YOCTO #10681]
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
C++ applications that contain a specfic use of std::pair with tempates
cause the build to require many gigabytes of RAM to build.
This is a fix that was applied to the upstream GCC 7 branch.
Change-Id: I213f96d1d6332e2dce5765482ff3413f1abd7ff8
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When building on ppc64le hosts that have GCC 8 (such as Ubuntu 18.10)
the GCC build bootstrap fails.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86162
This is a fix that was applied to the upstream GCC 7 branch.
Change-Id: I7796d2a999ec420805dd1c6cf0a1ecba1de5a897
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Some of the devtool tests make changes to files under meta/ -
legitimately since we want these tests to be working with real recipes
and associated files. Unfortunately with the new oe-selftest
parallelisation this can break other tests if files go missing at the
wrong time (among other scenarios). To avoid this issue, simply take a
copy of the core repository and use that for these tests. (We copy the
entire repository since changing the path of meta/ influences COREBASE
and thus we need to have things like scripts/ alongside as well).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Make the tests subpackage depend on all modules as test.regrtest uses most (if
not all) of them.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If kdump.service is set to run on boot and dump-capture kernel isn't
placed in /dev/root, kdump.service will fail to load the kernel,
since other partitions are not mounted yet. Starting kdump.service
after basic.target guarantees dump-capture kernel can be loaded in
this situation.
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use SYSTEMD_BUS_TIMEOUT to set default timeout to 240s to avoid
timeout problem on slow qemu machines.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
|
|
Backport 0001-sd-bus-make-BUS_DEFAULT_TIMEOUT-configurable.patch
which allows setting dbus calls timeout via SYSTEMD_BUS_TIMEOUT
environment variable.
This is needed as we are meeting timeout failures from the oeqa
runtime test case systemd.py.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
|
|
The following error from systemd-udevd is not harmful. It's just
because our qemu targets are using eth0.
Error changing net interface name 'eth0' to 'enp0s3': Device or resource busy
Note that systemd is using a different network interface naming scheme
from traditional ethX naming scheme. To make this error message go away,
we could symlink /etc/udev/rules.d/80-net-setup-link.rules to /dev/null
to recover traditional naming scheme. But I'm not sure if this will
cause regression in user experience for systemd users of OE.
So just ignore this error message so that parselogs.py test case does not
fail.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
|
|
1. For test_syslog_running, we should not restrict it to run for
only busybox-syslog and sysklogd. So extend it to all syslog
providers in oe-core and meta-openembedded.
2. For test_syslog_startup_config, fix to make it depend on the
existence of busybox-syslog. The previous condition "!sysklogd
&& busybox" is incorrect, because busybox may be compiled without
syslog support, and sysklogd and busybox-syslog conflict with
each other.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
|
|
We keep breaking the preservation of hardlinks during the packaging process.
Add a selftest which tests this to try and prevent this breaking again.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recent changes broke the preservation of hardlinks during processing due to a missing index.
Fix this, reducing the size of the git recipe packages in particular (it contains many hardlinks).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add mtd-utils upstream patch that fixes a regression on the
mtd-utils tools such as ubinfo.
Details of the issue which affects mtd-utils 2.0.1 and 2.0.2:
http://lists.infradead.org/pipermail/linux-mtd/2018-June/081562.html
Upstream-Status: Accepted [http://git.infradead.org/mtd-utils.git/commit/0f833ac73ad631248826386e2918d8571ecf0347]
Signed-off-by: Adriana Kobylak <anoo@linux.ibm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this patch /usr/bin/libtoolize is different for each multilib
since their host-triplets are different, despite there being no difference in
the functionality of libtoolize itself.
This change just patches out the problematic line since its just a comment for the user
in help text. Ugly but solves the problem. This fixes issues where libtool and
libXX-libtool couldn't be installed into the same system.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Whilst the package managers handle multilib ELF binaries well, they don't
handle scripts in the *bindir directories well. This adds support for
marking these up so that they can be handled using update-alternatives.
Its done this way so that non-multilib systems don't see any changes and
there is standardisation amongst the multilibs on how the alternatives are
named and prioritiesd. The priotitisation code needs to be added but this
change means there is somewhere to add it.
Recipe needs to set MULTILIB_SCRIPTS in the form <pkgname>:<scriptname>, e.g.
MULTILIB_SCRIPTS = "${PN}-dev:${bindir}/file1 ${PN}:${base_bindir}/file2"
to indicate which script files to process from which packages.
libtool is used a as a reference to stop the libtool scripts conflicting
in a multilib case and allows the kernel-devsrc change to be merged.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Squash whitespace in CC_INFO to avoid recipe whitespace changes to
CFLAG affecting the final openssl binaries (the value of CC_INFO gets
embedded in libcrypto, via buildinf.h).
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Creating the openssl manpages, which happens as part of do_install(),
can take a significant amount of time (e.g. ~50 seconds on a quad
core laptop). Provide a PACKAGECONFIG option to allow creation of the
manpages to be skipped completely if not required and inherit the
manpages class to automatically control the PACKAGECONFIG option
(based on the "api-documentation" distro feature).
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The fact that the darwin support only appears to consider x86 (and
not x86_64) suggests that it's not maintained or tested. In general
oe-core doesn't support building on darwin.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously (when EXTRA_OEMAKE contained -e) exporting these variables
over-rode default values in the top-level openssl Makefile. However,
since -e was removed from EXTRA_OEMAKE as part of:
http://git.openembedded.org/openembedded-core/commit/?id=537a404cfbb811fcb526cdb5f2e059257de6ef13
exporting these variables does nothing. The comment from that commit
that only AR is affected by removing -e wasn't correct, but the
effects of letting the openssl Makefile also control AS, EX_LIBS and
DIRS seem to be either benign or beneficial.
Since without -e make ignores DIRS from the environment and always
runs for all subdirs (including "test"), adding "test" to DIRS and
calling "make depend" again from do_compile_ptest() can be dropped.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch adds a second line to the -help output of the CA.pl script
(which lists almost the same command line options as the line above
it but in a slightly different order). Although it's tagged as a
Debian backport, there's no patch like it in recent Debian patch sets
for openssl 1.0.2.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
rm_work if enabled leads to some tests failing that rely on artifacts
being present. Check if rm_work.bbclass is included and show an error
and exit if it is.
Fixes [YOCTO #12694]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes
ERROR: glibc-locale-2.27-r0 do_package_qa: QA Issue: glibc-locale: /glibc-binary-localedata-hy-am/usr/lib/locale/hy_AM/LC_MEASUREMENT.tmp is owned by uid 3004, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
By splitting the iptables modules into separate packages it is
possible to pick and choose the modules to install and thereby reduce
the total size of the installed modules.
Backwards compatibility is maintained by adding a recommendation of
iptables-modules, which is a meta package that depends on all the
generated packages.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since the following patch applied in upstream webkitgtk
...
commit 1a55d8c685b3e5b4dbeda202009e7527aa59eadd
Author: simon.fraser@apple.com <simon.fraser@apple.com@268f45cc-cd09-0410-ab3c-d52691b4dbfc>
Date: Thu Nov 23 22:20:09 2017 +0000
FELighting cleanup and optimization
https://bugs.webkit.org/show_bug.cgi?id=179933
...
It missed to tweak `paintingData.lightVector' which caused
PaintingData' has no member named 'lightVector' on ARM_NEON
(beaglebone)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For distutils3, any setup.py invoking will cause setup_requires
argument to trigger a code fetching. Since the following commit
applied in oe-core, code fetching occurs during do_confugire
before the do_compile.
...
b805cef distutils: clean the build tree in do_configure
...
Refer what do_compile did, add var-NO_FETCH_BUILD to do_configure.
Sync with distutils3, add do_configure to distutils also.
[YOCTO #12084]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
- Pass mips32's CFLAGS to tests
- Fix broken inline asm in tests on mips32-linux
- Build mips n32 successfully, support it.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
They are required by oeqa.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
- It is required by oeqa, add it so that we can add nativesdk-python3-subunit
to buildtools-tarball.
- The original one is python-subunit_1.1.0.bb which is from meta-openstack
layer, I divided it into python-subunit.inc and python3-subunit_1.1.0.bb
and extended to nativesdk.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Ross Burton
Chen Qi
Mingli Yu
Maxin B. John
Joshua Watt
Andre McCurdy
Robert Yang
Yi Zhao
Changqing Li
Richard Purdie
Ioan-Adrian Ratiu
Alejandro Enedino Hernandez Samaniego
Joel Stanley
Paul Eggleton
Markus Lehtonen
Yongxin Liu
Adriana Kobylak
Anuj Mittal
Khem Raj
Peter Kjellerstedt
Hongxu Jia