Age | Commit message (Collapse) | Author |
|
Whether the AFALG engine (use of hardware crypto via AF_ALG) is enable or
disable depends on whether the host kernel is 4.1 or above, which has no bearing
on whether the target system supports it.
Remove the complicated logic and simply enable/disable as requested.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To aid debugging configure, dump the configdata in do_configure.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
TCBLIC can be set to 'newlib' now, document this.
[YOCTO #13032]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Remove 5 backported patches
* Refresh patches to remove fuzz warnings
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default GCC for ARC is configured with ARC700 CPU.
This means when we don't pass "-mcpu=xxx":
a) Code will be compiled for ARC700
b) Libs will used for ARC700
And if we happen to run on ARCv2 core like ARC HSxx we
won't be able to use target gcc w/o "-mcpu=xxx" which
is not very convenient as we want to build "target" toolchain
but not canadian-cross.
Note the trick here is we set TUNE_PKGARCH in just 2 values,
it is either "arc700" for all ARCompact cores (ARC750 & ARC770)
and "archs" for all ARCv2 cores (ARC HS38 & HS48), see [1].
This gives us usable defaults.
For cross-compilation we use TUNE_CCARGS for fine-tuning depending
on which HW features we have on the current target so that
we may have HW feature A & B or B & C or A & B & C, see [2].
[1] https://github.com/foss-for-synopsys-dwc-arc-processors/meta-synopsys/blob/master/conf/machine/include/tune-arcv2.inc#L4
[2] https://github.com/foss-for-synopsys-dwc-arc-processors/meta-synopsys/blob/master/conf/machine/include/tune-arcv2.inc#L34
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The glob.glob("/sstate/*/*/") is very time consuming, set
SSTATE_EXTRAPATHWILDCARD explicity to avoid that. This can save a lot of time
when there are many sstate files.
For example, I have more than 600,000 sstate files:
* Before
- Without disk caches
$ time python3 -c 'import glob; glob.glob("/sstate-cache/*/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_populate_sysroot.tgz*")'
real 4m32.583s
user 0m5.768s
sys 0m12.892s
- With disk caches
$ time python3 -c 'import glob; glob.glob("/sstate-cache/*/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_populate_sysroot.tgz*")'
real 0m4.111s
user 0m2.348s
sys 0m1.756s
* After
$ time python3 -c 'import glob; glob.glob("/sstate-cache.bak/universal/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_populate_sysroot.tgz*")'
- Without disk caches:
real 0m7.928s
user 0m0.172s
sys 0m0.124s
- With disk caches:
real 0m0.131s
user 0m0.088s
sys 0m0.044s
We can see that it saves about 3.8s with disk caches, and saves about 264s
without disk caches.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When tmux is built from a non-release Git version, its version number is
"next-X" where X appears to be the expected version number for the next
release. For example, when built from the current state of master, running
"tmux -V" yields:
tmux next-2.9
Currently check_tmux_pane_size only checks for the version being less than
1.9, so it seems unfair to fail with an obscure Python error in this case.
Let's just use the version number after the "next-" prefix if it is
present.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable testimage to support qemu slirp. Configure "QEMU_USE_SLIRP"
& "TEST_SERVER_IP" variables to enable slirp.
[YOCTO#10713]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable qemu for slirp. Initialize Qemurunner with slirp. Setup ip
and port attribute to enable connection with qemu running with slirp.
[YOCTO#10713]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable qemurunner for slirp. Retrieved the ip & port from host machine
to connect to qemu from host machine.
[YOCTO#10713]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Qemu do not use the ip input from external. It will
retrieve ip from QemuRunner instance and assign
ip value.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a new requirement of epiphany web browser.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
libdazzle is a new requirement
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove upstreamed patches.
Add a tweak to 0001-When-building-introspection-files-add-CMAKE_C_FLAGS-.patch
for Javascriptcore gir file (previously it was pre-compiled in tarballs).
Rebase 0001-Fix-build-with-musl.patch
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Latest dnf versions have tweaked it.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
License-Update: spelling fixes
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
expat dependency has been replaced by libxml
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updates the system blacklists to include packages that are known to have
problems compiling under icecream
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The system blacklists are moved to variables which are ignore when
hashing. This prevents changes to the blacklists from causing all
taskhashes to change (and thus rebuild).
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This testcase fails on mips32. The process is killed by SIGBUS which
is not as expect.
This is because:
((void *)-1) is not a legal bad address which causes the process
killed by SIGBUG on mips.
'tst_get_bad_addr()' returns an address that should works on mips
and other arches.
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The patch in question was reworked, merged and released by
upstream version 20180926, as commit 822ad2043379.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a hard requirement of the new libdnf versions.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Splits the SDK test implementation into configurable Python classes. The
classes used for the normal and extensible SDKs are
${TESTSDK_CLASS_NAME} and ${TESTSDKEXT_CLASS_NAME} respectively.
This allows SDK machines to override the classes used to implement the
tests. For the traditional SDK, a common "run()" function is provided by
the class (oeqa.sdk.testsdk.TestSDK), with several hook member functions
that can be overridden in child classes, making it easier to have
consistent behavior. The extensible SDK class
(oeqa.sdkext.testsdk.TestSDKEXT) also has a common "run()" function, but
no hooks have yet been added as there is not currently a known use case
for create derived classes.
These changes should be purely organizational; no functional changes
have been made to either the standard SDK or extensible SDK tests.
[YOCTO #13020]
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use PV and BPN in SRC_URI as a minor improvement.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If sqlite3 is built with FTS5 it uses log() from libm, it sqlite3 is built
with READLINE it uses tgetent from a curses lib and readline from libreadline,
if it is built using deflate from libz ... , but all that linkage is lost
if we manually statically link so explicitely extract extra static linking
options from pkg-config and force them into pseudo as well.
This commit obsoletes (so include the implicit revert)
e39fec613d pseudo: fix link with new sqlite3
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update SQLite3 from 3.25.2 to 3.25.3 to fix following issues:
* Disallow the use of window functions in the recursive part of a CTE.
* Fix the behavior of typeof() and length() on virtual tables.
* Strengthen defenses against deliberately corrupted database files.
* Fix a problem in the query planner that results when a row-value
expression is used with a PRIMARY KEY with redundant columns.
* Fix the query planner so that it works correctly for IS NOT NULL
operators in the ON clause of a LEFT JOIN with the
SQLITE_ENABLE_STAT4 compile-time option.
Also introduce PACKAGECONFIG tunables to enable/disable e.g. index
and search functions to allow shrinking the library for very small
targets.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
>From upstream:
Turning on ECN still causes slow or broken network on linux. Our tcp
is not yet ready for wide spread use of ECN.
https://github.com/systemd/systemd/issues/9748
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Go binaries were installed to ${libdir}/go/bin, and create symlink
in ${bindir}, while enabling multilib, libdir was extended (such as
/usr/lib64), but BASELIB was not (still /lib), so use
baselib (such as /lib64)) to replace
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Also add a missing libdl dependency to the native relocation patch,
which was not necessary with autotools.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
meson does it in a way that breaks oe builds (they export a bunch of PKG_CONFIG_ variables)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop patch included
0001-kexec-fix-for-Unhandled-rela-relocation-R_X86_64_PLT.patch
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This should help keep libx11 and libx11-diet in sync
by throwing an error when building
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
see: https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.40_release_notes
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop all CVE patches now included in update.
For details see: https://curl.haxx.se/changes.html
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A backported patch was removed.
The kmod option changed format in the new version so was adjusted accordingly.
The ptest package was improved to resolve failures in the tests/unit/
directory but disabling attempts to rebuild the binaries on target.
Various ptest libtool script wrappers are now replaced with real binaries
and since the test suite knows about these paths for dymanic libraries,
we put links in place for those.
A data file needed by one of the tests is also copied in.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are some fatal make errors that occur from the current ptest
for lttng-tools however since other tests are successful, those make
build failures were being ignored.
When upgrading, the order of test execution changed and the ptest failed
fatally straight away with the same errors.
Passing -k to make means it will try and run all the tests making the
test suite run more consistently over all lttng-tools versions.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The do_install now matches that from autotools.bbclass.
Document that brokensep is still needed.
Use a better form of handling of aclocal.m4
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The patches are all backports or have equivalent changes in the new
release so can be dropped.
Upstream reworked the install handling to use DESTDIR instead of INSTALLROOT
and we no longer need to create directories.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|