aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-support
AgeCommit message (Collapse)Author
2012-09-25libcap: Fix erroneous path in last commitPhil Blundell
The directory used as SBINDIR should be ${sbindir} not ${base_sbindir}. Reported by Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-24libcap: respect ${base_sbindir}Phil Blundell
Need to pass the path explicitly to "make install" to ensure that the binaries end up in the right locations. Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-24sqlite3: enable USE_PREADPhil Blundell
This gives a small but measureable performance improvement for I/O heavy workloads. Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-09-18recipes: bump PR to rebuild after libffi5 -> libffi6Martin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-14taglib: Update to v1.8Andrei Gherzan
Patches not needed anymore - they switched to cmake. LGPL license was replaced with the actual LGPL 2.1 file. License section in audioproperties.h file was modified as it includes the new address of Free Software Foundation. libtag static library is not built by default anymore and if cmake is instructed to build static library than shared library is deactivated. So actually this is a switch now. Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-12libexif: upgrade to 0.6.21Constantin Musca
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-12boost: upgrade to 1.51.0Constantin Musca
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-09-12libgpg-error: Use the source file for the licence checksumRichard Purdie
It makes sense to us the license checksum from the source .in file rather than that from the generated file which configure can change (or remove). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-08-31nativesdk: Switch to using nativesdk as a prefix, not a suffixRichard Purdie
As discussed on the mailing lists, using a suffix to package names is hard and has lead to many recipes having to do PKGSUFFIX games. Its looking extremely hard to scale nativesdk much further without hacking many recipes. By comparison, using a prefix like multilib does works much better and doesn't involve "hacking" as many recipes. This change converts nativesdk to use a prefix using the existing multilib infrastructure. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-25npth: upgrade to 0.91Constantin Musca
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-08-25libcap: fetch from DebianMarcin Juszkiewicz
Original location was kernel.org and it was not restored after server was hacked. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
2012-08-23libiconv: skip recipe if using eglibcPaul Eggleton
libiconv is provided for use with uClibc - if you build it together with eglibc (which already PROVIDES virtual/libiconv) you can end up with dependency problems during do_rootfs. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-08-23gmp-4.2.1: Set CC_FOR_BUILD to ensure the host system compiler is used, not ↵Richard Purdie
the target one This addresses errors like: | NOTE: make -j 16 | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/qemux86 `test -f 'gen-fac_ui.c' || echo './'`gen-fac_ui.c -o gen-fac_ui | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/qemux86 `test -f 'gen-fib.c' || echo './'`gen-fib.c -o gen-fib | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/qemux86 `test -f 'gen-bases.c' || echo './'`gen-bases.c -o gen-bases -lm | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/qemux86 `test -f 'gen-psqr.c' || echo './'`gen-psqr.c -o gen-psqr -lm | ./gen-fac_ui 32 0 >mpz/fac_ui.h || (rm -f mpz/fac_ui.h; exit 1) | ./gen-bases header 32 0 >mp_bases.h || (rm -f mp_bases.h; exit 1) | ./gen-bases table 32 0 >mpn/mp_bases.c || (rm -f mpn/mp_bases.c; exit 1) | ./gen-fib header 32 0 >fib_table.h || (rm -f fib_table.h; exit 1) | ./gen-bases: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory | ./gen-bases: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory | ./gen-fib table 32 0 >mpn/fib_table.c || (rm -f mpn/fib_table.c; exit 1) | make: *** [mp_bases.h] Error 1 and matches the fix for the other gmp version. [YOCTO #2992] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-17apr-util: fix the rules.mk with path to sysroot instead of the workdir of aprJackie Huang
The copying for rules.mk was happened in do_configure_prepend, but it will be replaced by the one generated by configure, in which APR_MKEXPORT points to the workdir of apr and cause compile filure when the workdir of apr is removed. So change the copying in _prepend to _append. [YOCTO #2947] Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-13createrepo: add wrapper script to fix pathsPaul Eggleton
Fixes sstate relocation due to the path to /etc/rpm being baked into the libraries - this manifested in the form of the following assertion at runtime: python: dbconfig.c:493: db3New: Assertion `dbOpts != ((void *)0) && *dbOpts != '\0'' failed. Fixes [YOCTO #2753]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-06atk: package update 2.2 -> 2.4Radu Moisan
Signed-off-by: Radu Moisan <radu.moisan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-06curl: disable ldap/ldaps explicitlyMartin Jansa
* openldap from meta-oe is autodetected and then libldap-2.4-2 runtime dependency added to curl and almost all meta-efl recipes Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-06python: Fix to support the python module _bsddb built with db 5.3Jackie Huang
_bsddb module in python 2.7 could be built only with db version between 4.1 and 4.7. A patch was added to avoid build warning about this for [YOCTO #1937] but not actually fixed it. This patch enable _bsddb module be built with db 5.3, and remove --disable-statistics from the DB5_CONFIG to fix segmentation fault when using _bsddb module in python. [YOCTO #2749] Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-01createrepo 0.4.11: create wrapper for python scriptRobert Yang
The native python is installed to ${STAGING_BINDIR_NATIVE}/python-native/python, so we should use wrapper for the python script. [YOCTO #2822] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-01createrepo 0.4.11: add rpm-createsolvedb.pyRobert Yang
Move scripts/rpm-createsolvedb.py to meta/recipes-support/createrepo/createrepo/ since we should wrap it to use the native python. [YOCTO #2822] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-27polkit/vte/gupnp/gssdp: Replace introspection hacks with ↵Richard Purdie
gobject-introspection-stub Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-26libpcre: upgrade to ver. 8.31Cristian Iorga
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-26Add missing Upstream-Status to various patches.Mark Hatle
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
2012-07-22vte: cleanup thanks to new gtk-doc.bbclassRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2012-07-22atk: cleanup thanks to new gtk-doc.bbclassRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2012-07-20createrepo 0.4.11: fix the RDEPENDSRobert Yang
The libxml2-native and rpm-native should be ready before createrepo runs since it needs "import libxml2 rpm". The target createrepo needs libxml2-python when run, but the libxml2 doesn't generate the python module (disabled). We may need to fix it or rename the recipe to createrepo-native_0.4.11.bb. This recipe is only for the rpm backend system. [YOCTO #2753] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-19Remove a number of unneeded import os/bb callsRichard Purdie
The bb and os modules are always imported so having these extra import calls are a waste of space/execution time. They also set a bad example for people copy and pasting code so clean them up. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-19Convert tab indentation in python functions into four-spaceRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-18fix my typos in patch headersNitin A Kamble
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-17gnutls: Fix build with automake 1.12.1Nitin A Kamble
Added new patches: avoid_AM_PROG_MKDIR_P_warning_error_with_automake_1.12.patch gnutls_fix_for_automake_1.12.1.patch more details in patch headers. Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gpgme: fix build with automake 1.12.xNitin A Kamble
automake 1.12.x automatically deletes empty directories, so the additional rmdir from the do_install_append fails. cleanup the do_install_append for automake 1.12.x Avoids this build issue: | rmdir: failed to remove `/srv/home/nitin/builds2/build0/tmp/work/i586-poky-linux/gpgme-1.3.2-r0/image/usr/libexec': No such file or directory | ERROR: Function failed: do_install Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17libunistring: fix build with automake 1.12Nitin A Kamble
Added a new patch: libunistring/libunistring_fix_for_automake_1.12.patch More comments in the patch header. Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17libfm: fix build with automake 1.12.xNitin A Kamble
automake 1.12.x automatically deletes empty directories, so the additional rmdir from the do_install_append fails. cleanup the do_install_append for automake 1.12.x Avoids this build issue: | rmdir: failed to remove `/srv/home/nitin/builds/build-gcc47/tmp/work/i586-poky-linux/libfm-0.1.17-r4/image/usr/lib/gio/modules/': No such file or directory NOTE: package libfm-0.1.17-r4: task do_install: Failed Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17libgcrypt: fix build with automake 1.12.xNitin A Kamble
automake 1.12.x automatically deletes empty directories, so the additional rmdir from the do_install_append fails. cleanup the do_install_append for automake 1.12.x avoid this issue: | rmdir: failed to remove `/srv/home/nitin/builds/build-gcc47/tmp/work/i586-poky-linux/libgcrypt-1.5.0-r0/image/usr/sbin': No such file or directory NOTE: package libgcrypt-1.5.0-r0: task do_install: Failed no PR bump as no change in the output Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gnutls: Fix build with automake 1.12.1Nitin A Kamble
Added new patches: avoid_AM_PROG_MKDIR_P_warning_error_with_automake_1.12.patch gnutls_fix_for_automake_1.12.1.patch more details in patch headers. Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17boost: Upgrade recipe to 1.50.0Khem Raj
1.49.0 is not buildable with eglibc 2.16 since it exposes a define TIME_UTC which is also used in boost until 1.50.0 when it was renamed to TIME_UTC_ so instead of porting needed patches we upgrade boost to latest release Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gettext,m4,augeas,gnutls: Account for removal of gets in eglibc 2.16Khem Raj
These recipes use gnulib which needs this change to use gets when its defined and not otherwise. Until that change goes into gnulib and then all these package upgrade gnulib in their sourcebase we patch them Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-16gmp: upgrade to 5.0.5Bogdan Marinescu
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-10gnupg: ensure deterministic build by disabling libcurlSaul Wold
gnupg has it's own fake curl, since we use gnupg with zypper, there does not seem to be a strong reason to add curl to the depends list. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-09curl: upgrade to 7.26.0Alexandru DAMIAN
Config system changed from 7.24.0 and the noldlibpatch is no longer needed, thus deleted. Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
2012-07-09gnutls: make sure native is patched for gettext versionSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-04gnutls: use lib_package bbclassSaul Wold
This is a clean-up following the recent addition of PN-bin to bitbake.conf and lib_package Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-04db: use lib_package bbclassSaul Wold
This is a clean-up following the recent addition of PN-bin to bitbake.conf and lib_package Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-03icu 3.6: do_install failed: Segmentation faultRobert Yang
There is a "Segmentation fault" error when the tmpdir is longer than 470 (or less), this is because it used "char cmd[1024]" which is not enough for the command line. Allocate a larger memory size should fix this problem. [YOCTO #2664] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2012-07-02site/common-linux: fix incorrect size of pid_t for aprPaul Eggleton
If cross-compiling, apr's configure script assumes that pid_t is 64-bit which is wrong - it appears that 32-bit is a safe assumption for Linux no matter what the architecture, so use that instead by default. This fixes Apache writing garbage to its pid file when built using apr produced from this recipe. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-02apr: add util-linux to DEPENDS for libuuidPaul Eggleton
apr will use libuuid if it is present, and thus we should require that it is there so that we have a deterministic build. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-29apr: Install apr-local libtool in build dirJoe MacDonald
Building apache with this version of apr would blow up on the results from: apr_config --apr-libtool Errors of the form: /bin/sh: /media/large/tmp/sysroots/x86_64-linux/usr/share/build-1/libtool: No such file or directory Fix that by ensuring libtool from apr's build lands in .../usr/share/build-1/. Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-29icu 3.6: dropp apply=yes from pathRobert Yang
The "apply=yes" doesn't appear to be necessary, so drop it. [YOCTO #2664] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-25gnutls: Upgrade to 2.12.20Saul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-06-25libtasn1: Upgrade to 2.13Saul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-27 12:55:49 +0000