| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is only one version of python 2.x provided, so no need
to set a preferred version.
PYTHON_BASEVERSION is now set explicitly in python-dir.bbclass and
python3-dir.bbclass, so fix up a few recipes that relied on it being
set in default-versions.inc without inheriting python-dir.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
BUILD_SYS variables
The code that utilized them was superseded by the code (in the same patch!)
that is utilizing STAGING_LIBDIR/STAGING_INCDIR, and wasn't correct in the
first place as HOST_SYS is not necessarily the same as the sysroot directory
name.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
We had a partial musb change merged into the 4.1 tree, which resulted in:
| kernel-source/drivers/usb/musb/musb_dsps.c:
In function 'dsps_create_musb_pdev':
| kernel-source/drivers/usb/musb/musb_dsps.c:750:8:
error: 'struct musb_hdrc_config' has no member named 'maximum_speed'
| config->maximum_speed = usb_get_maximum_speed(&parent->dev);
| ^~
By backporting commit:
9b7537642cb6a [usb: musb: set the controller speed based on the config setting]
We get our missing structure field, and we can once again build musb.
[YOCTO: #9680]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Reverting the change that moved common-pc* to the intel staging
branches. This means that genericx86, qemux86*, etc, will continue
to use standard/base.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To provide timely support for Intel platforms, without risking
issues with other platforms, we create intel branches from the
common variants.
i.e. We now have standard/intel, which is from standard/base
These branches will be managed like any other in the tree, and
will get common -stable, -rt, bugs and CVE updates.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrating the following mainline backports for better Broxton
support:
Adrian Hunter (3):
mmc: sdhci: Remove SDHCI_SDR104_NEEDS_TUNING
mmc: mmc: Attempt to flush cache before reset
mmc: mmc: Fix partition switch timeout for some eMMCs
Andy Shevchenko (12):
device property: always check for fwnode type
device property: rename helper functions
device property: refactor built-in properties support
device property: keep single value inplace
device property: improve readability of macros
device property: return -EINVAL when property isn't found in ACPI
device property: Fallback to secondary fwnode if primary misses the property
mfd: core: propagate device properties to sub devices drivers
mfd: intel-lpss: Pass HSUART configuration via properties
device property: avoid allocations of 0 length
lib/string: introduce match_string() helper
device property: convert to use match_string() helper
Bamvor Jian Zhang (1):
gpiolib: do not allow to insert an empty gpiochip
Christophe RICARD (2):
ACPI: Rename acpi_gsi_get_irq_type to acpi_dev_get_irq_type and export symbol
ACPI / gpio: Add irq_type when a GPIO is used as an interrupt
Dasaratharaman Chandramouli (1):
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
Gwendal Grignou (1):
mmc: core: Do regular power cycle when lacking eMMC HW reset support
Heikki Krogerus (4):
device property: helper macros for property entry creation
device property: the secondary fwnode needs to depend on the primary
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
device property: fix for a case of use-after-free
Len Brown (2):
intel_idle: Add SKX support
intel_idle: add BXT support
Linus Walleij (1):
Revert "gpio: revert get() to non-errorprogating behaviour"
Mika Westerberg (7):
pwm: lpss: Remove ->free() callback
pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
device property: Take a copy of the property set
driver core: platform: Add support for built-in device properties
mfd: intel-lpss: Add support for passing device properties
mfd: intel-lpss: Pass SDA hold time to I2C host controller driver
mfd: intel-lpss: Pass I2C configuration via properties on BXT
Qipeng Zha (1):
pinctrl: intel: make the high level interrupt working
Richard Cochran (10):
intel_idle: remove useless return from void function.
intel_idle: Fix a helper function's return value.
intel_idle: Remove redundant initialization calls.
intel_idle: Fix deallocation order on the driver exit path.
intel_idle: Fix dangling registration on error path.
intel_idle: Avoid a double free of the per-CPU data.
intel_idle: Setup the timer broadcast only on successful driver load.
intel_idle: Don't overreact to a cpuidle registration failure.
intel_idle: Propagate hot plug errors.
intel_idle: Clean up all registered devices on exit.
Wolfram Sang (1):
mmc: make MAN_BKOPS_EN message a debug
qipeng.zha (1):
pwm: lpss: Update PWM setting for Broxton
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
- change in amdgpu firmware copyright year
- change in radeon firmware copyright year
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rename do_kernel_link_vmlinux to do_kernel_link_images and make a
symbol link to vmlinuz(if exists) for reference in arch/$arch/boot
directory.
Signen-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add KERNEL_IMAGETYPES to support building packaging and installing
multi types of kernel images, such as zImage uImage, at one time.
KERNEL_IMAGETYPE and KERNEL_ALT_IMAGETYPE work as before.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Updating to the korg stable release.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Merging the following meta data change:
[
In the current codes, we build the drivers for usb controller as
modules. But for some image types, such as minimal or
full-cmdline, these driver modules are not installed to the rootfs by
default. This makes the using of the usb pretty inconvenience. So
make them all builtin.
Reported-and-suggested-by: hiims <h@101.org.il>
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bumping to the v4.1.24 -stable release, and backporting a ppc
gcc6 fix from the 4.4 kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
PREFERRED_PROVIDER_virtual/kernel isn't set to linux-yocto-rt
* just like linux-yocto-dev is doing
* fixes following errors in world builds:
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt-sdk.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt-sdk' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt-sdk', 'linux-yocto-rt']
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt', 'linux-yocto-rt']
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Linux 4.5 and later cause lttng-modules versions prior to 2.7.2 to fail
to compile due to Linux vmscan changes. See lttng-modules git commit
d0d2908478bdc8c36faaeae6fcb687052cb5f93b on lttng-modules branch
stable-2.7: "Fix: update vmscan instrumentation for kernel 4.5".
Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It doesn't need them.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
"/usr/src/kernel" is being hard-coded in multiple recipes so far, move its
definition to bitbake.conf.
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Khem provided fixes to fix gcc6 build issues, these are safe for
all gcc versions, so we integrate them directly.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To enable modsetting out of the box, we must turn on DRM.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updating to the v4.4.9 korg -stable release:
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrating the korg -stable releases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When run the ptest of lttng-tools, it produced many random filename
when the tests passed, the output confused QA analysis, so we need
to filter the ptest output if tests passed and add up the passed and
failed tests.
NOTE:The tests invoked the run.sh twice, so it output like this:
...
FAIL:...
unit_tests statistics
total pass: 133 tests passed!
total fail: 5 tests failed!
...
FAIL:...
fast_regression statistics
total pass: 1904 tests passed!
total fail: 202 tests failed!
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the korg -stable releases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Merging the following commits to refactor and add broxton support:
0d73a3bf6129 bsp/intel-corei7-64: Add intel-telemetry feature
cee29e6234c7 features: add intel-telemetry feature
3a700d737b65 bsp/intel-common: Add broxton to supported SoCs in intel-core* BSPs
f584a0c22a39 features: add broxton soc feature
7c2c2bd1a6aa baytrail;valleyisland: Use designware-usb3 feature instead of config
7216db4cc7a6 features/usb: Add usb-designware2 and 3 features
ade182658359 cfg/sound.cfg: Add USB audio support
18ee21d9fba8 features/i915: Add CONFIG_KMS_FB_HELPER=y
b3fa745962c2 features/soc/skylake: Refactor and comment config fragment
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the following patches for skylake features and config:
82c2ea9f6bf intel-common: enable support for skylake in intel common bsp
269b6a7a98e2 intel-common-drivers: enable OSS Support
71a19d3e6dc6 intel-pinctrl: enable pinctrl driver for skylake
281f7db8c839 features: soc: enable configurations for skylake.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the following mainline (or mainline destined) patches to
support Intel Broxton:
076cc85486fd mmc: sdhci-acpi: Set MMC_CAP_AGGRESSIVE_PM for Broxton controllers
5d9c3aba78a1 mmc: sdhci-pci: Remove redundant runtime PM calls
aa0cd9a58d54 mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
f47597d00af0 mmc: sdhci: 64-bit DMA actually has 4-byte alignment
a052a0703aed mmc: sdhci: Fix DMA descriptor with zero data length
f9200dd4bfec mmc: sdio: Fix invalid vdd in voltage switch power cycle
7bbf49488269 mmc: sdhci: Do not BUG on invalid vdd
39fde8b630a6 tools/power turbostat: decode BXT TSC frequency via CPUID
2b4b633da512 tools/power turbostat: initial BXT support
ee708ab5b74e intel_telemetry_debugfs: Fix unused warnings in telemetry debugfs
3053465d066b intel_telemetry_pltdrv: Change verbosity control bits
4c7732ec34bf platform:x86: Add Intel Telemetry Debugfs interfaces
401915397ddc platform:x86: Add Intel telemetry platform driver
eaaee25ac936 platform/x86: Add Intel Telemetry Core Driver
44c969c62726 platform:x86 decouple telemetry driver from the optional IPC resources
a6a2ecaf9980 platform:x86: Add Intel telemetry platform device
e1f16b86eab0 intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend
ae91be46eb0d intel_pmc_ipc: Fix GCR register base address and length
3e15c1b19c81 intel_pmc_ipc: update acpi resource structure for Punit
5ec614cfd985 intel_punit_ipc: add NULL check for input parameters
4c3f01b178db platform:x86: add Intel P-Unit mailbox IPC driver
4826dbaac15f usb: dwc3: pci: add ID for one more Intel Broxton platform
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In the better late than never category, this commit integrates the
ltsi content into linux-yocto 4.1. We we already matching LTSI on
the kernel version front with a small gap in patches. With this
commit, we have a "ltsi" branch that is pure ltsi on the mailine
kernel, and then that commit is merged into standard/base (to
make it available to all BSPs).
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the korg -stable releases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When working on the yocto-bsp and kernel-lab update for yocto 1.2
we found it was impossible for a end-user BSP to isolate patches
on a branch, since with the following commit:
[kernel-yocto: enforce SRC_URI specified branch]
Any new branch would be switched to whatever was specified on the
SRC_URI and undoing the work that the yocto-bsp tool did to support
board specific patches.
To fix this, we'll keep the enforcing of branch consistency enabled
by default, but introduce a variable "KMETA_AUDIT" that when not
set will skip the check.
There's no impact for existing users, and it is only something that
other plumbing commands and tools will need to use (or care about).
[YOCTO: #9120]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Robert P. J. Day reported that configuration fragments and kernel
features were not being found when organized in a particular manner:
linux
- $BOARD
- mm.patch
- mm.scc
- ssd_sil.cfg
- ssd_sil.patch
- ssd_sil.scc
- uio.cfg
.. etc
There was a bug in the tools that did not handle the mix of subdirs
properly and ended up leaving a trailing / on the elements *not* in
the $BOARD subdir. As a result, the configuration fragments were not
properly found when searching the include paths, and a configuration
failure was triggered (due to missing files).
This change tweaks the tools to always check a path with and without
a trailing / when processing config fragments so they can be later
found when processing the configuration of the kernel.
Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
backporting a mainline commit to address splats that have been
seen on the 4.4 kernel:
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Integrating the following commit to have a more informative error
message:
uvesafb: print error message when task timeout occurs
The driver waits for response from user space for a pending
task until a timeout (UVESAFB_TIMEOUT) occurs. But the
existing error message in later steps is a little obscure.
This patch throws out an error message when timeout happens.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
commit a19cfee10c1f1762da601125c17035cf7701ce91
Author: Christopher Clark <christopher.clark6@baesystems.com>
Date: Thu Apr 14 17:00:20 2016 -0700
linux-firmware: break out bnx2 mips firmware and WHENCE license
Break out the bnx2 mips firmware into an independent subpackage.
Since the bnx2 firmware license is contained in the common WHENCE file
also package that separately so that other firmware that is licensed
within that file may depend upon a standalone package containing it.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When bootstrap calls autoreconf, it won't have AC_LOCAL set properly
so shared scripts may not be found: glib-2.0.m4 in this case.
Remove custom bootstrap code so autotools class handles this.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of passing DESTDIR just in the make install invocation, pass it in
EXTRA_OEMAKE. This appears to stop perf from rebuilding at instal time for me,
which appears to be the trigger for the random build failure.
[ YOCTO #9182 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
An always on configuration of aufs4 crept into the default kernel
configuration blocks.
With this change, aufs-enable.scc can be used to turn on aufs via
a KERNEL_FEATURES entry. We can now have co-existing unionfs solutions
and can update them without breaking builds that haven't opted-in.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Merging the following two commits:
ab0d998117cc ktypes/tiny/tiny.cfg: support /proc/sys
349e9ce59f7b features: enable pinctrl driver for Broxton
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ASoC HDMI audio backports + mmc fixes backports + misc enablement
changes (all backports):
db28bb1e7a68 async: export current_is_async()
e89355d51cc4 PM / runtime: Add new helper for conditional usage count incrementation
dcf8de0931b1 ALSA: hda - hdmi defer to register acomp eld notifier
da1bcdb4415e ALSA: hda - Allow i915 binding later in codec driver
fb95901a1724 ALSA: hda - Enable audio component for old Intel PCH devices
0a082020f0c4 ALSA: hda - Autosuspend controller after probe even if codecs are already suspended
7f7608752b37 ALSA: hda - hdmi add wmb barrier for audio component
7a32403bb06f ALSA: hdac: add snd_hdac_ext_bus_link_power_up_all
0d593c9fcf75 ALSA: hdac: Add support for hda DMA Resume capability
e453b7e42563 ALSA: hdac: structure definition for ext_dma_params
da5b15cea3a0 drm/edid: Add API to help find connection type
723224e90dfe ASoC: hdac_hdmi: Fix codec power state in S3 during playback
006d407c400d ASoC: hdac_hdmi: Fix to use dev_pm ops instead soc pm
149316f63e17 ASoC: hdac_hdmi: Add broxton device ID
f94dc80e4ac5 ASoC: hdac_hdmi: Fix infoframe programming
623b2f9b33f1 ASoC: hdac_hdmi: Add PM support
9d0c9e8114f8 ASoC: hdac_hdmi: Fix to reconfigure registers in runtime resume
4afb4f7a3760 ASoC: hdac_hdmi: Don't fail in dai startup to make userland happy
ec497d3f13c3 ASoC: hdac_hdmi: Enable playback on all enumerated ports
d94da5c4fe3b ASoC: hdac_hdmi: Apply constraints based on ELD
401a43cac5a4 ASoC: hdac_hdmi: Fix to wait for D3 before powering off codec
69fd08bfd8a8 ASoC: hdac_hdmi: Fix to keep codec power active during enumeration.
fe945a86a8c8 ASoC: hdac_hdmi: Fix possible memory leak in hw_params
2e2a20f383c4 ASoC: hdac_hdmi: Remove 'edev' NULL check
9f781dd80b54 ASoC: hdac_hdmi: Add infoframe support for dp audio
b8110510884a ASoC: hdac_hdmi: Add jack reporting
1cdebc2d6e78 ASoC: hdac_hdmi: Create widget/route based on nodes enumerated
73b4b1dc5b63 ASoC: hdac_hdmi: create dais based on number of cvts
e59b34525953 ASoC: hdac_hdmi: Enable DP1.2 and all converters/pins
760989e722ef ASoC: hdac_hdmi: Add hotplug notification and read ELD
30364a5601ae ASoC: hdac_hdmi: remove unused hdac_hdmi_query_pin_connlist
2764583d744e ASoC: hdac_hdmi: Use list to add pins and converters
9458ca02aa7e ASoC: hdac_hdmi: Fix to warn instead of err for no connected nids
477a88699c5e ASoC: hdac_hdmi: Fix to check num nodes correctly
acdc6421f720 ASoC: hdac_hdmi: use dev_to_hdac_dev and to_ehdac_device
bd4ba9cdf188 ASoC: hdac_hdmi: check error return
b6898f18eaca ASoC: hdac_hdmi: fix possible NULL dereference
4836a9c5bc4e ASoC: hdac_hdmi: Use i915 component framework for PM
c70f3eab8f81 ASoC: hdac_hdmi: Setup and start infoframe
f0f09f63f4f5 ASoC: hdac_hdmi: Add hdac hdmi dai ops
4bab2c42e58a ASoC: hdac_hdmi: Add PM support for HDMI
d1237b8c1a21 ASoC: hdac-hdmi: Add hdmi driver
0e0a7bb86eb8 mei: me: add broxton pci device ids
2af333b2beee usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
7ae2e3bce771 dmaengine: idma64: set maximum allowed segment size for DMA
53e822a3c638 dmaengine: idma64: drop IRQ enable / disable in handler
97e4071b6885 spi: pxa2xx: Fix too early chipselect deassert
46cc317c74dd i2c: designware: remove redundant lock
03a6b1c85e0a i2c: designware: Prevent runtime suspend during adapter registration
d5da4042ad5b mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers
c3d97cf9fe19 mmc: sdhci-pci: Do not set DMA mask in enable_dma()
f20ad778b58e mmc: sdhci-pci: Do not default to 33 Ohm driver strength for Intel SPT
ca9a77c6869b mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout
74982dc84940 mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
8017269a25bf mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
b532b30c3e41 mmc: sdhci: Allow override of get_cd() called from sdhci_request()
9e96c0c00221 mmc: sdhci: Allow override of mmc host operations
0148b3601f29 gpio-pca953x: fix the "drive" property cannot read/write
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backporting SPI changes for the Broxton and Apollo lake:
91f62d4a0a31 spi: pxa2xx: derive struct chip_data from struct drv_data
a9ed63a84921 spi: pxa2xx: Remove CONFIG_SPI_PXA2XX_DMA
f218d99d91ad spi: pxa2xx: Remove redundant call to lpss_ssp_setup() in probe
c02fa78f26b3 spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI
7e576a63daf8 spi: pxa2xx: Add support for Intel Broxton
5afb534233ea spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals
9dfe49803d54 spi: pxa2xx: Add output control for multiple Intel LPSS chip selects
c3ea9f8cb427 spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific
769387d447c6 spi: pxa2xx: Align a few defines
c4d5f4b2c5e1 spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select
cef6fd04c480 spi: pxa2xx: Convert unique ID string of ACPI device as unsigned integer
5cd1fcbbe756 spi: pxa2xx: move debug messages to pump_transfer()
86d77af087c1 spi: pxa2xx: choose closest lower speed
b92f9ddf2a03 spi: pxa2xx: Remove unused psp member variable from struct chip_data
eead50ab6d02 spi: pxa2xx: Remove empty function pxa2xx_spi_dma_resume()
59956c05a4c1 spi: pxa2xx: Use ACPI_COMPANION() instead of acpi_bus_get_device()
362498a7e09b spi: pxa2xx: Set the max_speed_hz of the master
34b9b6d72a6e spi: pxa2xx: Remove cr0 variable from struct chip_data
906a045e325a spi: pxa2xx: Remove if statement that is always true in pump_transfers()
9dcbad25be03 spi: pxa2xx: Remove two variables from struct chip_data
3a166657678e spi: pxa2xx: Add terminating entry for pxa2xx_spi_pci_compound_match
f8912dd06280 spi: spi-pxa2xx: Remove unused legacy PXA DMA API channel numbers
b75adec5ab03 spi: pxa2xx: Add support for Intel Sunrisepoint
54f13620b12e spi: spi-pxa2xx: Remove clk.h include
c4dcefa9a892 spi: pxa2xx: Constify ACPI device ids
e1deb5e11adc spi: spi-pxa2xx: remove legacy PXA DMA bits
1cae65e20310 spi: pxa2xx: Make LPSS SPI general register optional
dffc716a7725 spi: pxa2xx: Prepare for new Intel LPSS SPI type
9641b2e46b6a spi: pxa2xx: Differentiate Intel LPSS types
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The gpio_drive_show/store use incorrect gpio_desc,
this causes the drive sysfs property cannot be used,
This patch fixes this issue
Upstream-status: Inappropriate, custom code for legacy userspace
Signed-off-by: Yong Li <yong.b.li@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: After meta data application, the kernel tree branch is standard/tiny/common-pc. The
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: SRC_URI specified branch standard/tiny/base. The branch will be forced to standard/tiny/base,
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: but this means the board meta data (.scc files) do not match the SRC_URI specification.
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: The meta data and branch standard/tiny/base should be inspected to ensure the proper
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: kernel is being built.
Use standard/tiny/common-pc which is pointed by the .scc to fix problem.
Btw, standard/tiny/base and standard/tiny/common-pc points to the same
commit id.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It only works with qemux86, but mismatched qemux86-64 which caused
runtime errros. (kernel is bigger, can't boot, no output, and so on).
Add '$' in the end to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrating the following commit:
[
Add support for Intel R200 depth camera in uvc driver.
This includes adding new uvc GUIDs for the new pixel formats,
adding new V4L pixel format definition to user api headers,
and updating the uvc driver GUID-to-4cc tables with the new formats.
Tested-by: Greenberg, Aviv D <aviv.d.greenberg@intel.com>
Signed-off-by: Aviv Greenberg <aviv.d.greenberg@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Integrating the following mainline destined commits to fix PAT issues with
32bit x86 and qemu:
bc22b90fb583 x86/pat: Document the PAT initialization sequence
c534b1ec1991 x86/xen, pat: Remove PAT table init code from Xen
cd47692e804f x86/mtrr: Fix PAT init handling when MTRR is disabled
039434bdc165 x86/mtrr: Fix Xorg crashes in Qemu sessions
c08196e8064c x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()
6928fce8c766 x86/mm/pat: Add pat_disable() interface
3163c8d5468d x86/mm/pat: Add support of non-default PAT MSR setting
With this change applied, we once again have working graphics and no special
work arounds.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 94abdb2eea610b174064978d2fb8354a6231fc0c.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Alexander Kanavin
Bruce Ashfield
Maxin B. John
He Zhe
Martin Jansa
Andrew Bradford
Robert Yang
Ming Liu
Khem Raj
Peter Kjellerstedt
Dengke Du
Christopher Clark
Jussi Kukkonen
Ross Burton