summaryrefslogtreecommitdiffstats
path: root/meta/recipes-graphics/xorg-proto
AgeCommit message (Collapse)Author
2018-11-21xcb-proto: use python3native to have reproducible pyc filesRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-06-18Remove libdir specification from xorgproto .pc filesJeremy Puhlman
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-05-04xorgproto: Replace individual depreciated xorg proto recipes with xorgprotoArmin Kuster
Xorg upstream have replaced the individual xorg proto repositories with one master repository. This converts to the new system. The only one not included is calibrateproto which was depreciated entirely and replaced be xinput. We can drop this entirely. Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-05-04xcb-proto: update to 1.13Armin Kuster
drop patches included in update Signed-off-by: Armin Kuster <akuster@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018-03-07xproto: refresh patchesRoss Burton
The patch tool will apply patches by default with "fuzz", which is where if the hunk context isn't present but what is there is close enough, it will force the patch in. Whilst this is useful when there's just whitespace changes, when applied to source it is possible for a patch applied with fuzz to produce broken code which still compiles (see #10450). This is obviously bad. We'd like to eventually have do_patch() rejecting any fuzz on these grounds. For that to be realistic the existing patches with fuzz need to be rebased and reviewed. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-03-06xcb-proto: solve python cache collisionRoss Burton
Because I didn't really want python3-native to be at the bottom of the entire X11 stack this recipe jumps through a small hoop to use the host Python to run some modules it installs into the sysroot. The Makefile compiles the Python module, which is good as the cache file is recorded in the sstate manifest so when the package is removed from the sysroot all of it is removed. However in an enviroment where the sstate is shared between multiple hosts it is possible that a different Python is used and this will generate a new cache when the code is executed, which is not recorded in the manifest. Eventually you'll end up with ownerless cache files in a sysroot which conflict with the same file coming from a sstate upgrade. Solve this with a SSTATE_INST_POSTRM which is ran when sstate is removed to ensure that there are no Python cache files left behind. [ YOCTO #11809 ] Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-24xcb-proto: don't compile for Python 2Ross Burton
Remove the do_install_append to create the Python 2 pyc files, as nothing in the build is using Python 2 anymore (libxcb is the only user, and that uses Python 3). Also use variables instead of a patch to control what Python binary and path the modules are installed to. Signed-off-by: Ross Burton <ross.burton@intel.com>
2018-02-09python-xcbgen: improve reproducibilityHongxu Jia
Use relative path to generate .pyc files could remove build host references which leads to non-reproducible builds. Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-11-29oe-core: take UPSTREAM_CHECK_COMMITS into use where possibleAlexander Kanavin
This greatly reduces the amount of recipes for which upstream version check fails: from about 30 to about 8. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-08-16selftest: fix distrodata.py to use per-recipe UPSTREAM_VERSION_UNKNOWN settingAlexander Kanavin
... instead of a global exception list which was problematic. [YOCTO #11896] Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-02-23presentproto: Upgrade 1.0 -> 1.1Jussi Kukkonen
Small release with mostly build system fixes. (From OE-Core rev: 638af9cff97cf3ead79226b616e29f9135cbf53d) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-10-28xproto: Upgrade 7.0.29 -> 7.0.31Jussi Kukkonen
Tiny bug fix releases. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15xcb-proto: fix for python3Robert Yang
Backport two patches to make it py3 friendly. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15xcb-proto: create .pyc files for python2Robert Yang
Its Makefile's do_install creates .pyc files for python3, now also create them for python2 so that they will be recorded by manifest, and can be cleaned correctly. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-23xorg-proto: remove stale git recipesRoss Burton
These two recipes are old and unmaintained, so remove them to avoid confusion with the tarball recipes. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-23inputproto: explicitly disable asciidoc to avoid floating dependencyRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20recipes-graphics: Added native and nativesdk support for some librariesFelipe F. Tonello
These libraries are used in some recipes outside oe-core, so we should add this class support to avoid duplication and bbappends on other layers. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-08meta: update patch metadataRoss Burton
Enforce the correct tag names across all of oe-core for consistency. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-06-23xcb-proto: use python3 instead of python2Ross Burton
We previously patched configure to stop looking around for a Python to use, and to use the Python binary and install paths that we specify. Now that we depend on Python 3 its possible that bitbake is being built on a machine without Python 2 installed, so hardcode the python3 interpreter instead. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-30xcb-proto: remove stale git recipe and now redundant .incRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-05-30xcb-proto: upgrade to 1.12Ross Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-05-17xproto: Upgrade 7.0.28 -> 7.0.29Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-17inputproto: Upgrade 2.3.1 -> 2.3.2Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-12videoproto: Upgrade 2.3.2 -> 2.3.3Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-12-27xcb: don't build-depend on python-nativeRoss Burton
xcb-proto had a dependency on python-native as it builds and installs a Python module, but xcb-proto is very low in the build to force a dependency on python-native. As it turns out libxcb simply asks pkg-config for the full path to the module xcb-proto installed and uses it directly so there is no need to build python-native. Instead replace AM_PATH_PYTHON with two explicit variable definitions (need to set PYTHON for automake's install logic). Also remove the dependency on xcb-proto-native as libxcb uses the data files and tooling from the target sysroot, and patching it to use the native sysroot adds complication for no good reason. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-12xproto: Upgrade 7.0.27 -> 7.0.28Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-20randrproto: upgrade to 1.5.0Ross Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-07kbproto: Upgrade 1.0.6 -> 1.0.7Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-07randrproto: Upgrade 1.4.0 -> 1.4.1Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-05-07xproto: Upgrade 7.0.26 -> 7.0.27Jussi Kukkonen
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-01-16presentproto: separate B and SRobert Yang
It works well now, and bump the PR to avoid: configure: error: source directory already configured; run "make distclean" there first Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2014-12-11libxcb, xcbproto: upgrade to version 1.11Awais Belal
Update libxcb and xcb-proto to 1.11 from 1.10. Signed-off-by: Awais Belal <awais_belal@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-07-23inputproto: upgrade to 2.3.1Ross Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-23fontsproto: upgrade to 2.1.3Ross Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16xorg-proto-common.inc: add missing dep for xmltoHongxu Jia
Add docbook-xml-dtd4-native and docbook-xsl-stylesheets-native to PACKAGECONFIG[xmlto]'s dep. [YOCTO #2416] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-10xorg-proto-common.inc: add PACKAGECONFIG for xmltoHongxu Jia
Support xmlto for documentation generation and disable it by default. [YOCTO #2416] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-23dri3proto: add it to oe-coreValentin Popa
mesa 10+ depends on this (if the user builds mesa with dri3 support enabled). So add it to oe-core. Signed-off-by: Valentin Popa <valentin.popa@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-04-30xproto: upgrade to 7.0.26Laurentiu Palcu
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-28autotools-brokensep: Mark recipes with broken separate build dir supportRichard Purdie
This patch goes through the OE-Core recipes and marks those which use autotools but don't support a separate build directory (${S} != ${B}). A new class, autotools-brokensep is used for this purpose. This doesn't introduce any change in behaviour in its own right. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-17recipes: convert remaining SUMMARY/DESCRIPTION cosmetic issuesMatthieu Crapet
Rename SUMMARY with length > 80 to DESCRIPTION. Note: don't bump PR Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-02-08presentproto_git.bb: add recipeLaurentiu Palcu
This is needed by xserver-xorg 1.15. Since presentproto has just been created, use a git recipe because the initial version is missing some fixes, license file, etc. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-08xextproto: upgrade to 7.3.0Laurentiu Palcu
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-21xcb-proto: upgrade to 1.10Ross Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-21glproto: upgrade to 1.4.17Ross Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-02Replace one-line DESCRIPTION with SUMMARYPaul Eggleton
A lot of our recipes had short one-line DESCRIPTION values and no SUMMARY value set. In this case it's much better to just set SUMMARY since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY is at least useful. I also took the opportunity to fix up a lot of the new SUMMARY values, making them concisely explain the function of the recipe / package where possible. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-11-27xproto: upgrade to 7.0.25Laurentiu Palcu
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-27xcb-proto: upgrade to 1.9Laurentiu Palcu
Also move xcb-proto recipes from xcb directory to xorg-proto directory. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-30recipes: Remove PR = r0 from all recipesRichard Purdie
Remove all PR = "r0" from all .bb files in oe-core. This was done with the command sed -e '/^PR.*=.*r0\"/d' recipes*/*/*.bb -i We've switching to the PR server, PR bumps are no longer needed and this saves people either accidentally bumping them or forgetting to remove the lines (r0 is the default anyway). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-29xorg-proto-common: set UNKNOWN_CONFIGURE_WHITELISTRoss Burton
This include adds configure options globally but not all X libraries support them, so to avoid unknown-configure-option warnings add them to the whitelist. Also change the options from --enable-foo=no to --disable-foo as they're clearer and the whitelist would have to contain --enable-foo. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30remove the unnecessary protocol parametersJackie Huang
It's not necessary to specify the protocol parameter when it's the default protocol for the fetcher, e.g. the default protocol for git fetcher it git, "protocol=git" isn't needed. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-27 14:58:53 +0000