Age | Commit message (Collapse) | Author |
|
* Update LICENSE's md5sum, the new version added a "of" in the file, the
license is the same.
* Remove ghostscript-9.02-parallel-make.patch, it has 932 lines and
modified 24 files, which is hard to maintain, and it can't be applied
since the code has changed, and if we meet parallel issues again, we
need fix it in other ways.
* Fix a build error of -Werror=return-type.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
* Add objarch.h for MicroBlaze big and little endian
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ghostscript application fails to fetch objarch.h file while building for armeb.
The fetch failure is due to absence of this file in the default set of
directories that the OpenEmbedded build system searches (i.e FILESPATH)
for patches and files. This patch adds the required objarch.h file for
armeb in one of the default locations where OpenEmbedded build system searches.
Signed-off-by: Krishnanjanappa, Jagadeesh <jagadeesh.krishnanjanappa@caviumnetworks.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
[YOCTO #7230]
In certain system configurations TRANSLATED_TARGET_ARCH will not
expand in the right order for gcc-cross-candian-mips64n32 to be
generated properly.
This will cause SDKs to fail to generate properly.
Changing the global definition of TRANSLATED_TARGET_ARCH always
expands the ABIEXTENSION, which causes the OVERRIDES to pick it up
as well. This effectively defines a new class of overrides for the 'n32'.
The side effect is that we need to duplicate some mips64 overrides, and
redefine others that were previously 'n32' or 'mips64' exclusive to have
the correct semantics.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Rebase cups-no-gcrypt.patch and ghostscript-9.02-parallel-make.patch to 9.15
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Backported for the ghostscript supplied cups code from
http://www.cups.org/strfiles.php/3308/cups-no-gcrypt.patch
This addresses the cryto dependency seen during build.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #5586]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ARCH_SIZEOF_GX_COLOR_INDEX on mips
The commit: http://ghostscript.com/pipermail/gs-cvs/2014-February/017271.html
newly added a 'compile time assert' on 9.14 that causes the build to fail if
the sizeof(GX_COLOR_INDEX_TYPE) is not equal to ARCH_SIZEOF_GX_COLOR_INDEX.
Disscuss on IRC:
http://ghostscript.com/irclogs/2014/02/06.html
The commit from OE-Core rev: 78a13ba170c1de6d7ef077854e3e34e18d17099f
...
ghostscript: add pregenerated objarch for mipsel/mips64/mips64el
...
has defined ARCH_SIZEOF_GX_COLOR_INDEX according to the type of archs,
and assigned 4 for mips/mipsel (8 for others).
The GX_COLOR_INDEX_TYPE was defined at do_configure time, which used
large color index (with 8) by default. We should manually choose the
opposite one (with 4) for mips/mipsel.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- The LICENSE added AGPL for the font files (in Resource/Font);
- Rebase ghostscript-9.02-parallel-make.patch to 9.14
- Rebase ghostscript-native-fix-disable-system-libtiff.patch
since base/configure.ac has been moved to configure.ac.
http://git.ghostscript.com/?p=ghostpdl.git;a=commitdiff;h=f1488c5aff54f37ee67759827d4298592af5dbc8
- Obsolete ghostscript-9.05-NOT-check-endian.patch, and add option
'--enable-little-endian'/'--enable-big-endian' conditionally to
intead.
http://git.ghostscript.com/?p=ghostpdl.git;a=commitdiff;h=e76dc46756e89a14a3348bce12a633d32e4fa831
- Add base-genht.c-add-a-preprocessor-define-to-allow-fope.patch
for native, since the upstream replace all fopen calls with
gp_fopen and add a preprocessor define so that any unintential
calls directly to fopen will cause an error. This patch add a
preprocessor define to allow fopen calling in base/genht.c as
exceptions.
http://git.ghostscript.com/?p=ghostpdl.git;a=commitdiff;h=773c69e46e70bdd5482676437dafd2ca83397643
- Remove package ghostscript-cups, since CUPS filters
gstoraster and gstopxl has been moved to cups-filters
which is a free software package hosted by OpenPrinting.
http://git.ghostscript.com/?p=ghostpdl.git;a=commitdiff;h=9304a21699a6c17579fae32f44f5c92a37c13e2d
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/cups-filters
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch goes through the OE-Core recipes and marks those which use autotools
but don't support a separate build directory (${S} != ${B}). A new class,
autotools-brokensep is used for this purpose.
This doesn't introduce any change in behaviour in its own right.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove --without-jasper since the jasper had been removed:
commit 6070a6f33bebf7538e48219010bc1e4de8341ea8
Author: Ray Johnston <ray.johnston@artifex.com>
Date: Fri Aug 3 00:32:32 2012 -0700
Rip out jasper -- openjpeg is our JPX implementation.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some versions of patch (e.g. 2.6.1.136-31a7 on OpenSUSE 12.2) will
refuse to patch a file via a symlink (probably a fairly sensible
security precaution). The "base/" subdirectory specified within the
ghostscript-9.05-NOT-check-endian.patch file was being lost by the
default application with -p1, but this was not caught on most systems
due to the symlink. Fix the path so that we always patch the file
directly.
Fixes [YOCTO #4773].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Remove unuseful patch:
* 0001-make-ghostscript-work-with-long-building-directory.patch
Port applicable patches:
* ghostscript-9.02-genarch.patch
* ghostscript-9.02-parallel-make.patch
* ghostscript-9.02-prevent_recompiling.patch
* ghostscript-9.05-NOT-check-endian.patch
* ghostscript-native-fix-disable-system-libtiff.patch
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
[ CQID: WIND00394747 ]
The original patch removes endianness detection completely, causing lcms
to be built against the wrong endian. Instead, pass the correct endian
through the recipe using SITEINFO_ENDIANNESS.
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
[ CQID: WIND00389504 ]
Generated by building and running base/genarch.c.
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The ghostscript-native will check libtiff
automatically at configure time and libtiff
needs libjpeg. If libtiff and libjpeg is
just populated to staging native directories
and the host doesn't install them, the libjpeg
could not be linked, fail with:
|libjpeg.so.8, needed by libtiff.so, not found
|libtiff.so: undefined reference to
`jpeg_set_defaults@LIBJPEG_8.0'
|collect2: error: ld returned 1 exit status
Disable libtiff support to fix this issue and
modify configure to let disable system libtiff
could work.
We also explicity disable fontconfig, freetype,
cups for ghostscript-native to avoid the similar
issues.
[YOCTO #3562]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Update the upstream status for patches of long building path.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If TMPDIR has more than 256 chars, building ghostscript fails.
This violates the 410 length limit of TMPDIR.
This patch makes building ghostscript succeed by changing its
MAX_TOKEN from 256 to 512.
[YOCTO #2766]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If libidn is just populated to sysroot but rpm packages are not created,
build ghostscript will check libidn automatically and then depends on
libidn. But package libidn doesn't exist, so build image which contains
ghostscript will fail with:
| error: Failed dependencies:
| libidn11 >= 1.25 is needed by ghostscript-9.05-r2.i586
| libidn.so.11(LIBIDN_1.0) is needed by ghostscript-9.05-r2.i586
| libidn.so.11 is needed by ghostscript-9.05-r2.i586
Disable libidn support to fix this issue.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The file ${S}/configure.ac is a symlink which seems to confuse some patch
application tools but not in all cases. Whilst I'd love to understand why
there is a difference, this fixes the build failures by applying the patch
to the real file rather than the symlink.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update ghostscript to 9.05, and update ghostscript-9.02-genarch.patch
at same time because it can't be applied. Add patch
ghostscript/ghostscript-9.05-NOT-check-endian.patch
to forbid checking endianese.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* We have various variables which are either not quoted at all or are half
quoted. This patch fixes the bad exmaples so everything is consistent.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Cups filters are no longer built by default. Since ghostscript already depends
on cups, build the filters and package them as ghostscript-cups.
Ghostscript uses the cups-config script from the oe sysroots to determine some
of the target install paths, as well as to determine the linker path. The config
script gives out paths pointing to the sysroot, so some of the paths needed to
be adjusted in the Makefile.
Signed-off-by: James Limbouris <james@digitalmatter.com.au>
|
|
Avoding the autoreconf with a hardcoded do_configure is bad practise
since it can hide various errors. This patch ensures we do use the
standard do_configure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On my system, the sys/time.h header is in a subdir off /usr/include
which causes a build failure. Apply the target CFLAGS fix to native
builds as well to address this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There continue to be parallel make race issues showing up on the autobuilder.
This patch removes some potential sources of these. The rm is unrequired
since we're using cp -f. The || true ensures that if we did race against
someone it becomes harmless.
[YOCTO #1202]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the old version and update ghostscript to 9.04.
* update ghostscript-9.02-prevent_recompiling.patch
* because soobj is not used any more, remove soobj related work
* gs provides a configure option --with-install-cups to install cups related
files but disabled by default, so need update post install scripts
Signed-off-by: Kang Kai <kai.kang@windriver.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
ghostscript uses a script called instcopy to install files first
to temp dir and then rm's and copies dirs|files to the final destination.
When parallel make happens multiple threads of this runs and tries to
remove existing directories with contents, not a good thing, therefore
disable parallel make for install.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This adds pregenerated files for powerpc64
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ghostscript has it's own hacky check for time.h which hard-codes paths, this
means in the native case it fails on systems such as Ubuntu 11.10 where the
location of time.h has changed. Further it means the target build has had a
host-intrusion issue.
This patch disables the check for time.h, future releases of ghostscript
use standard autotools checks for time.h's location.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
[YOCTO #1337]
Using ghostscript-native instead of ${PN}-native in DEPENDS to correct
the invalid DEPENDS in multilib cases.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
ghostscript fails some time on autobuilder, it seems a parallel build issue.
Add patch to fix it.
Fixes [Yocto #1202]
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
/etc/cups is owned by root:lp from the cups package, the associated
ghostscript was creating the /etc/cups directory as root:root. /etc/cups
is the authoritative source.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Build ghostscript-native fails on a i686 machine because it can't get
the source objarch.h and soobjarch.h, and .h files are not needed for
native package, so update the SRC_URI to fix it.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Removed the do_configure_prepend and folded into the target do_configure
since the native was picking it up for the do_configure_virtclass/native()
and then failing on i686.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
As a keyword, Upstream-Status is case sensitive.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
When run gs on mpc8315, it fails with:
GPL Ghostscript 9.02: ./psi/interp.c(291): Fatal error -20 in gs_interp_init!
It is caused by cross compile.
Accoding to the ghostscript document on:
http://pages.cs.wisc.edu/~ghost/doc/cvs/Make.htm#Cross-compiling
it needs some manual work, so import patches from WindRiver Linux.
Update to using oe way to add arch.h, thanks to Richard.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
|
|
Add ghostscript to pass LSB commands check and Printing test, and
ghostscript-native is added to help cross compilation.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
|