| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As the same reason with automake, extend autoconf to provide
nativesdk recipe too.
This patch was only used for autoconf that running on target:
* path_prog_fixes.patch: replace '@PERL@' with '@bindir@/env perl'
It's unavailable for autoconf-native and autoconf-nativesdk, so
exclude it for those two recipes.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We will provide autotools nativesdk in meta-tookchain for reconfigure
any autotools supported projects, as a part of the plan we should extend
their recipes first.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to provide autoconf-natviesdk in meta-toolchain, the
m4-nativesdk is required by it.
Both extend the m4 recipes for GPLv2 and GPLv3.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to provide autoconf-natviesdk in meta-toolchain, the
gnu-config-nativesdk is required by it.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
And rebase the patches to the newer source code
This patch is upstream hence deleting it from the recipe.
binutils/110-arm-eabi-conf.patch
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
Add Patch to disable the XML::Parser check in the target
intltool.m4, this check will find the host (not native)
XML::Parser if it's installed possibly causing Host
contamination, but will also fail configuration if XML::Parser
is not installed on the host.
Since we know that XML::Parser is installed on the image, we don't
really need this check, so comment it out.
From RP in mail thread:
> If the recipe needs perl for
> some other reason than intltool, it needs perlnative but it if only
> needs perl for intltool, we shouldn't need the dependency. The .m4 macro
> checks are well intended but don't fit the way we use perl. I really
> don't want to end up in a position where intltool automatically means we
> have to add perlnative as a dependency and we've previously seen many
> problems related to that.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This fixes the following issue:
Log data follows:
| NOTE: Creating RPM package for perf-dbg
| NOTE: Creating RPM package for perf
| NOTE: Creating EMPTY RPM Package for kernel
| NOTE: Creating EMPTY RPM Package for kernel-3.0.9-00348-gec4b357
| NOTE: Creating RPM package for kernel-image-3.0.9-00348-gec4b357
| NOTE: Creating RPM package for kernel-dev
| NOTE: Creating RPM package for kernel-vmlinux
| NOTE: Not creating empty RPM package for kernel-misc
| NOTE: Creating RPM package for kernel-devicetree
| NOTE: Creating RPM package for kernel-module-libcrc32c
| NOTE: Creating RPM package for kernel-module-crc-itu-t
| NOTE: Creating RPM package for kernel-module-sctp
| NOTE: Creating RPM package for kernel-module-pcbc
| NOTE: Creating RPM package for kernel-module-crc32c
| NOTE: Creating RPM package for kernel-module-binfmt-misc
| NOTE: Creating RPM package for kernel-module-nfsd
| NOTE: Creating RPM package for kernel-module-exportfs
| NOTE: Creating RPM package for kernel-module-msdos
| NOTE: Creating RPM package for kernel-module-nls-utf8
| NOTE: Creating RPM package for kernel-module-udf
| NOTE: Creating RPM package for kernel-module-isofs
| NOTE: Creating RPM package for kernel-module-usbhid
| NOTE: Creating RPM package for kernel-module-scsi-wait-scan
| NOTE: Creating EMPTY RPM Package for kernel-modules
| /local/home/mattsm/git/fsl-local-sdk/build_p4080ds_release/tmp/sysroots/x86_64-linux/usr/bin/rpmbuild.real: error while loading shared libraries: liblzma.so.5: cannot open shared object file: No such file or directory
| ERROR: Function 'BUILDSPEC' failed (see /local/home/mattsm/git/fsl-local-sdk/build_p4080ds_release/tmp/work/p4080ds-fsl-linux/linux-qoriq-sdk-3.0.6-r2/temp/log.do_package_write_rpm.18943 for further information)
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
This patch introduces a distro feature which enables gcc to produce
both 32bit and 64bit code, and enables binutils to operate on both
32bit and 64bit binaries. It differs from multilib toolchains in
that it does not require to compile a version of the libc for each
architecture variant. However, the code produced for the secondary
architecture will not be linkable against the libc.
v2: - Renamed the feature name from "biarch" to "multiarch". The GCC
installation manual claims that the mips-linux can be made a tri-arch
compiler (http://gcc.gnu.org/install/configure.html)
- For x86_64, the compiler is made bi-arch by default, so nothing
has to be done in particular.
- I analyzed the gcc/config.gcc from GCC sources and added in this
patch all the architectures that could be made biarch with the version
of gcc currently used in OE, which are powerpc, and sparc, in addition
to x86. mips and s390 will probably be supported in future versions of
gcc. For x86 and sparc, only the --enable-targets=all option is valid
to make this work (this option doesn't have any other side effects than
making the compiler bi-arch). For powerpc, I used the
--enable-targets=powerpc64 option (although 'all' also works).
Note: - Untested on powerpc and sparc. But I believe it works the same
as with x86.
- gcc in meta-toolchain is also made multiarch.
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
|
|
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
|
|
We have a patch unixccompiler.patch where we try to throw away
everything except first element of CC string but this does not
work if gcc is prepended with something e.g. CC="ccache gcc"
then the logic fails and it ends up in some modules failing on
you silently (_sqlite3) in my case.
The fix here is to drop basename so we keep the whole
string as it is and then the detection function searches
for gcc string in the whole CC. This works in both cases
one the original intent of the patch and the second described
above. One place where it will fail is if someone has non-gcc
compiler installed in some subdir which has gcc in it e.g.
/usr/gcc/fakecc but for OE this should never happen. Ideally
the the detection logic should have tried to execute gcc
and then parsed --version output or something.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
|
|
When I was trying self-hosted-image, eglibc's do_install failed in the target:
ERROR: cannot stat bootparam_prot.h:
the cause is: rpcgen doesn't work properly: rpcgen can't exec /lib/cpp since
it doesn't exist.
According to http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/lib.html:
"if a C preprocessor is installed, /lib/cpp must be a reference to it, for
historical reasons. The usual placement of this binary is /usr/bin/cpp".
Typical distros, like Ubuntu, openSuSE, Fedora and RHEL, all comply with
the rule.
Actually in meta/recipes-devtools/gcc/gcc-package-target.inc, we do try to
package ${base_libdir}/cpp:
FILES_cpp = "\
${bindir}/${TARGET_PREFIX}cpp \
${base_libdir}/cpp \
${libexecdir}/gcc/${TARGET_SYS}/${BINV}/cc1"
But unluckily we didn't create a symbol link in do_install.
This patch adds the symbol link.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
|
|
Fixes [YOCTO #1174]
Rpm logs will grow indefinitely, so change the config to flush those old logs.
Signed-off-by: Mei Lei <lei.mei@intel.com>
|
|
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
There is no point in having "executable" binaries in the .libs
directory linked with different rpaths to the target which
could concivably be run on the build system when cross compiling.
This patch removes the extra rpaths ($compile_rpath) so that the
output from the "link" stage can be used on the target. We can then
avoid having to "relink" during the install stage.
This saves some build time (do_install is over 2 minutes faster for
pulseaudio).
This patch also removes an annoying "seems to be moved" warning
which is totally bogus in the sysroot case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
apt wasn't building on modern libc/compiler combinations due to missing
header includes.
The libcpp version was also being hardcoded, this patch generates it
dynamically to work on different host systems which no longer have
this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport fix for PR 47551 fixes the ICE seen on armv7-a/qt4-x11-free
Bump up SRCREV past gcc 4.6.2 release
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should be using libtool-cross for cross compiling but
were not. This patch sets datadir so libtoolize ends up
containing correct paths. It then installs libtoolize.
The path ltmain.sh was installed to was incorrect and this is fixed.
We also now install all the libtool m4 macros and config files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove all the upstreamed and not needed patches.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
dpkg-native's update-alternatives is broken for offline work so
don't install it.
Also list update-alternatives in the multiprovider whitelist to
avoid unwanted multiple provider warnings when multiple package
backends are enabled.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Michael Brown <Michael_E_Brown@dell.com>
Port patch from base openembedded. Since 4.6 already has fixes for config.gcc,
the fix only requires a one line change to gcc-cross4.inc.
The patch was imported from the OpenEmbedded git server
(git://git.openembedded.org/openembedded) as of commit id
3aa8afe97e9cf1340feb9c4442a6ed88b7e32c96.
gcc-4.5: Fix toolchain builds for SH4/SH3
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use a yoctoproject.org based tarball since gnu-config is required very
early on in the native build process, we do not want to rely on git, which
can cause a circular dependency issue.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Licence has update timestamp and Copyright year.
This change needs a coresponding change to ASSUME_PROVIDED
to add git-native
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* intentionaly with negative D_P, bitbake fetcher should be improved to
detect old checkout with newer subversion available or vice versa and
do svn upgrade automaticaly or show better error, but subversion as
client for target or -native for distributions which explicitly say
they want 1.7 (with PREFERRED_VERSION) can be available already from
oe-core.
* be aware that checkouts from 1.7.0 are not compatible with older
subversion clients (ie when builder populating distro PREMIRROR is
using 1.7.0 all builders need to have also 1.7.0)
* and also 1.7.0 client needs to call svn upgrade in checkout first in
order to use it (so if PREMIRROR has tarball from 1.6.x it won't work
on client using 1.7.0 unless fetcher2 is improved to detect this and
call svn upgrade)
* tested on SHR distribution
http://wiki.shr-project.org/trac/wiki/Building%20SHR#subversion1.7inshr-chroot
* only missing part is to add subversion-native dependency, so that
native subversion is built, before building ie elementary (because EFL
are using svnversion from configure.ac to detect source revision and
.svn dir needs to be from compatible version).
* read http://subversion.apache.org/docs/release-notes/1.7.html
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
The version of dpkg the updates-alternatives-dpkg recipe pointed
at no longer used a perl script but a compiled binary. This meant
the "all" architecture field was invalid, as as the sed operation
during do_patch. All things considered the separate recipe was
pretty pointless.
This patch moves update-alternatives back to being built as part
of the dpkg recipe. It also moves various functionalty to the .inc
file which it belongs and fixes building and packaging of the dpkg
perl modules.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This path should be valid for a longer time, as only the current
release stays in main directory.
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When extracting packages onto the target system in particular, we
really want to ensure the name fields in the tarball are used over
and above the numerical uid/gid values. This patch adds this
functionality to opkg and ensures package upgrades work correctly
permission wise.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1755]
We change the want the RPM rootfs install works to install pre and post install
scripts. The new method uses a script helper that is invoked by RPM outside
of the normal chroot.
The wrapper is dynamically generated prior to the install starting. It will
check the return code of the script. If the script fails, it will store a copy
to be executed on the first system boot. This is similar to the previous
mechanism.
In addition, a line of debug was added to the scripts as written by package_rpm
to list which package and which script for later debugging, if necessary.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Commit 23d2eaf9 ('skip setup.py 'import check' when cross-compiling')
neglected bumping the PR, this adds it.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This is the result of running the following over the metadata:
sed \
-e 's:bb.data.\(setVar([^,()]*,[^,()]*\), *\([^ )]*\) *):\2.\1):g' \
-e 's:bb.data.\(setVarFlag([^,()]*,[^,()]*,[^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^() ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,()]*\), *\([^) ]*\) *):\2.\1):g' \
-i `grep -ril bb.data *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've had the check for dash as /bin/sh for a long time. Dash has been
around long enough now that most major issues have been identified and
fixed from build perspective.
This patch fixes a bashism in the openjade-native recipe. It also
adjusts libtool so that the header at the script is used and not the
value of $SHELL. This is because many Makefiles change $SHELL so dash
can get used to execute what is otherwise configured as a bash shell
script. Since we don't need to execute scripts this way on any system I'm
aware of us building upon, the simplest fix is just to remove $SHELL.
With these two changes the dash check can be removed and we can allow
builds with dash as /bin/sh
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Note: I know I need to add the description of the libtool change above
into the prefix.patch]
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
build_extension() in setup.py, as part of the build process, does an
'import check' on the built extension. The import check in turn
dlopen()'s the shared library associated with the extension, which
isn't something that makes sense if that library was cross-compiled
for a different architecture.
This was noticed with an x86_64 target that was compiled with avx
support, because it caused 'illegal instruction' exceptions:
| /bin/sh: line 1: 14575 Illegal instruction ... -E ./setup.py -q build
For other target architectures, it doesn't necessarily cause illegal
instruction exceptions, but still fails. For example, on arm, the
failure pathway causes this warning:
*** WARNING: renaming "cmath" since importing it failed: .../cmath.so:
wrong ELF class: ELFCLASS32
This patch to setup.py and the associated recipe changes allow the
whole 'import check' logic to be skipped when cross-compiling.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This adds a new feature, PSEUDO_UNLOAD, which can be used to eliminate
overhead of LD_PRELOAD when no longer necessary.
Also the, clone(2), support on Linux has been updated to resolve some
potential defects in the previous implementation.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
* move 2to3 to separate package and include lib2to3 (was in python-misc)
* fix pattern for python-unittest (was in python-misc because it's in subdirectory now)
* add pydoc_data to python-pydoc (was in python-misc)
* add more stuff to smtpd, audio, codecs, ctypes, html, io, json, mime,
pickle, stringold, xmlrpc
* move all FILES_ details from python recipe to manifest generator so it's in one place
* added manual line break in FILES_${PN}-core, because git send-email
doesn't like too long lines
$ git send-email -1 dfaae65839f0ab23e5b2ae2a68df0f370bca84d2
fatal: /tmp/k8zbDajUNP/0001-python-improve-packaging.patch: 64: patch contains a line longer than 998 characters
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
a set of pre built m4 macros
When analysing our build performance, its apparent that binutils-cross
takes an age to get built. This is due to its dependencies on
flex-native and bison-native which in turn depend on gettext-native.
gettext-native is problematic as it has a significant dependency chain
of its own and takes an age to build. What is worse is that we never
care about the native language support in -native and -cross packages
since we always force the C locale.
This patch therefore disables nls for all -native packages (its already
disabled for -cross) and adds a new gettext-minimal-native package which
contains the m4 macros to keep autoconf/automake happy.
This means we gain a significant build time speedup by the removal of
gettext-native from most dependency chains (only being part of gettext
for the target now).
For now the LICENCE field says GPLv3, the macros are actually under a
FSF MIT like licence so we need to update this part of the patch in due
course.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
mke2fs.conf, which contains defaults for filesystem formatting options,
ought to be shipped along with mke2fs itself.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
host or native libpython instead of target
* -L. is needed to find right libpython
* -L${STAGING_LIBDIR} is needed ie for python-zlib to find right zlib
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
script: add needed files into the python-core package
regenerate python-2.7-manifest.inc file with newer script
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
* it needs to be regenerated to actually package something
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Rebased these patches to the newer code
modified: python-native/nohostlibs.patch
modified: python/01-use-proper-tools-for-cross-build.patch
modified: python/06-avoid_usr_lib_termcap_path_in_linking.patch
modified: python/06-ctypes-libffi-fix-configure.patch
modified: python/multilib.patch
Deleted these patches are the are now upstream
deleted: python/02-remove-test-for-cross.patch
deleted: python/security_issue_2254_fix.patch
Added this patch to python-native
new file: python-native/multilib.patch
Updated site config file for python
modified: ../../site/common-linux : add ac_cv_have_long_long_format for python
avoid this error in python:
Include/pyport.h:243:13: error: #error "This platform's pyconfig.h needs to define PY_FORMAT_LONG_LONG"
Updated default python version
modified: ../../conf/distro/include/default-versions.inc
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Got errors that we were unable to find -lreadline, this fixed the
issue
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
Koen Kooi
Wenzong Fan
Saul Wold
Nitin A Kamble
Matthew McClintock
Julian Pidancet
Khem Raj
Dexuan Cui
Mei Lei
Scott Garman
Richard Purdie
Michael Brown
Martin Jansa
Jan Luebbe
Mark Hatle
Tom Zanussi
Paul Eggleton