| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Update dependencies for perl modules again. When only install
perl-module-file-glob, run perl script with "require File::Glob;" will
fail. Update dependencies to fix that.
[Yocto 3069]
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the RDEPENDS for nativesdk because the nativesdk-automake also
needs perl modules.
Add dependencies perl-module-thread-queue and perl-module-threads.
Remove redundant dependencies that they are already required by autoconf
and autoconf is required by automake.
In this removed list, "-->" present "required by":
perl-module-cwd --> perl-module-file-path --> autoconf
perl-module-dynaloader --> perl-module-xsloader --> perl-module-fcntl
--> perl-module-file-stat --> autoconf
perl-module-exporter-heavy --> perl-module-exporter --> autoconf
perl-module-constant --> autoconf
perl-module-errno --> autoconf
perl-module-file-basename --> autoconf
perl-module-file-compare --> autoconf
perl-module-file-copy --> autoconf
perl-module-file-glob --> autoconf
perl-module-file-spec-unix --> perl-module-file-spec
--> perl-module-io-file --> autoconf
perl-module-file-stat --> autoconf
perl-module-getopt-long --> autoconf
perl-module-io --> perl-module-IO-handle --> perl-module-IO-seekable
--> perl-module-io-file --> autoconf
perl-module-io-file --> autoconf
perl-module-posix --> autoconf
Bump up PR.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update autoconf runtime dependencies on perl and perl modules. And
remove RDEPENDS for nativesdk because the nativesdk-autoconf has same
dependencies with autoconf.
Then fixes autoreconf runs failed both on target and toolchain.
Bump up PR.
[Yocto 3100]
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Run autoreconf fails because it uses several perl modules and they
requires other perl modules. So update these dependencies for:
perl-module-exporter
perl-module-file-glob
perl-module-file-path
perl-module-file-spec
perl-module-file-stat
perl-module-io-file
perl-module-io-handle
perl-module-io-seekable
perl-module-posix
And RDEPENDS rules in file perl-rdepends_5.14.2.inc don't work for
nativesdk perl module packages. Replace all "perl" with "${PN}" in the
file to fix that.
In nativesdk.bbclass it calls
oe.classextend.NativesdkClassExtender().map_packagevars() to map package
vars include var RDEPENDS. In map_packagevars():
for pkg in (self.d.getVar("PACKAGES", True).split() + [""]):
the value of var "PACKAGES" may not be calculated correctly, so for
all the nativesdk packages created by
PACKAGES_DYNAMIC_virtclass-nativesdk += "^nativesdk-perl-module-.*"
dependencies are wrong.
This is similar with 51cbb5ae76a22d465e2f6c5ef923ec2682624e3b.
Bump up PR.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Every package provides itself. While printing package information all
fields are printed only if there is any relevant info for them. For
example: a package with no "Replaces" won't get this printed at all.
Packages which provide only themselves, were printing this field but with
no values. This patch skips this field if the package provides only
itself.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While removing a package with opkg, the process shouldn't be blocked if
another package RECOMMENDS the package wanted to be removed. This is
because, while generating the dependencies, opkg adds dependencies to
depended_upon_by even if dependency's type is RECOMMEND. The fix is to
skip dependencies of type RECOMMEND while constructing depended_upon_by.
[YOCTO: #2431]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the move of the strict/vars/config/warnings modules to the main perl
recipe, we need to RPROVIDE those modules to ensure that package dependencies
on those modules continue to work correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* to keep ${PN}-locale from
bitbake.conf:PACKAGES_DYNAMIC = "^${PN}-locale-.*"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* bitbake uses PACKAGES_DYNAMIC as regexp
^ could make matching faster (and it will be more clear that we're expecting regexp not glob)
* made all those last '-' optional, use .* (or nothing)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch fixes 2 problems.
The first one is that when run "perl -V" on target, it fails with lack
of some .pm files. So add these perl module files to package perl itself
to fix this failure.
The second problem is that package nativesdk-perl-modules doesn't depends
on the single perl modules.
In the .bb file, dependencies of perl-modules are set by:
RRECOMMENDS_perl-modules = "${@d.getVar('PACKAGES', True)...}"
The PACKAGES would be reset by do_split_packages since:
PACKAGES_DYNAMIC = "perl-module-*"
PACKAGES_DYNAMIC_virtclass-nativesdk = "nativesdk-perl-module-*"
Then:
1) The target perl-modules RRECOMMENDS on perl-module-*, this is what
we expect.
2) But the nativesdk-perl-modules doesn't RRECOMMENDS on
nativesdk-perl-module-*, this is not what we expect.
The value of PACKAGES after do_split_packages has been set correctly (it
contains the nativesdk-perl-module-* packages)
But the:
RRECOMMENDS_perl-modules = "${@d.getVar('PACKAGES', True)...}"
doesn't work correctly for nativesdk, the
d.getVar('RRECOMMENDS_perl-modules', True)
doesn't get the new value of the PACKAGES, it gets the value of PACKAGES
before the do_split_packages.
This patch will fix the problem.
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allow the relocation of libexecdir to be done correctly
for the qemu-brigde-helper.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This address the following when libexecdir is not set to /usr/libexec
WARNING: QA Issue: qemu: Files/directories were installed but not shipped
/usr/libexec
/usr/libexec/qemu-bridge-helper
/usr/libexec/.debug
/usr/libexec/.debug/qemu-bridge-helper
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Evade Flow <evadeflow@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Evade Flow <evadeflow@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Commit 9c9ea24b115a9bb87df1323b5f185ce426262aec made strace depend on perl because the
strace-graph script needs it. However, this cost of the dependency is large (building
all of perl) and the value of the script is marginal. Let's just delete the script
instead and remove the dependency again.
If anybody wants strace-graph then it should be packaged in its own recipe and that one
can be made to depend on perl without disrupting the main strace package.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If you:
bitbake sed-native
bitbake libtool-cross
then libtool-cross has SED="/path/to/sysroot/sed" which is incorrect. If that
is reused from sstate or sed-native is cleaned, the build will fail.
This patch simply sets sed to be "sed" since we're not on systems where
the sed from PATH is broken.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This line causes pkgconfig-dev to replace pkgconfig so the package with all the files
in is replaced by one with no files. This makes no sense and hence we should just
remove this broken line.
At this point in the release, this is the safest way to fix this even if an empty -dev
package is left available.
[YOCTO #2878]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
perl.c uses an ARCHLIB_EXP define to generate compile-time code that
adds the archlibexp path to @INC during run-time initialization of a
new perl interpreter.
Because we've changed this value in a temporary way to make it
possible to use ExtUtils::Embed in the target build (the temporary
value in config.sh gets re-stripped out during packaging), the
ARCHLIB_EXP value that gets generated still uses the temporary version
instead of the original expected version (i.e. becauses it's in the
generated config.h, it doesn't get stripped out during packaging like
the others in config.sh).
This creates an unmodified version called archlib_exp that gets used
by a modified config_h.SH to get the correct value into config.h
This patch uses an unmodified version of archlibexp called
archlib_exp, introduced to config.sh, which is used to generate the
correct value of ARCHLIB_EXP into config.h
Fixes [YOCTO #3099].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was a problem in commit ad23395cd1f6c0cbfcc6980b6071d589f9f6cde0 since
gettext-nativesdk was translated to gettext instead of nativesdk-gettext.
This fixes to use the correct dependency.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If qemu-mips was disabled as done in some distros, this wrapper would fail.
Therefore check if the file exists before wrapping it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "*:/".
Assuming default behaviour ('no_subtree_check').
NOTE: this default has changed since nfs-utils version 1.0.x
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We were mistakenly writing what was meant to go to stderr into the
output file, so when the "Multiple matches" error showed we weren't
actually seeing the matches printed.
Also change the wording of the "Unable to find package..." to "Unable
to resolve package..." instead so that it makes more sense if it is
printed after the "Multiple matches" error.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu-mips user emulation binary segfaults when running any kind of
binary. This is due to a MMU access fault in the virtual CPU. This
problem has been introduced in qemu when 4GB of vmem were reserved for
32-on-64 bit.
This workaround will need to be reverted once the proper fix is found.
[YOCTO #3143]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This binary is provided by util-linux nowadays. Fixes:
WARNING: The recipe is trying to install files into a shared area when those files already exist. Those files are:
/fast/jenkins/workspace/.../tmp-eglibc/sysroots/x86_64-linux/sbin/findfs
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
binutils will build differently if this feature is enabled, so
make the do_configure step depend on it
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
native specific directory
chrpath is assumed to be provided by the build host system. This means
we need to provide a replacement version and install into a specific directory
to avoid races.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This converts the option to maintain the existing behaviour unless the option is
specified. We do specify the option during the builds themselves to ensure what
the users expects is built.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All variants of opkg are currently configured --disable-curl so there
seems no point in depending on it.
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Even when installing onto a live target system, calling sync() during
package installation is of somewhat questionable benefit. But calling
it on the build host during rootfs construction is certainly useless and
can cause I/O to stall for several seconds on even a moderately sized
host which is clearly not desirable.
(From a patch originally by Mike Crowe.)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* http://code.google.com/p/opkg/issues/detail?id=94
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In certain cases with BerkleyDB 5.3.x we are getting the error:
db3.c:1443: dbcursor->pget(-30999): BDB0063 DB_BUFFER_SMALL: User memory too small fo
See https://bugs.launchpad.net/rpm/+bug/934420 for more information.
It appears to be some type of a bug in the BerkleyDB 5.3.x. In an attempt
to workaround the problem, when we encounter this situation we attempt
to adjust the size of the mmap buffer until the call works, or we
end up trying 10 times. The new size is either the updated vp->size
from the failed pget call, or the previous size + 1024.
If DBI debugging is enabled, additional diagnostics are printed, otherwise
a basic retry and success message is added to show that the failure was
resolved.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove the optimzation append from recipe and add the patch that is in the rpm
cvs repo, http://www.mail-archive.com/rpm-cvs@rpm5.org/msg08907.html. The -O2
optimzation append is removed since it can limit debugging options that are
provided when -O0 is used.
This was tested by setting: SELECTED_OPTIMIZATION = "-O0"
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is an issue that is caused when doing the install step of rpm on systems
with high parallelization where two jobs of make will fight for the same file
while installing the sub-directory lua. This is caused by the same makefile rule
being called twice in a way that both could be trying to install at the same
time.
This fix renames the linking rule so it will always be run after the needed
files are added and removed it's dependency so the required rule would only
run once.
This was tested heavily using ppss to run mutliple installs in parallel. This
wouldn't happen in practise but it was tested will all the individual rules as
well.
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When attempting to build with uuid and all tests compiling will error because
uuid.h doesn't exist in the rpm tarball. Fix this by changing the include to
use the one in ossp which solves the issue.
The recipe already depends on ossp so ossp/uuid.h will be there when rpm-native
is built.
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're going around in circles trying to fix the sed expressions and making one case
work and others not work. This patch fixes the base configuration file so we have
non-overlapping substitutions. I've tried to significantly clean up various problems
that were occurring once and for all.
This will hopefully resolve all the issues people have been seeing with incorrect perl
paths.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It is needed in some SDKs that we ship own
version of lex/yacc for sdk host
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Nothing should ever be poking files directly into the staging/sysroot
directories, it should always go through ${D}.
This patch ensures this recipe does this and hence fixes various
potential build issues such as lack of sstate tracking of files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Commit 38234f2e276356b1d77a87ceabc486107e336d19 tried to fix the sed
expressions by anchoring the left side of the search regexp to prevent
$prefix$prefix type expression in the perl config. For nativesdk this is
not enough. Adding anchors on both side fixes this.
Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The LICENSE for ossp-uuid is MIT. As well, the LIC_FILES_CHKSUM
was missing the license text within uuid_md5.c
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows BSPs for architectures with no thread support to set (for
example) "GCCTHREADS=no" without having to override all the other configure
parameters.
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When doing multilib builds rpm does not find libgcc1 for lib32
multilib because its not honoring the debian renaming scheme for
libgcc-multilib. Lets add MLPREFIX to fix it.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This solves a problem when installing rpm using the ipk pkg-management
system where /var/cache was conflicting with the existing /var/cache from
base-files.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Ross Burton
Robert Yang
Kang Kai
Martin Jansa
Andrei Gherzan
Richard Purdie
Saul Wold
Evade Flow
Marcin Juszkiewicz
Phil Blundell
Tom Zanussi
Paul Eggleton
Laurentiu Palcu
Matthew McClintock
Mark Hatle
Khem Raj
Christian Glindkamp
Elizabeth Flanagan