Age | Commit message (Collapse) | Author |
|
When building for powerpc 32bit with musl following error triggered
from do_configure:
checking for the platform triplet based on compiler characteristics... powerpc-linux-gnu
configure: error: internal configure error for the platform triplet, please file a bug report
This is caused by PLATFORM_TRIPLET != MULTIARCH mismatch since MULTIARCH
in case of musl is powerpc-linux-musl. Since triplet is used as part
module name as described in PEP-3149 to make fix less intrusive alias
powerpc-linux-musl to powerpc-linux-gnu to avoid possible runtime
(e.g. tests) incompatibilities later.
Fix was inspired by commit cda0ef61d373 ("python3: fix do_configure
check platform triplet error").
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
new manifest
When creating a new python2 manifest, there is a corner case on which
the filepath for a certain dependency that was found, could contain
the path of an existing folder, e.g. ${libdir}/python2.7/xmlrpclib.py
module path contains ${libdir}/python2.7/xml, this causes an issue where
the dependency doesnt get eventually added on FILES for that module.
This patch checks if the dependency that was found is a directory, if it
is, it checks if it matches one of the existing directories on the
manifest, if it is not, then it checks if the dependency's path (without
the filename) matches one of the directories.
Also some misc indentation fixes.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
new manifest
When creating a new python3 manifest, there is a corner case on which
the filepath for a certain dependency that was found, could contain
the path of an existing folder, e.g. ${libdir}/python3/xmlrpclib.py
module path contains ${libdir}/python3/xml, this causes an issue where
the dependency doesnt get eventually added on FILES for that module.
This patch checks if the dependency that was found is a directory, if it
is, it checks if it matches one of the existing directories on the
manifest, if it is not, then it checks if the dependency's path (without
the filename) matches one of the directories.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch altered the clean target's behaviour to skip the ipkg-install
directory. However this directory isn't created by opkg, opkg-utils, or the
package_ipk class; and we don't invoke the clean target as we perform
out-of-tree builds.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We stop distutils for *native* Python from rewriting hashbangs when installing
(so installed scripts don't have a hashbang that refers to sysroot paths), but
this isn't needed nor desirable for the *target* Python.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While there is a bit of documentation regarding building a new
manifest file for python, it seems that users usually only read
the manifest file.
The manifest file is in JSON format which doesn't allow comments,
hence why instructions were initially put elsewhere.
This patch hacks the call to open the JSON manifest file by using a
marker to trick it into reading only part of the file as the manifest
itself, and keep the other part as comments, which contain instructions
for the user to run the create_manifest task after an upgrade or
when adding a new package.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
While there is a bit of documentation regarding building a new
manifest file for python, it seems that users usually only read
the manifest file.
The manifest file is in JSON format which doesn't allow comments,
hence why instructions were initially put elsewhere.
This patch hacks the call to open the JSON manifest file by using a
marker to trick it into reading only part of the file as the manifest
itself, and keep the other part as comments, which contain instructions
for the user to run the create_manifest task after an upgrade or when
adding a new package.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support to enable tk via PACKGECONFIG.
before the patch:
# python
Python 2.7.15 (default, Nov 8 2018, 04:53:50)
[GCC 8.2.0] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import Tkinter
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib64/python2.7/lib-tk/Tkinter.py", line 39, in <module>
import _tkinter # If this fails your Python may not be configured for Tk
ImportError: No module named _tkinter
>>>
After the patch, if enable tk in PACKGECONFIG, then
# python
Python 2.7.15 (default, Oct 25 2018, 08:12:45)
[GCC 8.2.0] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import Tkinter
>>>
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support to enable tk via PACKAGECONFIG.
before this patch:
# python3
Python 3.5.6 (default, Nov 8 2018, 04:53:45)
[GCC 8.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import tkinter
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib64/python3.5/tkinter/__init__.py", line 35, in <module>
import _tkinter # If this fails your Python may not be configured for Tk
ImportError: No module named '_tkinter'
>>>
After this patch, if enable tk in PACKAGECONFIG, then
# python3
Python 3.5.6 (default, Nov 8 2018, 03:15:52)
[GCC 8.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import tkinter
>>>
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use 4 spaces to replace a tab.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Pyvenv is just a small script that uses venv to create virtual
environments.
https://www.python.org/dev/peps/pep-0405/#creating-virtual-environments
This patch adds the python3-venv module as a self-contained package which
python3-pyvenv must depend on at run-time.
The patch also provides the package python3-pyvenv from the pyhton3-venv
package.This is good for future-proofing since python3-pyvenv has been
deprecated and only python3-venv is now available in Python 3.6.
https://docs.python.org/3/library/venv.html.
Without this patch python3-pyvenv is broken because it is missing the
venv module at run-time. This patch specifies the newly created
python3-venv as a run-time dependency of python3-pyvenv.
Signed-off-by: Hugues Kamba <hugues.kamba@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport patch to fix the following CVE.
CVE: CVE-2018-14647
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport a patch to fix the following CVE.
CVE: CVE-2018-1000802
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Nothing should be in this package, so remove it entirely to be sure nothing does
end up in there.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want to allow the main recipe to extend RDEPENDS directly, so don't wipe
RDEPENDS when reading the manifest.
This fixes the missing python-misc dependency from python-modules.
As the wiping was having the good side-effect of removing the PN-dev dependency
on PN (which doesn't exist), clear RDEPENDS_${PN}-dev.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Copy the Python 2 run-ptest script to execute the Python 3 test suite.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
commit c5629268b0f8ae0a425c98337d13e8dc83107e13:
[
python: set PYTHONHOME for nativesdk
This ensures that the nativesdk python functions correctly without needing to
set PYTHONHOME in the sdk environment setup script.
]
it's also needed for python3.
Signed-off-by: Cheuk Wing Leung <cwleung@kth.se>
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python uses AC_RUN_IFELSE to determine the byte order for floats and doubles,
and falls back onto "I don't know" if it can't run code. This results in
crippled floating point numbers in Python, and the regression tests fail.
Instead of running code, take a macro from autoconf-archive which compiles C
with a special double in which has an ASCII representation, and then greps the
binary to identify the format.
This is essentially a backport of the Python 3 patch in oe-core 1781b87.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As the manifest handling is done differently now, just inherit ptest with the
other inherits.
test_shutil needs unzip so add to RDEPENDS.
Instead of using a patched Makefile, call test.regrtest directly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's likely that the certificate root chain is needed if python3-crypt is
installed, so recommend it.
Also remove the redundant nativesdk-python3-crypt assignment, as the general
form is sufficient when class-extended.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport two and pick some other in-review patches from Ubuntu to fix
ssl test failures because of OpenSSL 1.1.x changes.
Fixes [YOCTO #12788]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The module was accidentally included in python-misc.
Also re-run create_manifest to update the dependencies of python-sqlite3,
causing some whitespace changes.
[ YOCTO #12933 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We manually maintain the tests package's content and dependencies, so mark is as
special (matching create_manifest3.py).
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sqlite3/__init__.py was accidentally included in python3-misc.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This package doesn't exist anymore so the manifest tool doesn't need to handle
it specially.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently the bulk of the tests in python3-tests, some more in
python3-sqlite3-tests, and others in their parent module (such as
python3-ctypes). This is pointless space usage if we're not planning on running
the tests, so consolidate all the tests into python3-tests.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Don't sort the manifest when using it to generate packaging rules, so ordering
can be used to have complex packaging rules.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of sorting the entire manifest when it is updated, use OrderedDict to
preserve the order of fields. This means that packages can be ordered in the
manifest to allow non-trivial FILES assignments (such as a package that picks up
pieces of other packages)
The manifest has been regenerated with the new stable ordering, and
distutils-staticdev moved above distutils so the packaging rules work as
expected.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently the bulk of the tests in python-tests, some more in
python-sqlite3-tests, and others in their parent module (such as
python-ctypes). This is pointless space usage if we're not planning on
running the tests, so consolidate all the tests into python-tests.
This is a backport of the same changes done by Ross Burton for python3
Changes since v1:
- Rebase
Signed-off-by: Andrew Geissler <geissonator@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Don't sort the manifest when using it to generate packaging rules, so
ordering can be used to have complex packaging rules.
This is a backport of the same changes done by Ross Burton for python3
Changes since v1:
- Rebase
Signed-off-by: Andrew Geissler <geissonator@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of sorting the entire manifest when it is updated, use
OrderedDict to preserve the order of fields.This means that
packages can be ordered in the manifest to allow non-trivial
FILES assignments (such as a package that picks up pieces of
other packages)
The manifest has been regenerated with the new stable ordering, and
distutils-staticdev moved above distutils so the packaging rules work as
expected.
This is a backport of the same changes done by Ross Burton for python3
Changes since v1:
- Moved distutils-staticdev above distutils so packaging rules work
as expected.
Changes since v2:
- Rebase
Signed-off-by: Andrew Geissler <geissonator@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Due to human error an older revision of the SSL patch was merged.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use variables instead of hard-coding to remove another variation between
releases.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of forcibly disabling Bluetooth (support for Bluetooth sockets in the
socket module), add a PACKAGECONFIG. The default remains disabled for
consistency.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For target Python we use the libffi that we build, so we don't need to
autoreconf the in-tree libffi.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
_PYTHON_PROJECT_BASE and _PYTHON_PROJECT_SRC appear to be set in setup.py from
the source directory and build directory correctly, so this is redundant.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of including the Py2 python.inc and having to undo some of the
assignments, create a new python3.inc to hold the common configuration.
Over time we can move more from the recipes into this file to unify the target
and native recipes.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Backport changes from 3.7/3.6 to fix failing python3 ssl test suite.
Fixes [YOCTO #12919]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
Includes changes:
76aa2c0a9a bpo-33216: Clarify the documentation for CALL_FUNCTION_* (#8338)
1b141b9553 Doc: Backport language switcher (bpo-33700, bpo-31045) (#8048)
f381cfe07d [3.5] bpo-33001: Prevent buffer overrun in os.symlink (GH-5989) (#5991)
937ac1fe06 [3.5] bpo-32981: Fix catastrophic backtracking vulns (GH-5955) (#6034)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
|
|
glibc 2.28 slightly changed the behaviour of sigaddset() which broke
multiprocessing. Backport a patch from Python 3.6 to solve this.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch dates back to the addition of the Python 3 recipe to oe-core, and as
listxattr is never added to supports_follow_symlinks the extended attribute
support will never be enabled.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
None of the Python invocations that this changes are actually called, and
there's no need to provide a HOSTPGEN variable when the recipe can just override
PGEN directly.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With OpenSSL 1.1.x TLS 1.3 can be used, so backport a patch from Python 3.6 to
fix the ftplib unit test.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
PyBench takes a long time to run, also upstream have removed it from Python and
instead use test.regrtest —pgo to profile the interpreter.
The results are good: not only does Python compile faster (~300s vs ~600s on my
machine) but Phoronix’s PyBench test runs in 2130ms compared to 2229ms when
using PyBench to train (and 2345ms with PGO disabled).
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python uses AC_RUN_IFELSE to determine the byte order for floats and doubles,
and falls back onto "I don't know" if it can't run code. This results in
crippled floating point numbers in Python, and the regression tests fail.
Instead of running code, take a macro from autoconf-archive which compiles C
with a special double in which has an ASCII representation, and then greps the
binary to identify the format.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|