aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-devtools/perl
AgeCommit message (Collapse)Author
2014-11-25perl: fix PERL5LIB settingsWolfgang Denk
The PERL5LIB settings in the perl wrapper script did not include the "site_perl" or "vendor_perl" directories, which caused some errors. See https://bugzilla.yoctoproject.org/show_bug.cgi?id=6890 Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-11-09perl: set the perl libraries search pathJackie Huang
The default value for this is ../../lib which ends up with something like: | ./sysroots/x86_64-linux/usr/bin/perl-native/perl5.20.0.real \ | "-I../../lib" "-I../../lib" "-MExtUtils::Command::MM" -e pod2man \ | "--" --section=0 --perm_rw=644 perldoc.pod blib/man1/perldoc.1 in this case, nativeperl will find libraries from the target build, When using an x86-64 host to target Haswell, you can end up with ../../lib including precompiled modules which use Haswell instructions, it fails with: | Running pm_to_blib for dist/if directly | Skip ../../lib/if.pm (unchanged) | Makefile:457: recipe for target 'manifypods' failed | make[1]: *** [manifypods] Illegal instruction So set it to use the -native ones instead of those from the target build. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2014-11-08perl: Enable rebuilds to account for configuration changesRichard Purdie
If configure/compile was rerun for perl, changes such as libdir changes were not being picked up. To fix this we we add "make clean" functionality, if the makefile is present. We also in this case need to delete the .so file, else some perl modules try and load the target arch libraries leading to build failures. I'd love it if there were a better way to do this and am open to better proposals but this was the best I could find, not being a perl expert. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-11-06perl: Fix bug when installs SDK in custom directoryAníbal Limón
Add site_perl and vendor_perl directories in create_wrapper this fix bug when searching for libraries in these directories. [YOCTO #6890] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-30perl: Improve sysroot regexpRichard Purdie
When rebuilding libxml-parser-perl with a change to libdir, you see strange build failures due to MakerMake looking in strange library paths. The error is obtuse and hard to track down. I'm therefore proposing we change the regexp once and for all to resolve the issue. Currently it only does a replacement once, this change ensures it always gets set the correct value upon rebuilds. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-09-22perl: remove unneeded patches in ptest directoryChong Lu
The perl patches have been copied to ptest directory and these patches in target rootfs are linked to build dir. The ptest of perl doesn't need these patches, so remove them from target. Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
2014-09-01perl: add explicit configs for Time-HiResJackie Huang
The compilation of Time-HiRes tries to compile and run the testing program but definitely fails since we are cross compiling: Looking for clock_gettime()... ./tmp26733: ./tmp26733: cannot execute binary file Looking for clock_getres()... ./tmp26733: ./tmp26733: cannot execute binary file so add explicit configs to avoid the auto detecting. Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-28perl-native: fixed bad interpreter errorRobert Yang
We may get the error on some hosts when build in deeper dir: /bin/sh: /path/to/tmp/sysroots/i686-linux/usr/bin/perl-native/pod2man: /path/to/tmp/sysroots/i686-li: bad interpreter: No such file or directory Note the "i686-li", it should be "i686-linux", but is truncated by the host. We can use "/usr/bin/env nativeperl" as we have done in cpan.bbclass for other recipe's perl script to fix the problem. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-23perl: fix the output format of all testsChong Lu
We should use "PASS:|FAIL:|SKIP: testname" to output results of ptest. Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-11perl-rdepends: add CPAN, CPAN::Meta requirementsTim Orling
While testing libmodule-build-tiny-perl, it was discovered that perl-module-cpan is missing some RDEPENDS. * Run "perl -mCPAN::Meta" on a target, the following is missing: -- perl-module-parse-cpan-meta (Parse::CPAN::Meta) * Run "perl -mCPAN" on a target, the following (and others) are missing: -- perl-module-file-glob (File::Glob) -- perl-module-config-git (Config_git) * Also added missing modules from runtime-requires in https://metacpan.org/source/ANDK/CPAN-2.05/META.json This patch adds them to perl-rdepends for ${PN}-module-cpan Signed-off-by: Tim Orling <TicoTimo@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-07-25perl: fix rebuid failed while ${CC} changedHongxu Jia
Reproduce steps: 1) bitbake perl 2) vim local.conf to tweak CC, just add redundant option. ... CC_append = " ${HOST_CC_ARCH}" ... 3) bitbake perl ... ./miniperl -Ilib make_ext.pl lib/auto/Time/HiRes/HiRes.so MAKE=make LIBPERL_A=libperl.so LINKTYPE=dynamic Making Time::HiRes (all)my $filename= Deleting non-Cross makefile Running Makefile.PL in cpan/Time-HiRes Makefile.PL: The "xdefine" exists, skipping the configure step. ("tmp/sysroots/x86_64-linux/usr/bin/perl-native/perl5.20.0.real Makefile.PL --configure" to force the configure step) Warning: No Makefile! make[2]: Entering directory `tmp/work/armv5te-poky-linux-gnueabi/perl/5.20.0-r1/perl-5.20.0/cpan/Time-HiRes' make[2]: *** No rule to make target `config'. Stop. ... While ${CC} changed, the existance of 'xdefine' caused makefile regeneration failed. [YOCTO #6569] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-16perl-rdepends: Add perl as perl-misc/${PN}-pod runtime depHongxu Jia
Each of the items requires perl, but had not previously stated their perl dependency. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com> Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-08perl, perl-native, perl-ptest: upgrade from 5.14.3 to 5.20.0Hongxu Jia
Changed: - The Copying has no change, except the company address. - pick patches from debian http://ftp.de.debian.org/debian/pool/main/p/perl/perl_5.20.0-1.debian.tar.xz - Not used by oe: deprecate-with-apt.diff patchlevel.diff fakeroot.diff - Create/Update perl-rdepends_${PV}.inc by the hardcode script; - Update config.sh by: 1) Copy the Perl 5.20.0 source code onto your TARGET machine linux qemuarm 3.14.5-yocto-standard from OE-Core rev: f506d0660c9949485268a92724ac770b5457b0ca 2) Execute sh Configure as normal and configure as required, do not "make"; 3) Compare with the old config.sh files, and update; - perl-ptest.inc 1) Copy the souce code to ptest since almost 112 test cases failed with the reason that no souce code found; 2) Add two patches to fix test case issue; - perl-native Reference perl (5.20.0-1) in debian to update perl shared library headers https://packages.debian.org/experimental/i386/perl/filelist Obsolete: - 09_fix_installperl.patch The dead code was removed from installperl http://perl5.git.perl.org/perl.git/commit/236818e0b9d9fe874831086b4d0b94dc6f245dfd - perl-build-in-t-dir.patch The upstream has fix it. The issue description: Perl cannot cross build in a path containing a directory that has the name of "t". As an example, you can make the perl build fail with "mkdir -p /tmp/build/t", go to the directory, unpack the sources, configure and cross build. - 0001-Fix-misparsing-of-maketext-strings.patch as they are part of the upstream code now: http://perl5.git.perl.org/perl.git/commit/1735f6f53ca19f99c6e9e39496c486af323ba6a8 - 0001-Prevent-premature-hsplit-calls-and-only-trigger-REHA.patch the hash function changed: http://perl5.git.perl.org/perl.git/commit/7dc8663964c66a698d31bbdc8e8abed69bddeec3 Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-03libxml-parser-perl: fix do_compile failed with unrecognized option '-Wl, -O1'Hongxu Jia
Use '${CCLD}' as '${LD}' which the cpan was doing. ... i586-poky-linux-ld: unrecognized option '-Wl,-O1' i586-poky-linux-ld: use the --help option for usage information ... Also fix do_configure warnings ... '--SYSROOT' is not a known MakeMaker parameter name. '-MARCH' is not a known MakeMaker parameter name. ... Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-23perl: stop perl-modules recommending perl-ptestRoss Burton
Change the logic that generates the perl-modules recommends to be an include filter instead of an exclude filter, so that new sub-packages don't become dependants of perl-modules (such as perl-ptest). [ YOCTO #6203 ] Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-23perl: fix for CVE-2010-4777yanjun.zhu
The Perl_reg_numbered_buff_fetch function in Perl 5.10.0, 5.12.0, 5.14.0, and other versions, when running with debugging enabled, allows context-dependent attackers to cause a denial of service (assertion failure and application exit) via crafted input that is not properly handled when using certain regular expressions, as demonstrated by causing SpamAssassin and OCSInventory to crash. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2010-4777 Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-08perl: update ptest package dependency listMaxin B. John
Add "sed" in the ptest runtime package dependency list [YOCTO #6260] Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-05-08perl: fix missing Module::MetadataTim Orling
Module::Build depends on Module::Metadata (since perl 5.13.9). Module::Metainfo is only a wrapper for Module::Metadata. See discussion in http://patches.openembedded.org/patch/66233/ Signed-off-by: Tim Orling <TicoTimo@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-04-25Globally replace 'base_contains' calls with 'bb.utils.contains'Otavio Salvador
The base_contains is kept as a compatibility method and we ought to not use it in OE-Core so we can remove it from base metadata in future. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-25Globally replace oe.utils.contains to bb.utils.containsOtavio Salvador
BitBake has the exact same code as oe.utils.contains so there's no reason to duplicate it. We now rely on the bb.utils.contains code for metadata. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-04-24liberror-perl: add 0.17022Koen Kooi
This is needed for git-perltools to work: koen@beast:/build/v2014.06/sources/meta-openembedded$ git send-email -M -1 --to openembedded-devel@lists.openembedded.org --subject-prefix=meta-oe][PATCH Can't locate Error.pm in @INC (@INC contains: /usr/lib/perl/5.14.3 /etc/perl /usr/lib/perl/site_perl/5.14.3/ /usr/lib/perl/site_perl/5.14.3 /usr/lib/perl/vendor_perl/5.14.3/ /usr/lib/perl/vendor_perl/5.14.3 /usr/lib/perl/5.14.3/ /usr/local/lib/site_perl .) at /usr/lib/git/git-core/git-send-email line 30. Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-25perl-native: fix path in Config.sh for sstateRobert Yang
We need fix the path in *.pm, *.pod, *.h, *.pl and *.sh as we have done for target perl. [YOCTO #6035] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-02-20recipes: convert remaining SUMMARY/DESCRIPTION cosmetic issues (part 2)Matthieu Crapet
Completes previous commit b5292d4115a4555a66b5e35acdc67dd71fb8577f. Updates SUMMARY[doc] (meta/conf/documentation.conf). Changes: - rename DESCRIPTION with length < 80 to (non present tag) SUMMARY - drop final point character at the end of SUMMARY string - remove trailing whitespace of SUMMARY line Note: don't bump PR Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2014-01-02Tweak SUMMARYPaul Eggleton
For these recipes, I took the opportunity to fix up the new SUMMARY values as the originals needed tweaking. I've tried to make them concisely explain the function of the recipe / package where possible. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-01-02Add missing SUMMARY valuesPaul Eggleton
These recipes all had a long DESCRIPTION but no SUMMARY; since the SUMMARY is often displayed alone by package managers and the default value ("${PN} version ${PV}") isn't particularly useful, we should always try to set SUMMARY. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2014-01-02Replace one-line DESCRIPTION with SUMMARYPaul Eggleton
A lot of our recipes had short one-line DESCRIPTION values and no SUMMARY value set. In this case it's much better to just set SUMMARY since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY is at least useful. I also took the opportunity to fix up a lot of the new SUMMARY values, making them concisely explain the function of the recipe / package where possible. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
2013-12-14perl: remove sysroot path leakage into packaged filesKoen Kooi
A grep in $D shows a lot of leakage which breaks things like CPAN: [koen@rrmbp image]$ grep sysroot . -rn | grep -v Binary ./usr/lib/perl/5.14.3/cacheout.pl:50:if (open(PARAM,'/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include/sys/param.h')) { ./usr/lib/perl/5.14.3/CORE/pp.h:53:#undef SP /* Solaris 2.7 i386 has this in /build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include/sys/reg.h */ ./usr/lib/perl/5.14.3/Config.pod:8076:used. Typically F</build/v2013.06/build/tmp>-angstrom_v2013_06-F<eglibc/sysroots/beaglebone/usr/include/string.h> or F</build/v2013.06/build/tmp>-angstrom_v2013_06-F<eglibc/sysroots/beaglebone/usr/include/strings.h>. ./usr/lib/perl/5.14.3/FileCache.pm:119: foreach my $param ( '/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include/sys/param.h' ){ ./usr/lib/perl/5.14.3/Config.pm:87: archlibexp => '/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/lib/perl/5.14.3/', ./usr/lib/perl/5.14.3/Config.pm:89: cc => 'arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone', ./usr/lib/perl/5.14.3/Config.pm:101: full_ar => '/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/x86_64-linux/usr/bin/armv7ahf-vfp-neon-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-ar', ./usr/lib/perl/5.14.3/Config.pm:114: ld => 'arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone', ./usr/lib/perl/5.14.3/Config_heavy.pl:169:archlibexp='/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/lib/perl/5.14.3/' ./usr/lib/perl/5.14.3/Config_heavy.pl:186:cc="arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone" ./usr/lib/perl/5.14.3/Config_heavy.pl:191:ccname="arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone" ./usr/lib/perl/5.14.3/Config_heavy.pl:245:cpprun="arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone -E" ./usr/lib/perl/5.14.3/Config_heavy.pl:246:cppstdin="arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone -E" ./usr/lib/perl/5.14.3/Config_heavy.pl:745:full_ar='/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/x86_64-linux/usr/bin/armv7ahf-vfp-neon-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-ar' ./usr/lib/perl/5.14.3/Config_heavy.pl:927:ld="arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone" ./usr/lib/perl/5.14.3/Config_heavy.pl:1167:strings='/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include/string.h' ./usr/lib/perl/5.14.3/Config_heavy.pl:1177:timeincl='/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include/sys/time.h /build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include/time.h ' ./usr/lib/perl/5.14.3/Config_heavy.pl:1229:usrinc='/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include' ./usr/lib/perl/5.14.3/ExtUtils/Liblist/Kid.pm:58: push(@libpath, "/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/lib"); ./usr/lib/perl/config.sh:56:archlibexp='/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/lib/perl/5.14.3/' ./usr/lib/perl/config.sh:73:cc="arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone" ./usr/lib/perl/config.sh:78:ccname="arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone" ./usr/lib/perl/config.sh:100:cpprun="arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone -E" ./usr/lib/perl/config.sh:101:cppstdin="arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone -E" ./usr/lib/perl/config.sh:591:full_ar='/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/x86_64-linux/usr/bin/armv7ahf-vfp-neon-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-ar' ./usr/lib/perl/config.sh:769:ld="arm-angstrom-linux-gnueabi-gcc -march=armv7-a -marm -mthumb-interwork -mfloat-abi=hard -mfpu=neon --sysroot=/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone" ./usr/lib/perl/config.sh:986:strings='/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include/string.h' ./usr/lib/perl/config.sh:996:timeincl='/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include/sys/time.h /build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include/time.h ' ./usr/lib/perl/config.sh:1042:usrinc='/build/v2013.06/build/tmp-angstrom_v2013_06-eglibc/sysroots/beaglebone/usr/include' Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-10meta/*: remove unnecessary patchesChong Lu
The following patches are found, but not used by any recipe, so we should remove them. meta/recipes-connectivity/avahi/files/fix_for_automake_1.11.2.patch meta/recipes-connectivity/dhcp/dhcp/fix-client-path.patch meta/recipes-connectivity/libnss-mdns/files/alignment-fix.patch meta/recipes-core/dbus/dbus-1.6.10/test-run-path.patch meta/recipes-core/gettext/gettext-0.16.1/fixchicken.patch meta/recipes-core/gettext/gettext-0.16.1/getline.m4.patch meta/recipes-core/systemd/systemd/use-rootlibdir.patch meta/recipes-core/util-linux/util-linux/remove-lscpu.patch meta/recipes-core/util-linux/util-linux/remove_sigsetmark.patch meta/recipes-core/util-linux/util-linux/uclibc-compile.patch meta/recipes-devtools/autoconf/autoconf/autoconf-x.patch meta/recipes-devtools/btrfs-tools/btrfs-tools/btrfs-progs-fix-parallel-build.patch meta/recipes-devtools/btrfs-tools/btrfs-tools/btrfs-progs-fix-parallel-build2.patch meta/recipes-devtools/cdrtools/cdrtools-native/no_usr_src.patch meta/recipes-devtools/elfutils/elfutils-0.155/elfutils-robustify.patch meta/recipes-devtools/gdb/gdb/libiberty-cross.patch meta/recipes-devtools/perl/perl-5.14.3/asm-pageh-fix.patch meta/recipes-devtools/python/python-native/sys_platform_is_now_always_linux2.patch meta/recipes-devtools/python/python-pygobject/generate-constants.patch meta/recipes-devtools/qemu/files/3f08ffb4a4741d147634761dc053ed386243a0de.patch meta/recipes-devtools/qemu/files/enable-i386-linux-user.patch meta/recipes-devtools/qemu/files/init-info.patch meta/recipes-devtools/rpm/rpm/rpm_fix_for_automake-1.12.patch meta/recipes-devtools/tcf-agent/tcf-agent/fix_tcf-agent.init.patch meta/recipes-extended/iputils/files/arping-break-libsysfs-dependency.patch meta/recipes-extended/libarchive/libarchive/0003-Patch-from-upstream-rev-2516.patch meta/recipes-extended/procps/procps-3.2.8/pagesz-not-constant.patch meta/recipes-gnome/gtk+/gtk+-2.24.22/no-demos.patch meta/recipes-gnome/libglade/libglade-2.6.4/no-deprecation.patch meta/recipes-graphics/mesa/mesa/0005-llvmpipe-remove-the-power-of-two-sizeof-struct-cmd_b.patch meta/recipes-graphics/xorg-lib/libxxf86dga/libxxf86dga-1.1.3_fix_for_x32.patch meta/recipes-kernel/kmod/kmod/fix-undefined-O_CLOEXEC.patch meta/recipes-kernel/linux-libc-headers/linux-libc-headers/connector-msg-size-fix.patch meta/recipes-kernel/linux/linux-yocto/tools-perf-no-scripting.patch meta/recipes-support/gnutls/gnutls/gnutls-texinfo-euro.patch meta/recipes-support/nspr/nspr/fix-build-on-aarch64.patch [YOCTO #5180] Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-12-05classes/recipes: More optimal DISTRO_FEATURES referencesRichard Purdie
Using the contains function results in more optimal sstate checksums resulting in better cache reuse as we as more consistent code. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14perl: perl-ptest.inc polutes package dependencies when ptest not enabledJeffrey C Honig
When ptest is not enabled, the populate_packages_prepend function runs wheter ptest is enabled or not. This causes ptest packages to get in the dependencies list when ptest is not enabled. Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-30recipes: Remove PR = r0 from all recipesRichard Purdie
Remove all PR = "r0" from all .bb files in oe-core. This was done with the command sed -e '/^PR.*=.*r0\"/d' recipes*/*/*.bb -i We've switching to the PR server, PR bumps are no longer needed and this saves people either accidentally bumping them or forgetting to remove the lines (r0 is the default anyway). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26gcc/libtool/perl: Fix various path to sed-native problemsRichard Purdie
If sed-native is built before these programs, hardcoded paths to sed-native can end up in scripts and other parts of the system which may cause issues if they are later used from sstate and sed-native is not installed. To avoid this, this patch changes the global site configuration to specify that plain "sed" is fine to be used. We need to spell this out for gcc since it doesn't see the site files since we don't autoreconf it. We can remove the values from libtool. We tell perl to use "/bin/sed" since it requires a path and the system sed should be just fine for it. [YOCTO #4971] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-24perl: do not use pushdRoy Li
pushd is not available when system is using dash as default shell Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-08-30perl: Backport 2 CVE PatchesSaul Wold
These patches are backported from upstream since it might be risky to update right now They address the following CVEs CVE-2012-6329 CVE-2013-1667 Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-24perl-tests: convert to ptestJesse Zhang
On 05/17/2013 05:31 PM, Björn Stenberg wrote: > Unless there are clear advantages with patching t/TEST that I have overlooked, I suggest using sed in run-ptest instead. Ok.. Here is the new commit. Removed the patch and added a call to sed in run-ptest. See attachment for the test log. From: Jesse Zhang <sen.zhang@windriver.com> Date: Tue, 14 May 2013 02:53:30 -0400 Subject: [PATCH 1/1] perl-tests: convert to ptest Replace PERL_TEST_DIR with PTEST_PATH, and rename "tests" with "ptest" in various places. Also add a run-ptest script. [YOCTO #4292] Signed-off-by: Jesse Zhang <sen.zhang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29libxml-simple-perl: add SUMMARY, DESCRIPTION and HOMEPAGEPaul Eggleton
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-03-22perl: remove the duplicated RDEPENDSRobert Yang
Remove a duplicated line: RDEPENDS_${PN}-module-cpanplus += "${PN}-module-load" [YOCTO #4064] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22perl-native: remove duplicated LIC_FILES_CHKSUMRobert Yang
Remove duplicated LIC_FILES_CHKSUM: LIC_FILES_CHKSUM = "file://Copying;md5=2b4c6ffbcfcbdee469f02565f253d81a \ file://Artistic;md5=f921793d03cc6d63ec4b15e9be8fd3f8" [YOCTO #4064] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-22perl: avoid splitting out .debug directories as packagesPaul Eggleton
The recursive parameter is set to True, the regex for the first call to do_split_packages matches any path under ${libdir}/perl/${PV}/auto/, and the .debug directories contain .so files, so each one was getting picked up as a package. Change the regex to disallow dots in the path beneath auto/ and thus avoid the .debug directories. Fixes [YOCTO #4048]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-03-01perl-nativesdk:fix toolchain relocation issuesHongxu Jia
1, Use create_wrapper to create perl wrapper in the SDK. 2, Add perl.real to perl-nativesdk package. [YOCTO #3338] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-02-17perl: Add auto/XS/Typemap in perl-doc packageOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-25perl: update to 5.14.3Kang Kai
There is a securty issue: http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-5195 Update perl to 5.14.3 to resolve this problem. Patches hurd-ccflags.diff, h2ph-multiarch.diff, index-tainting.diff and hurd-hints.diff have been merged, so remove them from SRC_URI. Update patches config.sh and Makefile.SH.patch with new PV. [Yocto 3701] Signed-off-by: Kang Kai <kai.kang@windriver.com>
2013-01-25perl-native: update to 5.14.3:Kang Kai
There is a securty issue: http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-5195 Update perl to 5.14.3 could resolve this problem. And update perl-native first. Signed-off-by: Kang Kai <kai.kang@windriver.com>
2013-01-25perl-rprovides: Fix perl-module-config anf perl-module-build providersRichard Purdie
The rearrangement of various file contents left these empty modules which don't get packaged and hence lead to image creation errors on anything using them. This patch ensures the dependencies are attached to the packages which contain the config files or the build module infrastructure as appropriate. It also resolves some confusion over whether the name is perl-module-build or perl-module-module-build, the latter being the autogenerated dependency which previously couldn't be found. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-25perl: Add dyanloader build hackRichard Purdie
Patch perl to allow builds to work where a native perl running against target modules attempts to load a dynamic binary module. We assume that a native version of the module exists as it would for the target and perform an appropriate path substitution. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-25perl-native: Add errno_ver.diff patch to native perlRichard Purdie
Apply the errno_ver.diff patch to the native perl version. This ensures that when we're building target modules, running the native perl binary but in a target configuration we don't see error messages. libencode-detect-perl is a module which tests this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-21perl: Fix errors if configure is reattemptedRichard Purdie
If configure of perl is reattempted it currently fails as it tries to edit files outside ${S}. Chaging from ${WORKDIR} to ${S} avoids this issue and allows rebuilds to work. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-20liburi-perl: Add BBCLASSEXTEND for native versionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-16perl: fix installed but not shipped issueKang Kai
It shows warning when bitbake perl: WARNING: QA Issue: perl: Files/directories were installed but not shipped /usr/lib/perl/5.14.2/auto/XS/Typemap That because file Typemap.so is not install correctly. Fix it. Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-07perl: Remove bashism from perl-tests.incOtavio Salvador
The perl-tests.inc file where using the constructs: cp {a,b} to/ but this is not supported in every shell so we cannot use it. This patch fixes it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-12 21:36:10 +0000