aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-devtools/gcc
AgeCommit message (Collapse)Author
2012-08-06gcc-cross-initial: Ensure it uses an isolated sysrootRichard Purdie
If we don't do this, a stale limits.h may be detected in STAGING_DIR_TARGET which would result in a different limits.h getting generated by gcc-cross-initial that references it. The referenced limits.h will then not get found by eglibc-initial causing rather strange build failures. The simplest solution is to create a temporary sysroot containing only the things gcc-cross-initial should care about and this results in a correct limits.h file regardless of what else may have been built. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-03gcc: Bump PR since there have been several gcc changes and various problems ↵Richard Purdie
reported and this should flush anything stale out Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-03gcc-cross-initial: Fix typo causing limits.h not to be presentRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-01gcc-configure-target: Set native-system-header-dir for target gccRichard Purdie
Without this set, in the case host=target (which it does for on-target gcc), the native header directory is set to the target sysroot with no prefix. This means it would look for sdt.h on the build system instead of in the target headers and this can lead to build failures and is host contamination of the build. The correct fix is to explicitly set the native header directory to the correct location and then the headers get detected correctly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-26gcc-cross-initial: Stage self sufficient fixed limits.hKhem Raj
currently gcc installs a limits.h which references to another limits.h which it expects from target sysroot and that header in target sysroot will come from eglibc. So we need to break this catch-22 and hence we install a self sufficient limits.h which is then happy when referenced and doesnt complain about missing limits.h from target sysroot. This is mostly used when eglibc-initial configure is run Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-24libgcc: Add missing dependency on libc:do_packageRichard Purdie
do_package writes out shlibs data and libgcc can depend on the values there. We therefore need to express the depdency so that sstate can account for it for example. Without this a version change in eglibc can "psersist" in the sstate cache and corrupt builds. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-18gcc: remove 904-flatten-switch-stmt-00.patchBernhard Reutner-Fischer
Remove brute-force flattening and bump PR. Refer to -ftree-switch-conversion emit_case_bit_tests(), -ftree-if-to-switch-conversion et al in 4.8 Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-18gcc-package-runtime.inc: Fix QA warningMatthew McClintock
> ERROR: QA Issue: gcc-runtime: Files/directories were installed but not shipped > /usr/lib/libgomp.so.1.0.0 > /usr/lib/libgomp.so.1 Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-17gcc-cross-initial.inc: Use BFD ld as default alwaysKhem Raj
When using gold as default linker in final toolchain gcc-cross-initial still needs to use BFD ld since it will link eglibc-initial Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gcc: Switch to git SRC_URIKhem Raj
svn has been giving troubles with svn 1.7 upgrade Remove duplicate definition of S and B variables from gcc-4.7.inc Use 4.7.1.0 for PV to maintain the upgrade path Its an interim solution once we upgrade to 4.7.2 we will drop it. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gcc: Refresh support for fsl E5500/E6500Khem Raj
These patches are backport from gcc mainline they fix issues where eglibc was not compilable for e5500+ due to missing vector intrinsics It obsoletes the existing e5500 patch Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17gcc: Convert do_headerfix into a definitive patchKhem Raj
do_headerfix task is essentially editing configuration headers in sources which can well be maintained as a patch which is easier to spot errors (if any) than dynamically edited source tree Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17crosssdk/nativesdk: Ensure EXTRA_OECONF_FPU is unsetRichard Purdie
If EXTRA_OECONF_FPU is left set, certain ARM variables related to hard-float can get pulled in and trigger rebuilds of the crosssdk code. The best solution is to simply force the variable to a known correct value for the SDK targets currently supported in the same way as TARGET_FPU. There is some slight rearrangement of the gcc code to ensure the variable is always used to call the fpu function. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-16Update proto -> protocol for recipesSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-07-11libgomp: add libgomp (openmp) library, and build for powerpc targets by defaultMatthew McClintock
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11gcc: gcc-cross-canadian: use correct location for libraries for powerpc64Matthew McClintock
This fixes the issue where gcc invokes the linker with an incorrect -L library location and gives up because it can't find libraries. It was looking in a /lib folder instead of /lib64 Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-11gcc-configure-common.inc: use --with-long-double-128 on powerpc to comply ↵Matthew McClintock
with ABI Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-09gcc-common: Don't use "is" for comparing strings, use "=="Kartik Mohta
Needed because the equality check was failing here even though upon printing the LHS and RHS were the same. As per http://stackoverflow.com/a/2987975/64537, using "is" compares the memory addresses of the two objects which is not what we want here. We just want to compare the values. Signed-off-by: Kartik Mohta <kartikmohta@gmail.com>
2012-07-05gcc: fix collect2 host contamination problem properlyRichard Purdie
We added the autoconf cache line a while back to ensure that configure doesn't poke into some hardcoded host paths looking for things it shouldn't. Applying it as part of do_configure wasn't getting it to the do_compile tasks where much of the configure scripts are run by gcc. This changes it to a simple export to ensure it reaches the places it needs to and truly gets rid of the cross compile badness messages from the logs. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-29gcc-configure-sdk, gcc-configure-cross: Dont recompute USE_NLSKhem Raj
This was needed because on eglibc based builds we did not define USE_NLS but now we define it in default config to have a valid value so we do not need this here. Moreover it was wrong and was not covering all cases of uclibc triplets Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-29libgcc: Remove unpackage unwind.hKhem Raj
Fixes build warnings like below WARNING: For recipe libgcc, the following files/directories were installed but not shipped in any package: WARNING: /usr/lib/arm-oe-linux-gnueabi/4.7.2/include WARNING: /usr/lib/arm-oe-linux-gnueabi/4.7.2/include/unwind.h Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-25gcc: Remove csl gcc recipesKhem Raj
sourcery toolchain is available as external pluggable toolchain if needed. Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-06-25gcc-4.6: Retire into toochain-layerKhem Raj
If anyone wants it add toolchain-layer from meta-openembedded repo to your setup Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-06-21gcc: Fix a case of sysroot with trailing / and gxx-include-dir leading slashKhem Raj
when using --with-sysroot=/ and --with-gxx-headers=/usr/include/c++ configure eats up one leading / from gxx include dir fixed thusly Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-21gcc-4.7: Update to tip of gcc-4_7-branch since 4.7.1 has been outKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-18gcc-cross: argument list too long when do_installRobert Yang
There would be an "Argument list too long" error when the length of tmpdir is longer than 190, this is caused by: headers=`echo $(PLUGIN_HEADERS) | tr ' ' '\012' | sort -u` The PLUGIN_HEADERS is too long before sort, so the "echo" can't handle it, use the $(sort list) of GNU make which can handle the too long list would fix the problem, the header would be short enough after sorted. The "tr ' ' '\012'" was used for translating the space to "\n", the $(sort list) doesn't need this. This doesn't impact the output, so it doesn't need the PR bump. [YOCTO #2591] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2012-06-15gcc-target: ensure target packages have the correct virtual package namesSaul Wold
Resolves this error during do_rootfs: | * satisfy_dependencies_for: Cannot satisfy the following dependencies for task-core-standalone-sdk-target: | * eglibc (>= 2.15) * | * opkg_install_cmd: Cannot install package task-core-standalone-sdk-target. NOTE: package core-image-sato-sdk-1.0-r0: task do_rootfs: Failed Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-06-14gcc-configure-target: Fix sysroot option breakage I introduced (sorry)Richard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-13gcc-configure-common: Use build time sysroot for target gccKhem Raj
Otherwise it assumes / as sysroot on build host and starts searching for directories in there. [RP: Tweak to add missing = for consistent syntax] Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-06-11gcc-common: Replace use of TARGET_ARCH with TRANSLATED_TARGET_ARCHKhem Raj
TARGET_ARCH is poured into TRANSLATED_TARGET_ARCH for gcc-cross family or gcc-crosssdk family of recipes we have to check for TRANSLATED_TARGET_ARCH Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-06-11gcc-common: Enable hardfloat ABI when target is armKhem Raj
We need to check target to be arm before enabling hard-float ABI. There are crossdk targets or candian-cross targets built for arm and we should not enable it for those class of recipes. Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-05-24gcc: Grok for callconvention-hard to enable hard floatKhem Raj
If callconvention-hard is set then we build gcc defaulting to hard-float ABI Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-05-24gcc-4.7: Add knowledge about arm hf dynamic loaderKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-05-20gcc-4.6, gcc-4.7: Add support for building mips64 cross compilerKhem Raj
Defaults to n64 ABI Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-05-06gcc-4.6: disable cloog, change syntax to disable pplAndreas Oberritter
* Backported from 523df15bcc21e1749771cca757613f3520243b8e as suggested by Khem. * Original commit message: If build system has those libraries installed gcc configure will pick them up. We want consistent builds so we disable them since we do not (yet) support them Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-05-04gcc-4.6: explicitly disable pplAndreas Oberritter
* Fixes the following error after a system library upgrade | .../mipsel-oe-linux/4.6.4/cc1: error while loading shared libraries: libppl.so.10: cannot open shared object file: No such file or directory Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-05-03gcc-package-target: add libexec for pluginSaul Wold
Fixes: ERROR: For recipe gcc, the following files/directories were installed but not shipped in any package: ERROR: /usr/libexec/gcc/i586-poky-linux/4.7.1/plugin/gengtype Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-05-02libgcc: Add MLPREFIX to sanity check skipSaul Wold
Fixes: ERROR: QA Issue: non -staticdev package contains static .a library: lib32-libgcov-dev path '/work/x86-pokymllib32-linux/lib32-libgcc-4.7.0+svnr186651-r0/packages-split/lib32-libgcov-dev/usr/lib/i586-pokymllib32-linux/4.7.1/libgcov.a' ERROR: QA run found fatal errors. Please consider fixing them. ERROR: Function failed: do_package_qa ERROR: Logfile of failure stored in: /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-multilib/build/build/tmp/work/x86-pokymllib32-linux/lib32-libgcc-4.7.0+svnr186651-r0/temp/log.do_package.9691 NOTE: package lib32-libgcc-4.7.0+svnr186651-r0: task do_package: Failed ERROR: Task 1077 (virtual:multilib:lib32:/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-multilib/build/meta/recipes-devtools/gcc/libgcc_4.7.bb, do_package) failed with exit code '1' Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-05-01gcc-cross.inc: Fix cross testing scriptKhem Raj
shift the cmdline argument after determining there is atleast 1 argument to shift otherwise it ends up in error when no argument is specified Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-package-sdk: Package plugin files generated by gcc-4.7Khem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-4.7: Do not use --with-header option for cross-gccKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-4.7: Let cpp specs honor include searches in relocated install treeKhem Raj
Fix from Yocto Bug 2074 Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-4.7: Use full relative path in require directiveKhem Raj
This will help in meta-linaro where it will be able to utilize maximum recipes from OE-Core and thereby keep close compatibility with OE-Core gcc recipes Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26libgcc-4.7: Package libgcov nativesdk correctlyKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-4.7: Lower the internal consistency check level to releaseKhem Raj
This should help in speeding up compilation at the expense of a bit less info when gcc ICEs but we dont get many gcc ICEs and therefore using --enable-checking=release is right balance Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-4.7: Disable cloog and pplKhem Raj
If build system has those libraries installed gcc configure will pick them up. We want consistent builds so we disable them since we do not (yet) support them Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-package-target: Add the dangling files to specific packagesKhem Raj
create a new package to have lto dev packages bundled Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-crosssdk-intermediate: Use --with-native-system-header-dir for 4.7Khem Raj
--with-native-system-header-dir is relative to sysroot which is what we want --with-headers is deprecated anyway Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-cross-canadian_4.7.bb: Override ARCH_FLAGS_FOR_TARGETKhem Raj
We need -isystem=${target_includedir} in there Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-26gcc-4.7: Define own do_configure_prependKhem Raj
gcc-4.7 does not define STANDARD_INCLUDE_DIR Signed-off-by: Khem Raj <raj.khem@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-11 18:09:15 +0000