| Age | Commit message (Collapse) | Author |
|---|
|
The order of '_append' and '_<override>' matters: '_append' must be
before overrides to have any effect.
Fix this in glib-2.0, so that EXTRA_OECONF is appended instead of
overwritten.
Signed-off-by: Martin Hundebøll <mnhu@prevas.dk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As we only seed gettext's msgfmt as /bin/false for native builds, explicitly set
USE_NLS to yes in the recipe (as it was previously) for targeget and nativesdk
builds.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* ls.c license checksum is changed, but the license remains the same.
* The backported patch 0001-doc-fix-Up-field-of-realpath-usage-examples.patch
is dropped.
* The new version provides native manual page support, there's no
need to download extra manual page from gentoo site.
* man-decouple-manpages-from-build.patch is removed, as new version
has manual page support in environment lacking of perl.
* hostname is explicitly enabled to keep the same with previous recipe's
behaviour.
* ALTERNATIVE_XXX settings for lbracket.1 are removed as there's no such
file.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
By removing gettext-native as a build dependency in glib-2.0-native we can delay
the build of gettext-native further. The gettext class will add the dependency
for target builds.
Don't forcibly set USE_NLS=yes so that NLS support is supposedly disabled in
native builds. GLib will then force it back on, but we shouldn't be using it in
any other native recipes so seed the autoconf cache so GLib will run /bin/false
instead of msgfmt. Quite a kludge, but it works and should fail obviously if
the kludge stops being sufficient.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changes to Makefile in latest version mean when "make -k runtests" is executed,
it leads to errors like:
| make: *** No rule to make target 'runtest.c', needed by 'runtest.o'.
| make: *** No rule to make target 'SAX.c', needed by 'SAX.lo'.
| make: *** No rule to make target 'entities.c', needed by 'entities.lo'.
| make: *** No rule to make target 'encoding.c', needed by 'encoding.lo'.
Make sure that we don't try to check and compile the tests again on the target.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't have /etc/netgroup by default, so do not
cache for netgroup by default to avoid:
nscd[529]: 529 disabled inotify-based monitoring for file `/etc/netgroup': No such file or directory
nscd[529]: 529 stat failed for file `/etc/netgroup'; will try again later: No such file or directory
(From OE-Core rev: 10007bcd30a96470059f9d5b19cf698243486f06)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gettext has optional dependencies on libxml2, glib, libcroco and libunistring.
If they're not available then gettext will use internal copies, but it can also
use system libraries.
For gettext-native and nativesdk-gettext continue to use the internal copies to
reduce the dependencies, but for target use the system shared libraries.
Also gettext 0.19.7 onwards swapped expat for libxm2, so remove the build
dependency on expat.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
nativesdk-glib-2.0 doesn't build-depend on nativesdk-gettext, but all variations
need to depend on gettext-native as they need msgfmt (so gettext-minimal-native
isn't an option).
Also add virtual/libintl as glib explicitly needs this. Generally this is
provided by glibc but some platforms (such as MinGW) don't.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using host gpg has been problematic, and particularly this removes
the need to serialize package creation, as long as --auto-expand-secmem
is passed to gpg-agent, and gnupg >= 2.2.4 is in use
(https://dev.gnupg.org/T3530).
Sadly, gpg-agent itself is single-threaded, so in the longer run
we might want to seek alternatives:
https://lwn.net/Articles/742542/
(a smaller issue is that rpm itself runs the gpg fronted in a serial
fashion, which slows down the build in cases of recipes with very
large amount of packages, e.g. glibc-locale)
Note that sstate signing and verification continues to use host
gpg, as depending on native gpg would create circular dependencies.
[YOCTO #12022]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we migrated rpm v5 -> v4, we lost the ability to drop "per file"
dependencies from the rpm backend for things like "/bin/bash" and
"/usr/bin/env" which meant the sdks were becomming 'bloated'.
This restores the functionality using a dummy package, similarly to
the way the buildtools perl issue was addressed. It also removes
the non-functional old code so as not to confuse people in future.
I ran into this problem trying to filter dependencies to only rpms
a build directly depends upon and it turns out we have some determinism issues
in this area so this is something key to fix.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise it doesn't work since SYSTEMD_SERVICE_volatile-binds is not defined
when multilib.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Switch to using current repository, switch to meson (following
upstream), rename the recipe like upstream.
Add a patch to install the player binaries.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commit "glib-2.0: Add python3 modules required by gdbus-codegen"
(26af3b4b33a34d7e53059b07236f9d5aae5e004a) broke the MinGW build of
QEMU. To fix the build remove the python3 RDEPENDS for gdbus-codegen
when targeting mingw.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are the multiple process crashes seen while using malloc_info.
Obtain the size information while the arena lock is acquired, and only
print it later.
Backport patch from https://sourceware.org/git/gitweb.cgi?p=glibc.git;
h=7a9368a1174cb15b9f1d6342e0e10dd90dae238d
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For detailed view of changes see
https://github.com/kraj/glibc/compare/glibc-2.26...77f921dac17c5fa99bd9e926d926c327982895f7
Drop two upstreamed patches
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* fixes "lambda-expression in unevaluated context" compile failures such as
https://github.com/nlohmann/json/issues/705
* fixes "no match for 'operator==" compile failures such as
https://bugzilla.redhat.com/show_bug.cgi?id=1482990
Signed-off-by: S. Lockwood-Childs <sjl@vctlabs.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use distro_features_check so that we can have a uniform controller.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use distro_features_check so that we can have a uniform controller.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd-boot shouldn't be built for x32. Make sure that this is the
case when TCLIBC is set to something other than glibc.
Fixes [YOCTO #12122]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These commits are added
https://git.musl-libc.org/cgit/musl/log/?qt=range&q=eb03bde2f24582874cb72b56c7811bf51da0c817..4000b0107ddd7fe733fa31d4f078c6fcd35851d6
Key fix for malloc
https://git.musl-libc.org/cgit/musl/commit/?id=a71b46cfd289aa0ff829fc9a436c59c398f8326d
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
thumb1 is unsupported see http://www.openwall.com/lists/musl/2017/10/20/10
Fix
[YOCTO #12336]
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The gdbus-codegen tool depends on python3, python3-distutils and python3-xml at
runtime. But because these dependencies are not stated in the yocto recipe,
those python modules are not automatically included in the SDK.
Signed-off-by: Jef Driesen <jef.driesen@niko.eu>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 32bit core-image-minimal-initramfs should be built when build lib32-iso, e.g.:
MACHINE = "qemux86-64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "x86"
IMAGE_FSTYPES += "iso"
$ bitbake lib32-core-image-minimal
Exception: FileExistsError: [Errno 17] File exists: '/path/to/tmp/sysroots-components/core2-64/qemuwrapper-cross/usr/bin/crossscripts/qemuwrapper' -> '/path/to/tmp/work/qemux86_64-pokymllib32-linux/lib32-core-image-minimal/1.0-r0/lib32-recipe-sysroot/usr/bin/crossscripts/qemuwrapper'
This was because:
lib32-core-image-minimal -> core-image-minimal-initramfs
core-image-minimal-initramfs -> qemuwrapper-cross
lib32-core-image-minimal -> lib32-qemuwrapper-cross
So we got the error, build lib32-core-image-minimal-initramfs can fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upgrade dbus-test to 1.12.2 as dbus has been upgraded to this version.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
1. os-test.patch is removed because current dbus has removed
distro specific init script.
2. Add autoconf-archive to DEPENDS to fix do_configure failure as below.
error: Unexpanded AX_ macro found.
3. Modify FILES variable to fix installed-vs-shipped QA issue.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The kexec-tools do not currently support MicroBlaze, override the
KEXECTOOLS variable to disable the inclusion of these tools in the
packagegroup.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The libasan and libubsan sanitizers are not available for MicroBlaze.
Follow the overriding of the SANITIZERS variable as done for other
architectures to remove these from the packagegroup when targeting
MicroBlaze.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently, if "systemd --test" is not allowed to complete
sending output, it will segfault.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The ovmf package fails to build if you use a PARALLEL_MAKE flag
without a space in it. If you put the following in local.conf for
example:
PARALLEL_MAKE = "-j4"
The build will fail with as follows:
| build.exe: error: Option -n only allows one instance in command line!
| WARNING: /opt/build/ovmf/git-r0/temp/run.do_compile.26080:1 exit 2 from '/opt/build/ovmf/git-r0/git/OvmfPkg/build.sh $PARALLEL_JOBS -a $OVMF_ARCH -b RELEASE -t ${FIXED_GCCVER}'
| ERROR: Function failed: do_compile (log file is located at /opt/build/ovmf/git-r0/temp/log.do_compile.26080)
The failure is because the build.sh expects a space. The simple work
around is to fix the recipe to add some white space. The build.sh
only cares that it gets at least one space between the arguments, the
extra space if someone uses "-j 4" does not cause problems.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Some source files aren't valid utf-8 containing for example
iso8859-1 accented characters in author's names.
Replace invalid data with a replacement '?' character and
print a warning to keep things working.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add PACKAGECONFIG for single-binray. Disable it by default.
When enabled, there would only be one binary file /usr/bin/coreutils, other
files like 'ls' are text files containing contents like:
#!/usr/bin/coreutils --coreutils-prog-shebang=ls
And the size of the rpm package reduces from 849K to 519K.
Default to disable this option to keep the traditional behaviour.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upgrade coreutils to 8.28.
Backport a patch to fix the following build error on centos7.
warning: unreferenced node `Realpath usage examples'
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is breaking input in qemu (and maybe more).
This reverts commit 915b99bb8faa29ce3d35c0d6a1e96fa9bcc5c6f1.
[ YOCTO #12403 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In the add_match function in libbb/lineedit.c in BusyBox through 1.27.2,
the tab autocomplete feature of the shell, used to get a list of filenames
in a directory, does not sanitize filenames and results in executing any
escape sequence in the terminal. This could potentially result in code
execution, arbitrary file writes, or other attacks.
Backport the patch from:
https://git.busybox.net/busybox/commit/?id=c3797d40a1c57352192c6106cc0f435e7d9c11e8
https://nvd.nist.gov/vuln/detail/CVE-2017-16544
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* files is already included in default FILESPATH
* it cannot inherit allarch as it RDEPENDS on bunch of TUNE_PKGARCH packages
* use the same COMPATIBLE_HOST restrictions as grub has to prevent ERRORs in
bitbake world
ERROR: Nothing RPROVIDES 'grub' (but oe-core/meta/recipes-core/initrdscripts/initramfs-module-install_1.0.bb RDEPENDS on or otherwise requires it)
grub was skipped: incompatible with host arm-oe-linux-gnueabi (not in COMPATIBLE_HOST)
grub was skipped: incompatible with host arm-oe-linux-gnueabi (not in COMPATIBLE_HOST)
NOTE: Runtime target 'grub' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['grub']
ERROR: Required build target 'meta-world-pkgdata' has no buildable providers.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This new module allow for easy execution of external scripts or
applications. It runs anything found in /exec.d directory in order and
in case of no scripts to be available, it opens a shell.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If we have 'wifi' in distro feature, then busybox would have rfkill
enabled. And we would have the following do_rootfs failure if we
install both busybox and util-linux-rfkill.
Error: cannot register alternative rfkill to /usr/bin/rfkill since
it is already registered to /usr/sbin/rfkill.
There's another provider of rfkill in OE, that is rfkill recipe in meta-oe.
And it also registers rfkill to ${sbindir}/rfkill.
So change the register location of rfkill in util-linux to avoid
conflict with busybox and rfkill recipes.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The original initramfs-live-boot recipe RDEPENDS on udev, which is ok since
the init script relies some of its functionality on udevadm and such,
but on core-image-tiny-initramfs the init script simply drops to shell
after a basic setup, so udev is not needed.
This patch splits up an initramfs-live-boot-tiny recipe which does not
use udev, but uses busybox-mdev instead, eudev installed about 600
extra Kilobytes to core-image-tiny-initramfs userspace, by avoiding to
install eudev we achieve an even smaller footprint (almost 40% smaller).
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For these reasons:
1) Upstream website has been dead for quite a while now;
2) Nothing is actually using neon in oe-core, except one gstreamer plugin in gst-plugins-bad
(and I couldn't find evidence of that plugin being used anywhere)
However, the recipe is still required by libmusicbrainz in meta-oe and so it will be moved there
(with the tarball taken from debian).
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
I wasn't able to install to my Optane SSD due to the following error:
Formatting /dev/nvme0n1p1 to vfat...
mkfs.fat 4.1 (2017-01-24)
mkfs.vfat: unable to open /dev/nvme0n1p1: No such file or directory
Target install-efi failed
A couple lines later I see:
[ 10.265401] nvme0n1: p1 p2 p3
Then looking at the device itself after booting from a USB stick:
root@intel-corei7-64: ~# ls /dev/nvme0n1*
/dev/nvme0n1 /dev/nvme0n1p1 /dev/nvme0n1p2 /dev/nvme0n1p3
So it looks like the parted commands return before the device node is
actually created.
Work around this issue by waiting for device nodes for a short duration.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The grub_version variable was calling 'grub-install -v' (verbose) instead
of 'grub-install -V' (version) causing unexpected failures.
Fixes bug [YOCTO #12111].
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In order to make that the default provider for initd-functions.
[YOCTO #10944]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Stop using update-alternatives for managing /etc/init.d/functions. Also,
make the initscripts-functions subpackage to (runtime) conflict with
lsbinitscripts.
[YOCTO #10944]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
- Add whitelist hd* devices
- Backport latest rules from upstream
- Fix formatting IDE storage does not trigger "change" uevents
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Formatting IDE storage does not trigger "change" uevents. As a result
clients using udev API don't get any updates afterwards and get outdated
information about the device.
...
root@qemux86-64:~# mkfs.ext4 -F /dev/hda1
Creating filesystem with 262144 4k blocks and 65536 inodes
Filesystem UUID: 98791eb2-2bf3-47ad-b4d8-4cf7e914eee2
root@qemux86-64:~# ls /dev/disk/by-uuid/98791eb2-2bf3-47ad-b4d8-4cf7e914eee2
ls: cannot access '/dev/disk/by-uuid/98791eb2-2bf3-47ad-b4d8-4cf7e914eee2': No such file or directory
...
Include hd* in a match for watch option assignment.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
LGPL version has been updated from 2.0 to 2.1, adjust the checksums accordingly.
Rebase various patches.
A few tools have been rewritten from perl (or C) to python, so
add a patch that avoids hardcoding the python path in the shebang,
and remove previous patching with sed.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Martin Hundebøll
Ross Burton
Chen Qi
Anuj Mittal
Jackie Huang
Alexander Kanavin
Richard Purdie
Robert Yang
Jussi Kukkonen
Alistair Francis
Zhixiong Chi
Khem Raj
S. Lockwood-Childs
Andrea Adami
Andre McCurdy
Jef Driesen
Nathan Rossi
Joe Slater
Jason Wessel
Martin Jansa
Otavio Salvador
Alejandro Hernandez
California Sullivan
Markus Lehtonen
Hongxu Jia