aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-core
AgeCommit message (Collapse)Author
2013-11-20sysvinit: fix problem in switching runlevelsChen Qi
Previously, if we switch to runlevel 1 and then switch back to runlevel 5, the network interface will be brought down and the NFS service will not be restarted correctly. The problem is that the networking and rpcbind services are brought down in runlevel 1 but not brought up in runlevel 5. This patch fixes the above problem. It's based on the assumption that in sysvinit-based system, runlevel 1 does not have networking support. This patch adjusts some init script parameters used by update-rc.d. It makes sure that networking starts before rpcbind which in turn starts before mountnfs.sh. When switching to runlevel 0, 1 and 6, the umountnfs.sh is run first before stopping rpcbind service, and the network is brought down afterwards. [YOCTO #5513] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-18sysvinit: unmount the psplash lazyilySaul Wold
There is an race condition where psplash is not quite exited before the unmount occurs causing a umount: /mnt/.psplash: target is busy message to appear, it's ok to lazyily unmount and not get this message [YOCTO #5244] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-18packagegroup-core-boot: Drop build-time dependency on virtual/kernelMartin Jansa
* because kernel isn't needed to build packagegroup and building it doesn't influence if it's included in image or not. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-14systemd: fix commentsPaul Eggleton
It's DISTRO_FEATURES; DISTRO_FEATURE is invalid. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-12Revert "glib-2.0: Specify libiconv when building on uclibc"Khem Raj
This reverts commit 38b6c4df7c215ed7fd6be107fbc2527e66791e2e. Its not needed anymore after upgrade to 2.38 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-12systemd: Upgrade 206 -> 208Khem Raj
Remove patches accepted upstream Forward-port uclibc patches Create additional packages to bundle zsh support files Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-12glib-2.0: move more logic to the .incRoss Burton
The .bb was getting larger with configuration being arbitarily split between .bb and .inc. To help adding a glib_git recipe, strip the .bb down to SRC_URI. Also don't remove $libdir/gio as it should be owned by glib. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-08kbd: Fix stdarg related errors on uclibcKhem Raj
It does not get stdarg.h included indirectly as it happens on uclibc due to different include chain Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-08kbd: upgrade to 2.0.1Saul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-08sysvinit: adjust boot sequence and remove hack from udevChen Qi
Adjust the boot sequence in sysvinit based systems. The mountall.sh (mounting the local file system) needs to be started before udev and bootlogd. This patch makes mountall.sh start before udev and removes the hack of mounting tmpfs in the udev init script. This patch also adds some comments to the udev init script to make it clear why we create the '/var/volatile/tmp' directory. [YOCTO #5273] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-08bootlogd: create log file if not presentChen Qi
Previously, our system had no boot log even if the bootlogd daemon was started correctly. The root cause is that the log file doesn't exist when starting the bootlogd. Add '-c' option to bootlogd so that it will create the boot log if it doesn't exist. [YOCTO #5273] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-08eglibc_2.17.bb: accept make versions 4.0 and greaterJonathan Liu
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-08eglibc_2.18.bb: accept make versions 4.0 and greaterJonathan Liu
[YOCTO #5391] Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-06toolchain-scripts/meta-environment: Further cleanup code duplicationRichard Purdie
There was still duplicated code in toolchain-scripts, this further cleans up the functions to remove it. The now unused includedir parameter is also dropped. The final scripts do end up reordered slightly and the sysroot is parametrised for the IDE scripts which is an improvement but should have no functional difference. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-06toolchain-scripts/meta-environment: Merge toolchain_create_sdk_env_script ↵Richard Purdie
and the for_installer variant Having two scripts which do basically the same thing is a nightmare. This merges them together. It also makes the sysroot location a variable in its own right which may be more useful for end users wanting to change sysroot. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-11-04eglibc-locale: Does not create {localedir} if the toolchain has no files ↵Roy Li
under it This will kill the not shipped Error: ERROR: QA Issue: eglibc-locale: Files/directories were installed but not shipped /usr/lib/locale Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-11-01jpeg: enable postinst to run at rootfs time successfullyChen Qi
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-31busybox: fix sed auto insert newline testcaseJackie Huang
backport the patch from busybox upstream to fix the auto insert newline issue. busybox defect: https://bugs.busybox.net/show_bug.cgi?id=6584 Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-31udev: fix typo in local.rulesSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30ncurses-terminfo: Remove bashism from basic terminfo installationSeth Bollinger
The vtX terminfo files aren't being copied on systems where bash isn't the default shell (debian, etc.). I removed the bash specific syntax so the files are properly copied on these systems. Signed-off-by: Seth Bollinger <seth.boll@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30coreutils: support command archHongxu Jia
The "arch" is removed in util-linux 2.23, but some old software and devs look for arch: http://lists.gnu.org/archive/html/bug-coreutils/2007-06/msg00010.html Use coreutils version. [YOCTO #5404] Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> [sgw: fixed ordering to be alphabetized] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30systemd-compat-units: run-postinsts fix script linkAndreas Müller
in commit fe039170236080291c0220476a5809774f82ee5c Author: Muhammad Shakeel <muhammad_shakeel@mentor.com> Date: Wed Oct 2 10:55:32 2013 +0000 systemd-compat-units: Use correct run-postinsts script link OE-Core commit 75a14923da1ba91eddde47f0907345c19c82d6f0 has moved run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service should check for this script and run it on first boot rather than S98run-postinsts, which is for opkg/dpkg. the link was corrected but the mentioned commit is not available. Instead of reverting, we use the same variable as opkg for init script ordering and drop a note in case somebody wants to change default. Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30recipes: Remove PR = r0 from all recipesRichard Purdie
Remove all PR = "r0" from all .bb files in oe-core. This was done with the command sed -e '/^PR.*=.*r0\"/d' recipes*/*/*.bb -i We've switching to the PR server, PR bumps are no longer needed and this saves people either accidentally bumping them or forgetting to remove the lines (r0 is the default anyway). Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-30dbus: no messages of status command printLu Chong
/etc/init.d/dbus-1 use "set -e" to let the script exit when any command failes. This will cause "/etc/init.d/dbus-1 status" command can't display messages when dbus is stopped. Signed-off-by: Lu Chong <Chong.Lu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30udev: Update touchscreen rule for ID_INPUT_TOUCHSCREENTom Rini
Since udev 174 udev has been running input_id as a built-in command and setting this value in the environment for touchscreens. Use this logic to detect when to make a touchscreen0 symlink. Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30glib-2.0: upgrade to 2.38.1Cristian Iorga
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-30pigz: Add pigz to buildtools tarballKonrad Scherer
When using the tar executable in the buildtools, tar will execute gzip. If this happens before zlib-native is built, then the gzip on the host will be used and can fail if the libz in the buildtools is not compatible. Adding pigz to the build tools avoids this host contamination. Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-26base-files: remove invalid entries from /etc/shellsMing Liu
It's more reasonable and secure to keep /etc/shells a minimal file, and then entries for valid shells be added dynamically to the system, only if the packages that provide them are supported. Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-26dropbear: update to 2013.60 versionMaxin B. John
update to latest version 2013.60 Update 0006-dropbear-configuration-file.patch for 2013.60 Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-26kbd: Use libcheck instead of checkSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-26packagegroup-base: if zeroconf DISTRO_FEATURE enabled, add libnss-mdnsRoss Burton
mDNS name resolution is a key part of mDNS, so if the DISTRO_FEATURE is enabled then install libnss-mdns. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-23midori: exclude from self-hosted for mips64Jackie Huang
midori depends on webkit-gtk which could not build for mips64. [YOCTO #5141] Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-23initramfs-framework: fix test that filter backup module filesMichaël Burtin
Test that filter backup module files (files starting with ~) was accidentally reversed in e6039e6e3b98d6ab91252a5012d76279b1fac6e8, this patch restore initial behavior. Signed-off-by: Michaël Burtin <michael.burtin@innotis.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-18udev: update local rules for new touchscreen deviceChase Maupin
* While working with a new capacitive touchscreen it was found that the existing udev rule that creates the /dev/input/touchscreen0 symlink was too restrictive and did not match the MODALAIS entry for this touchscreen. which is: MODALIAS=input:b0018v0000p0000e0000-e0,1,3,k14A,ra0,1,2F,35,36,39,mlsfw * By looking at the input_print_modalias function in the Linux kernel drivers/input/input.c file and referencing the meaning of the evbits and attributes of the input_dev structure it seems that for identification of a touchscreen the match with ,18 which was matching part of the absbit structure is overkill. * It seems that the absbit entry is used for devices like touchscreens and if that the the "a" is followed by 0 and 1 this is sufficient. * So the logic has now been changed to check for the "e" 0 and 3 values which correspond to EV_SYN and EV_ABS, then check for the "a" attribute with 0 and 1. * More information and history for this can be found at: http://patchwork.openembedded.org/patch/25093/ http://thread.gmane.org/gmane.comp.handhelds.openembedded.core * This patch mirrors a patch done by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-18base-passwd: upgrade to 3.5.28Saul Wold
Disable docs creation for now it uses po4a and sgmltools-lite which are not currently part of OE-Core Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-18kbd: Update to 2.0.0Saul Wold
Removed patch that is now included upstream, add DEPENDS on check since it is now used to create. Additional added PACKAGECONFIG for PAM and --disbale-vlock License checksum updated to reflect additional Copyright owners names. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-18initscripts: insure checkroot.sh runs before anything writing to the fileJeffrey C Honig
If bootlogd was configured to write to a log file on the root file system, the checkroot.sh was not able to change the rootfs to read-only because bootlogd was started earlier and had a file descriptor open. Lowering the order of checkroot.sh ensures that the volatile filesystem is set up before anything writes to it. Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com> Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-10-16glib-2.0: fix build on Aarch64Riku Voipio
Backported patch from upstream Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-16busybox: Add depmod (adds 2240 bytes)Saul Wold
This will allow packages that update kernel modules to run correctly Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-14glib-networking: upgrade to 2.38.0 and PACKAGECONFIGiseRoss Burton
Use PACKAGECONFIG to add options for ca-certificates, gnutls, and libproxy. Enable ca-certificates by default as all it needs to know is the right path, ca-certificates not being installed isn't fatal. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-14glib-2.0: upgrade to 2.28.0Ross Burton
Drop the ptest patches and instead use --enable-installed-tests, updating run-ptest to invoke gnome-desktop-testing-runner. Drop the x32 build patch, upstream has integrated a similar fix. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-14sysvinit-inittab: Fix getting tty device name from SERIAL_CONSOLES entriesMuhammad Shakeel
Currently the part after "tty" in the device name go into label along with everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0" than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100. If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed. Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-11build-appliance: Update SRCREV for releaseRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-08build-appliance: Update SRCREV for releaseRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-06systemd: Add PACKAGECONFIG for cryptsetupMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-06glib-networking: Add PACKAGECONFIG for p11-kitMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-04systemd-compat-units: Use correct run-postinsts script linkMuhammad Shakeel
OE-Core commit 75a14923da1ba91eddde47f0907345c19c82d6f0 has moved run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service should check for this script and run it on first boot rather than S98run-postinsts, which is for opkg/dpkg. Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-10-04dbus: fix QA error building nativesdk-dbusPaul Eggleton
Fixes the following QA error: ERROR: QA Issue: nativesdk-dbus: Files/directories were installed but not shipped /run /run/dbus Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30psplash: copy image files from workdir instead of next to recipePaul Eggleton
During parsing this recipe builds up a list of splash image files, however it was recording full paths to local files (i.e. the files next to the recipe) and then in do_compile it was pointing to those instead of the fetched files in WORKDIR. Fix it to use the fetched files which has the added benefit of the do_compile signature not changing if the recipe is moved around. Fixes [YOCTO #5250]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-30nativesdk-packagegroup-sdk-host: Add nativesdk-makedevsDavid Nyström
Add makedevs to SDK, to allow simple /dev/ population. Signed-off-by: David Nyström <david.nystrom@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-10 23:13:36 +0000