Age | Commit message (Collapse) | Author |
|
* use base_bindir like busybox does to prevent conflicting u-a configs
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* tested for qemuarm, qemux86 with -O, -O0, -Os, with gcc
* to build with -O0 I had to remove restriction from systemtap first
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When mount command is executed in rootfs module of initrd, eudev creates
a loop0 device node, applies rules and adds a inotify watch to it. Right
after this step, we execute finish which first tries to kill any running
udevd daemon before doing a switch_root.
In some cases, it is possible that switch_root is executed before
inotify_add_watch was actually processed which would lead to errors like:
| inotify_add_watch(6, /dev/loop0, 10) failed: No such file or directory
Make sure that we process all the events in queue before actually trying
to kill udevd to prevent this race.
Fixes [YOCTO #12861]
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Udev-extraconf works correctly with sysvinit in the aspect of automounting
block devices. But it has a serious problem in case of systemd. Block devices
automounted by udev is unaccessible to host space(out of udevd's private
namespace). For example, we cannot format those block devices.
e.g.
root@qemux86:~# mkfs.ext4 /dev/sda1
mke2fs 1.43.8 (1-Jan-2018)
/dev/sda1 contains a ext4 file system
last mounted on Tue Apr 3 06:22:41 2018
Proceed anyway? (y,N) y
/dev/sda1 is apparently in use by the system; will not make a filesystem here!
Other distributions has no such problem, because they use a series of rules to
manager block devices. Different types of block devices match different rules.
But udev-extraconf just use one rule, automount.rules, which results in this
problem.
The 'systemd-mount' command is recommended by the systemd community to solve such
problems.
This patch makes use of 'systemd-mount' to solve the above problem.
[YOCTO #12644]
(From OE-Core rev: a0b3389c5afc23f622f793cbad8b4135093e6f08)
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: d24bafa872cd1915ca23468bb37be98518347e02)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: c70bb5a24e8923a34adb9c7b8298ae12702e3f27)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
tr is available in busybox, but not in toybox. Just use sed instead.
Signed-off-by: Andrew Bresticker <abrestic@waymo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid coreutils conflicts with nice from other recipes, like
busybox - even if that's not enabled by default.
In situations, where coreutils is a dependency for -dev images
and small busybox nice is available always, it avoids extra
effort for coreutils for those users.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Set configure option '--with-rootlibexecdir' for eudev to fix udev.pc file conflict:
| file /usr/share/pkgconfig/udev.pc conflicts between attempted installs of eudev-dev-3.2.5-r0.core2_64 and lib32-eudev-dev-3.2.5-r0.x86
It alway sets 'udevdir' in udev.pc with value '/lib/udev' that systemd
does the same thing.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When installing libgloss libraries handle the ${TARGET_SYS}/lib contents
so that it is placed in ${libdir} instead of ${libdir}/lib. This
resolves a packaging QA issue.
ERROR: libgloss-3.0.0-r0 do_package: QA Issue: libgloss:
Files/directories were installed but not shipped in any package:
/usr/lib/lib
/usr/lib/lib/libnosys.a
/usr/lib/lib/nosys.specs
Please set FILES such that these items are packaged. Alternatively
if they are unneeded, avoid installing them or delete them within
do_install.
libgloss: 3 installed and not shipped files. [installed-vs-shipped]
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Not doing so will make meson chose where to install init binary
based on irrelevant features of the build machine.
PACKAGECONFIG option is defined to override this behavior.
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This variable is otherwise unset leading to missing dependency warnings. Give
it the same default as used elsewhere in other recipes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The busybox-syslog rrecomends is proving tricky as it gets pulled in early and
there are conflicts between its use of update-alternatives and busybox needing
to provide those things.
We already have recipes using BAD_RRECOMMENDS to remove this dependency, it probably
makes sense to spell it out explicitly and allow it to be overridden more easily.
This patch does this, dropping the now unneeded BAD_RRECOMMENDS. It preserves
the dependency as a recommendation for now, further cleanup may allow simplication
of that.
This unbreaks certain build failures on the autobuilder, more as a workaround but
is a change we probably want to make anyway.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we don't do this, busybox-syslog can install before busybox
which clearly doesn't make sense and can trigger postinst failures
(missing sed which u-a depends upon).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop upstreamed patches, refresh the rest.
Add an explicit dependency on gettext-native, as glib is no longer
fooled by setting msgfmt to /bin/false.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Wait to fail invalid usernames to fix
CVE-2018-15599
Rework 0006-dropbear-configuration-file.patch
to fix fuzz warnings
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
os-release (5) recommends that the os-release file be installed in
/usr/lib/os-release and that /etc/os-release be a relative symlink to it.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently these are in ${PN} and ${PN}-syslog may get replaced by
other packages but update-alternatives would error in the postinst
if other files were installed first. Avoid the problems by putting
the links in the correct package.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
coreutils installs these into bindir, folllow its lead to avoid postinst
failures when installing coreutils and busybox together.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- refresh busybox-udhcpc-no_deconfig.patch
- remove obsolete patches which are included in this update
- update defconfig
- Add newly required virtual/crypt depends [RB]
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All 1.1.20 Release Notes
https://git.musl-libc.org/cgit/musl/commit/?id=0fa1e638e87cf257e9f96b4019b2076afd674a19
ChangeLog for this change in OE
https://git.musl-libc.org/cgit/musl/log/?qt=range&q=767f7a1091af3a3dcee2f7a49d0713359a81961c..0fa1e638e87cf257e9f96b4019b2076afd674a19
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
git.gnome.org is no more. It has ceased to be. It's an ex-git.
Please see here:
https://about.gitlab.com/2018/05/31/welcome-gnome-to-gitlab/
Note that gitlab does not support git://, only https:// (and ssh).
[Commit message from Alexander Kanavin]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
architectures
This support is there using cross-localedef but was not enabled, this
caused the post-install for locales to be emitted which delays the boot
significantly.
emitted postints for locales contain exit 1 which is flagged now and was
causing image generation to fail.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Affects libcgroup <= 0.41
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Important regression fixes for mips and pthreads
https://git.musl-libc.org/cgit/musl/log/?qt=range&q=1ad8138819ced49851e618c9c063aa0ffc86718c..767f7a1091af3a3dcee2f7a49d0713359a81961c
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
clang is fussy and complains that a valueless return is used from a
function which should return a value
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes issues mainly seen when mounting eMMC devices:
The wildcard /sys/block/${DEVBASE}/${DEVBASE}*1 matches both "mmcblk0p1"
and "mmcblk0boot1" for example, and this results in syntax errors. Fix this
by searching for a "partition" file instead, which only exists for real
partitions and not 'fakes' like the eMMC extra's.
When mount fails, the mountpoint file is left behind, causing later attempts
at auto-mounting it to fail. If mount fails, remove the mountpoint, leaving
the system in the state as it was before the mount attempt.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace usage of oe.utils.getstatusoutput() with direct subprocess calls.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have library functions to handle multilib variables/datastores, lets
use them so we have good common functions.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently if a tune isn't specified in the table, the loader defaults for the
architecture are used which may or may not match our path specification. This
leads to general confusion.
Change the code to use the linuxloader class which works of architecture, not
tune.
This still isn't perfect as n32/x32 aren't covered but its an improvement
to listing all tunes here.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The existing kernel-devsrc package starts with a full copy of the kernel
source and then starts to strip out elements that are not required.
This results in extra time (I/O) and extra space being taken up in the
final package. The main purpose of the kernel-devsrc package has been to
build modules against the running kernel, not to include a full copy of
the source code for re-building the kernel. The end result was a
600M kernel-devsrc package.
This restructuring of the package uses an approach similar to other
distros, where the kernel-devsrc package is for building against the
running kernel and uses a curated set of copied infrastructure, versus
a mass copy of the entire kernel.
The differences in this approach versus other is largely due to the
architecture support and the split build/source directory of the
kernel.
The result is a kernel-devsrc package of about 10M, which is capable
of running "make scripts" and compiling kernel modules against the
running kernel.
Along with the changes to the copying of the infrascture, we also
have the following changes:
- a better/more explicit listing of dependencies for on-target
builds of "make scripts" or "make modules_prepare"
- The kernel source is installed into /lib/modules/<version>/build
and a symlink created from /usr/src/kernel to the new location.
This aligns with the standard location for module support
code
- There is also a symlink from /lib/modules/<version>/source -> build
to reserve a spot for a new package that is simply the kernel
source. That package is not part of this update.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On other distros like ubuntu/centos, libnss-db usually provides:
- The libraries
- The Makefile to create database
(in /var/db for centos, /var/lib/misc/ for ubuntu)
- The makedb command (it's in glibc-common for centos7)
What we had is:
- The libraries are in glibc-extra-nss
- The Makefile is removed
- The makedb command is in glibc-utils (lack of dependency)
So when glibc-extra-nss is installed but glibc-utils is not,
we see error like:
nscd[165]: 165 checking for monitored file `/var/db/group.db': No such file or directory
nscd[165]: 165 checking for monitored file `/var/db/passwd.db': No such file or directory
And there is not an easy way to create these databases.
To fix the issue:
- Re-package the libraries into libnss-db
- Don't remove the Makefile and add it in libnss-db
- Add RDEPENDS for libnss-db on glibc-utils
- Provide a shell script, makedbs.sh, to generate the db files.
This is to avoid dependency on 'make'.
Notes:
1. For external toolchain, an extra package 'libnss-db' need to be provided
If replacing glibc from core.
2. I've check the git history of nss/db-Makefile, the last two functionality
fix is as below.
- fix non-portable `echo -n` usage -- Date: Thu Aug 6 04:14:20 2015 -0400
- Fix db makefile rule for group.db -- Date: Fri Nov 11 14:43:36 2011 +0100
So I think this file is stable enough. And using makedbs.sh which is crafted according
to that file is not likely to cause maintanence problem.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use a heap allocated string to set arg_ifname, since a stack allocated
one would be lost after the function returns. (This last one broke the
case where an interface name was suffixed with a dot, such as in
`resolvconf -a tap0.dhcp`.)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Simon Ausserlechner <simon.ausserlechner@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- its a general problem however observed on armv5te based boards in OE
other arches either have ways to compensate for misaligned access in hardware
or compiler does not use 8byte alignment
- fix internal linux headers
Full logs
https://git.musl-libc.org/cgit/musl/log/?qt=range&q=9cad27a3dc1a4eb349b6591e4dc8cc89dce32277..1ad8138819ced49851e618c9c063aa0ffc86718c
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The locale code uses the archive location in two places, ensure both are
corrected to use the environment variable which avoids nasty build
failures when archiving locales in images.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
glibc needs make >= 4 yet some of our build workers have older versions of
make. Add a make-native dependency to work around this until all our supported
distros have a recent version of make.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop packaging libcrypt from 2.28+ onwards
We have independent crypt implementation coming from libxcrypt
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
license update: Remove CDDL code with Public Domain pieces
https://github.com/besser82/libxcrypt/commit/c76847e3be40c4ac0d78bc8518502418c6207144#diff-fdcb2380ff1eeea2e5795ec115ba1c0d
inherit pkgconfig as it uses pkg-config during build
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
virtual/crypt for musl will come from libc itself
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
License-Update: libidn is dropped from glibc and a testcase that was a particular contributor copyrighted
see
https://sourceware.org/git/?p=glibc.git;a=blobdiff;f=LICENSES;h=0e3a9fe39b26e97038d92f904508a4c3aa1bb43b;hp=b29efe01084af28cc40953d7317f22927c0ee3b7;hb=5a357506659f9a00fcf5bc9c5d8fc676175c89a7;hpb=7279af007c420a9d5f88a6909d11e7cb712c16a4
https://sourceware.org/git/?p=glibc.git;a=blobdiff;f=LICENSES;h=b29efe01084af28cc40953d7317f22927c0ee3b7;hp=80f7f1487947f57815b9fe076fadc8c7f94eeb8e;hb=7f9f1ecb710eac4d65bb02785ddf288cac098323;hpb=5f7b841d3aebdccc2baed27cb4b22ddb08cd7c0c
Drop upstreamed and backported patches
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
configure tests crypt() existence with:
dnl We test for crypt() specially. On Linux (and others?) it resides in libcrypt
dnl but we don't want link all binaries to -lcrypt, just dropbear server.
dnl OS X doesn't need -lcrypt
AC_CHECK_FUNC(crypt, found_crypt_func=here)
AC_CHECK_LIB(crypt, crypt,
[
CRYPTLIB="-lcrypt"
found_crypt_func=here
])
AC_SUBST(CRYPTLIB)
if test "t$found_crypt_func" = there; then
AC_DEFINE(HAVE_CRYPT, 1, [crypt() function])
fi
but that silently fails with glibc-2.28 and a bit later do_compile fails with;
http://errors.yoctoproject.org/Errors/Details/185895/
../dropbear-2018.76/sysoptions.h:237:3: error: #error "DROPBEAR_SVR_PASSWORD_AUTH requires `crypt()'."
#error "DROPBEAR_SVR_PASSWORD_AUTH requires `crypt()'."
^~~~~
Add dependency on virtual/crypt so that do_configure detects it correctly.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|