Age | Commit message (Collapse) | Author |
|
This option isn't used and was dropped upstream in v240.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of spreading the ptest enabling over the recipe, just add a
PACKAGECONFIG to enable the installed tests. Whether this is enabled respects
PTEST_ENABLED by default, so it always disabled in native and nativesdk builds.
This means we can remove the conditional dependency on dbus, all the conditional
enabling of installed tests, and clean up EXTRA_OEMESON.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fix below error:
file /usr/include/bits/procfs-id.h conflicts between attempted installs of lib32-libc6-dev-2.29-r0.armv7vet2hf_vfp and libc6-dev-2.29-r0.aarch64
file /usr/include/bits/procfs.h conflicts between attempted installs of lib32-libc6-dev-2.29-r0.armv7vet2hf_vfp and libc6-dev-2.29-r0.aarch64
file /usr/include/bits/shmlba.h conflicts between attempted installs of lib32-libc6-dev-2.29-r0.armv7vet2hf_vfp and libc6-dev-2.29-r0.aarch64
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Building and running SELinux with musl works fine these days,
so don't disable it in the systemd bitbake file.
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We backported a patch to fix parallel build failure about version.h. But
that is not enough. We need one more patch to really fix this issue.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport patch to fix parallel build failure like below.
In file included from ../git/src/core/dbus-manager.c:10:
../git/src/basic/build.h:4:10: fatal error: version.h: No such file or directory
#include "version.h"
^~~~~~~~~~~
compilation terminated.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These patches were applied, hoping that they will eventually be accepted
upstream but they have been rejected, I think its best that they are
dropped so we can avoid novel unintended behaviours that no other
distros will be seeing
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have seen/reported few dlopen related fixes which has been fixed
upstream, therefore upgrade
all set of changes
https://git.musl-libc.org/cgit/musl/log/?qt=range&q=6516282d2adfad2c7e66d854cde3357120c75dbd..43e7efb46555f13a556d92944ac05c19b8929b60
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was added with no explanation in 2010 (17f3c548c) and doesn't appear to be
needed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We can assume that modern boards don't need X/Y/ZMODEM transfer tools for
testing purposes. The few users that need this tool for testing can add it
themselves.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A X/Y/ZMODEM transfer tool is not a required package for self-hosted builds.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Source /etc/default/timestamp if present. This allows the rootfs to be
read-only / store the file in a persistant location if the whole rootfs
is updated.
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following two patches are added because I cannot figure
out how to pass parameter to efi-cc if it's changed to be
an array value.
systemd/0001-Revert-meson-print-EFI-CC-configuration-nicely.patch
systemd/0001-Revert-meson-use-an-array-option-for-efi-cc.patch
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
PATCH REBASED:
==============
0001-binfmt-Don-t-install-dependency-links-at-install-tim.patch
0004-rules-whitelist-hd-devices.patch
0007-rules-watch-metadata-changes-in-ide-devices.patch
0001-Use-getenv-when-secure-versions-are-not-available.patch
0002-don-t-use-glibc-specific-qsort_r.patch
0004-add-fallback-parse_printf_format-implementation.patch
0006-src-basic-missing.h-check-for-missing-strndupa.patch
0007-Include-netinet-if_ether.h.patch
0008-don-t-fail-if-GLOB_BRACE-and-GLOB_ALTDIRFUNC-is-not-.patch
0009-add-missing-FTW_-macros-for-musl.patch
0012-fix-missing-of-__register_atfork-for-non-glibc-build.patch
0013-Use-uintmax_t-for-handling-rlim_t.patch
0014-fix-missing-ULONG_LONG_MAX-definition-in-case-of-mus.patch
0021-Hide-__start_BUS_ERROR_MAP-and-__stop_BUS_ERROR_MAP.patch
PATCH DROPPED:
==============
0005-Make-root-s-home-directory-configurable.patch
systemd has its hardcoded assumption about /home and /, and it also respects
$HOME environment var, so this patch is somehow useless. This patch was originally
added but in fact had no real runtime effect except messing up some hardcoded assumptions,
and it was accidently manipulated during systemd upgrade. We have in fact not
used the orignal patch for more than two releases and things were working out
well.
0006-remove-nobody-user-group-checking.patch
The issue has been fixed upstream by the following commit.
"check nobody user/group validity only when not cross compiling"
0008-Do-not-enable-nss-tests-if-nss-systemd-is-not-enable.patch
0009-nss-mymachines-Build-conditionally-when-ENABLE_MYHOS.patch
The issue has been fixed upstream by the following commit.
"meson: allow building resolved and machined without nss modules"
0001-login-use-parse_uid-when-unmounting-user-runtime-dir.patch
0001-sd-bus-make-BUS_DEFAULT_TIMEOUT-configurable.patch
Backport
0022-build-sys-Detect-whether-struct-statx-is-defined-in-.patch
Merged
0023-resolvconf-fixes-for-the-compatibility-interface.patch
0001-core-when-deserializing-state-always-use-read_line-L.patch
0001-chown-recursive-let-s-rework-the-recursive-logic-to-.patch
0001-dhcp6-make-sure-we-have-enough-space-for-the-DHCP6-o.patch
0001-Revert-sysctl.d-request-ECN-on-both-in-and-outgoing-.patch
0001-timesync-changes-type-of-drift_freq-to-int64_t.patch
Backport
0001-sysctl-Don-t-pass-null-directive-argument-to-s.patch
0002-core-Fix-use-after-free-case-in-load_from_path.patch
Merged
0001-meson-rename-Ddebug-to-Ddebug-extra.patch
0024-journald-do-not-store-the-iovec-entry-for-process-co.patch
0025-journald-set-a-limit-on-the-number-of-fields.patch
0026-journal-fix-out-of-bounds-read-CVE-2018-16866.patch
CVE-2019-6454.patch
sd-bus-if-we-receive-an-invalid-dbus-message-ignore-.patch
0005-basic-user-util-properly-protect-use-of-gshadow.patch
0022-Use-if-instead-of-ifdef-for-ENABLE_GSHADOW.patch
Backport
0001-Remove-fstack-protector-flags-to-workaround-musl-bui.patch
No build failure for qemux86/qemuppc + musl
PATCH ADDED:
============
0020-missing_type.h-add-__compar_d_fn_t-definition.patch
0021-avoid-redefinition-of-prctl_mm_map-structure.patch
0022-include-sys-wait.h-to-avoid-compile-failure.patch
0023-socket-util.h-include-string.h.patch
0024-test-json.c-define-M_PIl.patch
0001-do-not-disable-buffer-in-writing-files.patch
PATCH OTHERS:
=============
0003-comparison_fn_t-is-glibc-specific-use-raw-signature-.patch
0011-src-basic-missing.h-check-for-missing-__compar_fn_t-.patch
are combined into one patch:
0003-missing_type.h-add-__compare_fn_t-and-comparison_fn_.patch
Add two more PACKAGECONFIG, nss-mymachines and nss-resolve which are introduced
by the following commit.
meson: allow building resolved and machined without nss modules
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Simplify make-image-header.sh call and make sure it gets called in
the current working directory. Also check the return value of the
function call.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since compiler does not optimize away a lot of stuff we end up with
Werrors e.g.
./sysdeps/ieee754/flt-32/s_log1pf.c: In function '__log1pf':
../sysdeps/ieee754/flt-32/s_log1pf.c:114:22: error: 'c' may be used uninitialized in this function [-Werror=maybe-uninitialized]
114 | + (k * ln2_lo + c))) - f);
| ~~~~~~~~~~~~^~~~
which otherwise wont happen, so lets build with warnings-as-errors
disabled in debug mode
given we disable werror, now we don't have to restrict user to compile
without -O0
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have been duplicating few variables in glibc recipes which could
actually be defined once, therefore move them to glibc-common.inc which is
included by all glibc family of recipes
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update RCONFLICTS and RREPLACES for util-linux to fix 'multilib' qa issue:
| ERROR: lib32-util-linux-2.32.1-r0 do_package: QA Issue: lib32-util-linux
package lib32-util-linux-blkid - suspicious values 'e2fsprogs-blkid' in
RREPLACES [multilib]
| ERROR: lib32-util-linux-2.32.1-r0 do_package: QA Issue: lib32-util-linux
package lib32-util-linux-blkid - suspicious values 'e2fsprogs-blkid' in
RCONFLICTS [multilib]
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After eglibc was merged into glibc, Kconfig support was also dropped so
these libc features therefore are not effective anymore and can be
removed
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The rationale is to streamline the overall build.
The system parts are only needed to run target images, and so can be
built towards the end of the build process. At the same time, the
system parts may need gtk+-native and mesa-native which add significantly
to the build time.
On the other hand, the usermode parts have almost no dependencies
and can be built quickly. They are needed at recipes build time to
run target binaries, and so are required quite early in the typical
build process.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The AArch64 little-endian ABI requires that the dynamic loader is always
available at /lib/ld-linux-aarch64.so.1. Similarly, the big-endian ABI
requires that the dynamic loader is always available at
/lib/ld-linux-aarch64_be.so.1.
glibc-package.inc contains code that tries to ensure this, but
unfortunately it is defeated by the combination of multilib and usrmerge
because it does not take into account that /lib is the same as /usr/lib
with usrmerge when it adds the loader path to libc_baselibs and when it
attempts to show that /usr/lib is empty in do_poststash_install_cleanup.
This results in the symlink not being included in the package and a build
failure due to rmdir failing.
Richard Purdie also suggested[1] that ${nonarch_base_libdir} should not be
used as a synonym for /lib in this case.
This hopefully-fixed version always sets ARCH_DYNAMIC_LOADER and then uses
${root_prefix}/lib/${ARCH_DYNAMIC_LOADER} to refer to the dynamic loader
which works with both multilib and usrmerge. Since ARCH_DYNAMIC_LOADER is
only non-empty if the symlink is required, the code to create it can move
to do_install_append. Then do_poststash_install_cleanup needs to be taught
that ${exec_prefix}/lib may not be empty if the dynamic loader symlink is
there.
It appears not to be possible to specify the name of the loader via a
variable with an override, since the _aarch64 override is applied even for
_aarch64-be, so I've set the loader name using ${TARGET_ARCH} instead.
Build-tested and inspected core-image-minimal rootfs with:
* AArch64 no multilib (real loader in correct place)
MACHINE = "qemuarm64"
* AArch64 multilib (symlink in correct place)
MACHINE = "qemuarm64"
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "armv7at-neon"
require conf/multilib.conf
* AArch64 usrmerge (real loader in correct place)
DISTRO_FEATURES += "usrmerge"
MACHINE = "qemuarm64"
* AArch64 multilib usrmerge (symlink in correct place)
DISTRO_FEATURES += "usrmerge"
MACHINE = "qemuarm64"
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "armv7at-neon"
require conf/multilib.conf
* big-endian versions of all of the above by also setting
DEFAULTTUNE = "aarch64_be".
(building glibc only.)
* x86_64 (real loader in /lib as before)[2]
MACHINE = "qemux86"
* x86_64 multilib (real loader in /lib64 as before)
MACHINE="qemux86-64"
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "x86"
require conf/multilib.conf
I also tested leaving an unwanted file in ${exec_prefix}/lib for
do_poststash_install_cleanup to detect, and I believe the detection always
worked correctly.
[1] http://lists.openembedded.org/pipermail/openembedded-core/2018-November/276120.html
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To avoid conflicts with other forks of glibc remove the diff from the
ChangeLog.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
https://git.musl-libc.org/cgit/musl/log/?qt=range&q=1691b23955590d1eb66a11158fdd91c86337e886..6516282d2adfad2c7e66d854cde3357120c75dbd
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use commit 4f07ffa8f5ab ("Use #if instead of #ifdef for ENABLE_GSHADOW")
from upstream to check ENABLE_GSHADOW correctly that is defined as 0
in case of musl.
While there replace specific patch with one from upstream that does
exactly the same commit 66a5b5ce9b99 ("basic/user-util: properly protect
use of gshadow").
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
PRINTF settings no longer seem necessary (tested with mingw).
Add meson-specific bits to Enable-more-tests-while-cross-compiling.patch and
0001-Install-gio-querymodules-as-libexec_PROGRAM.patch
Add 0001-Set-host_machine-correctly-when-building-with-mingw3.patch
to allow 'mingw32' as target machine in addition to 'windows'.
Add 0001-meson.build-do-not-hardcode-linux-as-the-host-system.patch to
correct ARM build errors.
Drop configure-libtool.patch (autotools-specific).
Fix API docs generation
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 1.29.3 -> 1.30.1 upgrade lost support for sleep with
float values (e.g. "sleep 0.1") since this replacement for
CONFIG_FEATURE_FLOAT_SLEEP (enabled in thud) was missing.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Apply patches from systemd_239-7ubuntu10.8 to fix CVE-2019-6454.
CVE-2019-6454 is an issue in which systemd (PID1) can be crashed with a
specially formed D-Bus message.
For information see:
https://usn.ubuntu.com/3891-1/
https://git.launchpad.net/ubuntu/+source/systemd/commit/?id=f8e75d5634904c8e672658856508c3a02f349adb
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Autotools support has been removed upstream, so migrate recipe to
meson. For changes, see:
https://gitlab.gnome.org/GNOME/glib-networking/blob/glib-2-58/NEWS
* Remove unsupported configure options: pkcs11, ca-certificates. See:
https://bugzilla.gnome.org/show_bug.cgi?id=793281
https://bugzilla.gnome.org/show_bug.cgi?id=753260
License-Update: Change to LGPLv2.1
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Backport the CVE patch from the upstream
commit 3f635fb43389b54f682fc9ed2acc0b2aaf4a923d
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Volatiles processing now handles bind mounts, so update the comment in
the core file to indicate this.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This cleans up the handling of the dependency and gets rid of a use of
remove which should never be needed in OE-Core.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- update to last stable version 1.30.1
- remove and refresh already merged patches
- re-generate defconfig
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This recipe is special and recursively references poky, the AUH should
ignore it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we fix native RDEPENDS handling, it exposes a problem where there
is a circular dependency between shared-mime-utils and glib-2.0-native.
Break this dependency in the -native case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids errors when running populate_sdk under opkg:
* Problem 1/1:
* - package busybox-dev-1.30.1-r0.core2-64 requires busybox = 1.30.1-r0, but none of the providers can be installed
*
* Solution 1:
* - allow deinstallation of target-sdk-provides-dummy-1.0-r0.sdk-provides-dummy-target
* Solution 2:
* - do not ask to install a package providing busybox-dev
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* For changes, see:
https://gitlab.gnome.org/GNOME/glib/blob/glib-2-58/NEWS
* Upstreamed patch removed: date-lt.patch
* Tweaked another to remove a hunk trying to find a binary from
glib-2.0-native which isn't needed anymore as the code is in python
now.
* Add locale-base-pl-pl to RDEPENDS for ptest as the fix has been
resolved and merged.
* Remove libdir INSANE_SKIP for ptest package. The only libs present
here are in libexecdir which is allowed by the check.
* Revert an upstream patch for now that had changed the behavior of
pkg-config files to use absolute paths which results in build failures.
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It looks like there is an implicit dependency on util-linux'
umount - as otherwise when using busybox' umount we see a
long delay on shutdown / reboot.
[YOCTO #13058]
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These tests are very old, unmaintained, and there are far better tools to
exercise video codepaths now.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* use ${PN} instead of util-linux
* use PACKAGESPLITFUNCS for creating util-linux-lib* packages
rather than an _append OVERRIDE
* sort ALTERNATIVE_LINK_NAME alphabetically
* use systemd_system_unitdir instead of open-coding
* inherit manpages so as to benefit from man-db processing (note
that manpages are not generated here, we just want the
automatic update of the package index caches
* use EXTRA_OEMAKE instead of duplicating command line arguments
[YOCTO #13058]
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ptest executes all the binaries, so they really need to be available
in the file system.
[YOCTO #13058]
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This should probably be there and now the main package is a real
meta-package only.
[YOCTO #13058]
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The util-linux meta-package now simply RRECOMMENDS all
subpackages created. There is no distinction between what
it previously recommended or depended on for existing
packages.
This is to streamline the dependencies and to make things
less surprising.
It also stops the -dev package from depending on non-existing
packages like util-linux-losetup-dev etc.
[YOCTO #13058]
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|