aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-core
AgeCommit message (Collapse)Author
2013-05-08udev: do not recommend udev-extraconfAndreas Müller
same as already sent by Koen Kooi [1] [1] http://patches.openembedded.org/patch/48183/ Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-08systemd: do not recommend udev-extraconf for udevAndreas Müller
* adding this extra functionality is an image- or distro-decision * at least automount-rule/script breaks other automount solutions causing misleading kernel messages as 'VFS: could not find a valid V7 on sda' same as already sent by Koen Kooi [1] [1] http://patches.openembedded.org/patch/48139/ Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-02netbase: upgrade to 5.1Cristian Iorga
netbase dir has generic content, hence the name change; Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-02systemd-serialgetty: change to handle SERIAL_CONSOLESPaul Eggleton
SERIAL_CONSOLES is now set from SERIAL_CONSOLE if not already set. This is a little bit gnarly because we have to create a separate service file for each different baud rate; assume that the first baud rate is the default, thus preserving the previous behaviour in the event there is only one baud rate in use. This change also installs the service file before modifying it in place, allowing do_install to re-execute properly; additionally the service file now has the correct permissions (i.e. no execute bit set). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-02sysvinit-inittab: remove specific handling of SERIAL_CONSOLEPaul Eggleton
We already handle SERIAL_CONSOLES here and this is now set from SERIAL_CONSOLE if not already set. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-02sysvinit-inittab: ensure unique label for SERIAL_CONSOLES entriesPaul Eggleton
The label field in /etc/inittab entries needs to be unique, and the numeric label being used for the SERIAL_CONSOLES getty entries was clashing with the entries added for standard ttyX entries added via SYSVINIT_ENABLED_GETTYS. Use the part after "tty" in the device name (which is what the comment further down explicitly says should be done) as the label rather than a simple incrementing number. Fixes [YOCTO #4374]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29build-appliance: Add version infoSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29glib-networking: Update to 2.36Saul Wold
COPYING file: Address and Formating changes only Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29glib-2.0: Update to 2.36Saul Wold
Remove automake patch that is now correctly supported upstream Codegen files have moved to glib-2.0, so correct packaging and removal. Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29glib: Add --disable-man to configure argumentsPhil Blundell
Without this, glib will probe for the existence of xsltproc and use that to decide whether or not it wants to generate manpages. This has two consequences, neither of them good: a) the result of the build will vary depending on whether xsltproc happens to be installed in either the native sysroot or the host environment; and b) if xsltproc does happen to be installed but docbook-xsl isn't, the build will fail with "I/O error" messages. Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29gettext: Make ncurses dependency conditional on PACKAGECONFIG[msgcat-curses]Phil Blundell
According to the documentation, the only reason for needing ncurses is to support colour output from msgcat. Make this optional so that ncurses doesn't need to be built if colour output is not required. Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29dropbear: update to 2013.58Eric Bénard
- patches updated - nopw-option.patch dropped as the option is integrated since 2013.56 - compile tested for ARMv5 target Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29eglibc: Avoid "installed but not shipped" warning for ld.so.confPhil Blundell
If USE_LDCONFIG is not set then we won't ship ld.so.conf. However, eglibc still installs it which leads to a QA warning. Prevent that by removing the file (and the subsequently-empty directory /etc) in this situation. Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29systemd-systemctl: parse unit files more correctlyEnrico Scholz
Old script failed to parse unit files containing comments like | #Alias=some-alias or whitespaces like | WantedBy = foo correctly. Patch changes script to interpret keywords only when they are at the beginning of a line and ignores whitespaces before the '='. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29external-sourcery-toolchain: add SUMMARYPaul Eggleton
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29readline: add SUMMARYPaul Eggleton
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29libcgroup: add SUMMARY and better DESCRIPTIONPaul Eggleton
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29build-appliance-image: add SUMMARY, HOMEPAGE and improve DESCRIPTIONPaul Eggleton
Move the link from DESCRIPTION to HOMEPAGE and add a short SUMMARY. Also move IMAGE_INSTALL line to be further down in the recipe. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29gettext-minimal-native: add SUMMARY and DESCRIPTIONPaul Eggleton
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-29eglibc: add common HOMEPAGE and SUMMARY for eglibc-localePaul Eggleton
Add SUMMARY for eglibc-locale, and HOMEPAGE in eglibc-collateral.inc (used for eglibc-locale and eglibc-mtrace). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-28udev: create /var/volatile/tmp to avoid dead linkChen Qi
If it's not first boot, /tmp has already been symlinked to /var/volatile/tmp. But the udev service starts before populate-volatile.sh starts. This leads to a dead link at /tmp. As a result, trying to create any file under /tmp will fail. If a USB is plugged in before the populate-volatile.sh script starts, the /tmp/.automount-$name file will not be created correctly. As a result, when the USB is unplugged, the /media/$name directory is not removed. So we create /var/volatile/tmp directory in the udev script to avoid this dead link problem. [YOCTO #3404] Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-28udev-extraconf: Avoid mounting unknown filesystemsOtavio Salvador
Depending on kernel version used, the system can hung when trying to mount the extended partition (not the logical one) as it is a holder for other partitions and does not have a filesystem in it. To avoid this to happen we just mount partitions when these are using known filesystems so it does not try to mount a partition for an unsupported filesystem. Reported-by: Vladan Jovanovic <vladan.jovanovic@gmail.com> Reported-by: Leonardo Sandoval Gonzalez <b42214@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Vladan Jovanovic <vladan.jovanovic@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-04-22glib-2.0: disable tests for native builds, and respect ptest for LSBRoss Burton
Without disabling the tests in the native build, glib-2.0-native will need libdbus-native to be present. As we don't run the tests, disable them so we don't have build failures due to missing dependencies. Also, the LSB override was missing PTEST_CONF so the same problem could happen. After adding PTEST_CONF the LSB override is identical to the non-overridden EXTRA_OECONF, so remove it. Finally, to be explicit, put --enable-module-tests in PTEST_CONF. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18build-appliance: Update to latest dylan revision for releaseRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18systemd: depend on libgcryptEnrico Scholz
Although libgcrypt support is optional, its development files are are always required to expand AM_PATH_LIBGCRYPT. Build might fails else with | libtoolize: copying file `m4/lt~obsolete.m4' | configure.ac:446: warning: macro 'AM_PATH_LIBGCRYPT' not found in library | ... | configure.ac:446: error: possibly undefined macro: AM_PATH_LIBGCRYPT | autoreconf: .../autoconf failed with exit status: 1 | + bbfatal 'autoreconf execution failed.' | + echo 'ERROR: autoreconf execution failed.' Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18udev: disable systemd supportRoss Burton
If we want systemd support we use systemd's udev, so disable systemd support in this udev to avoid packaging the unit files. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18udev: drop dependency on udev in libudevRoss Burton
libudev previously depended on udev, but this causes problems with multilib if the user wants to install two variants of libudev as they'll pull in two variants of udev, which will conflict. Instead, remove the dependency and rely that the image pulls in udev in some way, such as the commonly used packagegroup-core-boot. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18psplash: Fix multilib buildRichard Purdie
The update-alternatives for multilibs are broken and nothing provides psplash in a multilib build. This fixes the multilib code. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18build-appliance: Update revision to dylan releaseRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18systemd: Fix udevd init script so sysvinit in systemd mode worksRichard Purdie
Commit http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=f76d4b3549ca220fa4bf84db2756ab45e11d06a3 moved volatiles handling for /run to the udev code only. This breaks sysvinit+systemd combined systems when building sysvinit images. This patch hacks the udevd init script in systemd to provide the missing symlink allowing the sysvinit images built with udevd from systemd to work correctly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18util-linux: fix systemd service in multilibRoss Burton
Use ${PN} when specifing service files so that they continue to get packaged with multilib. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18systemd: fix -dbg package with multilibRoss Burton
When libdir isn't /lib the files that are in nonarch_base_libdir were being left out of the -dbg package. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18busybox: hard-code the syslog service fileRoss Burton
Previously this was using ${PN}-syslog.service, which changes with multilib. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18udev: explicitly package nonarch_base_libdirRoss Burton
When using multilib this doesn't get caught by the default FILES_${PN}, so add it. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-18systemd: Effectively revert the move to /sbinRoss Burton
This effectively reverts the move systemd's libexecdir to /sbin. This caused too many issues in other places and was not well enough tested this close to release. Rather than use base_libdir, the nonarch version is used to try and give some chance of multilib not being totally broken in the release. Also some variables are used that mirror the systemd build system to reduce the risk of using variables that "work" in the general case but will break with multilib. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-17systemd: fix out of tree buildsRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-17udev: remove explicit path to udevadmRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-17udev: Effectively revert the move to /sbinRichard Purdie
This effectively reverts the changes made in b49ddeb11c0319b7ece278fd7cef6b0223114ca9 to move udev's libexecdir to sbin. The changes caused too many issues in other places and were not well enough tested this close to a release. Rather than use base_libdir, the nonarch version is used to try and give some chance of multilib not being totally broken in the release. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-17busybox: fix mount issueLaurentiu Palcu
When the mount command is not given the filesystem type to mount, then it will try all the known filesystems. However, when a filesystem is not supported by the kernel, the mount function call will return ENODEV. The following patch, ecd90bc6aa63da2aef2513ac090d4b426b2b719c, introduced a problem because it bailed out on ENODEV too. Instead it should have only bailed out on ENOMEDIUM. [YOCTO #4308] Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-16systemd: Fix shell variable assignment spacingRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-16systemd: use AC_CHECK_TOOL instead of AC_PATH_TOOL when checking objcopy, ↵Martin Jansa
strings, gperf * with external toolchain I have different HOST_PREFIX and HOST_SYS AC_PATH_TOOL is using HOST_SYS as prefix and fails to find objcopy then it tries objcopy without prefix which is found on host, but that objcopy does not work for arm libs * with internal toolchain gperf is not prefixed with HOST_PREFIX, but fallback to "gperf" only finds the one in native sysroot first * based on http://lists.linuxtogo.org/pipermail/openembedded-core/2013-April/037985.html Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-16initramfs-live-install*: fix the "install" boot optionNitin A Kamble
The install boot option was giving the following error when one tried to install the live image on a permanent storage of a BSP. cat: write error Invalid argument Installation image failed sh: can't access tty: job control turned off Further digging into the issue, found out that the install script was trying to do this: cat /proc/mounts > /etc/mtab And in the base-files recipe the /etc/mtab is made soft link to /proc/mounts. So the cat command was failing to write on /etc/mtab. As the contents of the /proc/mounts is already reflected in the /etc/mtab file due to the symlink-ing, there is no need for this step to recreate /etc/mtab in the install script. So just removing this unnecessary step, which solves the install issue of the live images. Fixes this bug: [YOCTO #4229] Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-15coreutils: add realpath to alternativesRoss Burton
New coreutils (8.15 onwards) build /usr/bin/realpath, which busybox also builds. Add it to the alternatives handling to avoid file conflicts. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-15initramfs-live-boot: explicitly depend on udev-extraconfRoss Burton
init-live.sh depends on udev performing automounting, which happens in udev-extraconf. Explicitly depend on it so that we always have it installed. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-15systemd: fix bootup with 'ro' by re-adding util-linux-mount to RDEPENDSKoen Kooi
When using busybox mount the filesystem won't get remounted as 'rw' and bootup will fail. This fixes the regression seen after switching from 'danny' to 'dylan'. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-15busybox: Add inetd related filesTing Liu
Add back inetd and inetd.conf files which are needed if CONFIG_INETD is enabled in the defconfig. Grabbed these files from oe-classic This patch is based on the previous patch for denzil: http://patches.openembedded.org/patch/33235/ Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-15busybox: detects customized configs when do_installTing Liu
After using 'bitbake -c menuconfig busybox' to customize defconfig, do_install fail to detect the changes. Grep configs in ${B}/.config instead of ${WORKDIR}/defconfig. Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-15allarch: Drop various problematic allarch usagesRichard Purdie
In each of these cases allarch is used where the package in question has a dependency on things which are not allach and change when MACHINE is changed. This leads to a rebuild of the package each time MACHINE is switched and the sstate checksum changes. The dependencies in question are not suited be being marked as ABISAFE. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-13udev-extraconf: Add -o silent to auto mount for mount.util-linuxSaul Wold
This will silence some of the noisy output from mount.util-linux and the kernel when trying to automount filesystems or devices. Busybox does not accept the silent option, it uses a loud option instead. [YOCTO #3935] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-13initrdscripts: look for new systemd-udevd locationRoss Burton
As per the previous commit, systemd-udevd is now in /sbin/systemd/. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-09-20 01:49:38 +0000