Age | Commit message (Collapse) | Author |
|
systemd by default tries to write the journal to /var/log/journal.
But base-files has a symlink /var/log -> /var/volatile/log. And
/var/volatile is a tmpfs mount in /etc/fstab.
If the journal service started before /var/volatile was mounted (which
was the typical scenario) then the journal would appear empty since
the old location was mounted over.
This change fixes the problem by ensuring that the journal doesn't start
until after the mount happens.
[Yocto #7388]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There were failures at boot from systemd-tmpfiles-setup.service due to
tmpfiles.d not honoring the ordering of entries in the files.
The patch here fixes the ordering issue which subsequently fixes the
failures on boot.
[Yocto #7393]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The AC_EGREP_CPP macro is looking for a 'yes' string that is likely
to be found in the path where the file is stored. This false positive
match causes variables to be mistakenly set.
The fix is to use a more elaborated string instead.
This has to be done at the configure and the configure.ac files, because
a reconfigure does not happen in the regular build flow.
[YOCTO #6614]
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Permission mode of directory /var/volatile/tmp should be 1777,
correct it.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Useful when we disable ldconfig in glibc, we need to be able to
turn it off in systemd too, otherwise systemd tries to launch
the service and it fails
Change-Id: I170307f809a13def0cafc282e88d4eafa0313c31
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
On systems where /var/log is not a volatile systemd-tmpfiles creates
duplicate ACL entries. This causes systemd-tmpfiles service to fail.
Also quietly ignore ACL settings on filesystems that don't support ACLs.
Backport the fixes from systemd master to fix these issues.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The condition should be uclibc 'or' musl then we know its not glibc
right now it checks with 'and' operator, that condition will never be
true
Change-Id: Ifc48e81fd0b3c18d8e1ef76a18c216dc6acda092
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If 'networkd' is enabled in PACKAGECONFIG, the do_install variable cannot
be correctly expanded. Error message is like below.
Failure expanding variable do_install: ShellSyntaxError: LexToken(Fi,'fi',0,0)
followed by:
LexToken(NEWLINE,'\n',0,0)
This patch fixes the above problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* it's not complete, but recipes depending on virtual/libx11 are easiest
to spot, I've long list of PNBLACKLIST for all recipes which cannot
be built in distro without x11 in DISTRO_FEATURES
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If PAM isn't enabled then systemd-tmpfiles on boot will fail to start with the
following error message:
Failed to copy files to /etc/pam.d: No such file or directory
This is because systemd-tmpfiles is attempting to build a usable /etc from the
skeleton in /usr/share/factory but pam.d isn't present because PAM is disabled.
Fix this by not attempting to copy pam.d in non-PAM configurations.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The check is supposed to be for -Os, but it's actually testing -O0.
Signed-off-by: Peter Urbanec <openembedded-devel@urbanec.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd has optional support for xkbcommon (verify keymaps when locale changes)
and iptables (configure NAT rules).
Add PACKAGECONFIG options for these, disabling iptables by default and
respecting the X11 DISTRO_FEATURE for libxkbcommon (as the code involves X11
keymaps).
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This dependency accidently disappeared in the 219 upgrade, so add it back.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
owl-video is a bad video player that doesn't work very well, use gst-player
instead for testing.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
219 has been in the docks for sometime, the older patch got merged
this patch is now upgrading 218 to 219
Make all patches using git
Change-Id: Ib0350144592aba26cad56c13c9a5522515915c58
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove upstreamed patches as well as patches which arent needed anymore
since features are dropped from systemd e.g. userspace firmware download
Tested on qemux86
Change-Id: Ic53aaad198998de146c3a7702ef17de871de9de6
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
systemd has a build-dependency on util-linux for libmount, and util-linux has an
optional build dependency on systemd.
The features in util-linux that enabling systemd gives you are:
* lslogins can show recent journal entries from the user
* uuidd can use socket activation and has a service file
* fstrim has a service file
* logger can write journal entries
These are not worth the overhead of maintaining two util-linux recipes to
bootstrap the cycle, so disable systemd support in util-linux.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we modify to use -Os
-Werror doesnt go well with it, glibc needs to be
cleaned up for that but until then lets disable -Werror
when using -Os
Also updates the options group patch to work better with -Os.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Given that bitbake.conf sets the default values:
BP = "${BPN}-${PV}"
S = "${WORKDIR}/${BP}"
there are a number of recipes that set the variable S completely
superfluously, so get rid of them.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using iproute2 to remove the route all default rules
will be removed. Scope the removal by interface like it is
done with ifconfig.
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Linux allows to install multiple default routes with
different metrics. Start with a metric above 0 to
allow other parts of the system to install routes
with a lower metric.
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Change the hostname logic the default value is ${MACHINE}, and explain how to
change it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This bbclass will create an SDK with a copy of bitbake and the metadata
and sstate for the target specified for the task. The idea is to let
"system" developers both work on applications and then test adding them
to an image without having to switch between workspaces or having to
download separate items.
Rather than running bitbake directly however, the primary way of running
builds within the extensible SDK is to use the "devtool" command. The
rest of the build system is fixed via locked shared state signatures,
and thus only the recipes you have added get built.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
uninative.bbclass uses -xjf for decompression so actually run the data
through bzip2.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We now can support musl along with uclibc and glibc
earlier when only alternative was uclibc this check was fine
but now we need to consider non-glibc vs glibc case instead of
uclibc vs glibc
Change-Id: Id794ce193c6557b5435002a8f9b6eb608738b696
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* this means that recipes with ARM_INSTRUCTION_SET explicitly changed
to arm will be built in feed without thumb suffix, the same does apply
for workdir, e.g. after "bitbake glib-2.0" you can see:
tmp-glibc/work/armv5e-oe-linux-gnueabi:
glib-2.0 glibc glibc-initial
tmp-glibc/work/armv5te-oe-linux-gnueabi:
acl db gdk-pixbuf kmod ....
and
tmp-glibc/deploy/ipk:
all armv5e armv5te qemuarm
* feed config should be ok, because all default DEFAULTTUNEs always
include "arm" variants of all supported PACKAGE_ARCHs
* for more details see
http://lists.openembedded.org/pipermail/openembedded-core/2014-April/091960.html
the toolchain path issues were resolved in 1.8
* add ARM_INSTRUCTION_SET = "arm" to glibc-collateral.inc and comment in
glibc.inc to fix glibc-locale and glibc-scripts build
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Drop CVE backports and ppc/fpu detection patch which is not needed anymore
Forward port eglibc option groups patch
Default to using glibc 2.21
Additional patches needed to appease -Werror option
Change-Id: I1873097cec8387ea9e8186a255122938fc28c976
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* Bump SRCREV/PV
* Drop PR
* Update SRC_URI md5sum/sha256sum
* Drop 0001-build-system-Specify-nostldlib-when-linking-to-.o-fi.patch
- applied upstream and available in 1.23.1 release
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As can be seen here:
http://lists.gnu.org/archive/html/coreutils/2014-11/msg00001.html
other people have run into the headache of trying to cross compile
coreutils, with the "help2man" problem (assumes host can run the
target binaries with "--help" arg to collect data for manpage.)
And since "current wisdom is this is working as intended" we are
largely left with no choice but to use the same solution and
abandon trying to generate the man pages at build time. So here
we import prebuilt manpages.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We had a couple patches to 1) deal with missing perl and 2) deal
with the perl-less "dummy" help2man fallout, but in the end, they
achieve no purpose whatsoever, since they just populate the doc
RPM with manpages like this one:
NAME
chmod - a GNU coreutils 8.22 program
DESCRIPTION
OOOPS! Due to the lack of perl on the build system, we were
unable to create a proper manual page for chmod.
As the above serves no purpose whatsoever, and since the concept
of running the binaries to capture the "--help" text output is
completely broken for cross compiles, lets just decouple man page
generation from the building of coreutils entirely so it paves the
way for importing pre-generated manpages.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
WARNING: QA Issue: coreutils: configure was passed unrecognised options: --disable-acl [unknown-configure-option]
It doesn't support --enable-acl or --disable-acl, use
ac_cv_header_acl_libacl_h to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
I used a for loop to build these packages more than 520 times, these
recipes never failed.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Setting "EDITOR=/bin/vi" breaks on non-busybox systems, as
vim will populate /usr/bin/vi instead, and you get stuff like:
op3:~/poky/meta-builder$ git commit -s
error: cannot run /bin/vi: No such file or directory
error: unable to start editor '/bin/vi'
Please supply the message using either -m or -F option.
op3:~/poky/meta-builder$ which vi
/usr/bin/vi
op3:~/poky/meta-builder$
Since we've already specified a proper path above in the profile,
we've no need to call out where in the path vi lives, and hence
this will work with busybox and a full vim install w/o busybox.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
ERROR: The recipe coreutils-native is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
tmp/sysroots/x86_64-linux/bin/kill
Matched in manifest-x86_64-util-linux-native.populate_sysroot
We have 8.23, so disable it rather than fix.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
The 'dot.profile' supplied by base-files calls 'mesg'. For simple
images using busybox e.g. core-image-minimal, this utility should be
available to avoid errors on login:
-sh: mesg: command not found
Provide mesg with busybox.
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Re-introduce
https://sourceware.org/git/?p=glibc.git;a=commit;h=fdbe8eae2b9aed74dabba1b0a189c5d7d61bf032
This patch was overzealously removed during option groups forward port
Change-Id: I8dd01902ae8e5ee8b5c6fc9dc39c7216952dca51
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This recipe was not usable as-is. A much better way of configuring package feeds
for opkg is provided by the distro-feed-config recipe in meta-oe.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
|
|
Fix systemd-timesyncd assertion
when networkd is disabled then we now do not
create /run/systemd/netif/links but timesyncd needs it. So lets
manually create this file when networkd is disabled so timesyncd
can still function
When enabling systemd-timesyncd we need systemd-timesync user
Backport patches to enable timesyncd when resolved and networkd
are disabled
replace the resolv.conf symlinink patch with a proper backport
Change-Id: I53f1a53eec4e4a4dbdfb7e8cd155d544ee5d81ec
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
modprobe,rmmod: reject module names with slashes
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed:
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/b/base-passwd/base-passwd_3.5.29.tar.gz, attempting MIRRORS if available
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Build Appliance includes a more recent
version of poky, up to commit:
afe85485fe185b663a1285b5c27de3160bf06cf7.
Fixes [YOCTO #7228].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|