| Age | Commit message (Collapse) | Author |
|---|
|
Fix handling of escape characters in regexs and hence fix python
Deprecation warnings which will be problematic in python 3.8.
Note that some show up as:
"""
meta/classes/package.bbclass:1293: DeprecationWarning: invalid escape sequence \.
"""
where the problem isn't on 1293 in package.bbclass but in some _prepend to a
package.bbclass function in a different file like mesa.inc, often from
do_package_split() calls.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For systems that don't otherwise depend on the full
util-linux package, blkdiscard is a mere 18k (on
cortexa7t2hf-neon).
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These are also provided by toybox in its default configuration,
and can be turned on in busybox.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The alternative setting for switch_root belongs to the util-linux-switch-root
package instead of the util-linux package. Fix this problem to avoid
a dangling symlink:
/usr/bin/switch_root-> /usr/bin/switch_root.util-linux
on target and in the sdk.
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The alternative setting for unshare belongs to the util-linux-unshare
package instead of the util-linux package. Fix this problem to avoid
a dead symlink /usr/bin/unshare -> /usr/bin/unshare.util-linux on target.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
busybox may also provide a fsfreeze and nsenter implementation,
so use u-a to allow installing them side by side.
If one installs both, busybox and util-linux, one gets the following error
(seen on a populate-sdk run):
| ERROR: Postinstall scriptlets of ['busybox'] have failed. If the intention is to defer them to first boot,
| then please place them into pkg_postinst_ontarget_${PN} ().
| Deferring to first boot via 'exit 1' is no longer supported.
And the coresponding do_populate_sdk extract:
| ...
| update-alternatives: Error: not linking ...sdk/image/usr/local/oecore-x86_64/sysroots/armv7at2hf-neon-angstrom-linux-gnueabi/usr/sbin/fsfreeze
| to /bin/busybox.nosuid /bin/busybox.nosuid since ...sdk/image/usr/local/oecore-x86_64/sysroots/armv7at2hf-neon-angstrom-linux-gnueabi/usr/sbin/fsfreeze
| exists and is not a link
| ...
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Below commit has added the unshare to alternatives but did not fix the
packaging of the changed file.
,----[ Offending commit ]
| commit 147da8fe7458a38598845958cb358bb094eba57b
| Author: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
| Date: Thu Jul 5 11:57:19 2018 +0300
|
| util-linux.inc: add fallocate & unshare to alternatives
|
| These binaries can be provided by busybox triggering a conflict in
| do_rootfs so update-alternatives needs to know about them to properly
| create the symlinks.
|
| Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
| Signed-off-by: Ross Burton <ross.burton@intel.com>
`----
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fallocate was disabled for native/nativesdk in:
http://git.openembedded.org/openembedded-core/commit/?id=17f3c548caf4adec37c3bbb139aa6b3900419794
We have since added uninative support and better glibc handling for SDKs
so this difference can be dropped now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Because the util-linux_2.32.bb recipe explicitely disables fallocate
for nativesdk triggering build warnings:
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux:
alternative target (sdk/usr/bin/fallocate or sdk/usr/bin/fallocate.util-linux)
does not exist, skipping...
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux: NOT adding
alternative provide sdk/usr/bin/fallocate: sdk/usr/bin/fallocate.util-linux
does not exist
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux: alt_link ==
alt_target: sdk/usr/bin/fallocate == sdk/usr/bin/fallocate
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These binaries can be provided by busybox triggering a conflict in
do_rootfs so update-alternatives needs to know about them to properly
create the symlinks.
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
I hit
update-alternatives: Error: not linking [...]/rootfs/sbin/fstrim to /bin/busybox.nosuid since [...]/rootfs/sbin/fstrim exists and is not a link
The solution seems to be to tell the alternatives system that util-linux
can also provide fstrim.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It allows to run program with some namespaces unshared from parent.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
rfkill moved locations, update accordingly
refactored avoid_parallel_tests.patch
includes security fix:
CVE-2018-7738 (score: 7.2)
affects: < 2.32-rc1
see changelog for other bugfixes:
https://mirrors.edge.kernel.org/pub/linux/utils/util-linux/v2.32/v2.32-ChangeLog
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have a problem when for example, a glibc 2.27 based system builds some
library like libpopt-native and puts it into sstate then it is reused
on a pre glibc-2.27 system to build something which depends on popt like
rpm-native. This results in an error like:
recipe-sysroot-native/usr/lib/libpopt.so: undefined reference to `glob@GLIBC_2.27'
In the past we've had this problem with new symbols like getrandom and
getentropy, here its with a more complex symbol where there is an old
version and a newer version.
We've looked into various options, basically we cannot link against our
uninative libc/ld.so since we don't have the right headers or compiler
link libraries. The compiler doesn't allow you to switch in a new set
either, even if we did want to ship them. Shipping a complete compiler,
dev headers and libs also isn't an option.
On the other hand if we follow the ld man page, it does say:
"""
The reasons for allowing undefined symbol references in shared libraries
specified at link time are that:
- A shared library specified at link time may not be the same as the one
that is available at load time, so the symbol might actually be
resolvable at load time.
"""
which is exactly this case. By the time the binary runs, it will use
our uninative loader and libc and the symbol will be available.
Therefore we basically have a choice, we get weird intermittent bugs,
we drop uninative entirely, or we pass this option.
If we pass the option, we can drop the other workarounds too.
(From OE-Core rev: 75a62ede393bf6b4972390ef5290d50add19341a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fedora28[1] has decided to go ahead and use libxcrypt to replace libcrypt from glibc
despite the change not having merged into glibc upstream yet. This breaks the use of
uninative in OE on fedora28 since binaries there are now using new symbols only found
in libxcrypt. libxcrypt is meant to be backwards compatible with libcrypt but not the
reverse.
Since this will impact OE in the next release cycle, this changes nativesdk only
to use this new model and adds libxcrypt to work in that case. This allows us to
build a uninative which is compatible with fedora28 and previous other OSes.
In order to work, recipes will now need to depend on virtual/crypt where they use
libcrypt since its now a separate library and we can't depend on it from glibc to
preseve backwards compatibility since glibc needs to build first. For now, only the
problematic nativesdk recipes have been fixed up. For target use, the default
provider remains glibc for now. Assuming this change is merged into upstream glibc,
we will need to roll this change out for the target but we will do this in the next
release cycle when we can better deal with the resulting bugs.
[1] https://fedoraproject.org/wiki/Changes/Replace_glibc_libcrypt_with_libxcrypt
Original patch from Charles-Antoine Couret <charles-antoine.couret@essensium.com>,
tweaked by RP to add virtual provides, SkipRecipe for libxcrypt and other minor
tweaks.
Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@essensium.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The patch tool will apply patches by default with "fuzz", which is where if the
hunk context isn't present but what is there is close enough, it will force the
patch in.
Whilst this is useful when there's just whitespace changes, when applied to
source it is possible for a patch applied with fuzz to produce broken code which
still compiles (see #10450). This is obviously bad.
We'd like to eventually have do_patch() rejecting any fuzz on these grounds. For
that to be realistic the existing patches with fuzz need to be rebased and
reviewed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
util-linux installs kill as ${base_bindir}/kill. coreutils installs kill as
${bindir}/kill. If base_bindir and bindir are the same (as they are in
meta-micro) then this causes a conflict for recipes that depend on
util-linux-native and coreutils-native.
This means that in the unlikely event that a recipe needs to run kill
during the build, it will need to depend on coreutils-native.
core-image-sato built successfully for me with this change.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The taskset command is provided by both busybox and util-linux.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If we have 'wifi' in distro feature, then busybox would have rfkill
enabled. And we would have the following do_rootfs failure if we
install both busybox and util-linux-rfkill.
Error: cannot register alternative rfkill to /usr/bin/rfkill since
it is already registered to /usr/sbin/rfkill.
There's another provider of rfkill in OE, that is rfkill recipe in meta-oe.
And it also registers rfkill to ${sbindir}/rfkill.
So change the register location of rfkill in util-linux to avoid
conflict with busybox and rfkill recipes.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The utility 'reset' is removed in this new version.
A new utility 'rfkill' is added in this new version.
Recipe is modified to remove reset and add rfkill according to the
above changes in new version.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The original code enabled only a sub-set of all available tests.
It also copied executables to be tested into a local folder although
the executables were expected to be already installed in the image.
In addition, the original code copied libtool scripts instead of already
cross-compiled images.
This patch modifies some test scripts so there is no need to copy
images already installed: instead it tests images already installed.
As the executables are scattered in /bin, usr/bin, /sbin/ usr/sbin folders,
we use 'which' to determine the absolute path.
We also copy some cross-compiled tests that were previously missing.
By the virtue of not copying the libtools scripts we also managed
the achieve binary reproducible package, as previously leaked build host
info was contained in libtool scripts, which are not copied anymore.
[YOCTO #10953]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Having only this utility is useful for tiny initramfs'es which don't
need the whole util-linux package (and neither the busybox binary
which is much bigger than switch_root) to do operations like decrypt
a rootfs & switch to it in the init file.
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For systems that don't otherwise depend on the full
util-linux package, ionice is a mere 31k (on mipsel).
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getrandom() is only available in glibc 2.25+ and uninative may relocate binaries
onto systems that don't have this function. For now, force the code to the older
codepath until we can come up with a better solution for this kind of issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"su -" == "su --login" was broken because it uses /etc/pam.d/su-l and
lacking that, falls back to /etc/pam.d/other which denies the
operation. The fix is to symlink "su-l" to the normal "su" pam config
file.
Because "su" usually comes from "shadow" and has been broken like this
without anyone noticing, it probably is not used much and thus should
be packaged separately so that it can be installed only when really
needed. For backwards compatibility, "util-linux" still pulls it in.
It is a bit strange that DISTRO_FEATURES are getting checked when
deciding whether the packages should be defined. It is not wrong, the
packages will be simply empty and thus probably not created when the
distro feature is on and the package config is off. Perhaps there is a
reason, so this is kept unchanged. The symlink however only gets
created when su.util-linux really gets built.
[YOCTO #11126]
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Drop uuid-test-error-api.patch as it's been fixed upstream differently:
https://github.com/karelzak/util-linux/commit/b770b487004778f4425639c7ed1bb6ca22d157bf
Drop ptest for tailf, as it got deprecated and removed:
https://github.com/karelzak/util-linux/commit/70ca1a77721b41f2355eeb00d4e55e13dba3e313
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Both shadow and util-linux packages provides 'nologin' binary in ${base_sbindir}
and ${sbindir} respectively, this leads to conflict when 'usrmerge' feature is
enabled, where ${sbindir} == ${base_sbindir}. Hance, handle this to alternative
system to resolve the conflict.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
package.
update-alternative.bbclass might rename the 'reset' binary when LINK_NAME ==
TARGET, This is true (${base_bindir} == ${bindir}) in 'usrmerge' distros.
Hence, suffix with * to properly package the renamed binary.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
|
|
Make sure fsck.cramfs is packaged before fsck so the latter
does not steal the fsck.cramfs binary when building with usrmerge.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
|
|
To fix:
file /usr/share/man/man1/eject.1 conflicts between attempted installs
of util-linux-doc-2.29.1-r0.core2_64 and eject-doc-2.1.5-r1.core2_64
and
file /usr/share/man/man1/logger.1 conflicts between attempted installs
of util-linux-doc-2.29.1-r0.core2_64 and inetutils-doc-1.9.4-r0.core2_64
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: b34dc23266e85006b9fdfcc1fdbc0d762f88cace)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Let util-linux-bash-completion depend on it, because it uses it.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upgrade util-linux from 2.28.1 to 2.29
(From OE-Core rev: a675e8219f09a92f1c9c9fccce449d0f0753a53f)
Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The su binary is handled by alternatives but the man page wasn't, so
installing both util-linux-doc and shadow-doc produces errors.
Also use d.expand() to neaten the code.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Disable building of mkfs.bfs, which is used to create
BFS file-systems used by SCO UnixWare. This is highly
unlikely to be utilized and there are otherwise no
references to 'bfs' throughout the rest of the tree.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable building of {mkfs,fsck}.minix, which are used
to support minix file-systems. Minix predates Linux and
support for its file-systems is unlikely to be needed.
No recipes otherwise reference minix, except in patches
to autotools configuration scripts, so there should be no
impact to other recipes.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Busybox doesn't provide a similar tool so having it in
a separate package allows to us it in addition to busybox without having
to include all of util-linux.
Before it was part of the top level util-linux package.
Now it is a separate package util-linux-prlimit but the top level package
still RRECOMMENDS it so for most users nothing should change.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Related patches are rebased.
util-linux-ng-2.16-mount_lock_path.patch is removed because there's
no _PATH_MOUNTED_LOCK in the latest codes.
util-linux-native.patch is removed because 2.28 version of util-linux
has taken mkostemp into consideration and provide fallback if mkostemp
fails.
avoid_unsupported_sleep_param.patch is removed and coreutils is added
as a runtime dependency to util-linux-ptest to solve the same problem.
avoid_unsupported_grep_opts.patch is removed and grep is added as a
runtime dependency to util-linux-ptest to solve the sanme problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously util-linux had a lower priority for hwclock than busybox but the
reasoning was lost in the mists of time, with just this enigmatic comment
remaining:
There seems to be problem, atleast on nslu2, with these, until they are
fixed the busybox ones have higher priority.
Chasing the comment back through history it first appeared in the following
oe-classic commit:
commit 5e01906b8433bc6a8c03be2e31758589641124c9
Author: David Karlstrom <daka@thg.se>
Date: Sat Jul 23 13:36:38 2005 +0000
Updated to use update-alternatives and fix some FHS bugs
Which doesn't really give a lot away.
Let's assume that in the past eleven years both hwclock and hardware have
improved, and restore util-linux's hwclock to it's intended priority.
[ YOCTO #9103 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow mountpoint to be installed separately from the rest of util-linux,
to conserve disk space, and to minimize the impact of switching to/from
this version of mountpoint.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=8de5315bd519c21a114bc88b88c6caff32831c03
changed util-linux priority to match busybox (50) which means sometimes
one and sometimes the other wins in image installs. We want util-linux to
win compared to busybox.
The old level (100) does conflict with other utils so pick 80 as a
good intermediate value.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Khem Raj
André Draszik
Dan McGregor
Randy MacLeod
Chen Qi
Max Krummenacher
Otavio Salvador
Ioan-Adrian Ratiu
Rasmus Villemoes
Armin Kuster
Ross Burton
Mike Crowe
Lars Persson
Juro Bystricky
Huang Qiyu
André Draszik
Patrick Ohly
Denys Dmytriyenko
Amarnath Valluri
Jussi Kukkonen
Paul Gortmaker
Peter Kjellerstedt
Andreas Oberritter
Zheng Ruoqin
Joshua Lock
Patrick Williams
Alexander Kanavin
Pascal Bach
Richard Tollerton