| Age | Commit message (Collapse) | Author |
|---|
|
In cases where a target image wants prevent the recovery partition is mounted
automatically, but the recovery partition identifier moves with the device
(internal flash, sd card, usb stick, ...), device/machine dependend extra
blacklists might be desired.
The grep utility prints the file name for each match when there is more
than one file to search. Add -h to suppress the prefixing of file names
on output.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds udev rule to unmount SD card partitions in case of improper
ejection from card reader.
When SD card is ejected from card reader without being unmounted
first, kernel does not generate a REMOVE event, instead it
generates a CHANGE event(only if polling is enabled
/sys/module/block/parameters/events_dfl_poll_msecs) and we don't
have any udev rule in automount.rules to handle this event,so
partitions never get unmounted. Unmounting of partitions can be
done if udev rules handle this CHANGE event.
Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com>
Signed-off-by: Yasir-Khan <yasir_khan@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The error was introduced by the following commit.
acfe3014d41de5e87cdbc58d0396349c6b9c3ffd
udev-extraconf: update mount.sh to use /run/media instead of /media
It accidently replaced 'device/media' by 'device/run/media' which causes
error for live images to be unable to boot up correctly, complaining
"Cannot find rootfs.img in /media/*".
This patch fixes the above problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is done to work around the issue of auto-mounting block devices
(i.e. SD cards) when root filesystem is still in read-only mode and
creating /media/<device> mount-points by udev is not possible. That
is due to udev (/etc/rcS.d/S03udev) getting started earlier than
checkroot (/etc/rcS.d/S10checkroot.sh) gets a chance to re-mount the
rootfs as read-write.
Although, canonical FHS specifies /media/<device> as a mount point
for removable media devices, the latest 2.3 version was released in
2004 and since then FreeDesktop/udisks and other tools adopted the
new /run/media/<user>/<device> location. That was done to overcome
read-only rootfs limitation, since /run is usually a tmpfs mounted
partition, plus avoid name-clash between users.
For our embedded systems environment we assume single-user operation
and hence simplify mount point to just /run/media/<device>. But for
proper per-user mounting to /run/media/<user>/<device>, some sort of
session management is required along with the tool like udisks, that
is out of scope of this simple udev-based auto-mounting.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This script was modified to check whether $ID_FS_TYPE is empty before
automount, however, for cdrom devices on qemu, the ID_FS_TYPE is not
set, yet the device should be mounted. Otherwise, when booting an iso
image with runqemu, the boot process hangs at 'waiting for removable
media'.
This patch fixes this problem by first checking whether the block device
is a cdrom.
[YOCTO #4487]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If filesystem type is vfat, change the ownership group to 'disk', and grant it
with w/r/x permissions.
The user which belongs to 'disk' group could write the storage.
[YOCTO #4004]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Do not mount /dev/dm-* by default via udev, this is the default
behavior for most distos and WRLinux4.x.
This resolved a problem with the sanity test failing due to seeing
the error while attempting to mount new logical volumes without fs.
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Depending on kernel version used, the system can hung when trying to
mount the extended partition (not the logical one) as it is a holder
for other partitions and does not have a filesystem in it.
To avoid this to happen we just mount partitions when these are using
known filesystems so it does not try to mount a partition for an
unsupported filesystem.
Reported-by: Vladan Jovanovic <vladan.jovanovic@gmail.com>
Reported-by: Leonardo Sandoval Gonzalez <b42214@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Vladan Jovanovic <vladan.jovanovic@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This will silence some of the noisy output from mount.util-linux and the kernel
when trying to automount filesystems or devices. Busybox does not accept the silent
option, it uses a loud option instead.
[YOCTO #3935]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes [YOCTO 4164](2/3)
Add all /dev/input/* devices to the input group with g+rw. This is
needed for rootless X without adding a security hole by making the
device o+rw.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Saul Wold <sgw@linux.intel.com>
Cc: Radu Moisan <radu.moisan@intel.com>
Cc: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The mount.sh handler attempts to prevent already-mounted filesystems
from being mounted as dynamic/removable "/media". But it misses the
case where the kernel has mounted the root filesystem (e.g. with
"root=/dev/sda1"). In that situation, /proc/mounts has a device name
of "/dev/root" instead of the proper $DEVNAME string exposed by udev.
So we must also test the root filesystem device number vs. the
$MAJOR/$MINOR udev tells us.
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Original recipe added by RP in fc128ab1e4fec27d44cebfa690a9bc233eda0caf
was saying GPL (later GPLv2)
* COPYING.GPL was added to reflect that
* Meta-oe has similar recipe with MIT license and even more scripts, so lets
change LICENSE here too
* Most code was derived from the meta-oe version or added to OE arguably
under MIT and the MIT license makes most sense here
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Move parts of local.rules from udev to udev-extraconf
* Move mount.sh and network.sh to udev-extraconf along with rule fragments
* Add mount.blacklist to CONFFILES
* Change PV to 1.0 and bump PR to provide upgrade path from meta-oe's udev-extra-rules
including RREPLACE/RPROVIDES/RCONFLICTS trio
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Qing He <qing.he@intel.com>
|
Jens Rehsack
Yasir-Khan
Chen Qi
Denys Dmytriyenko
Hongxu Jia
Jackie Huang
Otavio Salvador
Saul Wold
Darren Hart
Andy Ross
Martin Jansa
Qing He