| Age | Commit message (Collapse) | Author |
|---|
|
getty devices were not being removed in some cases because device name
was not at the end of the line, for example a ttyS1 device:
S1:12345:respawn:/bin/start_getty 115200 ttyS1 vt102
Removing this limitation allows sed to remove any line containing
the device.
(From OE-Core rev: 2e0b36981c1f91ed0d3d457c370df10a099407af)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This makes more sense than the default TERM=linux (as set
by the linux kernel).
In addition, when using busybox init, it tries to achieve
the same (in a different way).
Both agetty, and busybox getty support the terminal type as
the last argument.
(From OE-Core rev: a23004f32dda9310c7efc29720fa9c3027a7c329)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With some hardware the name of the device node and the name in
/proc/console differ. This causes SERIAL_CONSOLES_CHECK to not enable
working consoles in these cases. This patch changes SERIAL_CONSOLES_CHECK
to have an optional alias for the checked consoles. The new format is:
<device>:<alias to check(optional)>
Fixes [YOCTO #9440].
(From OE-Core rev: 91d9f3271c12fb755ab332637b17650d5fe75ce2)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current recipe creates inittab labels based off the device node name
of TTYs used as consoles. If those names exceed the 4 character label
limit of inittab, it will break. This change takes the last 4 chars of
the device names in order to avoid any errors.
[ YOCTO #9529 ]
(From OE-Core rev: 30acc7a6b9e6d1c42ba1df6e5a362d10b43cb4eb)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
util-linux has an alternative for it. Add it to sysvinit too.
(From OE-Core rev: 43069c2bd9947357970bd48504987bda514f5219)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
sysvinit is objectively less maintained than util-linux or busybox, each
of which may supply its own mountpoint implementation. Adjust the
ALTERNATIVE_PRIORITY to select the sysvinit implementation as the last
resort.
(From OE-Core rev: 92c6b896e3b11283e2c313e6a2ac3497a99a13a0)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When this file is in ${sysconfdir}/init.d, SELinux labels it as a generic
init script (initrc_t). This causes problms at runtime because SELinux
doesn't let the login process execute generic init script. Moving this
helper script to base_bindir results in it being labeled as a generic
binary (bin_t). Nearly every SELinux domain is allowed to execute
generic binaries and the login process is one of them.
(From OE-Core rev: 826bfea4b7018c7974ef388facc99ca70bb3654f)
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 8688f08e429dfbc758315f9f07933693269e7c5b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a wrapper script around getty to check if a given console exists, this
allows for multiple Console ttys to be specified for various boards without
having additional BSP types just for different console types.
[YOCTO #8689]
(From OE-Core rev: b93369a7943949f51057e0a704f5524ab7682fe6)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is due to specifying .h files on linker cmdline
clang driver is picky about it, and its not entirely correct
either
(From OE-Core rev: de45b5e68faeefe3d68818d456f280b98f397634)
(From OE-Core rev: 44dcee60e343944199ee766ec0886931ff2b0699)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On qemuarm64 the second serial port in SERIAL_CONSOLES will be hvc0.
Since that doesn't have tty in the name, a correct label didn't get
added to inittab.
This change makes both names with tty and without work.
(From OE-Core rev: 4cca92b34defae425929d92671edde621f8a5e80)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Similarly to systemd, only enable the recipe in builds where
sysvinit is configured in DISTRO_FEATURES. This allows the new
cleanup mechanism to handle it correctly in existing builds.
(From OE-Core rev: 7f85e74d5c53b34e5f470967fdbdbd19fed1929a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
SysVinit creates lastb as a symlink to last during the build.
Just as other applications may provide last, other applications
may provide lastb.
Add alternatives designations for lastb to avoid installation
conflicts with other applications.
(From OE-Core rev: c76270e55cf6db6c757690f4b8df8c95924bdcd7)
Signed-off-by: Bryan Evenson <bevenson@melinkcorp.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When switch to runlevel 1 (Single user mode), tty was not
re-spawn and appears to be a machine hang.
[YOCTO #5336]
(From OE-Core rev: f7c270d073d6f0d1e741e9850c599074ebe79db7)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After removal of auto-creating S we must ensure that all recipes are
using a proper value for S.
Fix all recipes that only need to set S equals to WORKDIR.
[YOCTO #5627]
(From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This aligns the params of getty with the ones used in Debian. From the
getty(8) manpage:
,----[ getty(8) manpage ]
| -L, --local-line
|
| Force the line to be a local line with no need for carrier
| detect. This can be useful when you have a locally attached
| terminal where the serial line does not set the carrier detect
| signal.
`----
Reported-by: Craig McQueen <craig.mcqueen@beamcommunications.com>
(From OE-Core rev: a899c362be71cb7b94bd318c57702446b017005c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Craig McQueen <craig.mcqueen@beamcommunications.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For certain swap/overcommit settings (e.g. when overcommit is disabled
on a real-time system), we need to limit the stack size used by
initscripts. When the STACK_SIZE environment variable is set (usually
in /etc/default/rcS), ulimit the stack size to the value specified.
Make the stack size ulimit a soft limit, which allows the user to
increase the stack size where required without having to run the
respective application as root.
(From OE-Core rev: 0b5db16929de7668174e74e428f3e4e90e76e1d8)
Signed-off-by: Scot Salmon <scot.salmon@ni.com>
Signed-off-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Acked-by: Rich Tollerton <rich.tollerton@ni.com>
Acked-by: Brad Mouring <brad.mouring@ni.com>
Acked-by: Bill Pittman <bill.pittman@ni.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bootlogd does not write to /var/log/boot if it does not exist,
so if using the volatiles facility (presumed to mount /var/log under a
tmpfs), ensure that /var/log/boot gets created.
(From OE-Core rev: 283d109098358c06ff10daaf612e5a244691d7ac)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bootlogd's default log rotation code on stop requires `savelog`, which
is in debianutils, which may not be installed. If it's not installed,
don't try to perform the log rotation.
That is: in the affected code block, `savelog` is what is responsible
for creating "boot.0". When `savelog` doesn't exist, an error message
gets printed on bootup to the effect of "mv: can't find boot.0".
(From OE-Core rev: 5c22973e1bf76615bcf57984ac7a30cf7d0766df)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The messages echoed when starting and stopping bootlogd are currently
printed regardless of the setting of VERBOSE. Adjust the initscript so
they're only printed when VERBOSE is enabled.
(From OE-Core rev: 42f107513148aa6e9fd69d51e63a183c613114c0)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* The SRC_URI is not accessible.
So need to add mirror site referred by the original site.
* The problem is that
http://download.savannah.gnu.org/releases redirects to closest mirror
and few mirrors (e.g. .jp) weren't working correctly while
http://download-mirror.savannah.gnu.org/releases/ seems to be reliable.
* Add SAVANNAH_GNU_MIRROR and SAVANNAH_NONGNU_MIRROR variable in bitbake.conf.
* Change the SRC_URI using the new variable.
(From OE-Core rev: af00b6544f60e4d7581f9d9767f9d3f574392359)
Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace:
cat <file> | grep xxx
By:
grep xxx <file>
(From OE-Core rev: 350c7c63c05a977158da91b4e06f84a6fb84a6ee)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 1a91d791a903ab837a7695cfe47828618b8be6a6)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
(From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fix the bootlogd init script header, to make chkconfig be able to work
on bootlogd
(From OE-Core rev: d1a7e5dbaa1217b692b46e2756c318e5aaa34f9d)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* resolves following warnings:
WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends)
WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends)
(From OE-Core rev: c6825ec6e92e20bb64a051d1576f363c16e98d68)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As sysvinit doesn't inherit update-rc.d, we need to add this dependency
manually.
(From OE-Core rev: 4ea9ca2bbacb20c3ed454b80e2c020c1073f3299)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of manually adding initscripts to RDEPENDS of each package,
we should make it automatically handled by the update-rc.d.bbclass.
This solution would have the benefit of backward compatibility. In
other words, users need not modify their recipes.
This reverts commit 16080a3485bd793edd66ed8361f1e8b86a9e19ea.
(From OE-Core rev: f9f193219bd510160b6b09bae652a9dc8ea01e7b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that the initscripts-functions has been packaged separately,
packages which may use the functions script should have a runtime
dependency on it.
(From OE-Core rev: 6690c12cb1977f6bf93f3eb6d471dbd7db81bf28)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Busybox also provides sulogin command, so we need to use the ALTERNATIVE
mechanism to manage it.
(From OE-Core rev: 8b3a799a87d18b1d113d59b3e7a681db5683e5f8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is an race condition where psplash is not quite exited before the unmount occurs
causing a umount: /mnt/.psplash: target is busy message to appear, it's ok to lazyily
unmount and not get this message
[YOCTO #5244]
(From OE-Core rev: 9ded366084f22f48ef72aa22acf6a38982d16d97)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, our system had no boot log even if the bootlogd daemon was
started correctly. The root cause is that the log file doesn't exist
when starting the bootlogd.
Add '-c' option to bootlogd so that it will create the boot log if
it doesn't exist.
[YOCTO #5273]
(From OE-Core rev: 6059be3ab60b8ab463d438c47bb17553d184a790)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the part after "tty" in the device name go into label along with
everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0"
than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100.
If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed.
(From OE-Core rev: b00b9ae5693e04cacd0843c12a529e7f3dc501ed)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It causes shadow to be used in core-image-minimal and increase the
size by 1.5M. We will add the shutdown user to group via base-passwd
which we depend upon instead.
[YOCTO #5230]
(From OE-Core rev: e33e4c30a4fa5b98903d6a46cdcc5bca9cf50848)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 'need' and 'provide' files are there for simpleinit compatability,
according to the comments in these two files.
However, we don't use simpleinit and there's even no simpleinit recipe
in OE. Besides, these two files are not installed.
This patch removes these two unused files.
(From OE-Core rev: 05ac5627208c98007cd4c7aed9d76f179cd974a9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix indentation in SRC_URI to conform to the indentation convention in OE.
(From OE-Core rev: e05e7016fac7c665a23865dce18b816e01dbd51e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 95180b966adb6ebe6451ab0e91187e7db93f22e4)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When reboot the system on lsb image, some kill processes would print the
following message:
...
pidof: invalid options on command line!
...
The killproc in lsbinitscripts invokes pidof with option -m, but the pidof
in sysvinit package doesn't support this.
Backport from fedora to add -m option on pidof could fix this issue.
[YOCTO #4896]
(From OE-Core rev: 8abe29811d9c5975fbd6483cb9c20b44904ae57f)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For this to happen:
* 'shutdown' group has been created;
* changed ownership group for /sbin/halt and /sbin/shutdown to 'shutdown';
* deny execution rights to other users except 'root' and those belonging
to 'shutdown' group;
* set setuid bit to both apps;
So, basically, in order for a normal user to be able to shutdown/reboot
the machine, it must be a member of 'shutdown' group.
Other changes:
* fixed identation for 2 lines that used spaces instead of tabs;
[YOCTO #4345]
(From OE-Core rev: b32d06fbe797cd39cc19f62bda8a698effe7c0ea)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We already handle SERIAL_CONSOLES here and this is now set from
SERIAL_CONSOLE if not already set.
(From OE-Core rev: 40acb88afb2ebd2d468bb2fce51c6ce6bf3d8403)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The label field in /etc/inittab entries needs to be unique, and the
numeric label being used for the SERIAL_CONSOLES getty entries was
clashing with the entries added for standard ttyX entries added via
SYSVINIT_ENABLED_GETTYS. Use the part after "tty" in the device name
(which is what the comment further down explicitly says should be done)
as the label rather than a simple incrementing number.
Fixes [YOCTO #4374].
(From OE-Core rev: 28d3202befcec72554885f8ea9cb7985523b89f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, psplash didn't go away at system startup.
The root cause is that rc checks the file '/etc/init.d/xserver-nodm' to
determine whether to exit psplash manually. So even if xserver-nodm is not
linked into runlevel 3, psplash doesn't exit.
This patch fixes this problem by letting the rc script check the file
'/etc/rc${runlevel}.d/S??xserver-nodm' to determine whether to exit psplash
manually.
[YOCTO #3904]
(From OE-Core rev: 70b14f1c4181d820e56e67f4a5d921905094dc62)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[ CQID: WIND00404316 ]
Use alternatives mechanism to prevent sysvlinux and util-linux
man pages from causing conflicts.
(From OE-Core rev: af97a79d017722d0571d552e390f2881efe228e2)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This variable indicates whether the rootfs is intended to be read-only
or not. Changing this value from 'no' to 'yes' on a currently running
system with read-write rootfs and rebooting will give the user a working
system with read-only rootfs.
However, it is not suggested to change its value. Normally, if a read-only
rootfs is required, we should build an image with 'read-only-rootfs' image
feature.
[YOCTO #3406]
(From OE-Core rev: 0b4af5f3e6c92ae8194447b027202c1933f47dd9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update-rc.d provides a cleaner interface for creating links for init scripts.
So we use update-rc.d to replace the redundant 'ln -sf xxx' statements.
[YOCTO #3708]
(From OE-Core rev: 66f3e3c15faedc9ee78532b4c59fa5d7148ddace)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(From OE-Core rev: 0eba0fad8d0e73cfbeab515b7796134967741b55)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make UTC variable in /etc/default/rcS has effect on hwclock.sh.
This variable declares whether the Hardware Clock is kept in UTC
or local time. Default its value to "yes" and change the comment.
[YOCTO #3341]
(From OE-Core rev: 2bda4bbda3f3033cfb324778ef88f2aedad4a83b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The kernel boot process hangs when /proc/consoles doesn't exists, therefore
check the existence of /proc/consoles before executing pkg_postinst script.
Following is the log when /proc/consoles doesn't exist:
Running postinst /etc/rpm-postinsts/102...
cat: /proc/consoles: No such file or directory
cat: /proc/consoles: No such file or directory
cat: /proc/consoles: No such file or directory
INIT: Entering runlevel: 5
Starting OpenBSD Secure Shell server: sshd
generating ssh RSA key...
generating ssh ECDSA key...
generating ssh DSA key...
done.
Starting network benchmark server: netserver.
Starting system log daemon...0
Starting kernel log daemon...0
Stopping Bootlog daemon: bootlogd.
INIT: no more processes left in this runlevel
(From OE-Core rev: 390e7f1f0b1b21d3c0787a6272583d5829561f95)
Signed-off-by: Zhenhua Luo <b19537@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
to check
Right now, we delay running the serial console checks to we boot up. This causes
issues for read only file systems. So, if have not configured any serial ports to
check via SERIAL_CONSOLES_CHECK we can skip the check at boot. This fixes any
issues with read only file systems and ipk packaging.
(From OE-Core rev: 019a95a5e01bd3fefaaab0a27029ed8b26ee3c79)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Leonardo Sandoval
André Draszik
California Sullivan
Stephano Cetola
Dan McGregor
Richard Tollerton
Philip Tricca
Khem Raj
Saul Wold
Randy Witt
Richard Purdie
Bryan Evenson
Aníbal Limón
Petter Mabäcker
Otavio Salvador
Scot Salmon
Changhyeok Bae
Matthieu Crapet
Chunrong Guo
Mike Looijmans
Roy Li
Martin Jansa
Chen Qi
Paul Eggleton
Muhammad Shakeel
Jackie Huang
Hongxu Jia
Laurentiu Palcu
Jeffrey C Honig
Zhenhua Luo
Matthew McClintock