| Age | Commit message (Collapse) | Author |
|---|
|
Ensure the task is properly regsistered as an sstate task as this
"half way" state confuses new code in bitbake and it isn't supported.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we have installed some lib32 package which depends on perl/bash,
then populating sdk for that image would fail with the following error.
Error:
Problem: package lib32-libxml-namespacesupport-perl-1.12-r0.corei7_32 requires lib32-perl, but none of the providers can be installed
package target-sdk-provides-dummy-1.0-r0.sdk_provides_dummy_target conflicts with /usr/bin/perl provided by lib32-perl-5.30.0-r0.corei7_32
package target-sdk-provides-dummy-1.0-r0.sdk_provides_dummy_target conflicts with libperl.so.5 provided by lib32-perl-5.30.0-r0.corei7_32
This could be produced by the following steps:
1. IMAGE_INSTALL_append = " lib32-valgrind"
2. bitbake core-image-minimal -c populate_sdk
We need to extend all packages in DUMMYPROVIDES to avoid such problems.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When https_proxy is set, use proxy opener to open CVE metadata and
database URLs, otherwise fallback to the urllib.request.urlopen.
Also fix a minor issue where the json database which has been gzip
decompressed as byte object should be decoded as utf-8 string as
expected by update_db.
Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the code fetches the compressed JSON, writes it to a temporary file,
uncompresses that with gzip and passes the fake file object to update_db().
Instead, uncompress the gzip'd data in memory and pass the JSON directly to
update_db().
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The metadata parser is fragile: first it coerces a bytes() to a str() (so the
string is b'LastModifiedDate:2019...'), assumes the first line is the date, and
then uses a regex to parse (which then includes the trailing quote as part of
the date).
Clean this up by parsing the bytes as UTF-8 (ASCII is probably fine, but this is
safer), iterate through the lines and split on colons to find the right
key/value pair.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of calling execute() repeatedly, rewrite the function to be a generator
and use executemany() for performance.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recipe was called -native but didn't inherit native.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
djb2 hash algorithm was found to do collisions, so the database was
sometime missing data. Remove this hash mechanism, clear and populate
elements from scratch in PRODUCTS table if the current year needs an
update.
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of using expanded list of affected versions that is not
reliable, use the 'cpe_match' node in the 'configurations' json node.
For cve-check to correctly match affected CVE, the sqlite database need to
contain operator_start, operator_end and the corresponding versions fields.
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_populate_cve_db is a native task.
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the NVD url is not accessible, print a warning on top of the CVE
report, and continue. The database will not be fully updated, but
cve_check can still run on the previous database.
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To be able to populate NVD database on a fetchall
(bitbake <image> --run-all=fetch), set the do_populate_cve_db task to be
executed before do_fetch.
Do not get CVE_CHECK_DB_DIR, CVE_CHECK_DB_FILE and CVE_CHECK_TMP_FILE
variable because do_populate_cve_db can be called in a context where
cve-check class is not loaded.
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With postgresql added to IMAGE_INSTALL, we will get the following
error when building for 64bit BSPs.
Problem: package postgresql-11.3-r0.corei7_64 requires libperl.so.5()(64bit), but none of the providers can be installed
A previous patch has added libperl.so.5 to DUMMY_PROVIDES, but this
is not enough. Because for 64bit BSP, it should also provide libperl.so.5()(64bit).
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If https_proxy environment variable is defined, manage proxy to be able
to download meta and json data feeds from https://nvd.nist.gov
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
urllib3 was used in this recipe but it was not set as a
dependency. As it is not specifically needed, rewrite the recipe with
urllib from the standard library.
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
cve-check-tool-native do_populate_cve_db task was using deprecated NVD
xml data feeds, cve-update-db uses NVD json data feeds.
Sqlite database schema was updated to take into account CVSSv3 CVE
scores and operator in affected product versions.
A new META table was added to store the last modification date of the
NVD json data feeds.
Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids sstate/uninative relocation issues where a binary was built against
a system with libcrypt.so.1 or libcrypt.so.2 and then run on the opposite by
ensuring both libraries are in uninative.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add libperl.so.5 to DUMMY_PROVIDES to avoid do_rootfs failure like
below.
Error:
Problem: package postgresql-11.3-r0.core2_32 requires libperl.so.5, but none of the providers can be installed
package target-sdk-provides-dummy-1.0-r0.sdk_provides_dummy_target conflicts with perl provided by perl-5.30.0-r0.core2_32
package target-sdk-provides-dummy-1.0-r0.sdk_provides_dummy_target conflicts with perl-module-strict provided by perl-5.30.0-r0.core2_32
This problem could be reproduced by add 'postgresql' to IMAGE_INSTALL
and then `bitbake core-image-minimal -c populate_sdk'.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Switch uninative to use xz compression instead of bzip2. We can then directly
use the SDK_ARCHIVE_CMD.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE-Core rev: 57a33048a89a422cfdc986d3489c67b2d297e1e7 renamed the tar_sdk function
but didn't fix this recipe. This leads to broken uninative tarballs as the internal
structure isn't correct. Fix this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It exists a situation that there is a common config file includes
multilib.conf but variable MULTILIBS is not set by default:
require conf/multilib.conf
MULTILIBS ?= ""
When build target-sdk-provides-dummy in a build project, it fails with
following steps:
1 $ echo 'MACHINE = "qemux86"' >>conf/local.conf
$ bitbake target-sdk-provides-dummy
2 $ cat <<EOF >>conf/local.conf
MACHINE = "qemux86-64"
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "i586"
EOF
$ bitbake target-sdk-provides-dummy
$ bitbake lib32-target-sdk-provides-dummy
It fails to build lib32-target-sdk-provides-dummy with error messages:
| ERROR: target-sdk-provides-dummy-1.0-r0 do_packagedata: The recipe target-sdk-provides-dummy
| is trying to install files into a shared area when those files already exist. Those files
| and their manifest location are:
| .../tmp/pkgdata/qemux86-64/lib32-target-sdk-provides-dummy
| (matched in manifest-qemux86_64-lib32-target-sdk-provides-dummy.packagedata)
| .../tmp/pkgdata/qemux86-64/runtime/lib32-target-sdk-provides-dummy
| (matched in manifest-qemux86_64-lib32-target-sdk-provides-dummy.packagedata)
| ... snip ...
| Please verify which recipe should provide the above files.
Add related directories to SSTATE_DUPWHITELIST to avoid the failures.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids errors when running populate_sdk under opkg:
* Problem 1/1:
* - package busybox-dev-1.30.1-r0.core2-64 requires busybox = 1.30.1-r0, but none of the providers can be installed
*
* Solution 1:
* - allow deinstallation of target-sdk-provides-dummy-1.0-r0.sdk-provides-dummy-target
* Solution 2:
* - do not ask to install a package providing busybox-dev
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When 'adduser' package, which is from meta-perl layer, is added to rootfs,
we will get do_populate_sdk failure like below.
Error:
Problem: package perl-module-cwd-5.24.4-r0.core2_64 requires perl-module-dynaloader, but none of the providers can be installed
- package perl-module-file-temp-5.24.4-r0.core2_64 requires perl-module-cwd, but none of the providers can be installed
- package perl-module-dynaloader-5.24.4-r0.core2_64 requires perl-module-config, but none of the providers can be installed
- package adduser-3.118-r0.core2_64 requires perl-module-file-temp, but none of the providers can be installed
- package target-sdk-provides-dummy-1.0-r0.sdk_provides_dummy_target conflicts with perl provided by perl-5.24.4-r0.core2_64
This is because adduser depends on some perl modules which are not
listed in target-sdk-provides-dummy.
So add these perl modules to avoid such failure.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
opkg needs the replaces/conflicts/provides in order for this package
to function as intended. When enabled, this code caused failures for
core-image-sato -c populate_sdk.
The reason is that nativesdk-autoconf has several perl dependencies. We
need to list more of the things which this package provides/conflicts
with in order for it to function correctly. Therefore add the missing
entries.
(From OE-Core rev: 27412b377dda47daa87bfcb3a41babe53ff8b0a3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fedora28 repackages rpcgen program to rpcgen
package and the program will no longer be
part of the glibc-common package.
fedora 28:
$ rpm -qf /usr/bin/rpcgen
rpcgen-1.3.1-4.fc28.x86_64
fedora 27:
$ rpm -qf /usr/bin/rpcgen
glibc-common-2.26-27.fc27.x86_64
Once build a project on fedora28 host without
installing the extra rpcgen package, there
comes below error:
ERROR: Unable to start bitbake server
ERROR: Last 10 lines of server log for this session (/yocto/builds/upgrade2/bitbake-cookerdaemon.log):
self.cooker = bb.cooker.BBCooker(self.configuration, self.featureset)
File "/yocto/poky/bitbake/lib/bb/cooker.py", line 197, in __init__
self.initConfigurationData()
File "/yocto/poky/bitbake/lib/bb/cooker.py", line 356, in initConfigurationData
self.databuilder.parseBaseConfiguration()
File "/yocto/poky/bitbake/lib/bb/cookerdata.py", line 317, in parseBaseConfiguration
raise bb.BBHandledException
bb.BBHandledException
ERROR: The following required tools (as specified by HOSTTOOLS) appear to be unavailable in PATH, please install them in order to proceed:
rpcgen
So add nativesdk-rpcsvc-proto to provide the
program rpcgen to fix the gap.
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Include cmake as part of build tree toolchain so that it is populated
into meta-ide-support's recipe-sysroot-native which is prepended to
$PATH, this ensures cmake-native is picked up first before host cmake.
Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* since following change:
allarch: only enable allarch when multilib is not used
the sstate-diff-machines.sh reports different signature for target-sdk-provides-dummy
when multilib is enabled
=== Comparing signatures for task do_populate_sysroot.sigdata between qemux86 and qemux86copy ===
ERROR: lib32-target-sdk-provides-dummy different signature for task do_populate_sysroot.sigdata between qemux86 and qemux86copy
basehash changed from b0a44b2c7003b6b4aa3a023d9cb9fe82 to 3a59fa25ddb6a95aff079d477ebf3457
Variable SSTATE_MANMACH value changed from 'qemux86' to 'qemux86copy'
ERROR: target-sdk-provides-dummy different signature for task do_populate_sysroot.sigdata between qemux86 and qemux86copy
basehash changed from 9e44f1deb3d15886ee96db1a3332764c to 6b417d08a5113c9b06d13b3681f5ab4f
Variable SSTATE_MANMACH value changed from 'qemux86' to 'qemux86copy'
It's using:
inherit allarch
python() {
# Put the package somewhere separate to ensure it's never used except
# when we want it
# (note that we have to do this in anonymous python here to avoid
# allarch.bbclass disabling itself)
d.setVar('PACKAGE_ARCH', '${DUMMYARCH}')
}
and DUMMYARCH = "sdk-provides-dummy-target"
The difference as shown with bitbake -e before and after reverting allarch.bbclass commit:
before revert:
$SSTATE_MANMACH [2 operations]
set? oe-core/meta/classes/sstate.bbclass:61
"${SSTATE_PKGARCH}"
set sstate.bbclass:100 [__anon_111_oe_core_meta_classes_sstate_bbclass]
"machineName"
pre-expansion value:
"machineName"
SSTATE_MANMACH="machineName"
$SSTATE_PKGARCH
set oe-core/meta/classes/sstate.bbclass:11
"${PACKAGE_ARCH}"
SSTATE_PKGARCH="sdk-provides-dummy-target"
$PACKAGE_ARCH [3 operations]
set oe-core/meta/conf/bitbake.conf:150
[_defaultval] "${TUNE_PKGARCH}"
set oe-core/meta/conf/documentation.conf:304
[doc] "The architecture of the resulting package or packages."
set dummy-sdk-package.inc:12 [__anon_12_oe_core_meta_recipes_core_meta_dummy_sdk_package_inc]
"${DUMMYARCH}"
pre-expansion value:
"${DUMMYARCH}"
PACKAGE_ARCH="sdk-provides-dummy-target"
after revert:
$SSTATE_MANMACH
set? oe-core/meta/classes/sstate.bbclass:61
"${SSTATE_PKGARCH}"
SSTATE_MANMACH="allarch"
$SSTATE_PKGARCH [2 operations]
set oe-core/meta/classes/sstate.bbclass:11
"${PACKAGE_ARCH}"
set sstate.bbclass:98 [__anon_111__oe_core_meta_classes_sstate_bbclass]
"allarch"
pre-expansion value:
"allarch"
SSTATE_PKGARCH="allarch"
$PACKAGE_ARCH [4 operations]
set oe-core/meta/conf/bitbake.conf:150
[_defaultval] "${TUNE_PKGARCH}"
set oe-core/meta/conf/documentation.conf:304
[doc] "The architecture of the resulting package or packages."
set oe-core/meta/classes/allarch.bbclass:5
"all"
set dummy-sdk-package.inc:12 [__anon_12_oe_core_meta_recipes_core_meta_dummy_sdk_package_inc]
"${DUMMYARCH}"
pre-expansion value:
"${DUMMYARCH}"
PACKAGE_ARCH="sdk-provides-dummy-target"
the relevant part of the anonymous python in sstate.bbclass:
elif bb.data.inherits_class('allarch', d) and d.getVar("PACKAGE_ARCH") == "all":
d.setVar('SSTATE_PKGARCH', "allarch")
else:
d.setVar('SSTATE_MANMACH', d.expand("${PACKAGE_ARCH}"))
So with allarch.bbclass change, the PACKAGE_ARCH isn't set to "all" because multilib is enabled,
but that causes sstate.bbclass to set SSTATE_MANMACH to MACHINE instead of SSTATE_PKGARCH
allarch, where it got MACHINE is still a bit of mystery to me.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
They are required by oeqa.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We need this to avoid symbol mismatch issues for binaries that use this
on newer systems which then won't run on older ones where it isn't present.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recent glibc change removed libnss-nis module from glibc and a new
recipe libnss-nis.bb was added.
After this change, we need to make sure nativesdk-libnss-nis is also
included in buildtools-tarball, otherwise, we may encounter the following
error when using 'tar' command from buildtools-tarball.
tar: relocation error: /lib/x86_64-linux-gnu/libnss_nis.so.2: \
symbol _nsl_default_nss version GLIBC_PRIVATE not defined \
in file libnsl.so.1 with link time reference
This error occured on my ubuntu16.04 host with 'nis' configured in
/etc/nssswitch.conf.
So add nativesdk-libnss-nis to buildtools-tarball to fix this problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's useful for the post-relocate scripts to be able to see the SDK
environment, for example to see the values of CC, CXX etc. in order to
dynamically generate toolchain files.
To enable this, source the SDK environment script prior to calling the
relocate scripts.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
packages like fontforge-native fail with mysterious errors like
| ../../git/inc/gwwiconv.h:44:21: error: conflicting types for ‘gww_iconv_close’
| #define iconv_close gww_iconv_close
| ^~~~~~~~~~~~~~~
| ../../git/inc/gwwiconv.h:37:13: note: previous declaration of ‘gww_iconv_close’ was here
| extern void gww_iconv_close( gww_iconv_t cd);
| ^~~~~~~~~~~~~~~
The reason behind this is that a check for iconv fails during native
configure run, the check fails because the autoconf test to check for iconv
pokes for these gconv's in test runs before declaring iconv support successful.
Therefore when uninative is active the package fails to build but when
uninative is inactive all works fine. this patch fixes that
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
flag
Without this change, there will be two sstate index files in
tmp/sstate-control for any machine that contains a dash in the
name.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fedora28[1] has decided to go ahead and use libxcrypt to replace libcrypt from glibc
despite the change not having merged into glibc upstream yet. This breaks the use of
uninative in OE on fedora28 since binaries there are now using new symbols only found
in libxcrypt. libxcrypt is meant to be backwards compatible with libcrypt but not the
reverse.
Since this will impact OE in the next release cycle, this changes nativesdk only
to use this new model and adds libxcrypt to work in that case. This allows us to
build a uninative which is compatible with fedora28 and previous other OSes.
In order to work, recipes will now need to depend on virtual/crypt where they use
libcrypt since its now a separate library and we can't depend on it from glibc to
preseve backwards compatibility since glibc needs to build first. For now, only the
problematic nativesdk recipes have been fixed up. For target use, the default
provider remains glibc for now. Assuming this change is merged into upstream glibc,
we will need to roll this change out for the target but we will do this in the next
release cycle when we can better deal with the resulting bugs.
[1] https://fedoraproject.org/wiki/Changes/Replace_glibc_libcrypt_with_libxcrypt
Original patch from Charles-Antoine Couret <charles-antoine.couret@essensium.com>,
tweaked by RP to add virtual provides, SkipRecipe for libxcrypt and other minor
tweaks.
Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@essensium.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is basically a copy/paste of buildtools-tarball so copy some of the
recent changes to buildtools across.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As glibc 2.27 can't read older locale-archives, SDKs using glibc 2.27 on hosts
using glibc earlier than 2.27 won't be able to find any locales, so bitbake
won't start and Python can't use UTF-8.
So by default install all locales into the SDK. Special-case Extensible SDKs by
installing no locales as they ship glibc in a buildtools, and that will have the
locales.
Locale installation requires cross-localedef, so add that to DEPENDS.
Also remove the explicit en_US addition in buildtools-tarball as it is now
redundant.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recipe depends on many machine specific tasks and should be marked
as machine specific itself. This fixes signature tests after some dependency
issues were fixed at the bitbake level which exposed that issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recipes can now install post-relocation scripts which will be run when
the SDK is installed.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using host gpg has been problematic, and particularly this removes
the need to serialize package creation, as long as --auto-expand-secmem
is passed to gpg-agent, and gnupg >= 2.2.4 is in use
(https://dev.gnupg.org/T3530).
Sadly, gpg-agent itself is single-threaded, so in the longer run
we might want to seek alternatives:
https://lwn.net/Articles/742542/
(a smaller issue is that rpm itself runs the gpg fronted in a serial
fashion, which slows down the build in cases of recipes with very
large amount of packages, e.g. glibc-locale)
Note that sstate signing and verification continues to use host
gpg, as depending on native gpg would create circular dependencies.
[YOCTO #12022]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we migrated rpm v5 -> v4, we lost the ability to drop "per file"
dependencies from the rpm backend for things like "/bin/bash" and
"/usr/bin/env" which meant the sdks were becomming 'bloated'.
This restores the functionality using a dummy package, similarly to
the way the buildtools perl issue was addressed. It also removes
the non-functional old code so as not to confuse people in future.
I ran into this problem trying to filter dependencies to only rpms
a build directly depends upon and it turns out we have some determinism issues
in this area so this is something key to fix.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently systemd-boot actually incorporates libgcc, since the
systemd-boot needs to be built with 64bit instructions it can not
use the x32 based libgcc.
Use the new override to ensure it gets overriden, linux-gnux32 could
not be used because x86-64 has higher priority.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds the meta-go-toolchain. It enables the generation of a Go
toolchain allowing for cross compiling for target architecture.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
DISTRO_VERSION may contain the current date, and so is prone to mismatches
particularly when keys are created on one date, and dnf is configured to use the keys
on another date.
[YOCTO #11983]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added sfdisk, e2fsck, mkswap, resize2fs, mkdosfs to the
list of used tools in Disk class. They're going to be used
in 'wic write' implementation.
Added dependency to util-linux to wic-tools to ensure that
sfdisk and mkswap are available from wic-tools native sysroot.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In particular, do_unpack needs to be deleted as it was causing missing
subpackages. Do_unpack cleans the builddir and if it was run after
do_get_public_keys it cleaned up all keys causing no packages to be
built.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added e2fsprogs-native to the list of dependencies for wic-tools
as all fs-related utilities have to be in this list.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Chen Qi
Chin Huat Ang
Ross Burton
Pierre Le Magourou
Kai Kang
Vincent Prince
Mingli Yu
Martin Jansa
Robert Yang
Martin Kelly
Khem Raj
Peter Kjellerstedt
Joshua Watt
Alexander Kanavin
Saul Wold
Otavio Salvador
Ed Bartosh
Markus Lehtonen