aboutsummaryrefslogtreecommitdiffstats
path: root/meta/recipes-core/glib-2.0
AgeCommit message (Collapse)Author
2012-09-18recipes: bump PR to rebuild after libffi5 -> libffi6Martin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-08-31nativesdk: Switch to using nativesdk as a prefix, not a suffixRichard Purdie
As discussed on the mailing lists, using a suffix to package names is hard and has lead to many recipes having to do PKGSUFFIX games. Its looking extremely hard to scale nativesdk much further without hacking many recipes. By comparison, using a prefix like multilib does works much better and doesn't involve "hacking" as many recipes. This change converts nativesdk to use a prefix using the existing multilib infrastructure. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-30glib-2.0: don't disable all debugging functionalityRoss Burton
GLib will use "minimal" debugging on non-development builds and the extra safety net and ability to debug at all is totally worth the small performance cost. If someone has a need for every ounce of performance, a simple .bbappend can restore this option. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-08-06glib-2.0-nativesdk: Add dependency on glib-2.0-nativeKhem Raj
when we build for nativesdk it needs tools from installed glib-2.0-dev package. We zeroes out compile_resourses but then genmarshal came up so instead of going about disabling them one by one lets depend on glib-2.0-native since thats the right thing to do. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-31glib-2.0-nativesdk: Fix build on ubuntu 11.10Khem Raj
When you have a distro which has older version of glib-2.0 installed then it does not have compile_resources installed which essentially glib-2.0 nativesdk is looking for on build host. So like in a cross build we disable the configure check which will force it to build an internal copy and use it. This problem may not be seen on newer distros like ubuntu 12.04 since they have newer version of glib-2.0 installed Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-20glib-2.0: cleanup thanks to new gtk-doc.bbclassRoss Burton
Signed-off-by: Ross Burton <ross.burton@intel.com>
2012-07-18bitbake.conf: Define USRBINPATH globally instead of individuallyRichard Purdie
Many recipes are now having to define PERLPATH and PYTHONPATH variables. Creating USRBINPATH in bitbake.conf means we can remove all these lines from the many recipes now needing this and simplify the code changes needed in each case, reducing the chance of errors being introduced. Also fixup glib python binary location issue and fix function indentation. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17glib: package bash-completion files in separate package and move ↵Martin Jansa
${PN}-codegen to .inc * 2.32.4 has completion files in ${datadir}/bash-completion and dbus also packages bash-competion files in separate package Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-17glib: upgrade to 2.32.4Martin Jansa
* it's bugfix release, see http://ftp.gnome.org/pub/gnome/sources/glib/2.32/glib-2.32.4.news for list of fixed bugs Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-29glib-2.0: Add missing dependency on virtual/libiconvKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-05-25glib-2.0: Clean up OECONF flags into one variableRichard Purdie
Without this change, libelf was "floating" for linuxstdbase for example, leading to build failures. This patch moves all the common options into a common variable. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-05-24glib-2.0: upgrade to 2.32.3Martin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2012-05-07glib-2.0: Fix issues with libelf dependency creeping inRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-05-06glib-2.0: upgrade to 2.32.2Martin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-05-06glib-2.0: upgrade to 2.32.1Martin Jansa
* g_once_init_enter.patch shouldn't be needed after upstream commit 794c1a30bc27b4c8d77537813acb1213d5ac80f2 * LIC_FILES_CHKSUM change is only because PCRE was upgraded and now pcre.h says "Copyright (c) 1997-2012 University of Cambridge" instead of 2010 and COPYING file "Please see the file LICENCE in the PCRE distribution for licensing details." but LICENSE file is not part of glib distribution (but still BSD in standalone PCRE) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2012-05-01glib-2.0: Dont disable iconv for uclibcKhem Raj
Currently we stub out iconv in glib when building for uclibc which is not needed and infact results in building systems with false hope of having iconv and they misbehave during runtime Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-04-16glib-2.0: fix builds on fedora 17Robert Yang
Generally distros keep perl at /usr/bin/perl Fedora 17 also has /bin/perl this causes glib-2.0 build on such distros to put perl interpreter path in the perl scripts as /bin/perl But we set perl location for target as /usr/bin/perl This mismatch of perl path causes failure of rootfs image creation like this: | error: Failed dependencies: | /bin/perl is needed by libglib-2.0-utils-2.30.3-r0.ppc603e NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed [YOCTO #2304] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
2012-03-21glib-2.0: upgrade to 2.30.3Shane Wang
Signed-off-by: Shane Wang <shane.wang@intel.com>
2012-03-13glib-2.0: Add Upstream Status for nodbus.patchSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-02-27glib-2.0: Disable fam, we don't depend on itRichard Purdie
Various people are reporting glib-2.0 failures from a dependency on libfam creeping in uninvited. This patch explicitly disables it to favour a deterministic build. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-02-26glib: Drop dbus dependency, it isn't usefulRichard Purdie
dbus is only needed for some of the glib tests which we don't use. We can therefore drop the dependency and gain some small parallelism gains. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-02-24glib-2.0: Fix unpackaged files warningRichard Purdie
WARNING: For recipe glib-2.0, the following files/directories were installed but not shipped in any package: WARNING: /usr/lib/gio WARNING: /usr/lib/gio/modules Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-02-21recipes: bump PR to rebuild .la files without libz.laMartin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-02-10zlib: Upgrade 1.2.5 -> 1.2.6Khem Raj
Dont use autotools, it really not so autoconf like. the configure script gets updated with every release of zlib and we overwrite that. Instead use the upstream provided configure copyright year was changed in zlib.h which caused change in LIC_FILE_CHECKSUM fix.inverted.LFS.logic.patch is already applied upstream so drop it Drop the configure.ac and Makefile.am scripts since we do not autoreconf anymore and do not inherit autotools anymore Bump PR for depending recipes so a rebuild it ensues so that they dont depend on .la anymore and add missing dependencies discovered during incremental build Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-01-05glib-2.0: ensure dtrace is diabled for all distro options and fix packagingSaul Wold
The linuxstdbase configuration flags also need to disable dtrace as per the sandard package configuration options. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-01-03glib-2.0: disable dtrace due to host contaminationSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-01-03misc patches: fix patch headersNitin A Kamble
These patches were marked by "UpstreamStatus:" line, fix it to use "Upstream-Status:" instead. Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2012-01-03glib-2.0: we need zlibChristopher Larson
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
2012-01-02glib-2.0: upgrade to 2.30.2Shane Wang
Signed-off-by: Shane Wang <shane.wang@intel.com>
2011-12-15Patch Upstream Status UpdatesSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2011-12-05glib-2.0: fix compilatoin with x32 toolchainNitin A Kamble
Pass along CC & CFLAGS vars so that the tune parameters set get used. This fixes compilation with x32 toolchain. Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-12-01glib-2.0: upgrade to version 2.30.1Dongxiao Xu
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-11-18glib-2.0: fix qsort_t testing for uclibcHenning Heinold
* instead of disabling the configure test and set it always true use the site files to set it true for glibc/eglibc and false for uclibc * remove the patch ' tested only for uclibc * bump PR Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-11-10Convert to use direct access to the data store (instead of bb.data.*Var*())Richard Purdie
This is the result of running the following over the metadata: sed \ -e 's:bb.data.\(setVar([^,()]*,[^,()]*\), *\([^ )]*\) *):\2.\1):g' \ -e 's:bb.data.\(setVarFlag([^,()]*,[^,()]*,[^,()]*\), *\([^) ]*\) *):\2.\1):g' \ -e 's:bb.data.\(getVar([^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \ -e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \ -e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^() ]*\) *):\2.\1):g' \ -e 's:bb.data.\(getVar([^,()]*\), *\([^) ]*\) *):\2.\1):g' \ -i `grep -ril bb.data *` Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-11-02meta: glib-2.0: don't apply qsort_r test removable patch for native versionSimon Busch
On some buildhosts with an older version of native glib-2.0 installed (in this case 2.16.6) the qsort_r test removable patch leads to a compilation error: | ./.libs/libglib-2.0.so: undefined reference to `qsort_r' | collect2: ld returned 1 exit status This patch fixes this so the patch gets only applied for the native version of this recipe. Signed-off-by: Simon Busch <morphis@gravedo.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-10-17glib-2.0: Add nativesdk depends for libffiSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2011-10-14glib-2.0: Extend to provide nativesdk recipeKhem Raj
qemu-nativesdk 0.15 needs it Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-10-14glib: upgrade to 2.30.0Martin Jansa
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-09-22glib-2.0: Drop old 2.27.5 development versionRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-09-22glib-2.0: include glib-gettextize stuffDmitry Eremin-Solenikov
glib-utils already includes glib-gettextize program. Include some files necessary for glib-gettextize to work. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-09-22glib-2.0: Fix python paths in scripts to use target pathsRichard Purdie
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-08-18glib-2.0: explicitly disable dtrace and systemtap for native varaintJoshua Lock
This prevents systemtap and dtrace being picked up from the host as reported on the Yocto mailing list by Andre Haupt <andre@bitwigglers.org> Signed-off-by: Joshua Lock <josh@linux.intel.com>
2011-07-22glib-2.0: fix a compilation issue due to dtraceNitin A Kamble
With multilib & x32 builds dtrace is getting turned-on by the glib-2.0 configure, which causes following compilation failure. | x86_64-linux-libtool: link: ccache gcc -isystem/disk0/pokybuild/build-multilib/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe -Wall -Wl,-rpath-link -Wl,/disk0/pokybuild/build-multilib/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath -Wl,/disk0/pokybuild/build-multilib/tmp/sysroots/x86_64-linux/usr/lib -Wl,-O1 -o .libs/gtester gtester.o -L/disk0/pokybuild/build-multilib/tmp/sysroots/x86_64-linux/usr/lib ./.libs/libglib-2.0.so -lrt -Wl,-rpath -Wl,/disk0/pokybuild/build-multilib/tmp/sysroots/x86_64-linux/usr/lib | ./.libs/libglib-2.0.so: undefined reference to `GLIB_SLICE_ALLOC' | ./.libs/libglib-2.0.so: undefined reference to `GLIB_MEM_REALLOC' | ./.libs/libglib-2.0.so: undefined reference to `GLIB_SLICE_FREE' | ./.libs/libglib-2.0.so: undefined reference to `GLIB_MEM_ALLOC' | ./.libs/libglib-2.0.so: undefined reference to `GLIB_MEM_FREE' | ./.libs/libglib-2.0.so: undefined reference to `GLIB_QUARK_NEW' | collect2: ld returned 1 exit status | make[4]: *** [gtester] Error 1 Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2011-07-13Patches: Fix Upstream-Status infoSaul Wold
Signed-off-by: Saul Wold <sgw@linux.intel.com>
2011-06-29glib-2.0,intltool,rpm,sgmlspl-native: Bump PR to resolve perl-native issueDexuan Cui
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
2011-06-28base/glib-2.0: Simplify USE_NLS handling for glib-2.0Richard Purdie
Currently the only way to get anything to build is to set USE_NLS="yes" for glib-2.0. We might as well do this in the recipe by default for now and simpllify the code. The magic handling of USE_NLS_<recipename> is also removed since this can be done in the form USE_NLS_pn-<recipename> using overrides these days. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-06-22glib-2.0 2.28.x: update to 2.28.8Koen Kooi
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-05-27License Field Cleanup: Non-standard field namesBeth Flanagan
I've cleaned up some odd license fields, fixed some license names and corrected some incorrect licenses. LICENSE really needs a pass through by the maintainers as some of the licensing is incorrect. Also, every license with Artistic should be gone through and noted as which version of Artistic. Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
2011-05-17recipes: Add upstream status information for patchesDongxiao Xu
gypsy: Add upstream status information for gypsy's patch alsa-utils: fix upstream status typo pulseaudio: add upstream status for pulseaudio-0.9.15's patches hostap: add upstream status for hostap's patch glibc: add upstream status for glibc's patch glib-2.0: add upstream status for glib-2.0's patch mtd-utils: add upstream status for mtd-utils patches add upstream status for opkg's patches mark add_vercmp.patch as inappropriate since the added function is not used. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
2011-05-16glib-2.0: use PN instead of glib-2.0 in PACKAGES and FILESMartin Jansa
* otherwise notes like this are shown: NOTE: multiple providers are available for runtime glib-2.0-utils (glib-2.0-nativesdk, glib-2.0) NOTE: consider defining a PREFERRED_PROVIDER entry to match glib-2.0-utils Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-24 23:22:34 +0000