| Age | Commit message (Collapse) | Author |
|---|
|
When vpnc support is included through PACKAGECONFIG, there
is now an extra vpn-script coming after the atest upgrade,
include that script into FILES so it gets packaged.
Signed-off-by: Alejandro Hernandez Samaniego <alejandro@enedino.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Most of these were unused, remaining in the inc files long after the
PR values were removed from the recipes.
The only two which did anything wre in xorg-font and for those,
bump PR by hand and remove the INC_PR to clean up all references.
This kind of change is much better handled by PRServ now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Drop a patch merged upstream.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The client depends on readline which is GPLv3. Add a PACKAGECONFIG so users who
don't need the client and are against GPLv3 can disable it.
Also remove the explicit installation of the client in do_install_append, as the
Makefile installs it now.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
nf_tables_inet.ko and nf_tables_ipv4.ko and nf_tables_ipv6.o
(and nf_tables_arp.ko and nf_tables_netdev.ko) were merged into
the core nf_tables.ko before v4.17 in kernel commit
02c7b25e5f54 netfilter: nf_tables: build-in filter chain type
nf_meta.ko was merged to be a builtin of nf_tables.ko before
v4.18 in kernel commit
8a22543c8e70 netfilter: nf_tables: make meta expression builtin
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The connman-wait-online package currently isn't marked as
systemd-enabled package. This means it is impossible to
auto-enable the service during image creation or package
installation, as no preset files and no pkg_postinst()
snippet is being created.
This change should have been done as part of the
upgrade to v1.31
Note:
connman-wait-online is needed when connman is in use
in more complex network/interface setups for systemd's
network-online.target to report success.
systemd-networkd's systemd-networkd-wait-online.service
alone doesn't work in such scenarios and simply times
out, as it know nothing about the expected network/
interface configuration, meaning the target doesn't
boot successfully (systemctl list-units --failed),
and long delays are seen, caused by waiting for the
systemd-networkd-wait-online.service timeout.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
bluez4 was removed from meta-oe 2 years ago.
Simplfy the setup of the two level bluetooth and bluez4/bluez5
distro features by removing the bluez4/bluez5 distro features.
This also removes the no longer required bluetooth class.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
enabled
* import 2 fixes from LuneOS
* with l2tp PACKAGECONFIG enabled connman depends on MACHINE_ARCH xl2tpd:
=== Comparing signatures for task do_package_write_ipk.sigdata between hammerhead and mako ===
ERROR: connman different signature for task do_package_write_ipk.sigdata between hammerhead and mako
NOTE: Starting bitbake server...
Hash for dependent task xl2tpd/xl2tpd_git.bb.do_packagedata changed from 6312d5711b5c2c1a85ee235d09bf37a8ec00f7ad9e7248c087bb83ef1d5bd078 to c0d3ef52b37bda945d8b2a015980ddb8fe7b4b3dca3d82d71a84176cc5125142
Unable to find matching sigdata for /OE/build/luneos-master/webos-ports/meta-openembedded/meta-networking/recipes-protocols/xl2tpd/xl2tpd_git.bb.do_packagedata with hashes 6312d5711b5c2c1a85ee235d09bf37a8ec00f7ad9e7248c087bb83ef1d5bd078 or c0d3ef52b37bda945d8b2a015980ddb8fe7b4b3dca3d82d71a84176cc5125142
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix handling of escape characters in regexs and hence fix python
Deprecation warnings which will be problematic in python 3.8.
Note that some show up as:
"""
meta/classes/package.bbclass:1293: DeprecationWarning: invalid escape sequence \.
"""
where the problem isn't on 1293 in package.bbclass but in some _prepend to a
package.bbclass function in a different file like mesa.inc, often from
do_package_split() calls.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- updated connman to v1.36
- removed mainstreamed patches
- includes.patch has been rabased and transformed into git format
Signed-off-by: Oleksandr Kravchuk <dev@sashko.rv.ua>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recipes can't rely on IMAGE_FEATURES to determine whether the
resulting packages will be used in an image with read/write or
read-only rootfs because IMAGE_FEATURES is a per-image recipe
variable.
The connman.inc code checked IMAGE_FEATURES to determine whether
/var/run/connman needs to be created via tmpfiles.d when booting a
read-only rootfs. In my tests that is not necessary (anymore?),
something (connman itself?) creates the missing directory.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When building with nftables support, connman doesn't ever
depend on the nftables command line tool.
connman will depend on libmnl and libnftnl at build and
run time. In addition, the nftables rules it creates
depend on various kernel modules being present.
Update the PACKAGECONFIG to reflect this. We use the
just introduced RRECOMMENDS field so as to make the
build still succeed if those kernel modules have been
linked statically into the kernel, i.e. when the
packages haven't actually been created.
Signed-off-by: André Draszik <adraszik@tycoint.com>
Acked-by: Sylvain Lemieux <slemieux@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Due to recent modifications related to systemd, sysvinit builds began
to show this warning:
WARNING: connman-1.34-r0 do_package: connman: NOT adding alternative
provide /etc/resolv.conf: /etc/resolv-conf.connman does not exist
Fix this warning by making those updates specific to systemd.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
connman fails to start in systemd based read-only images while creating links:
Jun 08 12:53:56 qemux86-64 systemd[1]: Starting Create Volatile Files
and Directories...
Jun 08 12:53:56 qemux86-64 systemd-tmpfiles[366]:
[[0;1;31msymlink(/var/run/connman/resolv.conf, /etc/resolv.conf) failed:
Read-only file system[[0m
Fix this failure and make connman co-exist with systemd-resolved.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1.33 -> 1.34
1. Refreshed 0001-Fix-compile-on-musl-with-kernel-4.9-headers.patch
2. Removed upstreamed patch:
0003-stats-Fix-bad-file-descriptor-initialisation.patch
3. Provided PACKAGECONFIGs for nftables and iptables support
4. Add new patch to fix build with nftables:
0001-firewall-nftables-fix-build-with-libnftnl-1.0.7.patch
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The upstreamable include fixes have been sent upstream. The patch set adds
AC_USE_SYSTEM_EXTENSIONS so we don't need to explictly define _GNU_SOURCE
anymore.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
They are not compatible with python 3, and require python-dbus
and python-gobject (which are provided only for Python 3).
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
connman-conf is now a systemd oneshot and therefore doesn't need to
be sed'ed in to the ConnMan service file.
Note: this doesn't affect sysvinit where we provide a ConnMan
init script which checks for the presence of the wired-networking
script and, if it exists, executes it as part of the connman init.
[YOCTO #8399]
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
1.30 -> 1.31
Included newly introduced connman-wait-online service.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All of the connman-tools, connman-tests and connman-client
runtime depends connman.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In some recipes overly-split -dbg packages were merged into PN-dbg. Unless
there's a very good reason, recipes should have a single -dev and -dbg package.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When the client is enabled, which we do by default, readline is required.
Currently it gets pulled in by other dependencies of connman, indirectly,
but we should be explicit rather than relying on this.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
wired-setup script should not be in ${libdir} as it's not arch
dependent.
This also fixes (or works around) a practical issue where a multilib
build installs the wrong version of connman-conf and then connman
can't find the script.
[YOCTO #8550]
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Move connmans xuser-related D-Bus policy to a separate file that
xuser-account installs: This way connman does not need to depend on
xuser-account. Add policies for bluez and ofono in the same file.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are already "allow" rules for root and conditionally xuser to
send messages to connman: there should be no reason for a default
allow policy.
Also, conditionally add a policy to allow xuser to send to the
connman vpn service (similar to main service).
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This means dragging in xuser-account even when it's not used but
that's a lesser evil than the recipe depending on machine specific
settings.
This also prevents a warning on connman service startup when
ROOTLESS_X is not set:
Unknown username "xuser" in message bus
[YOCTO #8005]
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
- cleanup multiple inherit lines;
- RDEPENDS cleanup, use PACKAGECONFIG[] instead.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ConnMan commit ac332c5d01b0737c18cb58c8ccc67cf6b0427e1d changes
how the connman.service file is created from .in file. After
that commit, the file is created by Makefile instead of configure.
This means that we need to tweak the service file in compile
time instead of configure time because the generated file will not
be there after the configuration.
This commit can be used even with older ConnMan version as the
connman.service file is there when the compilation happens.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Copied from xserver-nodm-init.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
connman currently supports both bluez4 and bluez5 without distinguishing
them at configuration time.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
And bump the PR to avoid:
configure: error: source directory already configured; run "make distclean" there first
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- License file copyright years updated;
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch goes through the OE-Core recipes and marks those which use autotools
but don't support a separate build directory (${S} != ${B}). A new class,
autotools-brokensep is used for this purpose.
This doesn't introduce any change in behaviour in its own right.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is mainly a bug fix release.
- gtk-doc infrastructure has been removed
starting with connman 1.21; as such, support
for it has been removed from the recipe;
- Updated bug tracker site;
- Cosmetic cleanup;
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fix issue with fallback nameservers not being used!
Fix various other issues.
Add support for NTP v3 protocol.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
--enable-threads and --enable-fake are obsolete, unrecognized options
for connman now.
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch fixes systemd's postinst/postrm script generation.
Signed-off-by: Yevhen Kyriukha <kirgene@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
[YOCTO #4345]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Automatically finding out the paths to VPN client programs does
not work when configure script is run so set the paths manually.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The connman init script sources a setup file from /usr/lib/connman,
so we end up with no network in qemu multilib enabled images.
The init script it's installed by connman and because wired-setup
it's installed by another package (connman-conf) we can't use
libexecdir here and now (in the init script and systemd service file).
Once libexecdir changes from ${libdir}/${bpn} to something else like
/usr/libexec we could use that instead of ${libdir}/connman.
Changed in v2: - better commit message
[YOCTO #4493]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
Alejandro Hernandez
Richard Purdie
Alexander Kanavin
Ross Burton
André Draszik
Adrian Bunk
Martin Jansa
Olekandr Kravchuk
Patrick Ohly
André Draszik
Maxin B. John
Peter Kjellerstedt
Joshua Lock
Alexander Kanavin
Joshua Lock
Hongxu Jia
Christopher Larson
Jussi Kukkonen
Khem Raj
Cristian Iorga
Jukka Rissanen
Andreas Oberritter
Peter A. Bigot
Robert Yang
Otavio Salvador
Muhammad Shakeel
Yevhen Kyriukha
Laurentiu Palcu
Stefan Stanacar