| Age | Commit message (Collapse) | Author |
|---|
|
The patch tool will apply patches by default with "fuzz", which is where if the
hunk context isn't present but what is there is close enough, it will force the
patch in.
Whilst this is useful when there's just whitespace changes, when applied to
source it is possible for a patch applied with fuzz to produce broken code which
still compiles (see #10450). This is obviously bad.
We'd like to eventually have do_patch() rejecting any fuzz on these grounds. For
that to be realistic the existing patches with fuzz need to be rebased and
reviewed.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The dtc is used when generating images which use Device Tree and we
must use the OE version to avoid relying on the host one.
Reported-by: Renato Caldas <rm.santos.caldas@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This upgrades the U-Boot from 2017.11 to 2018.01 release
and drops patches accepted upstream.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
See the patch for details. This patch has already been applied
upstream, but we need it for v2017.11.
Upstream-Status: Accepted [http://git.denx.de/?p=u-boot.git;a=commit;h=ded84f90a1066eef5f34daa4539273de64f7b811]
Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This upgrades the U-Boot from 2017.09 to 2017.11 release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This reverts commit 60c90398580998b2379bb438f0f75b29285135a5.
This causes circular dependencies when UBOOT_SIGN_ENABLE is active.
These are usually caused by circular dependencies and any circular dependency chains found will be printed below. Increase the debug level to see a list of unbuildable tasks.
Identifying dependency loops (this may take a short while)...
ERROR:
Dependency loop #1 found:
Task u-boot.bb:do_concat_dtb (dependent Tasks ['kernel.bb:do_assemble_fitimage'])
Task u-boot.bb:do_install (dependent Tasks ['u-boot.bb:do_concat_dtb', 'pseudo_1.8.2.bb:do_populate_sysroot', 'u-boot.bb:do_compile'])
Task u-boot.bb:do_deploy (dependent Tasks ['u-boot.bb:do_deploy_dtb', 'u-boot.bb:do_install'])
Task .../recipes-kernel/linux/kernel.bb:do_assemble_fitimage (dependent Tasks ['kernel.bb:do_compile', 'u-boot.bb:do_deploy'])
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
- The environment tools target has change to envtools;
- The HOSTCC variable must be used to set CC for cross;
- Drop ARCH variable as it is set on config;
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This upgrades the U-Boot to the 2017.09 release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In order for u-boot to work on Nios II architecture,
the device tree file requires adding pre-relocation
flag to the CPU node.
Patch is tested on 10m50 board. Pass booting up
Linux.
[YOCTO #11628]
Signed-off-by: Gan, Yau Wai <yau.wai.gan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch upgrades the U-Boot to the 2017.07 release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Getting ip address from DHCP server is much more convenient
than setting static ip. It allows to configure u-boot in
more generic way and to avoid hardcoding static ip in
u-boot configuration.
Enabled dhcp client functionality for Yocto reference
hardware MPC8315E-RDB.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upgrade U-Boot to the latest version.
Since the latest version has the default gcc patch in it, drop it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Denys Dmytriyenko <denis@denix.org>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If building for nativesdk the wrong rss sysroot is used leading the
following error message.
| ERROR: oe_runmake failed
| In file included from tools/imximage.c:13:0:
| include/image.h:1024:27: fatal error: openssl/evp.h: No such file or directory
| # include <openssl/evp.h>
Tools needed on the build host (script/basic/fixdep) and code compiled
for the SDK machine are both built with the build host's compiler,
leading to additinal errors.
Adding CROSS_COMPILE="${HOST_PREFIX}" and using the cross-compiler for
the SDK_ARCH fixes the build error.
The resulting binary in the SDK is working.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
After discussions with upstream this version of the patch was proposed
and is being submitted to upstream u-boot. Update to that version
(which is better than my workaround).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There was a race condition in the uboot-extlinux bbclass where
only a half written extlinux.conf would be put in the deploy
directory. Fix this by adding the deploy task after the do_install
rather than after the do_compile.
Signed-off-by: Jack Mitchell <jack@embed.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
OE needs to be able to change the default compiler. If we pass in HOSTCC
through the make command, it overwrites not only this setting but also the
setting in tools/Makefile wrapped in ifneq ($(CROSS_BUILD_TOOLS),) which
breaks the build.
We therefore add a way of changing the default in the top level Makefile
without interfering with the other setting.
I've emailed this workaround to Masahiro Yamada for discussion.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Only ever change the CMD_LICENSE in the u-boot config if it is enabled
to prevent corruption of the config file. In case the CMD_LICENSE was
already disabled, the sed substitution inserted another "# " in front
of the CMD_LICENSE which triggered a restart of Kconfig oldconfig and
failed the build.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade U-Boot to the latest version.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Upgrade U-Boot to the latest version.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Denys Dmytriyenko <denis@denix.org>
Cc: Ross Burton <ross.burton@intel.com>
|
|
The build failed in multiple configurations. First, the native and
nativesdk was using the host compiler and was pulling host libraries
into the build. Second, the target configuration was attempting to
execute tools/bin2header tool on host, which is compiled for target,
to generate license header file that is not used by tools.
This patch changes the EXTRA_OEMAKE to address these issues, to build
both native and target builds with the correct compilers and correct
sysroots. Moreover, this patch removes the CONFIG_CMD_LICENSE from
tools build, thus disabling the execution of target tools/bin2header.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ross Burton <ross.burton@intel.com>
|
|
Upgrade U-Boot to the latest version.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Denys Dmytriyenko <denis@denix.org>
|
|
The u-boot recipes share a couple of common variables, which makes
updating of the recipes error prone and a toil. Factor those common
bits into u-boot-common_${PV}.inc so that they are in one place.
The u-boot_${PV}.bb now explicitly require u-boot-common_${PV}.inc
before require u-boot.inc , as doing require u-boot-common_${PV}.inc
from u-boot.inc would fail due to ${PV} not being set. This is a
functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use uboot-extlinux-config class to create extlinux.conf file and then
install inside /boot/extlinux directory and also put file to deploy
dir. This file will be only create if UBOOT_EXTLINUX is set to 1.
You can use DEPLOYDIR/extlinux.conf file to install into final image
using wic setting:
IMAGE_BOOT_FILES_append = " extlinux.conf;extlinux/extlinux.conf"
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The U-Boot binary is not an executable, it is a binary file,
set it's permissions to 0644 instead of 0755.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Need to reference config.mk file in source tree which is no longer
the current directory when using out of tree builds.
Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch enabled out-of-tree builds for u-boot. This also helps building
u-boot using EXTERNALSRC flow
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When using UBOOT_CONFIG format, the final u-boot binary for each config
may have different names. Extend UBOOT_CONFIG format to support different
binary to be copied.
The new format is supposed to be compatible with old one as ${UBOOT_BINARY}
is copied by default, and images,binary can be empty.
An example format to specify it, in the machine, is:
UBOOT_CONFIG ??= "sdcard-ifc sdcard-qspi lpuart qspi secure-boot nor"
UBOOT_CONFIG[nor] = "ls1021atwr_nor_config,,u-boot-dtb.bin"
UBOOT_CONFIG[sdcard-ifc] = "ls1021atwr_sdcard_ifc_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[sdcard-qspi] = "ls1021atwr_sdcard_qspi_config,,u-boot-with-spl-pbl.bin"
UBOOT_CONFIG[lpuart] = "ls1021atwr_nor_lpuart_config,,u-boot-dtb.bin"
UBOOT_CONFIG[qspi] = "ls1021atwr_qspi_config,,u-boot-dtb.bin"
UBOOT_CONFIG[secure-boot] = "ls1021atwr_nor_SECURE_BOOT_config"
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use "-n" operation instead of comparing with an "x"-ed empty string,
use $(...) notation instead of the deprecated backticks.
Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This introduces a new uboot-sign.class to support U-Boot verified boot.
This part delivers the new class file, with related environment variables, and
a new task intended to run before do_install task and which performs the
concatenation of the u-boot-nodtb.bin and the device tree blob. The 'cat'
command used overrides the u-boot.bin in both DEPLOYDIR & build dir to
propagate the changes in later tasks (do_install, do_package, etc.)
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for the SPL_BINARY variable to handle sub directories. In
some cases the SPL binary that needs to be deployed is only built to the
spl/ directory in U-Boot. So that a sub directory can be specified in
the SPL_BINARY variable, handle the case so that the deploy code uses
the basename of the path specified in SPL_BINARY.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 2016.03 release has been announced in March 14th. This
incorporates a lot of bug fixes and improvements which are useful for
any new embedded development.
Along with the upgrade of U-Boot and its related recipes, this patch
also drops the AM335x environment fix which has been merged into the
release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Beaglebone Black boot started failing after upstream patch 755324c432f, and was
fixed in 7205442e6. Unfortunately, the u-boot upgrade from 2015.10 to 2016.01
only includes the former patch. The latter patch is backported to fix this.
Signed-off-by: Erkka Kääriä <erkka.kaaria@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrade U-Boot to latest version and drop upstreamed patches.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In some recipes overly-split -dbg packages were merged into PN-dbg. Unless
there's a very good reason, recipes should have a single -dev and -dbg package.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The U-Boot 2015.10 has been released at October 20th 2015. This also
removes the GCC workaround, for the inline behavior, as this version
properlu supports the GCC 5.2 as compiler.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
U-Boot will compile its own tools during the build, with specific
configurations (aka when CONFIG_FIT_SIGNATURE is enabled) the host tools
require openssl. This patch adds 'openssl' as a PACKAGECONFIG that
enables the use of openssl-native as a dependency and also adds the
HOSTCC flags that U-Boot uses when compiling the host tools.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for U-Boot recipes to install and deploy the generated ELF
files for each config. The U-Boot ELF's are useful for debugging, and
booting (directly booting, e.g. by JTAG or using QEMU) and complement
the generated binary image.
This additional feature is disabled by default, machines/etc that want
to use it need to set UBOOT_ELF to the corresponding ELF file (generally
u-boot or u-boot.elf depending on the architecture)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
An additional use case of UBOOT_CONFIG is when a machine has applicability
to boards of the same architecture but different in other ways
to require a different UBOOT_BINARY build.
The UBOOT_CONFIG default value can be a list of these board types.
For example:
UBOOT_CONFIG ??= "boardA boardB"
UBOOT_CONFIG[boardA] = "boardA_defconfig"
UBOOT_CONFIG[boardB] = "boardB_defconfig"
Change do_install and do_deploy sections which process a UBOOT_CONFIG list
to create short symbolic links to each of the config types for UBOOT_BINARY.
This is similar to the links currently being created for
SPL_BINARY when it is defined with a UBOOT_CONFIG list.
For the above example, and UBOOT_BINARY as u-boot.bin,
the additional symbolic links created in the DEPLOYDIR would be
u-boot.bin-boardA
u-boot.bin-boardB
Signed-off-by: Lee Nipper <lee.nipper@linux.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The gcc 5 change its default standard from gnu89 to gnu11. These two
standards do have different semantics for inline functions. And the
gcc 5 will emit the following errors on the "extern inline" functions:
arch/powerpc/cpu/mpc8xxx/fsl_lbc.o: In function `ld_le16':
./arch/powerpc/include/asm/byteorder.h:12: multiple definition of `ld_le16'
arch/powerpc/cpu/mpc8xxx/fdt.o:./arch/powerpc/include/asm/byteorder.h:12: first defined here
Fix these build errors by using "-fgnu89-inline" to enforce the gnu89
inline semantics as suggested in [1].
[1] https://gcc.gnu.org/gcc-5/porting_to.html
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This upgrades the U-Boot and its related recipes for the 2015.07
release.
The following recipes has been upgraded:
- u-boot
- u-boot-mkimage
- u-boot-fw-utils
The patches which were applied on top of the 2015.01 release are
dropped as those are not needed in this release.
The license checksum update was due minimal changes in the text, those
have no impact in the license terms.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Change-Id: I5322f1ff8653009b45ddee1a2d3a0d96584d3327
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The script does "i == j" checks to retrieve the config <-> type pairs from
the UBOOT_MACHINE and UBOOT_CONFIG lists. This check however requires both
j and i to be initially unset. Ensure this by explicitely unsetting i.
This fixes broken u-boot SPL installations with SolidRun machines
(the SPL wasn't being installed and deployed.)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a patch based on one from Zhenhua Luo <zhenhua.luo@freescale.com>
in the meta-fsl-ppc layer to avoid build failures for u-boot with the
mpc8315e-rdb machine with binutils 2.25.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Resolve mismatch between U-Boot configs and uboot image name.
The ${S}/${config}/u-boot-${type}.${UBOOT_SUFFIX} may alway be false
and repeat compile or install so we need to check if ${type} match ${config}
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Ross Burton
Otavio Salvador
Marek Vasut
Richard Purdie
Kristian Amlie
André Draszik
Gan, Yau Wai
Ed Bartosh
Max Krummenacher
Philip Balister
Denys Dmytriyenko
Jack Mitchell
Peter Kjellerstedt
Joshua Lock
Fabio Berton
Andrew Goodbody
Manjukumar Matha
Ting Liu
Andrew Shadura
Yannick Gicquel
Nathan Rossi
Erkka Kääriä
Lee Nipper
Kevin Hao
Khem Raj
Carlos Rafael Giani
Chunrong Guo