| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we add from a fetched URL we are supposed to turn the resulting
source tree into a git repository (if it isn't already one). However, we
were using the older deprecated option name here instead of the
positional argument, so "devtool add -f <url>" resulted in the repo
being created but "devtool add <url>" didn't, which was wrong.
Also update the oe-selftest tests to check that this worked.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds intel-corei7-64 with x86-common, this makes the x86-common
whitelist available for intel-corei7-64 bsp also.
[YOCTO #9179]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This message appears on older hardware and is a benign warning
[YOCTO #9179]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We're dropping RPM 4 as it's not well maintained, therefore remove
a selftest which tests RPM 4 availability.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a test to build core-image-sato with read-only-rootfs enabled.
[ YOCTO #9214 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add DL_DIR and TIME to the hash tests. We can't add DATE for some reason.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
'test_layer_git_revisions_are_displayed_and_do_not_fail_without_git_repo'
was renamed to 'test_layer_without_git_dir' which is shorter.
fix for [YOCTO #9243]
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This new file is encapsulating functionality for both
running tests with binaries support via TestNeedsBin() decorator
and exporting these binaries via testimage.bbclass file.
Addresses [YOCTO #7850], [YOCTO #8478], [YOCTO #8481],
[YOCTO #8536], [YOCTO #8694].
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is not the correct way to handle this - it significantly increases
the time taken to run oe-selftest anywhere MACHINE is set to some other
value (for example "qemux86-64"), because all of the artifacts for
qemux86 need to then be built as well when running the test. If we need
to skip these tests on non-QEMU machines, the devtool test already
demonstrates how to do that.
This reverts commit 169e1eaa4fc5ed03e2307b68686a7f5b1db37a36.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The extra directory next to the recipe should only be created if there
are files to put into it; currently only the npm plugin does this. I
didn't notice the issue earlier because the test was actually able to
succeed under these circumstances if the recipe file came first in the
directory listing, which was a fault in my original oe-selftest test;
apparently on some YP autobuilder machines the order came out reversed.
With this change we can put the oe-selftest test that highlighted the
issue back to the way it was, with an extra check to reinforce that only
a single file should be created.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Correctly handle the any other files/directories that may exist
during the test.
======================================================================
FAIL: test_recipetool_create_simple (oeqa.selftest.recipetool.RecipetoolTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/utils/decorators.py", line 106, in wrapped_f
return func(*args, **kwargs)
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/recipetool.py", line 414, in test_recipetool_create_simple
self.fail('recipetool did not create recipe file; output:\n%s\ndirlist:\n%s' % (result.output, str(dirlist)))
AssertionError: recipetool did not create recipe file; output:
NOTE: Fetching http://www.dest-unreach.org/socat/download/socat-1.7.3.0.tar.bz2...
NOTE: Unpacking /srv/www/vhosts/autobuilder.yoctoproject.org/current_sources/socat-1.7.3.0.tar.bz2 to /tmp/recipetool-Uj7MIh/
NOTE: Recipe /tmp/recipetoolqaebTo9s/recipe/socat_1.7.3.0.bb has been created; further editing may be required to make it fully functional
dirlist:
['socat', 'socat_1.7.3.0.bb']
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the recipe files are hardcoded and if the recipe
change the version, the test will fail.
This will change from using a harcoded file to look for the
file using bitbake-layers. Now, just the recipe name must
be specified.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently when using a git version the check for the stamp, using regex,
will fail because of plus sign in the version.
With this change the version is escaped before adding it to the regex.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Test that layer git revisions are displayed and
do not fail without git repository.
fix for [YOCTO #8852]
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixing one of the recipes not to contain unsafe references to paths
results in this QA test failing. Improve the test so that we test
the recipe works, then if we intentionally break the recipe, the
issue is detected.
Also split out the binaries test from the scripts test. The binaries
issue may also get 'fixed' in future and need the same fix.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Testing of local sdk updates was commented out.
Local sdk updates are functional now, so the tests should be re-enabled.
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The SDKUpdateTest class test devtool sdk-update mechanism inside
eSDK.
The SDKUpdateTest class search for new sdk if not found uses
the main one then it publish the eSDK into known folder
inside work and it starts a web server for serve the eSDK.
Finally it executes sdk-update over http, the local test is
commented due to bug [1].
[1] https://bugzilla.yoctoproject.org/show_bug.cgi?id=9043
[YOCTO #9089]
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
tcname is needed for eSDK update testcase will be used for
publish it and then try to update
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The removal of bitbake and scripts PATH is only needed by eSDK tests
so move to eSDK context only.
This also it's a support for eSDK update test because it needs to
execute oe-publish-sdk from scripts.
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Due to the neeed to use in other modules.
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a test for devtool upgrade with a recipe pointing to a git
repository, since this uses several different code paths.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Use a more real-world test of a recipe pointing to a remote file
* The cleanup tracking / teardown commands need to be added towards the
top, or they won't have the desired effect of cleaning up if the test
fails.
* Check that a versioned subdirectory gets renamed to match the new
version
* Ensure the recipe contents gets changed as we expect it to
* Check that the recipe directory is deleted by devtool reset at the end
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Moved an error to common, and whitelisted the BAR errors
and ati module. Also the uvesafb related errors will be
ignored in LSB images which do not have graphic interface.
Fix for [YOCTO #8387]
Fix for [YOCTO #8590]
Fix for [YOCTO #6820]
Fix for [YOCTO #7897]
Signed-off-by: Lucian Musat <george.l.musat at intel.com>
Signed-off-by: Cristina Agurida <cristina-danielax.agurida@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
correctly on localhost.
This test case validates if prservice start and stop properly the server.
Using bitbake commands also validates the exit status.
[YOCTO #8258]
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A network module was added, and will contain network utility funcions for now.
with get_free_port that returns available network port in the system.
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
fix for [YOCTO #8706]
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When checking enabling buildhistory doesn't change anything but rootfs stamps,
just build core-image-minimal instead of -sato to reduce the time this test
takes.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bitbake option to restore from sstate only within a build
(i.e. execute no real tasks, only setscene)
fix for [YOCTO #8876]
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
boot time string can change its format of the output of the amount of time
it took to boot. It is required to handle graceful fail of the parsing
errors that it provokes
[YOCTO #8889]
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the addition of the task name to recipe output, the sanity tests
need updates where they are looking for specific messages.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Image should be build usual way, i.e. using bitbake <image>.
Specifying do_mage_complete and do_rootfs_wicenv tasks should not
be needed anymore as those tasks should be run by bitbake for
every image.
Removed specifying do_mage_complete and do_rootfs_wicenv tasks
from bitbake calls.
(From OE-Core rev: d8d7bd1b41eb846f18378a2581ff172cb2cc52b8)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed the following pylint warnings:
C: 45, 0: Line too long (91/80) (line-too-long)
C:105, 0: Wrong continued indentation.
ignore_status=True).status)
^ | (bad-continuation)
W: 83, 8: Redefining built-in 'vars' (redefined-builtin)
W:175, 8: Redefining built-in 'vars' (redefined-builtin)
W: 27, 0: Unused import sys (unused-import)
(From OE-Core rev: ecb5320e766d0fa031c269d6d9b2a24c81c7aa7e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added test_qemu testcase to boot wic-image-minimal and test
that 2 partitions mentioned in .wks are mounted.
[YOCTO #8499]
(From OE-Core rev: 6fb015d0847fe7d259d654d4a99bf4c328f810ab)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replaced wic.bz2 -> wic in the recipe.
Replaced wic.bz2 -> wic in oe-selftest test case.
wic-image-minimal is going to be booted in qemu and tested.
As runqemu doesn't support compressed images this recipe needs
to produce raw wic image.
(From OE-Core rev: 3ce91db94f4b921566dce0dc6f91a422009be06b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added 'wic' to the list image types supported by targetcontrol.
This is a preparation for booting and testing wic images
with oe-selftest.
[YOCTO #8498]
(From OE-Core rev: 7dda053fbd1ea1354b7720cfa691470ba88ef5b9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added new parameter 'ssh' to targetcontrol 'start' method
to be able to test images without running ssh server.
[YOCTO #8498]
(From OE-Core rev: 1c3c66aadd43092bc19242b0651ee810cc31fe7c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
QemuRunner requires pair of ip addresses provided through kernel
commandline for method 'start' to work. These ip addresses are
used to connect to the image using ssh and run tests there.
However, this functionality should not be mandatory as testing
doesn't always require ssh connection. Some tests can be run using
serial console.
Added new parameter 'get_ip' to QemuRunner.start to make it possible
to skip getting pair of ip addresses from kernel command line. This
should allow oe-selftest to test images without modifying kernel
command line.
[YOCTO #8498]
(From OE-Core rev: 3f8b734ebb81d035849288091bb0b97b9c4fba34)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed unused parameter 'test' from runqemu function.
(From OE-Core rev: c688b3bcbb57099fa72a9728bc708b109802f7fc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a test so we validate the following recently implemented/fixed
aspects of "devtool add":
* Adding from a local directory with no name specified
* Auto-detecting the name and version from autoconf files
* Setting SRC_URI and S from the local git repo
* Showing the recipe file path in "devtool status" if it has been
created within the workspace
Incidentally also tests:
* LICENSE and LIC_FILES_CHKSUM detection (though just for this piece of
software)
* Extracting a dependency from autoconf (though just for this narrow
case since there's only one)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's going to be more common for users not to have the prepared source
tree for a recipe already, so the default behaviour ought to be to
extract it for them from the recipe. Change the default to extract
(effectively making the -x option a no-op) and add a --no-extract/-n
option to disable it. Later we can look at trying to be smart and
reusing an existing source tree instead of erroring out if it exists;
for now this is just the default reversal.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are recipes that manage to have sstate signatures that depend on
PARALLEL_MAKE, so verify that changing this variable doesn't change signatures.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Recent bitbake changes mean the whitespace formatting around the way functions are
defined, changed which broke the rather ugly construct this test uses to append to
a python function. This really needs to be rewritten and improved but fix the
whitespace so at least the tests work again and other regressions don't creep in.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the test fails, print the incorrect values so aid debugging.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
one.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add simple myapp application is a C app that prints hello world
and exit.
Add devtool test for that this app to the workspace, build and
reset it.
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When run SDK tests over eSDK we need to use SDKExtTestContext
instead of SDKTestContext because if we use SDKTestContext search
for SDK manifest and depends on the SDK manifest generation so
populate_sdk needs to be executed.
Adds a compatibility mode flag to SDKExtTestContext for search tests
over sdk module instead of sdkext module and change testsdk calls
to comply with this new param.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Robert Yang
Paul Eggleton
Saul Wold
Joshua Lock
Ross Burton
Daniel Istrate
Costin Constantin
Richard Purdie
Mariano Lopez
Juro Bystricky
Aníbal Limón
Cristina Agurida
Francisco Pedraza
Benjamin Esquivel
Ed Bartosh
Ed Bartosh
Aníbal Limón