| Age | Commit message (Collapse) | Author |
|---|
|
Fix this error where 'coredumpctl info' warns that the coredump is still being
processed:
```
AssertionError: 1 != 0 : MiniDebugInfo Test failed: No match found.
-- Notice: 1 systemd-coredump@.service unit is running, output may be incomplete.
```
Signed-off-by: Etienne Cordonnier <ecordonnier@snap.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
set the package-database of a "lower image" to unpack and build upon
when installing packages for the current image. This way a lean image
will be created, which only holds the packages that are not already
present in the lower image.
An image build such could then be used with overlayfs or systemd-
sysext to extend the "lower image" on demand; for development purposes
on a device running the "lower image" in RO mode for example.
A configuration could look as follows:
some-core-image.bb
inherit image
IMAGE_GEN_PKGDBFS = "1"
extending-image.bb
inherit image
IMAGE_BASE_PKGDB = "some-core-image"
Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
archive the package database after the rootfs has been put together as
*rootfs-pkdbfs.tar.gz, and put it into the deploy folder.
This creates a snapshot of the package mangers state at the point in
time when all dependencies have been resolved and installed; which
could be used by "extension images" to built upon.
Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This allows fine-tuning local configurations with pre-frabricated
configuration snippets in a structured, controlled way. It's also
an important building block for bitbake-setup.
There are three operations (list/add/remove), and here's the list output:
alex@Zen2:/srv/storage/alex/yocto/build-64$ bitbake-config-build list-fragments
NOTE: Starting bitbake server...
Available fragments in selftest layer located in /srv/work/alex/poky/meta-selftest:
selftest/test-another-fragment This is a second configuration fragment intended for testing in oe-selftest context
selftest/test-fragment This is a configuration fragment intended for testing in oe-selftest context
The tool requires that each fragment contains a one-line summary
at the top, followed by multiple lines of description, as hash-prefixed
comments.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
bitbake-layers create-layer-setup
This plugin copies all currently configured layer respositories into
a dedicated location on local disk. This is useful for entirely offline
layer replication, when the layers are packed and then unpacked from
an archive, rather than fetched from git (there can be situations
where fetching from git is undesirable or impossible).
This plugin will also be used when replicating an entire yocto build
(with build config and sstate cache), and is an element of that.
This plugin is similar to what esdk does, and it provides that functionality
outside of populate_sdk_ext task. It does not reuse esdk code,
as that simply copies the layer tree; it's better to use 'git clone'
with a path to original repo on local disk, as that will preserve
commit history in the copy.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
test_systemd_coredump_minidebuginfo was getting skipped in CI, because the feature isn't enabled per default in any image at the moment.
Add this selftest so that test_systemd_coredump_minidebuginfo gets executed in CI.
Signed-off-by: Etienne Cordonnier <ecordonnier@snap.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Enrico Jörns <ejo@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Usage and arguments are not necessarily self-explaining, thus add a bit
of documentation here.
Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test was failing with core-image-full-cmdline which uses sleep from coreutils instead of sleep from busybox.
Signed-off-by: Etienne Cordonnier <ecordonnier@snap.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The io, cap_bounds and filecaps groups were removed in latest version
of ltp. Tweak the test class to match.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The builtin command "sleep" was getting executed instead of the busybox binary.
Hence "pidof sleep" was empty and the test was failing.
Signed-off-by: Etienne Cordonnier <ecordonnier@snap.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
License-update: formatting, FSF address
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There were two issues here:
- the path to native python was not included, so the test
suite was running with host python, causing failures due to
host python being given native libraries:
https://autobuilder.yoctoproject.org/typhoon/#/builders/148/builds/1711/steps/12/logs/stdio
(rust recipe uses native python throughout)
- tmp/hosttools was listead ahead of native-sysroot/usr/bin
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Setting it explicitly replaces rust's default choice which is rustdoc
(needed for example in selftests and otherwise expected to be present
in typical rust installations):
https://github.com/rust-lang/rust/blob/master/config.example.toml#L320
This addresses some of the rust selftest failures but not all. Help
is appreciate to restore the selftest.
Unfortunately, this also breaks rust reproducibility (or rather exposes
that it was never properly fixed, as explained here:
https://lists.openembedded.org/g/openembedded-core/message/199288
)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Eclipse plugin is very dead, we don't need to carry the manual test
guide for it.
CROPS has its own automated testing, nobody is doing the testing by hand.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
go.bbclass uses a special do_unpack function that causes the git root
to be different from S. Verify that it unpacks as expected.
[ YOCTO #15483 ]
Signed-off-by: Ola x Nilsson <olani@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is useful not just in cdn/local cache tests, but also in the build bundle test,
and so should be applied by default.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows reusing the check function in tests other than CDN/local mirror
ones, such as sstate bundle testing.
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Remove redundant imports.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of having a test called eg "assimp", rename it to "cmake" as the
point of the test is to verify that CMake works. This should make it
clearer what the tests are actually exercising.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To enable this test to work with gcc 14, pass the option to make
warnings non-fatal. Also upgrade to version 5.4.1 from 5.3.1.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
librdfa hasn't had a commit for a decade now and as such has problems
with modern compilers (specifically gcc 14.1). Switch the recipe
creation test to something much simpler that we also control: dbus-wait.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Several recipes have S pointing at a directory that does not exist.
Set S in these cases to somethig valid making the metadata and
recipe behaviour more consistent.
Tweak one of the QA test diff offsets to match the changed recipe.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The only real reason for oe-local-files was to support S = WORKDIR. With changes to
drop support for that, it makes sense to simplify devtool and to try and make both
the code and the processes/workflows simpler.
This patch drops support for S = WORKDIR, removes oe-local-files and then updates
the test cases to match this new situation.
At the code level, we assume we can always now track code changes using git and
that things committed into git are handled as patches (as before) but delta against
HEAD is saved as specific file level changes to the recipe.
One test is disabled as it is no longer approproate. It is being keped until we can
make WORKDIR != UNPACKDIR at which point it should be revisited.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace references of WORKDIR with UNPACKDIR where it makes sense to do
so in preparation for changing the default value of UNPACKDIR.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Similarly to centos 8, centos 9 doesn't support the render device we need
for this test.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes the debuginfod selftest fails due to a timeout, because it
spends too long scanning a huge deploy directory that due to what tests
were ran previously can contain 30K packages.
The test only needs a subset of the feed, so use the new localpkgfeed
class to construct a minimal feed before running the test.
[ YOCTO #14937 ]
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If usrmerge is in DISTRO_FEATURES, assumptions in one of the tests would
fail. Improve the test so it works in both cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If usrmerge is in DISTRO_FEATURES, assumptions in one of the tests would
fail. Improve the test so it works in both cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit ab6d3e3d645ffc343f434bf731339fa237df027a
from poky repository.
The previous reverted commit was a workaround. The fix
"oeqa/selftest/devtool: fix _test_devtool_add_git_url"
tackle the issue. So, the workaround is not needed anymore.
Signed-off-by: Alexandre Truong <alexandre.truong@smile.fr>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch is a follow-up to the bug#15466.
As a reminder, the bug was about devtool’s submodule detection
checking for HEAD when a version is being passed.
As Vincent Kriek pointed out:
the --version that is being passed to devtool is only used for
setting the PV value in the recipe. To take into account the tag,
we add --srcrev to the command:
devtool add --srcrev v3.1.0 --version v3.1.0 mbedtls git://git@github.com/ARMmbed/mbedtls.git;protocol=https
Changes to _test_devtool_add_git_url have been made to take
into account the srcrev. srcrev will be passed as an optional
parameter because the test_devtool_add_git_style1
does not need the srcrev contrary to test_devtool_add_git_style2
Fixes [YOCTO #15466]
Signed-off-by: Alexandre Truong <alexandre.truong@smile.fr>
Reported-by: Alexandre Truong <alexandre.truong@smile.fr>
Suggested-by: Vincent Kriek <vincent@coelebs.dev>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't have a test to check if we can correctly devtool update-recipe/finish
into another layer. So update the existing test_devtool_update_recipe_local_files
to also check the updates into another layer.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
not found
If testtools and/or subunit modules are not found we get the following backtrace
(example for testtools):
NOTE: Starting bitbake server...
Traceback (most recent call last):
File "<..>/poky/scripts/oe-selftest", line 60, in
<module>
ret = main()
File "<..>/poky/scripts/oe-selftest", line 47, in main
results = args.func(logger, args)
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 391, in run
rc = self._internal_run(logger, args)
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 377, in _internal_run
rc = self.tc.runTests(**self.tc_kwargs['run'])
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 161, in runTests
return super(OESelftestTestContext, self).runTests(processes, skips)
File "<..>/poky/meta/lib/oeqa/core/context.py", line
91, in runTests
result = self.runner.run(self.prepareSuite(self.suites, processes))
File "<..>/poky/meta/lib/oeqa/selftest/context.py",
line 154, in prepareSuite
from oeqa.core.utils.concurrencytest import ConcurrentTestSuite
File
"<..>/poky/meta/lib/oeqa/core/utils/concurrencytest.py",
line 22, in <module>
import testtools
ModuleNotFoundError: No module named 'testtools'
Fix this by adding a custom callback on -j/--num-processes parameter to
check testtools and subunit modules. Fallback to serial testing if
missing. This strategy is already used in sdk/context.py
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
-l option is specific to df provided by coreutils, if df
applet from busybox is used then it does not work and fails
like below
Fixes
df: invalid option -- 'l'
BusyBox v1.36.1 () multi-call binary.
Usage: df [-PkmhT] [-t TYPE] [FILESYSTEM]...
DEBUG: [Command returned '1' after 0.71 seconds]
DEBUG: Command: df -hl
Status: 1 Output: df: invalid option -- 'l'
it seems worth a compromise to show remote mounted filesystems if any
during ptests and it works with both df implementations
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The problem is the following:
AssertionError: 'gitsm://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master' != 'git://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master'
Mbedlts made changes to their repository, adding a sub-module, thus the
assert triggers an error with the url:
git://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master
https://github.com/Mbed-TLS/mbedtls/commit/456a54da8ef44c8b725b524567c08cffec6a7214
was the upstream change.
To fix the issue, the url has been changed to:
gitsm://git@github.com/ARMmbed/mbedtls.git;protocol=https;branch=master
Signed-off-by: Alexandre Truong <alexandre.truong@smile.fr>
Reviewed-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the read-only squashfs filesystem to test the read-only case.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Under some load conditions, the result event can come back before the
command complete event. If that happens, the code would hang
indefinitely.
Rework the code to wait for both events and avoid the hang.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current CDN isn't able to serve all objects on first request, and it
was suggested to work around that by trying again:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=15335#c16
Once CDN moves to a better location this can probably be reverted.
[YOCTO #15335]
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch adds to run_test_sstate_creation so that it also tests
that sstate directories don't accidentally pickup umask permissions
from the user upon creation.
[RP: Python style tweaking]
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The dbus-wait command returns a timeout after 60s but reports "success", detect this.
Unfortunately it does effectively break the test as the signal is nearly never being
correctly detected since it was already sent.
For that reason comment out the code instead too.
Also fix the loop conditional as the logic was incorrect and it was looping
indefinitely when an image match didn't occur.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch uses dbus-wait to wait for matchbox to be up. Once that
happens, it sets a timeout of 60 seconds and takes a screenshot
and compares it, every 2 seconds. If diff=0 it passes. If the timeout
ends, it fails.
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
|
|
Excluding riscv64 due to mouse rather than a touchscreen which adds a
moving cursor, so the diff ends up > 0. Need to fix the image to use the
touchscreen rather than mouse input.
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
|
|
The mouse panel icon can move when the time changes between 3 and 4 digits.
Ideally we'd fix the alignment of the clock on the panel but to get the
tests working, increase the size of the mask for now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Allow tools to be found from the host PATH so that imagemagick from a buildtools
tarball/sdk can work
* Reformat the code to have imports at the start of the file and have more standard
formatting and whitespace
* Always save copies of the images, the space imapct is negligle compared to the
debug win
* Write the images to ${T}
* Use bb.utils.mkdirhier() instead of more complex code
* Restrict the tests to images containing matchbox-desktop
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This takes the work rburton did on image screenshot testing and
expands it.
Right now this works with most of the qemu based machines except for
- qemuppc64
- qemuarmv5
- qemuriscv32
- qemuloongarch64
See "Known Issues" further down.
This test takes a screendump of a qemu image, blanks out the clock
and compares it to an image we have on record. If the diff is exact,
the test passes. If not, it stores the image in build/failed-images and
fails out.
In order to enable this test, you will need meta-openembedded/meta-oe in
your bblayers.conf for imagemagick and the following in local.conf:
IMAGE_CLASSES += "testimage"
TEST_SUITES = "login"
TESTIMAGEDEPENDS:append:qemuall = " imagemagick-native:do_populate_sysroot "
Known Issues
------------
The main issue is that I've yet to find a gating factor that would allow
me to tell when the qemu instance is fully up and rendered. I've tried a
few tactics here, (dbus-wait, qmp) but for now a disgusting
time.sleep(30) is there.
You can replicate this by running qemumips. The screen load takes forever,
but you even see it on qemux86 where the Home and Workspace Switch icons
will sometimes take a while to fully load.
Eventually I'm going to have to take multiple screenshots and compare
them, but then you get into the issue where the question is, is the diff
greater than 0 because it hasn't fully loaded or something is actually
incorrect.
There are the issues I know about:
- runqemu qemuppc64 comes up blank.
- qemuarmv5 comes up with multiple heads but sending "head" to screendump.
seems to create a png with a bad header.
- qemuriscv32 and qemuloongarch64 don't work with testimage apparently?
- qemumips64 is missing mouse icon.
- qemumips takes forever to render and is missing mouse icon.
- qemuarm and qemuppc return incorrect width
- All images have home and screen flipper icons not always rendered fully at first.
The sleep seems to help this out some, depending on machine load.
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Co-authored-by: Ross Burton <ross.burton@arm.com>
Co-authored-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A change in QEMUMonitorProtocol.cmd() requires that we either pass in
kwargs instead of an argument dict or move to cmd_raw()
cmd() was renamed to cmd_raw() (and command() was renamed to cmd())
See:
https://github.com/qemu/qemu/commit/37274707f6f3868fae7e0055d9a703006fc142d0
https://github.com/qemu/qemu/commit/684750ab4f8a3ad69512b71532408be3ac2547d4
My concern with this patch is that I haven't seen this come up with
utils/dump.py which also uses QemuMonitor's run_monitor. If it is
occuring, this should fix issues there as well
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adjust selftest to git-add the directory with newly added patches,
as the new minicom recipe has no default patches, and thus no directory
with them (and the selftest assumed it does).
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since go-1.21 GOPROXY needs to be set explicitly, otherwise it fails with:
- GOPROXY list is not the empty string, but contains no entries
This fixes the selftest
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The recently introduced postactions module can raise, on failing ptests,
the following warning:
WARNING: core-image-ptest-glib-2.0-1.0-r0 do_testimage: Can not get host
disk usage: [Errno 2] No such file or directory: '/usr/bin/df'
The issue is likely not happening because of df absence (to be confirmed
amongst the variety of workers) but because of the wrong path. Fix it by
letting subprocess search for df, passing only the binary name. To make it
work, we also have to reset the environment, otherwise the environment
configured before running bitbake will be used, and search will fail.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Improve the GDB related tests. Verify GDB finds the correct source
files.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Etienne Cordonnier
Johannes Schneider
Alexander Kanavin
Enrico Jörns
Richard Purdie
Ross Burton
Ola x Nilsson
Alexandre Truong
Julien Stephan
Khem Raj
Baruch Siach
Alexander Kanavin
Eilís 'pidge' Ní Fhlannagáin
Jose Quaresma
Alexis Lothoré
Adrian Freihofer