| Age | Commit message (Collapse) | Author |
|---|
|
Due to the neeed to use in other modules.
Signed-off-by: Aníbal Limón <limon.anibal@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A network module was added, and will contain network utility funcions for now.
with get_free_port that returns available network port in the system.
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added new parameter 'ssh' to targetcontrol 'start' method
to be able to test images without running ssh server.
[YOCTO #8498]
(From OE-Core rev: 1c3c66aadd43092bc19242b0651ee810cc31fe7c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
QemuRunner requires pair of ip addresses provided through kernel
commandline for method 'start' to work. These ip addresses are
used to connect to the image using ssh and run tests there.
However, this functionality should not be mandatory as testing
doesn't always require ssh connection. Some tests can be run using
serial console.
Added new parameter 'get_ip' to QemuRunner.start to make it possible
to skip getting pair of ip addresses from kernel command line. This
should allow oe-selftest to test images without modifying kernel
command line.
[YOCTO #8498]
(From OE-Core rev: 3f8b734ebb81d035849288091bb0b97b9c4fba34)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed unused parameter 'test' from runqemu function.
(From OE-Core rev: c688b3bcbb57099fa72a9728bc708b109802f7fc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bitbake logger stops working after tinfoil.shutdown removes console
handler from it. This makes bb.{error,warn,note,critical} messages
disappear from the console. Adding console handler to bitbake logger
again should fix this issue.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of sourcing /etc/profile to get $PATH including /usr/sbin, just assign
to PATH in the ssh invocation.
The remote /etc/profile may not actually be manipulating PATH as we expect, and
there may be other commands which can interfere with the tests (such as resize
emitting a series of control characters on connection).
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Not everyone wants to run the tests with a qemu that has a graphical output, so
allow display to be None and pass nographic to runqemu in that case.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Sometmes when there is high load in the server the
commands executed in the target take a lot of time
to complete and this lead to incorrect dump files or
empty files. This is caused because run_serial has a
timeout of five seconds when running the commands in
the target.
This change removes the timeout and just keep reading
the socket until it finds the prompt from the target
or when the socket is not ready to be read.
[YOCTO #8510]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Having the timestamps in the log is useful when debugging those cases when
the booting time takes longer than expected. printk.times=1 enables stamping
into every printk Kernel call.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We need to handle keyword arguments here or sending a keyword argument
to a decorated function that accepts keyword arguments will trigger an
error. (This showed up when testcase decorators were added to the
recipetool.RecipetoolTests.test_recipetool_appendsrcfiles_basic_subdir
test).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change will show runqemu output in the logs
when running the runtime tests. This is helpful
for debugging testimage errors.
[YOCTO #8550]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
ftools functions that expect data may get 'None'; this patch does this check
and return immediately if this is the case.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
There may be cases where the configuration file (path) does not exist,
thus the remove_from_file should catch this exception. In case the exception
is not the latter (errno.ENOENT), then re-raise it.
[YOCTO #8540]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The current state of qemurunner will drop the Unicode
characters received from qemu, this is because error
report web had problems with Unicode characters; now
that the server support Unicode, it is possible to
log all the output from qemu. So far the only Unicode
character seen is the copyright symbol.
This patch allows to get Unicode characters from the qemu
target and save the log in an UTF-8 file for latter use.
[YOCTO #8225]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change just add two more commands to
the host dumps to get more information
related to the IO.
[YOCTO #8412]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When getting the failures/errors/skipped lists, include the
unit test without the full path.
This issue was found on this scenario
| test_1_logrotate_setup (oeqa.runtime.logrotate.LogrotateTest) ... FAIL
| test_2_logrotate (oeqa.runtime.logrotate.LogrotateTest) ... ok
Where test_1_logrotate failed and test_2_logrotate should not have
run because
@skipUnlessPassed("test_1_logrotate_setup")
def test_2_logrotate(self):
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the output from qemu could contain control
or Unicode characters; having such characters in the
log will cause an internal server error when sending
the report to error reporting web. Control characters
can be found in the command line used to run quemu too.
This change sanitize the output from qemu and the
command line used to run qemu, this way the logs doesn't
contain control or Unicode characters and this will solve
the issue of error reporting web and generate better
logs.
The only Unicode character found in the qemu output
is the copyright symbol, it really doesn't interfer
removing Unicode characters with debugging.
[YOCTO #8225]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When not doing actual tests with testimage, like for example
exporting tests, the link to the log file was still created
although the actual log file was not existent. Fixed it by
moving the link creation part into the run() method.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To avoid logs being overwriten when running the automated
tests multiple times, log files include timestamps in
their names and a link is created to point to the latest one.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If qemu didn't start correctly, we may not have registered the child
signal. This results in a nasty traceback which confuses the underlying
issue. Cleanup this code and make the handler cleanup conditional.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently if qemu fails when running a selftest and
tries to run some commands on the host it will fail
because some variables required by the Dumper class
do not exist because testimage was not included.
This change adds a default parent directory to save
the dumps for the host or target. Also adds default
commands to run if no commands were provided to the
class. With these changes the previous errors using
selftest don't show anymore.
[YOCTO #8306]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The Starting logging thread message is also executed on run() inside
LoggingThread class.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
LoggingThread is used for receive console output from QEMU
over TCP, so add filter to only wake poll on read events,
also change the event mask variable name to be more descriptive.
This fixes HIGH CPU consume caused by wake on ready to write
events.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Once the DUT is hanged during testing, currently all the following test
cases have to wait for default timeout to exit. Using this decorator the
user can choose a timeout at case by case basis and what happens when the
timeout is reached by overwriting the self.target.restart method.
[YOCTO #7853]
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On aarch64 we need to do this as the versions in the upstream source don't
recognise the target triplet causing SDK test failures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if qemu segfaults, the tests merrily continue trying to execute
which takes time for them to timeout and is a bit silly. Worse, no logs about
the segfault are shown to the user, its silent!
This patch tries to unravel the tangled web of issues and ensures that we:
* install a SIGCHLD handler which tells the user qemu exited
* check if qemu is running, if it isn't fail the test outright
* don't leave processes behind in sshcontrol which would hold
bitbake.lock and block shutdown
(From OE-Core rev: 77e9363feba53b72429154be5713c46b007ae0a4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
killpg should be being called with a pgid, not a pid.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, we see runqemu and qemu-system-* processes left behind when
bitbake is killed by buildbot. This is due to the use of setpgrp() in
the runqemu subprocess call.
We need the setpgrp call so that all runqemu processes can easily be
killed (by killing their process group). This presents a problem if this
controlling process itself is killed however since those processes don't
notice the death of the parent and merrily continue on.
Rather than hack runqemu to deal with this, we add something to
qemurunner, at least for now to resolve the issue. Basically we fork off
another process which holds an open pipe to the parent and also is
setpgrp. If/when the pipe sees EOF from the parent dieing, it kills the
process group. This is like pctrl's PDEATHSIG but for a process group
rather than a single process.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a task shows an error, the full log is surpressed since bitbake assumes
the user has been shown what is wrong. In this code path that isn't the
case and its much more helpful to show the user the full error. Therefore
show a warning instead to aid usability.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When two or more tests had the same name but different classes then
the decorator log whould have the output all wrong. This was because
a comparison which was made only between method names but now it
compares classes too.
[YOCTO #8029]
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if qemu segfaults, the tests merrily continue trying to execute
which takes time for them to timeout and is a bit silly. Worse, no logs about
the segfault are shown to the user, its silent!
This patch tries to unravel the tangled web of issues and ensures that we:
* install a SIGCHLD handler which tells the user qemu exited
* check if qemu is running, if it isn't fail the test outright
* don't leave processes behind in sshcontrol which would hold
bitbake.lock and block shutdown
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a test case is decorate by oeqa.utils.decorators.tag, this case will
by add a tag, testrunner will filter these tags by TEST_SUITES_TAGS
[YOCTO #7849]
Signed-off-by: zjh <junhuix.zhang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This changes the behavior when data was not received over
the serial console when a command is run. With this the
socket is no longer closed but it throws and exception that
can handled in upper layers. With this the test can continue
without throwing errors for not having the socket anymore.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds an instance of HostDumper to qemurunner,
with this instance now is possible to get dumps
from the host when there is an error.
This adds dump points in the next cases:
- runqemu exits before seeing qemu pid
- Fail to get qemu process arguments
- Not reach login banner before timeout
- qemu pid never appears
This also modifies the constructors of BaseDumper,
HostDumper and TargetDumper, they don't require
the datastore anymore, but the feature to replace
datastore variables has been lost (never used)
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the commandlist isn't available, the code currently gives a backtrace.
At least stop doing that and return more gracefully.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows to have datastore variables in the dump
commands and will get the data when a new instance
it's created.
Also this remove special cases from the commands.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
It makes sense to separate the dump commands from the
oeRuntimeTest class, this way it can be used in all
the test context.
These are the changes included in this patch:
- Created classes: BaseDumper, HostDumper, TargetDumper
- Create an instance of HostDumper in imagetest.bbclass
and add it to TestContext class, this way any class
that have access to the TestContext would be able
to dump logs from the host
- Create an instance of TargetDumper in QemuTarget
class after get the runner, this way it is
accessible during the tests.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
EAGAIN/EWOULDBLOCK can be followed by no data. So don't tight loop
waiting for data.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On a nonblocking socket an exception can be generated for the EAGAIN
and EWOULDBLOCK errnos. Since these aren't actually errors make sure to
retry rather than bailing out.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Before this change on a test failure an exception would be generated due
to runqemu being killed before the logging thread which was on the other
end of the socket.
The exception was actually correct saying there was no data on a socket
marked readable, but this was because the qemu process was killed before
the listener thread.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The option was added so that the qemurunner could start a second tcp
serial port without adding machine conditional logic to qemurunner.
The issue that made this necessary was that when "virt" is passed to
qemu-system-aarch64, the normal mechanism for specifying a tcp serial
port does not work. This is because the hardware for the "virt" machine
is hardcoded in the device tree blob and the addition devices must be
virtio devices.
So runqemu can specify virtio for qemuarm64 whereas it seems all other
qemu machines work with the "-serial tcp*" option.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu can freeze and stop responding if the socket buffer connected to a tcp
serial connection fills up. This happens of course when the reader of
the serial data doesn't actually read it.
This happened in the qemurunner code, because after checking for the
"login:" sentinel, data was never again read from the serial connection.
This patch solves the potential freeze by adding a thread to continuously
read the data from the console and log it. So it also will give a full log
of the console, rather than just up to the login prompt.
To simplify this patch, another serial port was also added to use for the
sole purpose of watching for the sentinel as well as being the interactive
serial port. This will also prevent the possibility of lots of debug
data on the console preventing the sentinel value from being seen due to
interleaved text.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
So that create_socket() can be called more than once to create sockets,
it now returns the socket and port rather than setting class variables
directly.
create_socket() now only uses exceptions for errors, not the return
value from the function.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The bootlog and qemusock variables were set in the class as part of the
create_socket() routine. However those variables are never used outside
of the same function and thus serve no purpose as class variables.
This initializes those variables near where they are used.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Use '.' instead of 'source' so this works with dash as /bin/sh.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This allow to search for the prompt after a command is
run so it can avoid waiting for the timeout.
Also corrected identation issues
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Raw mode allows to send the command without sending
'echo $?' for validation; Also this doesn't remove the
command or the prompt from the output returned. In raw
mode validation is done if there is output.
This raw mode would be useful for validate the prompt
when a user logs in.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This adds the automatic login after the target
finished booting. If the automatic login fails
it won't stop the target or any test, it would
only send a log to the file.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The only need for the console before this patch was
to check if the target has booted. This allows to send
commands to the terminal.
This new method is based on the method with the same name
of the QemuTinyRunner class. The difference here is it will
remove the command and the prompt. The other diference is
it will send an echo $? to check if the last command was
successful.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Aníbal Limón
Francisco Pedraza
Ed Bartosh
Ed Bartosh
Ross Burton
Mariano Lopez
Leonardo Sandoval
Paul Eggleton
Lucian Musat
Richard Purdie
Aníbal Limón
zjh
Randy Witt