| Age | Commit message (Collapse) | Author |
|---|
|
The 5s timeout for non-kvm is too short, especially when the load is high,
which leads to unexpected errors, so set timeout to 60s by default.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
So that both QEMU_USE_KVM = "True" and "1" will work.
[YOCTO #12343]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The logger handling in oeqa was confused at best. This patch:
a) Passes in a logger through various qemu runner pieces
b) Uses that logger consistently in the code
c) Creates a logger for QemuRunner outside the bitbake namespace
meaning we don't conflict with the tinfoil logging changes
The result of this is more consistency. For runtime tests in testimage,
the logs always contain the debug info, nothing is shwon on the console.
For the oe-selftests, logs are intercepted and only shown if the test
fails.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This funciton appears completely unused, drop it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default, QemuRunner avoids modifying the image files that it boots
into by enabling the qemu snapshot mode. However, some tests may want
to test changes that must persists across reboots, so this mode
should be optional.
This can be combined by copying the image file to a temporary location
first and then booting with that copy. It's also useful when testing
with additional drives attached to a virtual machine.
QemuTinyRunner doesn't use the snapshot parameter and therefore ignores
the new parameter.
Long term, a better way of passing these various configuration
parameters should be used, and perhaps QemuRunner and QemuTinyRunner
can be merged into one again to avoid code duplication. But for now
the patch follows the exiting style.
Also beware that QemuTarget.start() now acts in two different modes
(with or without explicit launch command), and depending on that mode
parameters like discard_writes must be ignored, i.e. not get passed to
launch().
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, QEMU_USE_KVM=True enabled the use of kvm only when "x86"
was in the MACHINE name. That is too limiting, because for example
intel-corei7-64 can also use kvm but it wasn't possible to enable that
without changing OE-core.
That traditional usage is still supported. In addition, QEMU_USE_KVM
can be set to a list of space-separated MACHINE names for which kvm is
to be enabled.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bb.note prints multiple same lines when invoke this class again, but
if we set mainlogger.propagate = False, nothing would be printed,
according to logging's document:
https://docs.python.org/3/library/logging.html
Note
If you attach a handler to a logger and one or more of its ancestors, it
may emit the same record multiple times. In general, you should not need
to attach a handler to more than one logger - if you just attach it to
the appropriate logger which is highest in the logger hierarchy, then it
will see all events logged by all descendant loggers, provided that
their propagate setting is left set to True. A common scenario is to
attach handlers only to the root logger, and to let propagation take
care of the rest.
We may need avoid using bb.note or bb.warn in oeqa since it attaches
multiple log handlers which may cause confusions
This patch only sets "mainlogger.propagate = False" in
selftest/runqemu.py and use logger.info to replace bb.note in
targetcontrol.py to minimize the impact.
[YOCTO #10249]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Modify the following files to test runqemu:
targetcontrol.py
utils/commands.py
utils/qemurunner.py
We need simulate how "runqemu" works in command line, so when test
"runqemu", the targetcontrol.py, utils/commands.py and
utils/qemurunner.py don't have to find the rootfs or set env vars.
[YOCTO #10249]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some commands might need to run longer than the default timeout of
five seconds. If that occurred, run_serial() returned with a status
code of zero (sic!) and no other indication of what went wrong.
Now the timeout is configurable (with five still the default) and
an explicit warning ("<<< run_serial(): command timed out after 5 seconds without output >>>")
gets appended at the end of the data returned to the caller.
While at it, the logic for checking for the timeout was updated a bit
because both implementations could overshoot the timeout when entering
select() right before the final deadline.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
qemu runner picks up first fsimage type from the hard-coded
list of supported types. This makes it impossible to test
particular image type unless it's not ext4(first type in
the hardcoded list of types).
Added image_fstypes argument to commands.runqemu and QemuTarget
__init__ to specify type of the image to run qemu with.
This will be used to pass wic image type to test efi wic images.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added possibility to pass additional runqemu parameters
down the stack of APIs:
commands.runqemu -> QemuTarget.start -> QemuRunner.start
This will be used to pass ovmf parameter in testing of
efi wic images under qemu.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rather than copying images, use the snapshot option to qemu. This fixes a regression
caused by the recent runqemu changes where the wrong images were being testes since
the image is copied without the qemuboot.conf file. This means the latest image is
found by runqemu rather than the specified one, leading to various confused testing
results.
It could be fixed by copying more files but use snapshot mode instead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using kvm can provide significant speedups when running qemux86* machines
on an x86* host. Enabled by using the new QEMU_USE_KVM variable.
[YOCTO #9298]
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now Runner's support extra_bootargs for the kernel so add
extra_bootparams to the start() methods to avoid exception.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
cmdline
Add ability to specify extra_bootargs (kernel cmdline) in order to enable systemd
debug log in images that enables systemd init.
[YOCTO #9299]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch contains all the other misc pieces of the transition to
python3 which didn't make sense to be broken into individual patches.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added 'wic' to the list image types supported by targetcontrol.
This is a preparation for booting and testing wic images
with oe-selftest.
[YOCTO #8498]
(From OE-Core rev: 7dda053fbd1ea1354b7720cfa691470ba88ef5b9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added new parameter 'ssh' to targetcontrol 'start' method
to be able to test images without running ssh server.
[YOCTO #8498]
(From OE-Core rev: 1c3c66aadd43092bc19242b0651ee810cc31fe7c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if qemu segfaults, the tests merrily continue trying to execute
which takes time for them to timeout and is a bit silly. Worse, no logs about
the segfault are shown to the user, its silent!
This patch tries to unravel the tangled web of issues and ensures that we:
* install a SIGCHLD handler which tells the user qemu exited
* check if qemu is running, if it isn't fail the test outright
* don't leave processes behind in sshcontrol which would hold
bitbake.lock and block shutdown
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds an instance of HostDumper to qemurunner,
with this instance now is possible to get dumps
from the host when there is an error.
This adds dump points in the next cases:
- runqemu exits before seeing qemu pid
- Fail to get qemu process arguments
- Not reach login banner before timeout
- qemu pid never appears
This also modifies the constructors of BaseDumper,
HostDumper and TargetDumper, they don't require
the datastore anymore, but the feature to replace
datastore variables has been lost (never used)
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It makes sense to separate the dump commands from the
oeRuntimeTest class, this way it can be used in all
the test context.
These are the changes included in this patch:
- Created classes: BaseDumper, HostDumper, TargetDumper
- Create an instance of HostDumper in imagetest.bbclass
and add it to TestContext class, this way any class
that have access to the TestContext would be able
to dump logs from the host
- Create an instance of TargetDumper in QemuTarget
class after get the runner, this way it is
accessible during the tests.
[YOCTO #8118]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
This patch modify three files altought two of them
are minimal modifications. This version includes
the changes proposed by Paul.
testimage.bbclass:
Create new vars for easy modification of the dump
directory and commands to be run on host and target
when a test fails
TESTIMAGE_DUMP_DIR: Directory to save the dumps
testimage_dump_target: Commands to run on target
testimage_dump_host: Commands to run on host
oetest.py:
- Allow to use the vars defined in testimage class
- Now able to run commands in the host and dump the
results
- Fix an issue with the condition where to run the
dump commands (Before it run the commands every
test after a failure, now it runs the commands only
in tests that failed)
- Fix the output to stdout
[YOCTO #8118]
(From OE-Core rev: 26fe645457633f90bb5ddbb12f5f7b9ca4a06cc5)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We've had a few cases on the autobuilder where we've lost logs of
the boot and been unable to debug it further. Show this information
onto the console to be more useful.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we use this outside of testimage we don't have a task log; so let's
just explicitly write the log output to a file all the time so it's
always there to look at (particularly useful when runqemu exits
immediately with an error.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test directory might not exist at this point so just go ahead and
create it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rather than just use d.getVar(X), use the more explict d.getVar(X, False)
since at some point in the future, having the default of expansion would
be nice. This is the first step towards that.
This patch was mostly made using the command:
sed -e 's:\(getVar([^,()]*\)\s*):\1, False):g' -i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no good reason not to use ext4 at this point, it has advantages
and few drawbacks. Therefore switch the qemu machines over (and the default
runqemu script options).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
the resulting value check.
Because we used a bb.fatal call inside the get_image_fstype classmethod, this caused problems when accessed without instantiating the object with a valid bb environment.
Separating the matching part of the classmethod(that is usable by outside scripts) from the check of the resulting value.
The matching is done within a new classmethod and the latter keeps the old method name and internal functionality, this way we don't have to change any other target controllers code.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
controllers
YB: #6254
Add a new classmethod that can be used by outside scripts to get the extra files needed by the target controllers.
An outside script can predict rootfs, manifest and kernel files needed by a target controller, but sometimes there are other files needed.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
YB: #6375
Added a new method get_image_fstype() that autodetermines what fstype to use for the rootfs file.
This method uses a new list variable 'supported_image_fstypes' that contains image fstypes supported by the target controller.
This method is also a classmethod which means outside scripts can get the image fstype.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If we couldn't start the target, it doesn't make sense to try and stop
it here since logically it shouldn't now be in any kind of "started"
state. (It's the start function's job to clean up after itself if it
fails - to that end, fix up the QemuTarget class so that it does.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
And drop the un-needed and un-used restart methods.
Only qemu ever used this and actually does it safely.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was wrong and if one would do TEST_TARGET = "SimpleRemoteTarget"
instead of TEST_TARGET = "simpleremote" it would complain
that there is no such controller when there is.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We had the ability to use a custom port for the ssh connection,
but we weren't using it.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This should make it clear what methods a subclass
needs to redefine.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
For the SimpleRemote target where we need the host ip and
it wasn't set in conf, we tried to determine it automatically.
However ip route output isn't the same for every network, we
need the last field from the first line.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use a python module "folder" rather than a single module within
layers to ensure multiple layers can define a TEST_TARGET class.
Current implementation using controllers.py module will only allow
a single layer to define test targets.
Add a controllers folder as well as a TestTargetLoader class whose
job is to load the given TEST_TARGET class from any number of
python modules within the oeqa/controllers/ directory of any
layer.
The only condition will be that layers will need to ensure
the TEST_TARGET class name they provide is unique otherwise there
is no guarantee which class is instantiated. a bb.warn is used
to alude to this if it happens.
Signed-off-by: Sipke Vriend <sipke.vriend@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allows a layer to define new classes in <layer>/lib/oeqa/utils/controllers.py
and completely control or extend deployment of a target. (core currently
has QemuTarget and SimpleRemoteTarget).
The value of TEST_TARGET must be the name of the new class.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
targets
Add a new module which abstracts the target object used by testimage.bbclass
The purpose of this module is to move the deployment of a target from testimage.bbclass,
basically abstracting different implementations of how we setup a target and how it runs commands.
It allows to select one implementation or another by setting TEST_TARGET (currently to: "qemu" and "simpleremote").
QemuTarget is used to start a qemu instance (as it's currently done in testimage.bbclass)
SimpleRemoteTarget is meant for a remote machine (by setting TEST_TARGET_IP) that's already up and running
with network and ssh.
Simply put, it opens the door for running the tests on different types of targets by adding new classes
(maybe qemu-nfsroot or remote-special etc.). One could also override BaseTarget which currently uses
the existing SSHControl module and add a serial implementation.
[ YOCTO #5554 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Robert Yang
Richard Purdie
Patrick Ohly
Ed Bartosh
Joshua Lock
Bill Randle
Aníbal Limón
Mariano Lopez
Paul Eggleton
Lucian Musat
Corneliu Stoicescu
Stefan Stanacar
Sipke Vriend