Age | Commit message (Collapse) | Author |
|
The hello-mod recipe is unusual in that it has only local files in
SRC_URI and builds these out of ${WORKDIR}. When you use devtool modify
on it, devtool puts all of those files in an "oe-local-files"
subdirectory of the source tree, which is not ${S} (or ${B}) any more
and thus building the recipe afterwards fails. It's a bit of a hack, but
symlink the files in oe-local-files into the source tree (and commit the
symlinks with an ignored commit so that the repo is clean) to work
around the problem. We only do this at time of extraction, so any files
added to or removed from oe-local-files after that won't be handled, but
I think there's a limit to how far we should go to support these kinds
of recipes - ultimately they are anomalies.
I initially tried a hacky workaround where I set effectively set B =
"${WORKDIR}" and that allowed it to build, but other things such as the
LIC_FILES_CHKSUM checks still broke because they expected to find files
in ${S}. Another hack where I set the sourcetree to point to the
oe-local-files subdirectory works for hello-mod but not for makedevs
since whilst that is similar, unlike hello-mod it does in fact have
files in the source tree (since it has a patch that adds COPYING) and
thus the same issue occurred.
Also tweak one of the tests that tries devtool modify / update-recipe on
the makedevs recipe to try building it since that would have caught this
issue.
Fixes [YOCTO #10616].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you have a file:// entry in SRC_URI with a subdir= parameter that
makes it extract into the source tree, then when you update that file in
oe-local-files and run devtool update-recipe then you want the original
file to be updated. This was made to work by OE-Core commit
9069fef5dad5a873c8a8f720f7bcbc7625556309 together with
31f1bbad248c36a8c86dde4ff57ce42efc664082, however until now there was no
oe-selftest test to verify it.
Note that in order to succeed this test also requires the fix
"lib/oe/recipeutils: ignore archives by default in
get_recipe_local_files()" since the test recipe uses a local tarball.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is possible to use gzip or bzip2 to compress patches and still refer
to them in compressed form in the SRC_URI value within a recipe. If you
run "devtool modify" on such a recipe, make changes to the commit for
the patch and then run devtool update-recipe, we need to correctly
associate the commit back to the compressed patch file and re-compress
the patch, neither of which we were doing previously.
Additionally, add an oe-selftest test to ensure this doesn't regress in
future.
Fixes [YOCTO #8278].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a test to ensure devtool update-recipe works properly on recipes
that contain only local files (since the other tests we have didn't test
that).
Relates to [YOCTO #10563].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When you run devtool add on a source tree we attempt to figure out the
correct name and version for the recipe. However, despite our best
efforts, sometimes the name and/or version we come up with isn't
correct, and the only way to remedy that up until now was to reset the
recipe, delete the source tree and start again, specifying the name this
time. To avoid this slightly painful procedure, add a "rename"
subcommand that lets you rename the recipe and/or change the version.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a variable is being set in the recipe when we've explicitly passed
None as the value to _test_recipe_contents() indicating that it
shouldn't be set at all, then we should be printing out the variable
name in the assertion message but it seems like I forgot to do a
substitution. Also include the value for informational purposes.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
recipetool sets the LICENSE value based on licenses detected from the
source tree. If there are multiple licenses then they were being
separated by spaces, but this isn't actually legal formatting and if
you're using "devtool add" you get a warning printed when devtool
parses the recipe internally.
Earlier I had made a conscious decision to do it this way since it's up
to the user to figure out whether the multiple licenses should all apply
(in which case they'd be separated with &) or if there is a choice of
license (in which case | is the correct separator). However, I've come
to the conclusion that we can just default to & and then the ugly
warning goes away, and it's the safest alternative of the two (and most
likely to be correct, since it's more common to have a codebase which is
made up of code with different licenses, i.e. all of them apply to the
combined work).
I've tweaked the comment that we add to the recipe to explicitly state
that we've used & and that the user needs to change that if that's not
accurate.
Fixes [YOCTO #10413].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
OE-Core commit d3057cba0b01484712fcee3c52373c143608a436 fixed handling
of wildcard bbappends, which means that this test's expectations about
the bbappend file name are no longer met. devtool finish is meant to use
wildcard bbappends so fix the test accordingly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a subcommand which will "finish" the work on a recipe. This is
effectively the same as update-recipe followed by reset, except that the
destination layer is required and it will do the right thing depending
on the situation - if the recipe file itself is in the workspace (e.g.
as a result of devtool add), the recipe file and any associated files
will be moved to the destination layer; or if the destination layer is
the one containing the original recipe, the recipe will be overwritten;
otherwise a bbappend will be created to apply the changes. In all cases
the layer path can be loosely specified - it could be a layer name, or
a partial path into a recipe. In the case of upgrades, devtool finish
will also take care of deleting the old recipe.
This avoids the user having to figure out the correct actions when
they're done - they just do "devtool finish recipename layername" and
it saves their work and then removes the recipe from the workspace.
Addresses [YOCTO #8594].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Current parsing was picking wrong targets, leading to the following problem:
AssertionError: Command 'bitbake Parsing recipes..done. -e' returned non-zero exit status 1:
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sets are safer when comparing internal elements and positions are not
important. This commit avoid errors observed on python3 builds as reported
on the below bugzilla entry.
[YOCTO #9661]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python3 standardises its use of iteration operations. Update
the code to match the for python3 requires.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If fetching source from a git repository, typically within OpenEmbedded
we encourage setting SRCREV to a fixed revision, so change to do that by
default and add a -a/--autorev option to use "${AUTOREV}" instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1418 test_recipetool_create_cmake
1422 test_qemu
1423 test_devtool_add_git_local
1433 test_devtool_upgrade_git
1434 test_sanity_unsafe_binary_references
1435 test_read_only_image
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that make/remake needs a PREFERRED_PROVIDER, we need to set this
correctly during tests.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When we add from a fetched URL we are supposed to turn the resulting
source tree into a git repository (if it isn't already one). However, we
were using the older deprecated option name here instead of the
positional argument, so "devtool add -f <url>" resulted in the repo
being created but "devtool add <url>" didn't, which was wrong.
Also update the oe-selftest tests to check that this worked.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is not the correct way to handle this - it significantly increases
the time taken to run oe-selftest anywhere MACHINE is set to some other
value (for example "qemux86-64"), because all of the artifacts for
qemux86 need to then be built as well when running the test. If we need
to skip these tests on non-QEMU machines, the devtool test already
demonstrates how to do that.
This reverts commit 169e1eaa4fc5ed03e2307b68686a7f5b1db37a36.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a test for devtool upgrade with a recipe pointing to a git
repository, since this uses several different code paths.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Use a more real-world test of a recipe pointing to a remote file
* The cleanup tracking / teardown commands need to be added towards the
top, or they won't have the desired effect of cleaning up if the test
fails.
* Check that a versioned subdirectory gets renamed to match the new
version
* Ensure the recipe contents gets changed as we expect it to
* Check that the recipe directory is deleted by devtool reset at the end
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Removed unused parameter 'test' from runqemu function.
(From OE-Core rev: c688b3bcbb57099fa72a9728bc708b109802f7fc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a test so we validate the following recently implemented/fixed
aspects of "devtool add":
* Adding from a local directory with no name specified
* Auto-detecting the name and version from autoconf files
* Setting SRC_URI and S from the local git repo
* Showing the recipe file path in "devtool status" if it has been
created within the workspace
Incidentally also tests:
* LICENSE and LIC_FILES_CHKSUM detection (though just for this piece of
software)
* Extracting a dependency from autoconf (though just for this narrow
case since there's only one)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's going to be more common for users not to have the prepared source
tree for a recipe already, so the default behaviour ought to be to
extract it for them from the recipe. Change the default to extract
(effectively making the -x option a no-op) and add a --no-extract/-n
option to disable it. Later we can look at trying to be smart and
reusing an existing source tree instead of erroring out if it exists;
for now this is just the default reversal.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When you run devtool build, you need to have the pkgdata written out at
the end, so that if what you're adding is a library and the next thing
you add is something that depends on that library, the necessary
information to map the dependency back to the recipe is present. In
practical terms all this means is we need do_packagedata to run in
addition to do_populate_sysroot.
This does mean that do_package needs to run which wasn't running before,
and that means that the few package QA tests that run within do_package
such as installed-vs-shipped will now be run. This may be a bit
bothersome, and prompted a fix for one of our oe-selftest tests as a
result, but I don't see an easy way around it. Ultimately if you care
about using the recipe in an image you'll need to fix any such errors
anyway.
Fixes [YOCTO #8887].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If Python is in the sysroot then this test can fail due to some
brokenness in libftdi's CMakeLists.txt file for its python bindings.
Just disable it in order to have the test work more reliably.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
1391 for test_devtool_add_fetch_simple from devtool
1392 for test_recipetool_create_simple from recipetool
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The devtool and recipetool tests do literal string comparisons, but for some
fields the ordering could be irrelevant and potentially non-deterministic. For
example, the recipetool_create_simple test started failing with:
AssertionError: 'GPLv2 Unknown' != 'Unknown GPLv2' : values for LICENSE do not match
The ordering of the LICENSE field isn't relevant. So, if the expected value is
a set(), split the string into a set too and compare those.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It makes sense for tests that use runqemu to have MACHINE set as qemu.
This also avoid issues when running oe-selftest with --arch random/all
option.
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
test_devtool_deploy_target is failing on the Yocto Project autobuilder
apparently when it attempts to cut out some fields from the list. It
doesn't fail here and I can't see what the problem lines are, so add a
check for lines with too few fields so we can get a look at them next
time it fails.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add an oe-selftest test case for the newly supported syntax with only
the remote URL specified (auto-detecting name and version).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Often the filename (e.g. source tarball) contains the name and version
of the software it contains.
(This isn't intended to be exhaustive, just to catch the common case.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some build systems (notably autotools) support declaring the name and
version of the program being built; since we need those for the recipe
we can attempt to extract them. It's a little fuzzy as they are often
omitted or may not be appropriately formatted for our purposes, but it
does work on a reasonable number of software packages to be useful.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For subcommands that don't actually involve the workspace, don't
auto-create the workspace.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fix test_devtool_update_recipe_git to work when build directory is not
inside COREBASE.
Fixes [YOCTO #8639].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Added testcase decorators for testopia integration.
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In selftest we want to exercise devtool's ability to use plugins from other
layers, so add a basic command to reverse a string to meta-selftest and a test
in oe-selftest to call it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For modify / extract / upgrade, if the specified "recipe" is not
actually a recipe but a virtual target such as virtual/kernel, map it
correctly to the actual recipe and make sure we use that name within the
workspace. Thanks to Chris Larson for reminding me this was still broken
and for a hint on how to fix it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
New method for checking the status of the working tree of a repository.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Removes some code duplication.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
In order to remove some code duplication. The method currently only
does checking of workspace dir.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Upon further reflection, it seems to me that this bbappend ought to just
be deleted at the end of the build. This keeps things simple; you never
have to remember to delete any files to get back to where you were
before with the image. This means we can also drop the slightly awkward
message reminding the user how to do that. I've also updated the test to
look at the image manifest to determine if the command has worked
instead of looking for the (now deleted) bbappend.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enhance the logic behind the 'auto' mode a bit by only updating the
SRCREV if the changes are already found upstream. The logic is simple:
update SRCREV only if the current local HEAD commit is found in the
remote branch (i.e. 'origin/<branch_name>'). Otherwise resort to
patching.
This affects a couple of the oe-selftest tests so update those as well.
[YOCTO #7907]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upgrades a recipe to a particular version and downloads the source code
into a folder. User can avoid patching the source code.
These are the general steps of the upgrade function:
- Extract current recipe source code into srctree and create a branch
- Extract upgrade recipe source code into srctree and rebase with
previous branch. In case the rebase is not correctly applied, source
code will not be deleted, so user correct the patches
- Creates the new recipe under the workspace
[YOCTO #7642]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added test case to test functionaly of build-image plugin:
Add two packages to workspace and run 'devtool build-image
core-image-minimal'.
Checked if command is successful.
Checked if expected package is added to generated
core-image-minimal.bbappend file.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
|
|
I'd somehow missed the existence of fail() when I wrote these. It's
preferable here so you don't get the somewhat useless "false is not
true" message in the case of failure.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If a recipe is BBCLASSEXTENDed (e.g. to -native), its PN value and the
name of the bbappend will be different; we were assuming them to be the
same when reading in the workspace, leading to us seeing the base recipe
name everywhere afterwards.
Also add a test so we ensure this doesn't regress in future.
Fixes [YOCTO #8157].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We don't need to run bitbake -c cleansstate on this because it's being
cleaned out as part of "devtool reset".
Addresses [YOCTO #8031].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the common code we now have to run QEMU instead of running it
ourselves, avoiding reliance on the machine showing up at 192.168.7.2.
This also makes a copy of the image rather than using -snapshot so if we
need to inspect the image after a failure, we can.
Fixes [YOCTO #7928].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|