Age | Commit message (Collapse) | Author |
|
Currently this is three test cases:
1) test_python_exists. Fail if python3 isn't in PATH.
2) test_python_stdout. Run a Python script and check the output is as expected
3) test_python_testfile. Check that a file test_python_stdout wrote to exists.
(1) should be a setup and skip the test module if it isn't present.
(2) and (3) should be merged, there's no point copying over a two line Python
file, and the test doesn't verify that the file doesn't exist in the first
place.
Rewrite the test to check that Python is present in a class setup so the entire
test is skipped if it isn't and do some simple rot13 to verify that bytecode is
being executed correctly.
(From OE-Core rev: a35be5f32b4fe70b18ac1e2eccfd94558cecfbba)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
For example, core-image-sato skipped the test alltogether, as it
no longer pulls in Python 2.x at all.
(From OE-Core rev: 5ad0fe9ac6b6362011a17afaa7bee8e788093915)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
The test cases assume that rpm-doc is built out, as it says it its
comment. This is not always true. And it sometimes results in
following error.
| cls.tc.target.copyTo(test_file, dst)
| UnboundLocalError: local variable 'test_file' referenced before assignment
Change to use base-passwd-doc, as this package is more likely to be
built out than rpm-doc.
(From OE-Core rev: 2e23543b48921182307065c1fa9e8b9d7fbb3cdc)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
As I will be leaving Intel, this address will no longer be valid,
so swap it for my personal one for now.
(From OE-Core rev: ea58ff101e28dfda3410de66d775df3d8a1e5a96)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
There are failures when multiple users run oe-selftest on the same
host:
PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved-
tests/201812250324_qemu'
This is because /tmp/oe-saved-tests was created by user A, while user B tries
to write data in it, then the error will happen. This patch can fix the
problem.
Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than
/tmp/oe-saved-tests/ to fix the problem.
(From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Add test cases to test “exclude” and “installroot“ options, also modify
the logic of filtering packages on the feed to have all the packages
needed by the tests.
[YOCTO #10744]
(From OE-Core rev: 1121806603c6f621d084b692216f3f616a0768dc)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
This allows the ptest results from ptest-runner, run in an image to be
transferred over to the resulting json results output.
Each test is given a pass/skip/fail so individual results can be monitored
and the raw log output from the ptest-runner is also dumped into the
results json file as this means after the fact debugging becomes much easier.
Currently the log output is not split up per test but that would make a good
future enhancement.
I attempted to implement this as python subTests however it failed as the
output was too confusing, subTests don't support any kind of log
output handling, subTest successes aren't logged and it was making things
far more complex than they needed to be.
We mark ptest-runner as "EXPECTEDFAILURE" since its unlikely every ptest
will pass currently and we don't want that to fail the whole image test run.
Its assumed there would be later analysis of the json output to determine
regressions. We do have to change the test runner code so that
'unexpectedsuccess' is not a failure.
Also, the test names are manipuated to remove spaces and brackets with
"_" used as a replacement and any duplicate occurrences truncated.
(From OE-Core rev: a13e088942e2a3c3521e98954a394e61a15234e8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test_file_connman should be executed only when 'lib32-connman' is
installed and 'connman' is not installed.
When lib32-connman and connman are both installed, the /usr/sbin/connmand
could be from connman or lib32-connman, depending on the installation
order. What we want to check is the connmand command from lib32-connman,
so we need to make sure that connman is not there to cause chaos.
(From OE-Core rev: bc6839394c06bb695b92b2183337e7381da1e86c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
1) The test cases use 'readelf' command to do the check. This command
is from binutils. So skip the test if the needed binutils package is
not installed.
The related error message in log.do_testimage is like below.
Output: sh: readelf: not found
2) The test case tests /lib/libc.so.6 from lib32-libc6. So skip the test
if lib32-libc6 is not installed.
The related error message in log.do_testimage is like below.
Output: readelf: Error: 'lib/libc.so.6': No such file
(From OE-Core rev: eae929a5c224f5c3468d6a0466d1bbb3f678a5a1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
This test case should only run when rpm package is installed.
So skip it if rpm package is not installed. This fixes:
RESULTS - rpm.RpmBasicTest.test_rpm_help - Testcase 1059: FAILED
(From OE-Core rev: bb909a60c04248d015d988e4454f0a11b1c287da)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
|
|
Add runtime test for stap to test basic SystemTap
operations: can compile very basic module and run on
target device.
Note we disable (-DSTP_NO_VERREL_CHECK) SystemTap
additional kernel release check since during OE testing
mismatching kernel-devsrc and kernels are used.
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Kernels which use tools/objtool can now fail when building external modules
due to objtool being missing, the generated files can also cause problems
for kernel-devsrc.
Ensure objtool is generated in make-mod-scripts by also calling
"make prepare".
For devsrc, delete the generated binaries since they'd be native
binaries and unsuitable for the target.
The oeqa kernel module tests also need to have the additional "make prepare"
step added.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add runtime test for opkg to test that it can install ipk
package from remote source.
[YOCTO# 11488]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add runtime test for apt to test that it can install deb
package from remote source.
[YOCTO# 11488]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
(From OE-Core rev: 497a95b576e19e39e20ac280d0db24f51b7c9679)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We see occasional network glitches which break this test. Use our own
mirror (which has a .gz instead of .bz2) to avoid the errors, we're not
trying to test network connectivity.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
That's the whole point isn't it? Previously this testcase succeeded
even if some of the underlying on-target tests failed; the only way
to find out if anything was wrong was to manually inspect the logs.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
only when ptest-runner is availalble;
Previously the test would execute only when all available ptests
for packages in the image were installed; some of those tests may
be broken, never finish, take a very long time or simply irrelevant
to the user who wants to check ptests of only a few specific packages,
and does so by listing them explicitly via IMAGE_INSTALL_append or similar.
Presence of ptest-runner means there is at least one ptest package installed
as they pull it in via a class dependency; ptest-runner is not generally
installed otherwise.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It works now.
[YOCTO #11547]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The packages' test cases maybe skipped, check and save them.
[YOCTO #11547]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Make it work with current oeqa
* Skip the test if ptest is not in DISTRO_FEATURES
* Skip the test if ptest-pkgs is not in IMAGE_FEATURES
* The logs are saved to:
testimage/ptest_log -> testimage/ptest_log.<datetime>
* This provides data that could be used to detect regressions in ptest results
[YOCTO #11547]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
THe newner kernels have ope firmware support enabled which leads to warnings
during boot on mips. These aren't interesting and we should ignore them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Buildiptables test cases are conflicting with images built with “musl”
as standard C library, in order to avoid those issues lzip package was
selected to be used on the tests as this does not have any "musl"
dependency.
This patch is applicable for testimage tests
[YOCTO # 11713]
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The OEQA framework has internal methods for provide functionality
in decorators so Test components aren't expected to override it.
Use the base unittest methods for setUp and tearDown.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This error is seen on the Braswell RVP platform we have been using for
testing. The error is caused by atkbd.c keyboard driver, which is only
for AT and PS/2 keyboards. I tested a PS/2 keyboard with the board,
which worked fine, and the board does not have a separate AT connector,
so this error won't cause any functional issues.
[YOCTO #10110].
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The NUC6 has issues bringing up Bluetooth early in the boot sequence. We
see:
[ 4.091790] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 4.097326] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 4.145317] Bluetooth: hci0: Failed to send firmware data (-38)
Followed by this later on:
[ 11.509870] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 11.509988] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 13.090308] Bluetooth: hci0: Waiting for firmware download to complete
[ 13.090829] Bluetooth: hci0: Firmware loaded in 1549114 usecs
[ 13.090987] Bluetooth: hci0: Waiting for device to boot
[ 13.101958] Bluetooth: hci0: Device booted in 10818 usecs
Bluetooth does successfully come up and the firmware is loaded. This
behavior is consistent across all kernels I've tested.
[YOCTO #10628].
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Rather than hard-coding the tmpdir for TargetBuildProject to /tmp allow the
parent's default handling to define an appropriate tmpdir.
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the corresponding Testopia ID to the test cases for dnf
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There were two missing cases to be migrated to the new framework: _qemutiny and
_ptest.
qemutiny was straightforward.
ptest on the other hand wasn't working even in previous releases; it has been
migrated from smart to dnf, and how ptest packages are gathered to be
installed, adapted to use unicode, and removed a lot of code that wasn't needed
anymore.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using RPM deploy dir was causing errors when pre-built images were
used with these steps:
https://wiki.yoctoproject.org/wiki/Quality_Assurance_yocto_project
[YOCTO #11173]
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We currently fetch,configure,build, and install cvs as our test for the
sdk. cvs unfortunately, requires a default editor in order to run. The
change in 94790a8254d6 that checks to see if you have something like vi
installed is fragile since you may have a different default editor. This
patch switches from using cvs as a test to using cpio. cpio also uses
autotools so the functionality tested is equivalent.
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
All documentation refers to dnf binary as 'dnf' yet make install
does not create one - it's done by Fedora's spec file when building
the rpm. Let's replicate this behavior.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
|
|
The idea on getTarget is to use kwargs to send custom variables
to different targets, instead of this, a new variable was added
(just used for custom targets) and this broke testexport. So
in order to fix it, just add the custom variable to kwargs.
This fixes the use of getTarget() in testexport class that was
introduced in 1dc8010afd71fe46fb28bb86fb7c07a5fbd3d7cf.
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This patch implements custom target loading for testimage, currently
missing due to major changes to the test framework.
Custom targets can be defined in various meta-layers, so we
need an extra path information in order to find them.
Any other additional info is retrieved as usual via the variables
TEST_TARGET and TEST_SUITES
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Printing a message which says "configure failed" without the log output
is effectively useless. If a command fails, print the output by default
and simplify the calling code which makes debugging any of these failures
much easier.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Debian based distros has a builtin syslog module so when
try to load tests using unittest it references the builtin
module instead of runtime/cases.
[YOCTO #10964]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
gcc: Removed unneded lines.
multilib: fixed case number.
syslog: added a missing test.
[YOCTO #10964]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
smart test requires to build the image using rpm packages, this check was
included, but it checked for PACKAGE_CLASSES=='package_rpm', and this is
not true when building packages for rpm and deb/ipk. So this would check
IMAGE_PKGTYPE instead.
[YOCTO #10964]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
oeRuntimeTest class is not used anymore as part of runtime
migration, this particular case was missed, so fix it.
[YOCTO #10964]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This adds default values to OERuntimeTestContextExecutor class in
order to make easier the execution of exported test that were
generated with testexport class.
[YOCTO #10686]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
This allows to use the package install feature with
the new OEQA framework.
[YOCTO #10234]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
This migrates the smart test from the old framework to
the new one. This has its own commit because smart
test was using bb and oe libraries that are available
when exporting the test cases to run in a different host.
Because of the removal of bb and oe libraries index and
packages feeds creation will be managed in testimage bbclass.
[YOCTO #10234]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
This migrates current runtime test suite to be used with the new framework.
[YOCTO #10234]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
Current targets (ssh and qemu) require a logger in their
constructors, so in order to get a new target we need
to provide the logger.
[YOCTO #10686]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
|
|
This commit will prepare context to use qemu and not just
simpleremote.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
To avoid getVar calls inside a utils module, also moves
get_host_dumper import inside testexport isn't needed.
[YOCTO #10231]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|
|
and server ip.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
|