| Age | Commit message (Collapse) | Author |
|---|
|
Bug 6705.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The SystemdServiceTests assume that avahi-daemon is installed,
which is not necessarily the case depending on the image being
tested.
Better check this dependency before starting the tests and skip
them if the service is not installed. This has to be done for
each test instead of for the entire module, because other
tests in the module can run without avavi.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The test tries to query the rpm list with a non-root user
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
common errors.
And some minor tweaks like moving some errors from qemu to common.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The test_systemd_journal() test will fail if journalctl exits with a
non-zero exit status. The exit status is non-zero even if there are no
journal files, which is what drove the creation of this test.
[Yocto #7388]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These occur when running images under virtualisation on machines with
high load which sometimes trigger timeouts in the kernel DMA code.
They're harmless to ignore in these cases.
Adding this since "failing" the build due to this is more annoying
thank useful.
[YOCTO #7387]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The 3.19 kernel introduces this error, ignore it for now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ptest-runner exit code check
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Use argparse instead of optparse for standardised help output, options
and a much cleaner code structure
* Look up pkgdata directory automatically so the user doesn't have to
specify it
* Use standard logging
NOTE: this does mean a slight change in syntax - if you do want to
specify the pkgdata directory (usually only necessary if you're calling
it from within the build process) you need to use the parameter -p (or
--pkgdata-dir) and specify this before the command, not after it.
Examples:
oe-pkgdata-util find-path /sbin/mke2fs
oe-pkgdata-util lookup-recipe libelf1
oe-pkgdata-util read-value PKGSIZE libc6
oe-pkgdata-util -p /home/user/oe/build/tmp/sysroots/qemux86-64/pkgdata read-value PKGSIZE libc6
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
any log files
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
on qemuppc
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
filters for edgerouter, minnow and jasperforest.
Signed-off-by: Lucian Musat <george.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We fixed these in parselog but not here. This test really can just be
deleted now really.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These are harmless from the USB pointer device we install, ignore them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For images without ptest the packages are automatically installed alongside ptest-runner. Log results are saved in ./results folder.
No cleanup is done for packages after the test is finished.
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Now we have the parselogs test, this one can be removed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the whitelist is imcomplete, inaccurate and suffers duplication.
These changes:
* Add common groups of errors
* Change to make the default whitelist clear
* Correctly (or at least better) escape the regexp expressions
* Add in missing machines to allow builds on the autobuilder to suceed
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
for certain error keywords.
This adds a common new qa test for general processing of log files. One
significant improvement is machine dependent ignore filters.
This can be used to replace several weaker individual QA tests
that are currently used.
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This tests out the limits header which we've noticed does have problems in
some SDK builds.
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
added LogResults decorator for oeTest class in oetest.py
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The modules that use skipModule should import it themselves and not rely on somebody else to import it.
Signed-off-by: Lucian Musat <georgex.l.musat@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The return statuses of commands like `su --help' or `passwd --help'
in shadow 4.2.1 version are different from those in shadow 4.1.4.3
version.
Now that we've upgraded shadow to 4.2.1, we need to fix these statuses
in the pam.py to make things work as expected.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The purpose of this module is to deploy a test image on a EFI-enabled hardware
and run our runtime tests. A bit of background:
- testimage.bbclass uses the concept of TEST_TARGET which is a class name
that is responsible for target deploying. A layer can provide
it's own TEST_TARGET. Right now has OE-core has a QemuTarget and a SimpleRemoteTarget
(ssh into an already up and running machine and run tests), the default one being qemu.
- basically testimage does something like:
target.deploy()
try:
target.start()
runTests()
finally:
target.stop()
This module assumes a running EFI machine with gummiboot as bootloader and
core-image-testmaster installed (or similar). Also your hardware under test has
to be in a DHCP-enabled network that gives it the same IP for each reboot.
One time setup (master image):
- build core-image-testmaster with EFI_PROVIDER = "gummiboot"
- install the image on the target
Test image setup:
- build your test image, e.g core-image-sato as you usually do, but with these in local.conf:
IMAGE_FSTYPES += "tar.gz"
- Now run the tests:
INHERIT += "testimage"
TEST_TARGET = "GummibootTarget"
TEST_TARGET_IP = "192.168.2.3"
bitbake core-image-sato -c testimage
Other notes:
- TEST_POWERCONTROL_CMD (togheter with TEST_POWERCONTROL_EXTRA_ARGS) can be a command that runs on the host and does power cycling.
The test code passes one argument to that command: off, on or cycle (off then on). In my case I use something like
TEST_POWERCONTROL_CMD="powercontrol.exp test 10.11.12.1 nuc1" in local.conf.
Basically my expect script does: 'ssh test@10.11.12.1 "pyctl nuc1 <arg>" and runs a python script there that controls power for a label called nuc1'.
The reason why my expect script has to ssh into another machine is because of network topology, and that machine is the one actually connected
to the test rack and the power strip. That's why TEST_POWERCONTROL_CMD and _ARGS need to be customized for one's setup, the only requirement being
that it accepts: on/off/cycle as the last argument.
- if no command is defined it would use classic reboot. This is fine as long as the machine
actually reboots (as in the ssh test hasn't failed), but it's useful for "simple-setup-with-one-board-on-the-desk" scenario, where
some manual interaction is okay from time to time.
[YOCTO #5614]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We see these from qemu images on servers under load. They're not interesting
and clutter the build output so lets ignore them.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
TEST_SUITES = "auto" would run smart tests even for non-rpm images,
which is pointless.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A previous commit broke downloads
when proxies are involved, let's fix it.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The settle() function had a race where services could still be activating at two
minutes but then when the final log is output, they've activated.
Remove this race and generally clean up the code.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
busybox 1.22 now returns exitcode 0 instead of 1 for
--help options, so this test needs to be updated when
busybox gets upgraded to 1.22.
https://bugs.busybox.net/show_bug.cgi?id=5612
http://git.busybox.net/busybox/commit/?id=efd0698f74caab0a0c8a51228b923ee142e8e278
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Without this it won't add core2-64 and similar channels, as the
directory name in deploy_dir/rpm uses _ not - as the package arch.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Restart is a property of a specific target, not
of a test class, should a test really need to restart
the target the direct method should be called.
Also some tests used this to enforce more ram, which
makes sense only for qemu targets only (and the inital
reason this was needed isn't valid anymore, qemu machines had
the default ram size bumped a while ago).
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Translate TUNE_PKGARCH to find the right file (this
used to work because tune for qemux86-64 used to be
x86_64 now it's core2-64)
Also, while using packagedata was nice, it's harder to make
the test exportable and runnable outside of the
build system. (where oe.packagedata isn't available)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When checking that no services have failed to start, actually wait for services
to finish starting by waiting for there not be no units in the "activating"
state.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Run a python script on the target
1)checks the output.
2)Call os.system method create a testfile
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
They are basically the same tests but:
- they look cleaner, using one single method / assert
- output from unittest will be cleaner (and includes a verbose status when needed)
- they are better grouped and use a real, active, enabled service
(machineid will be dropped and hostnamed was a static service)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If the hostnamed service can't be started or stopped, show the output from
systemctl status to assist debugging.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If some services have failed to start, get the status of them and some of their
log to help debug the problem.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If connman isn't running and we're running under systemd, use systemctl to get
the state according to systemd and the end of the connman log.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch makes the necessary changes for using the targetcontrol.py module
so that one can run the same tests on a qemu instance or a remote machine
based on the value of TEST_TARGET variable: "qemu" or "simpleremote".
The default value is "qemu" which starts a qemu instance and it's the
with what we currently have.
With "simpleremote", the remote machine must be up with network and ssh
and you need to set TEST_TARGET_IP with the IP address of the remote machine
(it can still be a qemu instance that was manually started).
Basically testimage.bbclass now does something along the lines of:
- load tests -> deploy (prepare) / start target -> run tests.
There were a couple of changes necessary for tests and
also some cleanups/renames that were needed to adjust this change. (use
ip everywhere when refering to target and server_ip when refering to host/build machine)
Also two unnecessary and unsed methods were dropped from sshcontrol.
[ YOCTO #5554 ]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The connman unique test starts another instance of connmand and then does a ps to
verify that there's only one of these running, on the assumption that the new
one has quit because there's already one running (started by init).
However, connmand is forking into the background straight away so there's a race
between running ps and the second connmand discovering the first and exiting.
This race can be seen because the test displays the output of ps, and by the
time that second ps has been executed the new connmand has exited.
This is a classic race condition and on a heavily loaded autobuilder inserting
an arbitrary sleep isn't wise. In the scheme of things this test isn't very
useful, so delete it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Builds a simple Hello World module on target.
Added to the defaults for core-image-sato-sdk.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of considering that ping test passed after 1 reply,
wait for at least 5 consecutive replies in 60 seconds (which should
be enough time for connman to reconfigure the interface in systemd
images and help with the fake ssh/tests fails.)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- move everything in the same test. setUp/tearDown aren't quite
the right thing here, everything it's part of the same test. (and
it get's confusing when ssh fails)
ldd:
- change test name and add output to error message
vnc:
- remove unnecessary check as there is no point in doing
both ps and netstat. Also improve error output a bit.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Lucian Musat
Patrick Ohly
Randy Witt
Richard Purdie
Paul Eggleton
Lucian Musat
Corneliu Stoicescu
Chen Qi
Stefan Stanacar
Ross Burton
Ting Wang