| Age | Commit message (Collapse) | Author |
|---|
|
Allow tests to access the listening port as just introduced.
Note that when using qemu this infrastructure shouldn't be
needed, but we still need to set the port to 0 so that
a listening port is determined automatically (e.g. by the
python http server).
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're seeing huge delays on the autobuilder during oe-selftest builddir
deletion. For example there is a currently running selftest we could do
with the results from and its been going 13 hours, at least 8 of which
was in deletion of the builddirs.
There are a variety of ways we could solve this problem however the
autobuilder has a mechanism for deferred deletion, "clobberdir" which
it already uses for this kind of work.
Whilst in general hardcoding things like this is horrible, I believe
in this case the benefits (and resulting improvements on my sanity
if nothing else) mean this is a case where we should do it.
If/as/when someone can come up with a better solution that is fine
and this can be replaced.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some test should not be run in QEMU systems so
add some checks to make that easier
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
skipIfFeature will skip a test if a given DIST_FEATURE
or IMAGE_FEATURE is enabled.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Do not decode the log content into a string only to re-encode it as
binary data again. Some logs might un-intentionally contain bytes that
do not decode as utf-8, as such preserve the log file content as it was
on disk.
Handle the decoding on the resulttool side, but also handle the failure
to decode the data.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Handle the streaming of exception content with details data. The
testtools package allows both 'err' and 'details' kwargs but can only
pass one of them to the parent.
To handle the passing of exception traceback and details data at the
same time, encode the traceback into the details object and remove the
'err' arg from the add* result call. This encodes the traceback similar
to how 'err' is handled without any details object. Decoding is already
done by testtools when the traceback is encoded in the details object.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Autobuilder type infrastructure can benefit from deletion of certain files as
background IO due to the way Linux filesystem priority works.
We have problems where build directories as part of oe-selftest being
delete starves the running tasks of IO to the point builds take much
longer to compelte.
Having this option of running the deletion at "idle" helps a lot with
that. Use the new option added to bb.utils.prunedir().
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the OEPTestResultTestCase class as a mix-in class to provide helper
functions for interacting with ptestresults within the extraresults
object generated by the test case.
This class also provides default compression of log text and log files.
Also add support to resulttool for decoding/decompressing log files
embedded in the test results.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the __oeqa_testtags attribute added by OETestTag and display no, one
or more tags separated by a comma. Also change the formatting of the
output so that the list of tests is formatted as "<test> (<tags>)" and
remove the table header for "id" (it is no longer available).
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Rework OETestTag so that it does not rely on the existing decorator code
base and instead inserts the tags into an attribute on the decorated
target (e.g. class/type or method). This allows the use of OETestTag on
classes and method.
In order to filter tagged tests rework the loaders filtering code,
removing the generic-ness (with validation and attributes/etc.) and
replace it with a "tags_filter" parameter which is a function that
filters a test based on the tags it has. This allows the loader user to
filter on tags in more specific ways (e.g. include all untagged tests
and any tests tagged with foo). Plumb all this through the context code
and testing code.
Update the associated tests to pass correctly with the changes.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Implement handling of extra result (e.g. ptestresult) collection with
the addition of a "extraresults" extraction function in OETestResult. In
order to be able to serialize and deserialize the extraresults data,
allow OETestResult add* calls to take a details kwarg. The subunit
module can handle cross-process transfer of binary data for the details
kwarg. With a TestResult proxy class to sit inbetween to encode and
decode to and from json.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These two tests relied on the context containing the results information.
This was moved into the OETestResults class.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
At some point the modules in tests/cases/loader/invalid/ were removed,
this test relied on having tests/cases/loader/invalid/oetag.py to
trigger a ImportError in the loader module. Skip this test.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For now, even if we have specified to skip the whole module/class via
command line, e.g., `oe-selftest -R gotoolchain', the class setup method
is still run. This at least results in unnecessary builds, and at worst
results in ERROR, if the setup method fails.
So improve the skipping mechanism to avoid class setup method to run
when specified to skip.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently `oe-selftest -R a' will skip 'archiver' tests. This is
not expected. Fix it so that the '-R' should be followed by actual
module/class/test names.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current codes to skip test cases are logically correct, but they
do not work correctly in reality. It does skip the tests as the command
line argument specifies, but the related information is wrong.
e.g.
$ oe-selftest -R archiver bblayers runtime_test
2019-06-17 09:24:53,764 - oe-selftest - WARNING - meta-selftest layer not found in BBLAYERS, adding it
2019-06-17 09:25:06,309 - oe-selftest - INFO - Adding layer libraries:
2019-06-17 09:25:06,310 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta/lib
2019-06-17 09:25:06,310 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-yocto-bsp/lib
2019-06-17 09:25:06,310 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-selftest/lib
2019-06-17 09:25:06,312 - oe-selftest - INFO - Running bitbake -e to test the configuration is valid/parsable
2019-06-17 09:25:10,521 - oe-selftest - INFO - Adding: "include selftest.inc" in /buildarea5/chenqi/SWAT/poky/build-selftest/conf/local.conf
2019-06-17 09:25:10,521 - oe-selftest - INFO - Adding: "include bblayers.inc" in bblayers.conf
2019-06-17 09:25:10,522 - oe-selftest - INFO - test_archiver_allows_to_filter_on_recipe_name (archiver.Archiver)
2019-06-17 09:25:10,522 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "runtime_test"'
2019-06-17 09:25:10,522 - oe-selftest - INFO - Skip by the command line argument "runtime_test"
2019-06-17 09:25:10,523 - oe-selftest - INFO - test_archiver_filters_by_type (archiver.Archiver)
2019-06-17 09:25:10,523 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "runtime_test"'
2019-06-17 09:25:10,523 - oe-selftest - INFO - Skip by the command line argument "runtime_test"
The archiver.Archiver.xxx tests should be skipped by 'archiver' command line
argument, not 'runtime_test'.
Change to use a function generator to achieve the desired effect. After the change,
the effect is as follows.
$ oe-selftest -R archiver bblayers runtime_test
2019-06-17 09:19:06,223 - oe-selftest - WARNING - meta-selftest layer not found in BBLAYERS, adding it
2019-06-17 09:19:19,598 - oe-selftest - INFO - Adding layer libraries:
2019-06-17 09:19:19,599 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta/lib
2019-06-17 09:19:19,599 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-yocto-bsp/lib
2019-06-17 09:19:19,599 - oe-selftest - INFO - /buildarea5/chenqi/SWAT/poky/meta-selftest/lib
2019-06-17 09:19:19,602 - oe-selftest - INFO - Running bitbake -e to test the configuration is valid/parsable
2019-06-17 09:19:24,368 - oe-selftest - INFO - Adding: "include selftest.inc" in /buildarea5/chenqi/SWAT/poky/build-selftest/conf/local.conf
2019-06-17 09:19:24,368 - oe-selftest - INFO - Adding: "include bblayers.inc" in bblayers.conf
2019-06-17 09:19:24,369 - oe-selftest - INFO - test_archiver_allows_to_filter_on_recipe_name (archiver.Archiver)
2019-06-17 09:19:24,369 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"'
2019-06-17 09:19:24,369 - oe-selftest - INFO - Skip by the command line argument "archiver"
2019-06-17 09:19:24,369 - oe-selftest - INFO - test_archiver_filters_by_type (archiver.Archiver)
2019-06-17 09:19:24,370 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"'
2019-06-17 09:19:24,370 - oe-selftest - INFO - Skip by the command line argument "archiver"
2019-06-17 09:19:24,370 - oe-selftest - INFO - test_archiver_filters_by_type_and_name (archiver.Archiver)
2019-06-17 09:19:24,370 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"'
2019-06-17 09:19:24,371 - oe-selftest - INFO - Skip by the command line argument "archiver"
2019-06-17 09:19:24,371 - oe-selftest - INFO - test_archiver_srpm_mode (archiver.Archiver)
2019-06-17 09:19:24,371 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "archiver"'
2019-06-17 09:19:24,372 - oe-selftest - INFO - Skip by the command line argument "archiver"
2019-06-17 09:19:24,372 - oe-selftest - INFO - test_bitbakelayers_add_remove (bblayers.BitbakeLayers)
2019-06-17 09:19:24,373 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "bblayers"'
2019-06-17 09:19:24,373 - oe-selftest - INFO - Skip by the command line argument "bblayers"
2019-06-17 09:19:24,373 - oe-selftest - INFO - test_bitbakelayers_createlayer (bblayers.BitbakeLayers)
2019-06-17 09:19:24,373 - oe-selftest - INFO - ... skipped 'Skip by the command line argument "bblayers"'
2019-06-17 09:19:24,374 - oe-selftest - INFO - Skip by the command line argument "bblayers"
[snip]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We continued to see encoding problems with ssh commands run in oeqa. After much
research the conclusion was we should use ignore the errors since some occasional bad
locale encoding is better than the unicode decoding issues we were seeing which crashed
large parts of tests.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently setupClass errors were not being mapped back to the failing tests
and they were hence being marked as UNKNOWN and the test statistics were
inaccurate.
This is because whilst the errors were being encoded into the test results
stream, the decoder doesn't cope with an error outside a testStart event.
We patch in an addError handler to the outsideTest parser so that this
does get handled in a way similar to the non-concurrent case.
It would be nice if we didn't have to do this but there doesn't seem
to be any other way to fix this other than forking subunit.
We also make a minor change so another of our changes can cope with
tests without a start time.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The string format for subunit setupClass/setupModule failures is slightly
different, tweak the regex to correctly handle both cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of showing:
RESULTS - ptest.PtestRunnerTest.test_ptestrunner - Testcase 1600: UNKNOWN (32.30s)
map unexpectedSuccesses to PASSED and improve the way they're displayed. We
expect/allow ptest runner to fail but if it passes we should handle it correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds SPDX license headers in place of the wide assortment of things
currently in our script headers. We default to GPL-2.0-only except for the
oeqa code where it was clearly submitted and marked as MIT on the most part
or some scripts which had the "or later" GPL versioning.
The patch also drops other obsolete bits of file headers where they were
encoountered such as editor modelines, obsolete maintainer information or
the phrase "All rights reserved" which is now obsolete and not required in
copyright headers (in this case its actually confusing for licensing as all
rights were not reserved).
More work is needed for OE-Core but this takes care of the bulk of the scripts
and meta/lib directories.
The top level LICENSE files are tweaked to match the new structure and the
SPDX naming.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These IDs refer to testopia which we're no longer using. We would now use the test
names to definitively reference tests and the IDs can be dropped, along with their
supporting code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This code really needs to be rewritten to not split potential
multibyte characters, for now work around it to avoid exceptions like:
File "/home/pokybuild/yocto-worker/qa-extras2/build/meta/lib/oeqa/core/target/ssh.py", line 211, in run
data = reader.read(1024, 4096)
File "/usr/lib64/python3.6/codecs.py", line 503, in read
newchars, decodedbytes = self.decode(data, self.errors)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x92 in position 0: invalid start byte
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some CI pipelines might perform further processing of the test output
(for instance, to plot some metrics into a chart). However, Since `thud`
we switched away from the XML-based jUnit reporting, and at the same
time we lost the ability of collecting the stdout and stderr of the
various tests.
We now restore this functionality by adding `stdout` and `stderr` keys
to the JSON reports. This behavior is off by default; in order to enable
it, one must set the `TESTREPORT_FULLLOGS` variable in the bitbake
configuration.
Signed-off-by: Alberto Mardegan <amardegan@luxoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is particularly useful when setting up GL tests.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous code assumed builddir and meta-selftest are in the same dir, but
this isn't always true, builddir can be anywhere, use get_test_layer() to
locate meta-selftest can fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable qemu for slirp. Initialize Qemurunner with slirp. Setup ip
and port attribute to enable connection with qemu running with slirp.
[YOCTO#10713]
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Qemu do not use the ip input from external. It will
retrieve ip from QemuRunner instance and assign
ip value.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid an unclosed file per thread warning when running selftests concurrently
by closing the result stream.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid the warning "DeprecationWarning: invalid escape sequence \(" by marking
the regexs correctly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Clean up the warning:
meta/lib/oeqa/core/loader.py:27: DeprecationWarning: inspect.getargspec() is deprecated, use inspect.signature() or inspect.getfullargspec()
_failed_test_args = inspect.getargspec(unittest.loader._make_failed_test).args
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want to see failures/errors listed last since this is the most easily
visible part of the log on consoles or autobuilder output and makes
human processing easier rather than having to scroll up and scan for
a single failure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its useful to have the counts of success/failure/error/skipped at the end of the
results to allow for easier human reading of what happened.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows the ptest results from ptest-runner, run in an image to be
transferred over to the resulting json results output.
Each test is given a pass/skip/fail so individual results can be monitored
and the raw log output from the ptest-runner is also dumped into the
results json file as this means after the fact debugging becomes much easier.
Currently the log output is not split up per test but that would make a good
future enhancement.
I attempted to implement this as python subTests however it failed as the
output was too confusing, subTests don't support any kind of log
output handling, subTest successes aren't logged and it was making things
far more complex than they needed to be.
We mark ptest-runner as "EXPECTEDFAILURE" since its unlikely every ptest
will pass currently and we don't want that to fail the whole image test run.
Its assumed there would be later analysis of the json output to determine
regressions. We do have to change the test runner code so that
'unexpectedsuccess' is not a failure.
Also, the test names are manipuated to remove spaces and brackets with
"_" used as a replacement and any duplicate occurrences truncated.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is no point in adding empty log entries to the json result files, only
add them if there is log data.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As part of the solution to replace Testopia to store testresult,
OEQA need to output testresult into single json file, where json
testresult file will be stored in git repository by the future
test-case-management tools.
The json testresult file will store more than one set of results,
where each set of results was uniquely identified by the result_id.
The result_id would be like "runtime-qemux86-core-image-sato", where
it was a runtime test with target machine equal to qemux86 and running
on core-image-sato image. The json testresult file will only store
the latest test content for a given result_id. The json testresult
file contains the configuration (eg. COMMIT, BRANCH, MACHINE, IMAGE),
result (eg. PASSED, FAILED, ERROR), test log, and result_id.
Based on the destination json testresult file directory provided,
it could have multiple instances of bitbake trying to write json
testresult to a single testresult file, using locking a lockfile
alongside the results file directory to prevent races.
Also the library class inside this patch will be reused by the future
test-case-management tools to write json testresult for manual test
case executed.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Refactor the original _getDetailsNotPassed method to return
testresult details (test status and log), which will be reused
by future OEQA code to write json testresult.
Take the opportunity to consolidate and simplify the logic used
to gather test status and log within the TestResult instance.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
skipIfInDataVar will skip a test if a value is in a certain variable.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its a pain to have to wait until oe-selftest finishes to see the
failures for example.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Periodically we'd see:
NOTE: core-image-sato-1.0-r0 do_testsdk: ======================================================================
NOTE: core-image-sato-1.0-r0 do_testsdk: ERROR: broken-runner
NOTE: core-image-sato-1.0-r0 do_testsdk: ----------------------------------------------------------------------
NOTE: core-image-sato-1.0-r0 do_testsdk: testtools.testresult.real._StringException: Traceback (most recent call last):
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/meta/lib/oeqa/core/utils/concurrencytest.py", line 122, in _run_test
test.run(process_result)
File "/usr/lib/python3.6/site-packages/subunit/__init__.py", line 1194, in run
protocol = TestProtocolServer(result, self._passthrough, self._forward)
File "/usr/lib/python3.6/site-packages/subunit/__init__.py", line 514, in __init__
stream = stream.buffer
AttributeError: '_io.StringIO' object has no attribute 'buffer'
which seems to occur if a result arrives before all the runner threads
have started. The runner's result handling changes sys.stdout to a buffer
temporarily which can be seen in other threads and it can sometimes fail.
Since the tests are running in a separate process we don't need this buffer
handling in the concurrent case so only set when not parallelising. The
concurrent class handle setting buffer mode internally.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this, error output such as that in the teardown can be lost
and processes may recieve signals they're not expecting causing other
strange errors.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
oe-selftest -r <invalid test name>
currently triggers a traceback. Ensure this doesn't happen and the user gets a
sensible error message.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Checking if the dependency had any failure is unreliable, for example
if the underlying data doesn't get transferred and the list is empty,
success of the dependency is assumed.
Since we now have success data available, change the code to use it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This isn't present on modern distros by default and doesn't work with
testtools, needing multiple code paths in the code. Remove it in favour
of finding a better replacement for results collection/analysis.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There doesn't appear to be any reason we need this _results indirection
any more so remove it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have several options for parallel processing in oeqa, parallel
execution of modules, threading and mulitple processes for the runners.
After much experimentation is appears the most scalable and least
invasive approach is multiple processes using concurrenttestsuite
from testtools. This means we can drop the current threading code
which is only used by the sdk test execution.
oeqa/decorator/depends: Remove threading code
Revert "oeqa/sdk: Enable usage of OEQA thread mode"
This reverts commit adc434c0636b7dea2ef70c8d2c8e61cdb5c703b1.
Revert "oeqa/core/tests: Add tests of OEQA Threaded mode"
This reverts commit a4eef558c9933eb32413b61ff80a11b999951b40.
Revert "oeqa/core/decorator/oetimeout: Add support for OEQA threaded mode"
This reverts commit d3d4ba902dee8b19fa1054330cffdf73f9b81fe7.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows oe-selftest to take a -j option which specifies how much test
parallelisation to use. Currently this is "module" based with each module
being split and run in a separate build directory. Further splitting could
be done but this seems a good compromise between test setup and parallelism.
You need python-testtools and python-subunit installed to use this but only
when the -j option is specified.
See notes posted to the openedmbedded-architecture list for more details
about the design choices here.
Some of this functionality may make more sense in the oeqa core ultimately.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
André Draszik
Richard Purdie
Armin Kuster
Nathan Rossi
Chen Qi
Mardegan, Alberto
Alexander Kanavin
Robert Yang
Yeoh Ee Peng
Richard Leitner