| Age | Commit message (Collapse) | Author |
|---|
|
This allows an image to skip the creation of kernel depmod
data. It is useful for creating an image that will run as a
container image inside a host with no knowledge of the parent's
kernel.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since the rewrite of the image construction code in python a few
releases ago, we remove a couple of packages from the image as one of
the final steps when constructing the image (notably update-rc.d and
run-postinsts). However, because of the order of operations, these
packages are still listed both in the buildhistory
installed_package*.txt files and in the manifest file created next to
the image, which is wrong.
There were two possible solutions to this: (1) change the order such
that the uninstallation occurs before calling ROOTFS_POSTPROCESS_COMMAND
or (2) add another hook variable in such that we can have the
package list collection code run at the right time. Because it's
currently possible (but very much not recommended) to install additional
packages within ROOTFS_POSTPROCESS_COMMAND, which may have postinstall
scripts and thus require the packages we would otherwise uninstall if we
were to take option 1, option 2 is really the least likely to cause
problems. Therefore, add ROOTFS_POSTUNINSTALL_COMMAND and make the image
and buildhistory classes use it.
Fixes [YOCTO #6479].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Rename it to _uninstall_unneeded.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
Using populate_sysroot for this data was a nice idea but flawed as it
doesn't work in multilib builds. Instead we can use PKGDATA_DIR since
this is consistent over multilib builds. It also turns out to be
slightly neater code too. Hopefully this resolves the problem once and
for all.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the rpm package backend enabled, running:
bitbake <image>
bitbake virtual/kernel -c clean
bitbake <image> -c rootfs -f
results in an image with incorrect kernel module dependency information.
The problem is that the System.map and kernel-abiversion files are needed
for depmod and after the recent kernel changes, these are no longer in
sstate.
Its reasonable to require the kernel to unpack/build if you're
about to build a module against it. It is not reasonable to require this
just to build a rootfs.
Therefore stash the needed files specifically for depmod.
Also fix some STAGING_KERNEL_DIR references which were incorrect, found
whilst sorting through his change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the changes to kernel layout, we need to refer to the correct
location of the kernel abiversion file.
Thanks to Saul, Randy, Darren and Bruce to figuring out the issue.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The fix filters out irrelevant messages, and makes the catching more
accurate, the inner warn message in do_rootfs usually comes from the
output of complementary install, and pattern the format to catch it.
Here is the example of irrelevant messages:
...
|WARNING: log_check: There is a warn message in the logfile
|WARNING: log_check: Matched keyword: [warn]
|WARNING: log_check: `tmp/deploy/rpm/core2_64/pam-plugin-warn
-1.1.6-r5.0.core2_64.rpm' -> `tmp/work/intel_x86_64-wrs-linux/
wrlinux-image-installer/1.0-r0/rootfs/Packages.intel/./core2_64/
pam-plugin-warn-1.1.6-r5.0.core2_64.rpm'
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Package managements (smart/apt-get/opkg-cl) generate some warn messages
to stdout, and we need to catch them and output by bb.warn.
Here is an example, while invoking smart to attempt install doc packages,
if install failed, it generates warn message to stdout.
...
|warning: Can't install util-linux-doc-2.24.2-r1@i586: Can't
install util-linux-doc-2.24.2-r1@i586: no package provides info
...
The fix catches it and outputs:
...
|WARNING: log_check: There is a warn message in the logfile
|WARNING: log_check: Matched keyword: [warn]
|WARNING: log_check: warning: Can't install util-linux-doc-2.24.2-r1@
i586: Can't install util-linux-doc-2.24.2-r1@i586: no package provides
info
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
Use RPM_PREFER_ELF_ARCH to instead of RPM_PREFER_COLOR as rpm upstream
suggested, and use "4" to instead of "3" since it is a bit mask (not
enumeration), so we need "4" here.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using the RPM packaging backend to generate a rootfs there needs to
be a way to configure the preferred ABI to resolve ELF file conflicts.
Currently RPM resolves ELF file conflicts with the last-installed wins.
Using SMART it's difficult to know what the last installed will be.
There are three specific policies that can be selected:
1: ELF32 wins
2: ELF64 wins
3: ELF64 N32 wins (mips64 or mips64el only)
Another option "0" is uncontrollable, which means that if two are being
installed at once Elf64 is preferred, but if they're being installed in
two different transactions, last in wins, so we don't document it.
Add RPM_PREFER_COLOR to let the user config the preferred ABI.
[YOCTO #4073]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
[YOCTO #6493]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added base variables and package backend specific variables to
rootfs[vardeps] in order for rootfs to rebuild when changes are made.
Set some variables as [func] to inform bitbake that they are shell
scripts, so that it invokes its shell dependency parsing. Without
marking them as functions, changes in the actual function body would
not trigger rootfs rebuilds.
[YOCTO #6502]
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The /install/tmp diectory is created during installation by
the smart package manager, we need to clean it up here
[YOCTO #6497]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, if we have 'package-management' and 'read-only-rootfs'
both in IMAGE_FEATRUES, we would meet the following error at system
start-up.
rm: can't remove '/etc/rcS.d/S99run-postinsts': Read-only file system
However, what's really expected is that when there's no postinstall
script at system start-up, the /etc/rcS.d/S99run-postinsts should not
even be there.
Whether or not to remove the init script symlinks to run-postinsts should
not depend on whether we have 'package-management' in IMAGE_FEATURES; rather,
it should only depend on whether we have any postinstall script left to run
at system start-up.
This patch changes the _uninstall_unneeded function based on the logic
stated above.
[YOCTO #6257]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
BitBake has the exact same code as oe.utils.contains so there's no
reason to duplicate it. We now rely on the bb.utils.contains code for
metadata.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since commit a83144bac8d67704ff66f5dc0fc56f5b63979694 (2014-02-11), USE_DEVFS is not considered anymore.
For compatibility, let's restore USE_DEVFS semantic.
Also add USE_DEVFS to documentation.conf.
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This commit adds a new _cleanup() internal method that will be called at
the end of rootfs creation, so that each backend can delete various
files that were probably generated during rootfs postprocess execution,
etc.
[YOCTO #6049]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
packages list
Since we created a new PkgsList object that will deal with listing the
installed packages in a rootfs, use the new class both for images and
SDKs in the wrapper functions.
The old list_installed_packages() wrapper listed only the packages inside
an image rootfs. It didn't deal with target/host SDK rootfs's.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adding a common interface to add predefined package manager
channels to prebuilt rootfs:es.
Adding PACKAGE_FEED_URIS = "http://myre.po/repo/, will
assume repo directories named (rpm,ipk,deb) as subdirectories
and statically add them to the rootfs, using the same PKG_ARCHs
as the build which produced the images.
Tested with RPM, IPK and DEB.
deb feed functionality seem broken, is anyone using this ?
Signed-off-by: David Nyström <david.c.nystrom@gmail.com>
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
calling check_output()
If a command executed with subprocess.check_output() fails, the
subprocess.CalledProcessError.output contains only STDOUT and the user
needs to check the log.do_rootfs to see any other details.
This commit forwards stderr to stdout so that, in case of failure, the
entire error output will be displayed in terminal.
[YOCTO #5902]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We shouldn't be running this if it expands to None or "" or False
so update the code accordingly.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The _multilib_sanity_test installs multilib packages in a temporary
root fs, and compare with the current image to figure out duplicated
files that come from different packages.
While incremental image generation enabled and the previous image
was existed, there was an Multilib check error:
...
ERROR: Multilib check error: duplicate files tmp/work/qemux86_64-poky-
linux/core-image-minimal/1.0-r0/multilib/lib32/lib/libc.so.6 tmp/work/
qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/lib/libc.so.6
is not the same
...
The reason is the file in the existing image has been prelinked by
previous image generation and the file in a temporary root fs is not
prelinked, even though both of them came from the same package, the
Multilib check failed.
[YOCTO #1894]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
While incremental image generation enabled and the previous image is
existed, if BAD_RECOMMENDATIONS is changed, the operation on the
existing image is complicated, so remove the old image in this situation.
The same with PACKAGE_EXCLUDE and NO_RECOMMENDATIONS.
[YOCTO #1894]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
The incremental image generation is based on the previous existing
image, adds new packages, upgrades existing packages, and removes unused
packages.
[YOCTO #1894]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
We override LDCONFIGDEPEND to be empty string for uclibc
however the current check is for it being None as a result
the function is still executed but ldconfig-native is not
built as dependency for rootfs when building with uclibc
Fixes errors like below
File:
'/home/kraj/work/angstrom-repo/sources/openembedded-core/meta/lib/oe/rootfs.py',
lineno: 191, function: _run_ldconfig
0187: def _run_ldconfig(self):
0188: if self.d.getVar('LDCONFIGDEPEND', True) is not None:
0189: bb.note("Executing: ldconfig -r" +
self.image_rootfs + "-c new -v")
0190: self._exec_shell_cmd(['ldconfig', '-r',
self.image_rootfs, '-c',
*** 0191: 'new', '-v'])
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Because the package-index.bb needs to create package indexes outside
do_rootfs environment, move the indexing capability out of
PackageManager class to a smaller Indexer class.
This commit:
* simply moves the indexing functions for ipk/deb with no changes;
* rewrites the RPM indexing function so that it can be easily moved out
of the PackageManager class;
* removes some RPM duplicate code, moves it into a method inside
RpmPM class and changes the RpmPM constructor so that the new method
is effective;
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For some odd reason (at least I couldn't find an explanation to this,
yet), if a multilib version of a package is installed after the main one
(that is: in a different smart session), the main package binaries are
not overwritten.
This commit restores the functionality to the original one, before
migrating to python: feed all the packages to smart, apart from attempt
only ones which are installed separately.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This commit whitelists some common directories, so the multilib sanity
checks pass and also fixes an issue in lib/oe/rootfs.py when the
compared files do not exist.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Print the entire command output in case of errors.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
When using opkg as the PM backend, one has the option to provide custom
feeds to create the rootfs from.
This commit:
* fixes this in the refactored code;
* moves the custom config creation code to python;
* clean up the package-ipk.bbclass;
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
Status file path was not created correctly.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
The idea of postinstall intercept hooks is to run CPU intensive
postinstalls (like the ones generating font/pixbuf/icon caches) on host,
at rootfs generation time. So, ideally, the user would like to know if
the intercepts fail on host.
With this patch, the user will see warnings on console if intercept
hooks fail to execute.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
The tweak made the code looks better.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
- The variable D is needed by intercepts scripts;
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
It failed to read Kernel version from kernel-abiversion
file, the reason was it didn't strip the readline.
...
Error: Kernel version 3.10.25-yocto-standard
does not match kernel-abiversion (3.10.25-yocto-standard)
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
The refactor of shell function rootfs_uninstall_unneeded is incorrect,
it should check and update the installed_pkgs.txt file for the existance
of the packages that were removed.
...
rootfs_uninstall_unneeded () {
if ${@base_contains("IMAGE_FEATURES", "package-management", "false", "true", d)}; then
if [ -z "$(delayed_postinsts)" ]; then
# All packages were successfully configured.
# update-rc.d, base-passwd, run-postinsts are no further
# use, remove them now
remove_run_postinsts=false
if [ -e ${IMAGE_ROOTFS}${sysconfdir}/init.d/run-postinsts ]; then
remove_run_postinsts=true
fi
# Remove package only if it's installed
pkgs_to_remove="update-rc.d base-passwd ${ROOTFS_BOOTSTRAP_INSTALL}"
for pkg in $pkgs_to_remove; do
# regexp for pkg, to be used in grep and sed
pkg_regexp="^`echo $pkg | sed 's/\./\\\./'` "
if grep -q "$pkg_regexp" ${WORKDIR}/installed_pkgs.txt; then
rootfs_uninstall_packages $pkg
sed -i "/$pkg_regexp/d" ${WORKDIR}/installed_pkgs.txt
fi
done
...
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
Move the bb.utils.remove(self.image_rootfs, True) from the base class
constructor, to Opkg/Ipkg constructors after super's constructor is
called.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
- Implementation RpmRootfs class
- Refactor list_installed_packages in python
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
Since the Manifest class has this property, use it. This contains the
default package installation order.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
Remove the directory, manually, in the Rootfs.create() function.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
This library will be used to generate the rootfs.
Recommended usage:
create_rootfs(d, manifest_file)
this will determine the PM backend used, save the shell environment and
will call the appropriate backend implementation (DpkgRootfs(d,
manifest_file).create()).
NOTE: this commit adds Dpkg support.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
Dan McGregor
Paul Eggleton
Richard Purdie
Hongxu Jia
Robert Yang
Roxana Ciobanu
Saul Wold
Chen Qi
Otavio Salvador
Matthieu Crapet
Laurentiu Palcu
David Nyström
Khem Raj