| Age | Commit message (Collapse) | Author |
|---|
|
Extracting SDK archive may fail if the script is run using a path with
special characters such as space or asterisk. This is because the shell
interprets such characters after expanding the $0 variable.
Added quotes to all uses of the shell variable $0 to fix this.
Signed-off-by: Andrey Mozzhuhin <amozzhuhin@yandex.ru>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 0453acbbd45604537090ec7a3295b34309e6eecb)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
|
|
useless info "gcc: command not found" is printed when run
buildtools-extended on system without gcc.
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 289a58ddbbd8bb3f5ae0d3421cfe8e75b60b0fbe)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
|
|
centos7 doesn't have python3 intalled by default, so running
the script errors in novel ways if it is not installed.
Signed-off-by: Jeremy A. Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Trying to create a clean PATH breaks cases where we install a buildtools tarball
on hosts to provide newer versions of gcc. Rework the fix for #8698 to clean up
directories in PATH which don't exist isntead. Do it with python as the shell
version was too fraught with corner cases.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Installing on centos7, which the extended version of the
buildtools tarball is supposed to fix and with reproducable
builds turned on, all the time stamps are for epoch. This
results in the following output for every file:
tar: ./sysroots/x86_64-pokysdk-linux/usr/include/c++/9.2.0/cstdalign: implausibly old time stamp 1969-12-31 16:00:00
tar: ./sysroots/x86_64-pokysdk-linux/usr/lib/libstdc++.so.6: implausibly old time stamp 1969-12-31 16:00:00
Ignore the timestamps during the uncompession step.
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Current sdk type is tar.xz, but for mingw sdk, since we
have symlink under the sdk folder, 7zip which used to
extract tar.xz cannot handle it, refer 7zip upstream bug:
https://sourceforge.net/p/sevenzip/discussion/45797/thread/c71d6b96/
so add option for usr can select the sdk type.
Add override SDK_ARCHIVE_TYPE, default type is tar.xz, and also
support type zip. user want to use zip type can set SDK_ARCHIVE_TYPE
to zip.
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
unify the spacing for questions in various places e.g. before the [Y/n]
there should be a space, and before "?" there should be none. Unify the
questions where the system expect an answer from the end user.
Signed-off-by: Gianfranco Costamagna <costamagnagianfranco@yahoo.it>
Signed-off-by: Gianfranco Costamagna <locutusofborg@debian.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
ICECC_PATH wasn't being preserved in the environment when it was
reinitialized. This prevented toolchain installs from being able to use
icecream by setting ICECC_PATH when icecc isn't in $PATH
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Recipes can now install post-relocation scripts which will be run when
the SDK is installed.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
environment
For the PATH host tool whitelisting to work, the sbin directories need to be
in PATH. In the cleaned SDK environment on some distros, this isn't the case
and the SDK would then fail to setup there. This adds code to add such paths
if they do happen to be missing, ugly, but unblocks the PATH whitelisting
which I believe to be important.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If ext sdk is built by gcc version higher than host gcc version
and host gcc version is 4.8 or 4.9 the installation is known to
fail due to the way uninative sstate package is built.
It's a known issue and we don't have a way to fix it for above
mentioned combinations of build and host gcc versions.
Detected non-installable combinations of gcc versions and
print an installation error.
[YOCTO #10881]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When the host and the SDK architectures are incompatible the SDK
installer outputs an incomplete error message "Error: Installation
machine not supported!". This commit adds a more verbose error
message e.g "Error: Incompatible SDK installer! Your host is i686
and this SDK was built for x86_64 hosts."
Signed-off-by: Todor Minchev <todor.minchev@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Check a number of things as early as possible in the eSDK installer
script so that the user gets an error up front rather than waiting for
the build system to be extracted and then have the error produced:
* Check for missing utilities specified in SANITY_REQUIRED_UTILITIES
(along with gcc and g++), taking into account that some of these are
satisfied by buildtools which ships as part of the SDK. We use the
newly added capability to list an SDK's contents to allow us to see
exactly which binaries are inside the buildtools installer.
* Check that Python is available (since the buildtools installer's
relocate script is written in Python).
* Check that locale value set by the script is actually available
* Check that the install path is not on NFS
This does duplicate some of the checks in sanity.bbclass but it's
difficult to avoid that given that here they have to be written in shell
and there they are written in Python, as well as the fact that we only
need to run some of the checks here and not all (i.e. the ones that
relate to the host system or install path, and not those that check the
configuration or metadata). Given those issues and the fact that the
amount of code is fairly small I elected to just re-implement the checks
here.
Fixes [YOCTO #8657].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a -l command-line option for SDK installers to get a list of files
that will be extracted by the SDK - internally this just runs "tar tv"
on the embedded tarball. This can be used to look at which files the SDK
provides without actually installing it. The initial user of this is the
extensible SDK build process which needs to know what binaries are going
to be installed by the buildtools installer without installing it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In order to show the task progress during the extensible SDK
installation, knotty needs to know it is using a terminal it can
support the "interactive" mode on (i.e. ncurses can be used), which
means it needs access to the TERM variable value, so allow that
through into the cleaned environment within the SDK installation
script.
Part of the implementation for [YOCTO #9613].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Under python 3, if we spawn python processes, we need to have a UTF-8 locale,
else python's file access methods will use ascii. You can't change that mode
once the interpreter is started so we have to ensure a locale is set. Ideally
we'd use C.UTF-8 since OE already forces the C locale but not all distros support
that and we need to set something so en_US.UTF-8 seems as standard we we can get.
This matches the change in bitbake revision 8902c29638411d312e6fc4a197707e5742652e15
Also set this into the environment used when installing SDKs since
python can be run and we need to ensure we use a standardised locale
which is available from things like buildtools-tarball.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
all_proxy is referred to by oe-git-proxy so ensure it is allowed through
into the installer environment in case the extensible SDK install
process needs to query a remote git repository.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If SDK_EXT_TYPE is set to "minimal" then the SDK won't contain many
sstate artifacts, and you're required to set up an sstate mirror in this
case anyway so there's no point publishing the "stub" sstate-cache
directory from within the SDK since it won't be useful for update
purposes and may be confused with the real sstate-cache.
There is however a possibility that people might publish the real
sstate-cache directory under the same output directory provided to
oe-publish-sdk, thus deleting it after extracting (as we were doing with
other files we wanted to clean up at the end) would be problematic,
besides which extracting it and then deleting it is wasteful. Thus,
introduce a "-p" command line option to the SDK installer that we can
use to tell tar not to extract the items we don't want when publishing.
This has the added benefit of mostly keeping references to these in the
place they belong i.e. in populate_sdk_ext.bbclass.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Check the length for target_sdk_dir to ensure the relocation
behaviour in relocate_sdk.py is correct.
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Extensible SDK needs to do network operations so add proxies to
environment.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently if xz isn't installed when installing the SDK you get an error
from tar and then the SDK installation continues, cascading into a load
of other failures since files are missing. Add a check to see if xz can
be run and error out if it can't, and also exit if tar fails.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
xz gives *much* faster decompression times for the SDK which in itself
is a good reason to use it. It also gives better compression.
One downside is its slower but we care about the end user case
first, build performance secondary.
It also assumes the SDK user has a tar capable of understanding a xz
compressed file but that should be common enough now.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix a second regression in the extensible SDK installation caused by
OE-Core revision 6d2074d477596971dc52027dd87b02af7f39138d - the HOME
environment variable was being cleared, thus using ~/ in the install
path (which is in the default path for the extensible SDK) resulted in a
directory named '~' being created in the current directory.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In OE-Core revision 6d2074d477596971dc52027dd87b02af7f39138d we added a
line which re-executes the script with a cleaned environment using
env -i; unfortunately that caused a regression in the extensible SDK on
Ubuntu 14.04 - strangely, there it seems that the value you get for PATH
under env -i contains '.' which triggers a sanity check failure when
preparing the build system. Do a belt-and-braces fix - source
/etc/environment if it exists (so you get a more complete PATH value)
and then filter any nastiness out of PATH for good measure. (Ubuntu
15.04 doesn't seem to suffer from the same problem.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
buildtools-tarball uses a custom env setup script, which isn't named the
same as the default; thus unfortunately OE-Core revision
a36469c97c9cb335de1e95dea5141038f337df95 broke installation of
buildtools-tarball. Revert that and implement a more robust mechanism.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixes [YOCTO #8698] -- https://bugzilla.yoctoproject.org/show_bug.cgi?id=8698
If prior to running the toolchain installation script a toolchain
environment script is sourced then the toolchain installation will
fail. This because the environment is now set for the sourced toolchain
and doesn't suit the installation. In particular PATH points to the
toolchain executables.
The fix makes the script recursively call itself a second time with a
clean environment.
Tested by sourcing a previous successfully installed environment, erasing the
previous installation directory and then reinstalling in the same directory.
Signed-off-by: George Nita <george.nita@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you put an $ character in the path, SDK installation fails during the
preparation stage, so add this to the disallowed characters.
Fixes [YOCTO #8625].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Print a line that's the full length of the title that it's underneath.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The toolchain install script suggest the user to source env_setup_script
from wrong path now. eg:
" Each time you wish to use the SDK in a new shell session, you need to
source the environment setup script e.g.
$ . /opt/poky/2.0//opt/poky/2.0/environment-setup-armv5e-poky-linux-gnueabi
"
fix it.
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently a lib32-core-image-* SDK prints an incorrect environment-setup-*
file name when installing the SDK. Instead of printing the wrong thing, list
the environment setup files present in the SDK.
As it happens this fixes the message printed with buildtools-tarball too
which someone reported to me about the same time as I finished this patch!
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed when sh is bash:
$ sh ./tmp/deploy/sdk/poky-glibc-x86_64-core-image-minimal-core2-64-toolchain-1.8+snapshot.sh
Poky (Yocto Project Reference Distro) SDK installer version 1.8+snapshot
===========================================================
./tmp/deploy/sdk/poky-glibc-x86_64-core-image-minimal-core2-64-toolchain-1.8+snapshot.sh: 77: read: Illegal option -e
You are about to install the SDK to "/opt/poky/1.8+snapshot". Proceed[Y/n]? ../SDK2
Installation aborted!
There is ony one bashism "read -e" in toolchain-shar-extract.sh, but
'-e' is useless here, so remove it and use /bin/sh.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Tar has supported a --checkpoint option since version 1.15.91, so it
should be safe to use here to print dots showing that it's still doing
something (technically it's not really progress unless you know how many
dots it's going to print, which even it doesn't know at the start, but
it's better than nothing).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When publishing SDK, what we want is basically its metadata and sstate
cache objects. We don't want the SDK to be prepared with running bitbake
as it takes time which reproduces meaningless output for the published SDK.
So this patch adds an option to allow for SDK to be extracted without
preparing the build system.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Extensible SDK cannot be installed as root so by default offer to install it in
user's home directory under distro/distro_version replacing the normal SDK
version '+' char with a '_' as that's a restricted character for bitbake
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are some characters that cannot appear in the installation path, so we
need to check for these
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For a clear look when input.
[YOCTO #8089]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Since the extensible sdk uses bitbake, which can't run as root, the sdk
shouldn't be installed as root.
Previously it would error out late into setup when bitbake errored
saying not to run bitbake as root.
Now the script errors with a message saying the extensible sdk can't be
installed as root.
[Yocto #7545]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Tell the user how to set up the SDK environment each time they want to
use it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Show a friendly title when running the SDK installer, so the user knows
what SDK they are installing. The title is controlled by the
SDK_INSTALLER_TITLE variable and includes the distro name and SDK
version by default.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the buildsystem is copied into the sdk and its toolchain is to
be used, then the relocation provided in toolchain-shar-template.sh
isn't needed and will actually fail.
So break the relocation aspect out and essentially make it another
SDK_POST_INSTALL_COMMAND script.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Andrey Mozzhuhin
Changqing Li
Jeremy Puhlman
Richard Purdie
Gianfranco Costamagna
Joshua Watt
Ed Bartosh
Todor Minchev
Paul Eggleton
Wenlin Kang
Aníbal Limón
George Nita
Maxin B. John
Robert Yang
Qi.Chen@windriver.com
Brendan Le Foll
Randy Witt