| Age | Commit message (Collapse) | Author |
|---|
|
bluez-hcidump was a separate package in bluez4, but was integrated into
bluez5.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
This was missing leading to gcc-source-<foo> being built when using gcc-cross-<bar> with GCCVERSION=bar.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gcc-source is a convenience recipe to save duplicate copies of the GCC source
tree and should be whitelisted for GPLv3 avoidance along with the rest of GCC.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
As the code that uses BB_SIGNATURE_EXCLUDE_FLAGS uses d.getVarFlags() so doesn't
get to see the internal flags, remove _append and _prepend. Also defaultval is
now _defaultval and thus internal, so remove that too.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows us to merge in the _defaultval changes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some minor changes to the names and descriptions
used in the Toaster configuration file:
* Change the name of the local layer source from Local OE-Core
to Local OpenEmbedded
* Change the imported layer source name from User Imported Layers
to just Imported layers. It is shorter, which helps table display
* Change the description of the master release from OE-Core
master to OpenEmbedded master
* Change the description of the dizzy release from OE-Core dizzy
to OpenEmbedded Dizzy
* Change the helptext of the dizzy release to remove the
"latest" reference, which can make maintenance hard
* Change the name of the Local Yocto Project release to Local
OpenEmbedded
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recipe packaging for the target requires permissions that are consistent
with meta/files/fs-perms.txt which specifies certain user and group
names. In the early parts of a target build base-passwd is not yet
available to provide the target /etc files used for user/group lookup.
Allow pseudo to fall-back to the last-resort files it installs if the
target ones aren't there yet.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
|
|
In managed mode, Toaster creates project configurations
based on the layers that are being checked-out on disk.
The defaults are set through a JSON configuration
file that contains layer-specific specific information.
This patch adds toasterconf.json files for the oe core layer,
that make Toaster work with a standalone OpenEmbedded-Core checkout.
The toasterconf.json files describe basic configuration for Toaster
projects, including default layers, default configuration variable values,
toaster-compatible branches, and the layerindex URL
where the base layer and compatible layers.
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getopt can be provided by either util-linux or busybox. Allow the
distro to control which implementation is used, and default it to
util-linux.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Acked-by: Ken Sharp <ken.sharp@ni.com>
Acked-by: Ben Shelton <ben.shelton@ni.com
Acked-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Document some recently added tasks and variables.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is not entirely obvious that all reasonable configurations
will have multilib.conf strictly before the file which might
want to set MULTILIB_GLOBAL_VARIANTS. The x86-ish values here
look like reasonable default guesses, but shouldn't override
an explicit setting.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Updated as the rpm upstream suggested:
- RPM_PREFER_COLOR -> RPM_PREFER_ELF_ARCH
- 3 -> 4
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of replicating the logic for the host compiler naming from bitbake.conf,
use the BUILD_* variables directly.
Also change BUILD_CPP to use gcc -E (which native.bbclass previously used), as
some recipes (e.g. grub-efi) use ${CPP} with multiple input files, which gcc -E
can handle but cpp can't.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
reflected in licenses.conf.
The previous version could crash on dead links in the rootfs, or if the manifest directory did not
exist. The generated files were also not compliant with the SPDX specification, for example file
entries did not always start with the FileName tag, time stamps were incorrectly formatted etc.
Stability issues are addressed by added checks, originally written by Johan Thelin
<johan.thelin@pelagicore.com>, who never upstreamed them. I've also added an option for getting full
SPDX output from FOSSology, i.e. not only for all files, but for the package as well, including
license references. License refs are required in order to process the output by SPDXTools. For that
reason, this option defaults to true.
Signed-off-by: Tobias Olausson <tobias.olausson@pelagicore.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
${INCOMPATIBLE_LICENSE}
The db 6.0.30's LICENSE is 'AGPL-3.0', and db 5.3.28 LICENSE is
'Sleepycat'
While building rpm image with "AGPL-3.0" in ${INCOMPATIBLE_LICENSE},
db 6.0.30 and db-native 5.3.28 were built, the different versions
caused the rpm doesn't work on target.
...
root@qemux86-64:~# rpm -qa
|rpmdb: BDB2531 Unacceptable log file /var/lib/rpm/./log/log.0000000001:
unsupported log version 21
|rpmdb: BDB2527 Invalid log file: log.0000000001: Invalid argument
|rpmdb: BDB0061 PANIC: Invalid argument
|==> rpmdbe_event_notify(0x623f40, PANIC(0), 0x7fffee0fbc0c) app_private
(nil)
|rpmdb: BDB1546 unable to join the environment
|error: db_init:tmp/work/core2-64-poky-linux/rpm/5.4.14-r0/rpm-5.4.14/
rpmdb/db3.c:1144: dbenv->open(-30973): BDB0087 DB_RUNRECOVERY: Fatal
error, run database recovery
...
[YOCTO #6858]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using other toolchain layers, it does not pick
the OE-Core version eventhough not specified, its because
we did not pin it.
Change-Id: Ic47fd607a2a6535dd157d8afdd004197d2a6f60b
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently linux-firmware rebuilds for each machine due to its usage of
update-alternatives which in turn means a dependency on opkg-utils.
Marking opkg-utils as ABISAFE is the only option we have right now
to avoid this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently allarch recipes using useradd rebuild each time MACHINE
changes which is not desireable. Adding the useradd dependencies
to this list ensures they do not change under these circumstances.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Document IMAGE_BOOT_FILES variable.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously, when building core-image-minimal, the rootfs size would
default to 64M because we use '?=' in bitbake.conf and also '?=' in
core-image-minimal.bb.
The thing is, we'd like to have a default value for all images set
in bitbake.conf but still allow each image recipe to set its own default
value which could be overridden by users in local.conf.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
glibc 2.20+ wont support any older than that
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Change references in documentation appropriately
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Adjust naming conventions to reflect eglibc->glibc move
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Updating the linux-libc-headers to the 3.16 release. This matches the
current -dev kernel version, and is compatible with the existing
named kernel versions (3.10, 3.14).
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
v2: rename file
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
v2: rename file
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
V2: rename file
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
QEMU is capable of emulating four different VGA adapters: cirrus, std, vmware,
and QXL. By adding the cirrus and fbdev X.Org drivers to the qemux86-64 image,
the image can be made to launch an X server on when cirrus and std are chosen,
in addition to just vmware. (The build of QEMU in OE-Core appears to have QXL
disabled, meaning a driver for it is unnecessary.)
The runqemu script now allows the choice of emulated VGA adapter to be
specified manually, so it's important that qemux86-64 supports any configuration
the user might choose without requiring the image to be rebuilt.
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
QEMU is capable of emulating four different VGA adapters: cirrus, std, vmware,
and QXL. By adding the cirrus and fbdev X.Org drivers to the qemux86 image,
the image can be made to launch an X server on when cirrus and std are chosen,
in addition to just vmware. (The build of QEMU in OE-Core appears to have QXL
disabled, meaning a driver for it is unnecessary.)
The runqemu script now allows the choice of emulated VGA adapter to be
specified manually, so it's important that qemux86 supports any configuration
the user might choose without requiring the image to be rebuilt.
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Might as well move this default to the class which uses it allowing
for easier reading/understanding of the class.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently its near impossible for other classes to sanely override
this value with their own default. By setting a weak default we can
allow other classes to change the default and allow end recipes to
again override this.
As far as I can tell, there shouldn't be any regressions from this
change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The MIPS emulation for qemumips actually supports
mips32r2:
isa : mips1 mips2 mips32r1 mips32r2
We should probably use that tuning file.
This implicitly changes the default value of DEFAULTTUNE to
mips32r2.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A few native scipts requires bash-native, and we don't build
bash-native, so add it to ASSUME_PROVIDED.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now there are other PACKAGECONFIG options to qemu, we need
to append to the list.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the specific scripts and mtrace versions to the preferred version list.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* update-rc.d now adds initscripts dependency even to allarch recipes
making them effectively TUNE_PKGARCH, "fix" it by excluding
initscripts from all signatures
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As the do_package_write() task is listed as deleted, remove the few
remaining references.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes, binutils-crosssdk needs to be override,
like is the case for producing Darwin cross SDK.
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The `groupdel' command doesn't support '-g' option, so remove it.
[YOCTO #6575]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #4073]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Without this, you are not able to use mips32r2 on a mips64 based tune.
We want to be able to do a tri-lib system of mips64, mips64-n32 and mips32r2.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The initrd image used by the Linux kernel is list of file system images
concatenated together and presented as a single initrd file at boot time.
So far the initrd is a single filesystem image. But in cases like to support
early microcode loading, the initrd image need to have multiple filesystem
images concatenated together.
This commit is extending the INITRD variable from a single filesystem image
to a list of filesystem images to satisfy the need mentioned above.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When adding patches or config files from bbappend files, it requires
the use of FILESEXTRAPATHS, which has been an issue and failure point
for people starting to work with bitbake and oe-core.
We add checking to standardize how to use FILESEXTRAPATHS. Only the
format of:
FILESEXTRAPATHS_append := ":${THISDIR}/Your_Files_Path" or
FILESEXTRAPATHS_prepend := "${THISDIR}/Your_Files_Path:"
is acceptable.
[YOCTO #5412]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, BB_NUMBER_THREADS and PARALLEL_MAKE default to unset and
are set in local.conf. Now that we have the automatic probing,
the default values can be set in bitbake.conf and an example of
explicitly defining how many tasks to run can be moved to
local.conf.sample.extended.
[YOCTO #6217]
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now that all licenses are canonicalised to SPDX names when processing, we need
to rename the whitelists to the match.
[RP: Fixed up multilib.bbclass too]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Peter A. Bigot
Koen Kooi
Ross Burton
Richard Purdie
Belen Barros Pena
Alexandru DAMIAN
Richard Tollerton
Paul Eggleton
Peter Seebach
Robert Yang
Tobias Olausson
Hongxu Jia
Saul Wold
Khem Raj
Jonathan Liu
Maciej Borzecki
Chen Qi
Bruce Ashfield
Armin Kuster
Max Eliaser
Mark Hatle
Martin Jansa
Robert P. J. Day
Nitin A Kamble
Cristian Iorga
Roxana Ciobanu