aboutsummaryrefslogtreecommitdiffstats
path: root/meta/conf/machine
AgeCommit message (Collapse)Author
2016-10-31conf: Use xf86-input-libinput by defaultJussi Kukkonen
Don't install legacy X input drivers for any machines by default, RRECOMMEND xf86-input-libinput instead. This is the setup suggested by upstream: install only libinput by default, but let niche legacy drivers sort higher in configuration so they get chosen if installed. So the order is: evdev < libinput < (synaptics|vmmouse|...) This also removes vmmouse X driver from the qemu config. If a VMware virtual mouse device really needs to be supported, we should enable CONFIG_MOUSE_PS2_VMMOUSE in kernel instead: that is directly supported by the libinput X driver. Fixes [YOCTO #10195]. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15arch-mips.inc: remove duplicates from PACKAGE_ARCHSRobert Yang
Fixed: MACHINE = "qemumips64" DEFAULTTUNE = "mips64-o32" $ bitbake linux-yocto ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: Error, the PACKAGE_ARCHS variable contains duplicates. The following archs are listed more than once: mips64-o32 Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-15x86-base: Update version to 4.8Saul Wold
This update will avoid confusion with other parts of OE-Core that set the kernel version to 4.8 for qemux86* and genericx86*. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-10-07arch-mips: Add mipsisa{32, 64}r6{el, } tunesZubair Lutfullah Kakakhel
Add support for MIPS Release 6 ISA and the various tune configurations. This patch adds the tunes for 32r6 and 64r6 n64 and not the n32 variants at the moment. Release 6 onwards, the tuples are now - mipsisa32r6-linux-gnu - mipsisa32r6el-linux-gnu - mipsisa64r6-linux-gnuabi64 - mipsisa64r6el-linux-gnuabi64 - mipsisa64r6-linux-gnuabin32 - mipsisa64r6el-linux-gnuabin32 For more details, check https://wiki.debian.org/Multiarch/Tuples Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-27machine/qemu*: Add comment regarding the reason for virtio-rng-pciNathan Rossi
Bring across the comment that was in runqemu regarding why the virtio-rng-pci device was needed. This comment is added to each location where the virtio-rng-pci device is added. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-23arch-mips: Add mips64-o32 tunesZubair Lutfullah Kakakhel
Add mips64 + o32 rootfs abi tune configurations Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-23tune-ppc[65]00.inc: Disable QEMU usermode usageOtavio Salvador
The QEMU usermode fails with invalid instruction error when used with those tunes. The issue is being tracked in [YOCTO: #10304]. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-23arch-mips: Add mips64r2 tunesZubair Lutfullah Kakakhel
Add MIPS64r2 optimizations Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-23runqemu: Move virtio RNG to machine configurationNathan Rossi
Not all QEMU machines (outside of those available in OE-Core) are capable of using the virtio-rng-pci device due to various machine models not having a pci/virtio bus. This makes it such that the use of the '-device virtio-rng-pci' flag to QEMU is machine specific. This patch removes the general addition of the flag to all runqemu targets and adds the flag into the QB_OPT_APPEND for all the qemu* machines in OE-Core that support its use (which is all of them). Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-19qemuppc.conf: adjust kernel consoleRobert Yang
Fixed kernel trace when booting: [ 12.825809] random: crng init done [ 13.918323] irq 36: nobody cared (try booting with the "irqpoll" option) [ 13.924821] CPU: 0 PID: 335 Comm: getty Not tainted 4.8.0-rc5-yocto-standard #1 [ 13.930492] Call Trace: [ 13.936214] [cff73f20] [c00790f0] __report_bad_irq.isra.0+0x3c/0x128 (unreliable) [ 13.941908] [cff73f40] [c0079518] note_interrupt+0x2b8/0x304 [ 13.947265] [cff73f70] [c00766f4] handle_irq_event_percpu+0x5c/0x74 [ 13.952503] [cff73f90] [c0076768] handle_irq_event+0x5c/0xdc [ 13.957667] [cff73fa0] [c007a29c] handle_fasteoi_irq+0xdc/0x234 [ 13.962984] [cff73fc0] [c007592c] generic_handle_irq+0x3c/0x58 [ 13.968288] [cff73fd0] [c0006c74] __do_irq+0x54/0x18c [ 13.973612] [cff73ff0] [c000f9c8] call_do_irq+0x24/0x3c [ 13.978742] [cf0cdb70] [c0006e40] do_IRQ+0x94/0x110 [ 13.983992] [cf0cdba0] [c001215c] ret_from_except+0x0/0x14 [ 13.989281] --- interrupt: 501 at pmz_set_termios+0x130/0x6d8 [ 13.989281] LR = pmz_set_termios+0xf0/0x6d8 [ 13.999353] [cf0cdc90] [c049f130] uart_change_speed.isra.2+0x60/0x168 [ 14.004436] [cf0cdcb0] [c049fdbc] uart_startup.part.8+0xec/0x1e0 [ 14.009625] [cf0cdce0] [c04a0ab4] uart_open+0x138/0x16c [ 14.014723] [cf0cdd00] [c047e510] tty_open+0x118/0x65c [ 14.019743] [cf0cdd60] [c01894c8] chrdev_open+0xdc/0x1e0 [ 14.024616] [cf0cdd90] [c01807d0] do_dentry_open+0x23c/0x358 [ 14.029418] [cf0cddc0] [c0194878] path_openat+0x58c/0x1084 [ 14.034054] [cf0cde50] [c01965b4] do_filp_open+0xbc/0x10c [ 14.038539] [cf0cdf00] [c01822fc] do_sys_open+0x154/0x224 [ 14.043105] [cf0cdf40] [c0011a44] ret_from_syscall+0x0/0x38 [ 14.047828] --- interrupt: c01 at 0xfeef5a0 [ 14.047828] LR = 0xfeef544 [ 14.056543] handlers: [ 14.060980] [<c04a2b10>] pmz_interrupt [ 14.065468] Disabling IRQ #36 Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-16qemuboot-x86: Add task_timeout = -1 to uvesafbSaul Wold
This causes the default timeout to be set to infinity, it will still report out every 5000 milliseconds Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09runqemu: Allow unique network interface MAC addressesRichard Purdie
Current qemu instances all share the same MAC address. This shouldn't be an issue as they are all on separate network interfaces, however on the slight chance this is causing problems, its easy enough to ensure we use unique MAC addresses based on the IP numbers we assign. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemu.inc: inherit qemuboot.bbclassRobert Yang
All qemu boards should be able to boot by runqemu. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuppc: Use virtio networking instead of pcnetRichard Purdie
qemuppc can use virtio networking and we may as well do so for better prformance as we do under the other emulated hardware. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuppc.conf: set vars for runqemuRobert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemumips/qemumips64.conf: set vars for runqemuRobert Yang
Add qemuboot-mips.inc to reduce duplicated code, the various mips bsps which can be boot by runqemu can require qemuboot-mips.inc Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemux86.conf/qemux86-64.conf: set vars for runqemuRobert Yang
Add qemuboot-x86.inc to reduce duplicated code, the x86/x86_64 bsps which can be boot by runqemu can require qemuboot-x86.inc. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm64.conf: set vars for runqemuRobert Yang
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm.conf: set PREFERRED_VERSION_linux-yoctoRobert Yang
The base_version_less_or_equal() will raise errors if PREFERRED_VERSION_linux-yocto is None. For example, when we build DISTRO = "nodistro", PREFERRED_VERSION_linux-yocto is not be defined since it is defined in poky.conf, and then bitbake will choose the higher version which is 4.8 currently, so set PREFERRED_VERSION_linux-yocto to 4.8, otherwise, runqemu can't boot it. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm: Add DTB file new kernelRichard Purdie
For kernels after 4.7, we need to ensure the DTB file for the kernel is used by runqemu. Doing this conditionally based upon the kernel verison being built seems to be the only way forward for this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm.conf: set vars for runqemuRobert Yang
These info are from old runqemu. Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-03arch-mips.inc: Disable QEMU usermode usage when building with n32 ABIAlexander Kanavin
QEMU usermode doesn't support n32 binaries, erroring with "Invalid ELF image for this architecture". Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-23xserver-xf86-config: pre-load int10 and exa modulesKhem Raj
musl doesn't like lazy loading that xorg uses, therefore load the needed modules explicitly [YOCTO #10169] Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-08-01tune-mips-24k: add QEMU_EXTRAOPTIONS for DSP and MIPS16e coresAndré Draszik
The core emulated by default by qemu-mips(el) just crashes with illegal instruction when encountering DSP and/or MIPS16e instructions - we have to specify a CPU that supports the extra instructions. This is an issue when generating a rootfs and e.g. running some of the package postinstall scriptlets. The patch to qemu to add 24KEc as a CPU has been accepted upstream, so let's use that CPU here as well as needed. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-10tune-ppce500mc.inc: pass -mcpu=e500mc for ppce500mc kernel compileZhenhua Luo
Currently the -mcpu parameter is not passed to cross gcc when assembling kernel .S file, the implicit -mcpu option that defaults to the latest server cpu might casuse incorrect assembling. A existent case is that wait instruction of ppce500mc is incorrectly assembled to power9 version with default -mcpu setting, accordingly kernel boot calltrace happend when wait instruction is executed on ppce500mc targets. Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-06-12mips: add tunes for (some) 24K coresAndré Draszik
- add 24kc big and little endian, which is based on mips32r2 w/o FPU - add 24kec which is 24kc + DSP - both can have the MIPS16e ASE enabled in their tunes Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-06-12mips: add a tune for using MIPS16e ASE instructionsAndré Draszik
The MIPS16e instruction set still has to be enabled by setting MIPS_INSTRUCTION_SET = 'mips16e' in e.g. distro.conf and can be disabled on a per-recipe basis as needed. This is a similar approach as is available on ARM for Thumb support. Note that contrary to the ARM Thumb support in OE, we do add a new OVERRIDE (mips16e), as there are some recipes in OE that need to be compiled slightly differently if mips16e mode is requested. Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-05-14feature-arm-vfp.inc: fix overzealous ARMPKGSFX_FPU modificationAndré Draszik
Since commit 972b4fc (feature-arm-neon.inc: restore vfpv3-d16 support) we're replacing _all_ dashes (-) in ARMPKGSFX_FPU, which is causing problems for all legitimate uses of the dash as TUNE_PKGARCH doesn't have the right value anymore: E.g. on raspberrypi2: ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: Error, the PACKAGE_ARCHS variable (all any noarch armv5hf-vfp armv5thf-vfp armv5ehf-vfp armv5tehf-vfp armv6hf-vfp armv6thf-vfp armv7ahf-vfp armv7at2hf-vfp armv7vehf-vfp armv7vet2hf-vfp armv7vehf-neon armv7vet2hf-neon armv7vehf-neon-vfpv4 armv7vet2hf-neon-vfpv4 cortexa7hf-vfp cortexa7hf-neon cortexa7hf-neon-vfpv4 cortexa7t2hf-vfp cortexa7t2hf-neon cortexa7t2hf-neon-vfpv4 raspberrypi3) for DEFAULTTUNE (cortexa7thf-neon-vfpv4) does not contain TUNE_PKGARCH (cortexa7hf-neonvfpv4). Fix this by being more explicit about what we're modifying. Reported-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-05-11feature-arm-neon.inc: restore vfpv3-d16 supportAndré Draszik
Commit 6661718 (feature-arm-{neon,vfp}.inc: refactor and fix issues) effectively changed the gcc -mfpu= option from -mfpu=vfpv3-d16 to -mfpu=vfpv3d16, which gcc doesn't understand. Restore the original value. After doing that, we also need to adjust ARMPKGSFX_FPU which should contain the same value without dash '-' as it is used that way throughout. Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-05-06tune-mips32r2.inc: add soft-float variantsAndré Draszik
Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-05-06arch-powerpc64.inc: disable the use of qemu usermode on ppc64Alexander Kanavin
It simply does not work at all: https://lists.yoctoproject.org/pipermail/yocto/2016-April/029698.html Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-05-06arch-armv7ve: inherit armv7a tunes fileDenys Dmytriyenko
armv7a is a subset of armv7ve: https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html -march=armv7ve is the armv7-a architecture with virtualization extensions. By inheriting armv7a from armv7ve it's possible for e.g. Cortex-A15 machines to include tune-cortexa15.inc and have a full range of optimizations, but set DEFAULTTUNE as "armv7a" to produce binaries compatible with Cortex-A8 machines, etc. Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-28bitbake.conf: rename 'gobject-introspection-data' machine feature to ↵Alexander Kanavin
'qemu-usermode' The new value is more general and better reflects what having the feature really means. Introspection data, then, is built only if 'gobject-introspection-data' is in DISTRO_FEATURES and 'qemu-usermode' is in MACHINE_FEATURES. Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-24x86-base.inc: suggest the latest kernelMaxin B. John
Use latest 4.x kernel instead of 3.x version Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-23tune-arm926ejs: Handle missing thumb suffixJens Rehsack
When enabling tune for arm926ejs, poky optionally appends suffixes for thumb and dsp support. Since sometimes arm926ejse (ARM code) and sometime arm926ejste (thumb code) is used in PACKAGE_ARCH, allow both. Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-20qemuarm64.conf: don't clear MACHINE_FEATURESAndre McCurdy
Accept the default MACHINE_FEATURES from qemu.inc (qemuarm64 shouldn't need to be a special case). Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-03-12machine/include/arch-x86: Make x32 ABI not supporting gobject-introspection-dataRichard Purdie
x32 isn't supported by user mode qemu so we can't build gobject-introspection-data, so disable it in this case. (From OE-Core rev: 4ee1eb8ddd3fbe144fbaeb32e07b66e191aa7548) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-09tune-corei7.inc: Fix PACKAGE_EXTRA_ARCHS for corei7-32Chang Rebecca Swee Fun
Change the name to core2-32 from core2. There's no AVAILTUNES with the name core2. Make sure that we specify the correct TUNE name so PACKAGE_EXTRA_ARCHS is expanded correctly. [ YOCTO #9197 ] Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> Signed-off-by: Anuj Mittal <anujx.mittal@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-07tune-cortexa17.inc: apply changes similar to a15Trevor Woerner
Apply the same sort of changes to the Cortex-A17 tune as were done in commit 35392025f3236f5e5393f9cf0857732da9a2e503. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-06feature-arm-thumb.inc: Fix thumb tune override warningNathan Rossi
Fix the quotes in the bb.utils.contains feature check so that the call results in a boolean value instead of a string, which allows the warning check to occur. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-28tune-cortexa9.inc: add vfpv3 tunesRichard Tollerton
Define tunnings to enable 32 register VFPv3 for cortexa9 processor cores More details: http://www.arm.com/products/processors/technologies/vector-floating-point.php Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-02-15qemu.inc: Add rng-tools to qemu imagesSaul Wold
This patch adds rng-tools to MACHINE_EXTRA_RRECOMMENDS so that can be used to provide the additional entropy to prevent hangs in getrandom() for qemu images [YOCTO #8681] [YOCTO #8816] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-02-11tune-corei7.inc: tell qemu to emulate a matching processorRoss Burton
If tune-corei7 is in use then the target binaries may contain instructions that qemu-x86-64 can't execute by default, resulting in errors on rootfs construction: NOTE: Running intercept scripts: NOTE: > Executing update_font_cache intercept ... qemu: uncaught target signal 4 (Illegal instruction) - core dumped In this case the instruction is popcnt, part of SSE4.2, so tell Qemu to emulate the CPU that the tune targets (in this case, Nehalem). Also pass check=false as the Nehalem machine supports VME but user-space qemu doesn't, which produces a warning unless CPUID checking is disabled. [ YOCTO #8888 ] Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-02-02machine/include: drop tune-cortexm*.inc and tune-cortexr4.incAndre McCurdy
The Cortex M1, M3 and R4 CPU tuning files are poorly tested (if at all). They have no obvious users either inside or outside oe-core. Until OE officially gains support for CPUs without an MMU, these tuning files are probably better maintained outside of oe-core (e.g. in a separate meta-nommu layer). Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-30gcc, qemuppc: Explicitly disable forcing SPE flagsKhem Raj
G4 does not have SPE, so we make that explicit in the tune files and since we emulate G4 when building Qemu, we ensure it for qemuppc as well. GCC config for powerpc-linux is made to include SPE by default which is equivalent if the tripet was powerpc-linux*spe, this forces gcc to configure assembler to enable -mspe by default, when we do that then the kernel fails to compile with binutils 2.26, since newer assembler is smart to detect the tlbia instructions are not compatible with SPE and hence the kernel build breaks rightly. We configure the kernel for G4 as well where it enables tlbia instrucitons rightly so because it thinks its being configured for power4. So we keep the options but do not force -mspe down to assembler as default. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-01-07tune-*: use mcpu instead of mtune for ARM tunesMartin Jansa
* since: commit cffda9a821a3b83a8529d643c567859e091c6846 Author: Martin Jansa <Martin.Jansa@gmail.com> Date: Tue Sep 11 17:05:45 2012 +0000 arch-arm: define different ARMPKGARCH when different CCARGS are used we don't need to worry about e.g. cortexa7 device upgrading binary package from armv7a feed which would be built with -mcpu=cortexa15, so we can use -mcpu instead of -mtune, because we won't share the binary feed with MACHINEs built with different tune. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07arch-armv7ve: add tune include for armv7ve and use it from cortexa7 and ↵Martin Jansa
cortexa15 * be aware that this -march value is available only in gcc-4.9 and newer: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57907 * -mcpu=cortex15 and -mcpu=cortexa7 conflict with -march=armv7a We either have to stop putting -march in default CCARGS or at least set it compatible one like this patch does. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07cortexa{7,15,17}: add VFPv4 tunesMartin Jansa
* it was added only to hf cortexa7 in: commit e97d152ca13556b41a236c1a4cfb11e77ff857d7 Author: Kristof Robot <krirobo@gmail.com> Date: Sun Jan 26 10:03:56 2014 +0100 Add Cortex A7 support for NEONv2 & FPv4 * add it to softfp cortexa7 and both versions for cortexa15 and cortexa17 tunes Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07feature-arm-vfp.inc: Further simplify with TUNE_CCARGS_MFLOATMartin Jansa
* add TUNE_CCARGS_MFLOAT variable which is used to set -mfloat-abi parameter as well as ARMPKGSFX_EABI suffix in TUNE_PKGARCH and TARGET_FPU * TARGET_FPU was using ARMPKGSFX_FPU, but in most cases we use it only to distinguish between hard and soft abi, not various -mfpu variants which can appear in ARMPKGSFX_FPU Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-01-07feature-arm-{neon,vfp}.inc: refactor and fix issuesMartin Jansa
* respect all 4 vfp options ('vfp', 'vfpv3d16', 'vfpv3', 'vfpv4') when setting -mfloat-abi and ARMPKGSFX_EABI, without this change it wasn't possible to use call-convention hard together with vfpv4 * move 'vfpv3d16', 'vfpv3', 'vfpv4' support from feature-arm-vfp.inc to feature-arm-neon.inc the main difference is that feature-arm-vfp.inc is included in arch-armv5.inc while feature-arm-neon.inc only in armv7*.inc, so these options should be added to TUNEVALID also only for armv7* MACHINEs. * support vfpv4 with or without neon when both vfpv4 and neon are in TUNE_FEATURES we want to set only one -mfpu parameter and to neon-vfpv4 * prevent multiple appends to ARMPKGSFX_FPU, we don't want to include e.g. -vfp as well as -vfpv4 when both "vfp" and "vfpv4" are in TUNE_FEATURES * add -mfpu=vfp for tunes with "vfp" in TUNE_FEATURES - before that we were only adding -vfp to ARMPKGSFX_FPU * add TUNE_CCARGS_MFPU variable which is used to set -mfpu parameter as well as ARMPKGSFX_FPU suffix in TUNE_PKGARCH, all enabled values are appended to it based on TUNE_FEATURES and then the last one is used in the actual param and suffix * this prevents multiple -mfpu options in TUNE_CCARGS * !!! This means we need to change TUNE_PKGARCH and PACKAGE_EXTRA_ARCHS for vfpv4, vfpv3d16, vfpv3 tunes, because the -vfp* isn't prependend multiple times. If you're using one of these new DEFAULTTUNES (which were at least partially broken anyway) and depend on working binary package feed upgrade-path, then don't forget to migrate PR service database to new TUNE_PKGARCH. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-28 08:47:06 +0000