| Age | Commit message (Collapse) | Author |
|---|
|
CMake wants a relative path for CMAKE_INSTALL_*DIR, an absolute path
breaks cross-compilation. This fact is documented in the following
ticket: https://cmake.org/Bug/view.php?id=14367
$sysconfdir and $localstatedir are not relative to $prefix, so they are
still set as absolute paths. With his change ${PROJECT}Targets.cmake
that are generated by cmakes "export" function will contain relative
paths instead of absolute ones.
Signed-off-by: Thomas Witt <Thomas.Witt@bmw.de>
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Excluded removal of do_bootimg, do_bootdirectdisk and do_vmimg
timestamps to prevent unneeded rootfs rebuilds.
[YOCTO #10159]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Now, useradd dollar sign requires three prepending backslash characters to
avoid unintended expansion. It used to be just one prepending backslash
character before Krogoth. Restore that behaviour.
[YOCTO #10062]
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of just removing TMPDIR from the path for display, optionally allow a
package to be passed and remove PKGDEST/package too.
This means that messages that specify a package name can pass that name and the
resulting path will be absolute inside that package.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The path in startup.nsh for iso image is corrupted as follows:
fs0:\EFI\BOOT^Hootx64.efi
Using printf will emit correct path which is:
fs0:\EFI\BOOT\bootx64.efi
This happens because of echo command. Switching to printf
like the one used in efi_populate() function.
Signed-off-by: Pranav Tipnis <pranav.tipnis@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
"bitbake recipe -ccleansstate" should remove binary pkgs from deploy dir
as normal cleansstate does without packagefeed-stability.bbclass.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #10164]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
build_syslinux_cfg function creates syslinux configuration file.
The code assumes that the output directory exists, which is not
always the case. For example rm_work task removes rootfs directory
structure and causes build_syslinux_cfg to fail with this error:
Unable to open ../<image>-<version>/syslinux_vm.cfg
Made build_syslinux_cfg depend on output directory to ensure that
directory is created before running the function.
[YOCTO #10159]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This likely used to work when we expanded python functions and broke when
we stopped. Since it defaults to "", it never caused an issue but
is incorrect usage so fix it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the enhanced functionality, the term "compression" is no longer
accurate, because the mechanism also gets used for conversion
operations that do not actually compress data.
It is possible to remove this naming problem in a backward-compatible
manner by including COMPRESSIONTYPES in CONVERSIONTYPES and checking for
the old COMPRESS_CMD/DEPENDS as fallbacks.
[YOCTO #9346]
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We've been running with a set of kern-tools that were designed to work
with build systems that knew nothing about git, trees, commits, etc.
As such, there's been a set of shims/wrappers in place to work with
within bitbake/oe-core. These were the *me scripts: createme, updateme,
patchme and configme.
With this commit, we strip that legacy code and use the tools directly.
This means less complexity, fewer corner cases .. and no surprises
when the tools are arunning. As another benefit, the tools consume
much less time during a typical build and have no noticeable impact
on the overall build time.
Existing .scc files, features, and processing are not impacted as
these tools are compatible with existing feature descriptions and
kerne configuration fragments.
The audit of kernel configuration fragments is now detached
from the linux-yocto build structure and process. This means that
they can eventually be tweaked to offer kernel audit to any type of
kernel build and configuration process.
Additionally, the kernel symbol audit phase can now resolve symbol
dependencies and offer guidance when a symbol is missing:
WARNING: linux-yocto-4.4.15+gitAUTOINC+b030d96c7b_f5e2c49d58-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration:
---------- CONFIG_BT_6LOWPAN -----------------
Config: CONFIG_BT_6LOWPAN
From: /home/bruce/poky/build/tmp/work-shared/qemux86-64/kernel-source/.kernel-meta/configs/standard/features/bluetooth/bluetooth.cfg
Requested value: CONFIG_BT_6LOWPAN=y
Actual value:
Config 'BT_6LOWPAN' has the following conditionals:
BT_LE && 6LOWPAN (value: "n")
Dependency values are:
BT_LE [y] 6LOWPAN [n]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We expect that any package that uses the npm bbclass
will have a runtime dependency on node.js
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The preparation script itself prints out an error on failure, and we
aren't redirecting its output anymore, so we no longer need to print out
a message here when it fails. At the same time, make the message printed
out by the script a little clearer - we're just writing the log out to
the file, we shouldn't give the user an expectation that there will be
extra details in there (other than the output produced by
oe-init-build-env there won't be).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Check a number of things as early as possible in the eSDK installer
script so that the user gets an error up front rather than waiting for
the build system to be extracted and then have the error produced:
* Check for missing utilities specified in SANITY_REQUIRED_UTILITIES
(along with gcc and g++), taking into account that some of these are
satisfied by buildtools which ships as part of the SDK. We use the
newly added capability to list an SDK's contents to allow us to see
exactly which binaries are inside the buildtools installer.
* Check that Python is available (since the buildtools installer's
relocate script is written in Python).
* Check that locale value set by the script is actually available
* Check that the install path is not on NFS
This does duplicate some of the checks in sanity.bbclass but it's
difficult to avoid that given that here they have to be written in shell
and there they are written in Python, as well as the fact that we only
need to run some of the checks here and not all (i.e. the ones that
relate to the host system or install path, and not those that check the
configuration or metadata). Given those issues and the fact that the
amount of code is fairly small I elected to just re-implement the checks
here.
Fixes [YOCTO #8657].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Determine the name of the current buildtools installer ahead of time,
set it in a variable and use that variable rather than the wildcarded
version everywhere, since it's much tidier.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the buildtools installation failed, we were using a subshell instead
of a compound command and thus the subshell exited but the script
continued on, which is really not what we want to happen. Additionally
log the buildtools installer output to a file and cat it if it fails so
that you can actually see what went wrong, as well as amending the
environment setup script to print a warning as we do when the
preparation fails.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A couple of fixes for the recent sstate filtering implemented in OE-Core
revision 4b7b48fcb9b39fccf8222650c2608325df2a4507:
* We shouldn't be deleting the downloads directory here, since it
contains the uninative tarball that we will need
* TMPDIR might not be named "tmp" - in OE-Core the default is tmp-glibc
so use the actual name of TMPDIR here instead.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the build in which the eSDK is being built isn't using uninative,
this will have an effect on NATIVELSBSTRING, which will mean that the
eSDK installer won't be able to find any of the native sstate packages.
To keep things simple, under this scenario just disable uninative
temporarily while we run the SDK installer to help us check the presence
of the sstate artifacts we need. Ideally I'd rather not have things like
this that are artificial in this verification step, but on the other
hand this was the least ugly way to solve the problem.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We were relying on uninative being enabled in the build in which the
eSDK was being produced, which is not the case for example for OE-Core's
default configuration. Move the code that copies the uninative tarball
and writes the checksum to copy_buildsystem so that it happens early
enough for that part of the configuration to be set up when we do the
filtering (which requires running bitbake).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Removing the ccache directory as part of do_clean is unnecessarily
conservative and defeats many of the benefits of ccache.
The original justification for this behaviour was to avoid confusion
in the corner case that the ccache directory becomes corrupted.
However the standard approach for dealing with such highly unlikely
corner cases (ie manually removing tmp) would also recover from
corruption of the ccache directories, without the negative impact of
defeating ccache during normal development.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If /bin/sh is a regular file (and not a symlink), we assume it's a
reasonable shell and allow it.
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
By default the system will expand the extra os entries for uclibc and musl
even if they are not enabled in the build. There was no way to prevent this
behavior while still getting the expansion for things like x32 or spe.
The change adds a new setting which a distribution creator can override
easily, setting the base set of canadianextraos components. The other
expansions are then based on this setting.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently the code gives tracebacks if there are no recipes to be built in a
BuildStarted event. Parse the list into a string rather than just taking the
first item. There is nothing special about the first time.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Give each rootfs its own RPM channel to use. This puts the RPM metadata
in a private subdirectory of $WORKDIR, rather than living in DEPLOY_DIR
where other tasks may race with it.
This allows us to reduce the time that the rpm.lock is held to only the
time needed to hardlink the RPMs, allowing the majority of the rootfs
operation to run in parallel.
Also, this fixes the smart tests by generating an index for all packages
at the time of the test, rather than using the one provided by the
rootfs process.
Original credit for the enhancement should go to Steven Walter
stevenrwalter@gmail.com.
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Prior to running oe_runmake make sure $B is the cwd. This is required
due to bitbake commit 67a7b8b021badc17d8fdf447c250e79d291e75f7
"build: don't use $B as the default cwd for functions".
Without this change, do_concat_dtb fails with:
| ERROR: oe_runmake failed
| make: *** No targets specified and no makefile found. Stop.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Handle u-boot.rom signing (U-Boot as x86 BIOS replacement) the same way
that u-boot.img signing is handled.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For x86, bzImage must be built instead of zImage.
Include setup.bin (which is required to boot the kernel) in the fitimage
and always use a load/boot address of 0x00090000.
For details see:
http://git.denx.de/?p=u-boot.git;a=blob;f=doc/uImage.FIT/x86-fit-boot.txt
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If INITRAMFS_IMAGE is set, build an additional fitImage containing the
initramfs. Copy the additional fitImage and the source (*.its) file, used
to create it to DEPLOYDIR. The fitImage containing the initramfs must be
built before do_deploy and after do_install to avoid circular dependencies.
UBOOT_RD_LOADADDRESS - Specifies the load address used by u-boot for the
initramfs.
UBOOT_RD_ENTRYPOINT - Specifies the entry point used by u-boot for the
initramfs.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Prior to assembling the fitimage, ensure that $B is the cwd due to
bitbake commit 67a7b8b021badc17d8fdf447c250e79d291e75f7 "build: don't
use $B as the default cwd for functions".
Without this change, do_assemble_fitimage() fails like:
Log data follows:
| DEBUG: Executing shell function do_assemble_fitimage
| arm-ka-linux-gnueabi-objcopy: 'vmlinux': No such file
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_assemble_fitimage
Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* Fix multilib + rpm since its multilib package name is special.
* Update SSTATE_DUPWHITELIST to avoid shared location conflicted error.
* Fix message when "not copying", now the messages are:
Copying packages for recipe <foo>
Not copying packages for recipe <foo>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is a non-functional change, which intends to correct element
names of a tuple returned by Popen.communicate().
Both in python2 and python3 subprocess.Popen.communicate() method
returns a tuple (stdoutdata, stderrdata), thus old assignments and
collateral comments are incorrect from human's point of view, however
formally there is no error in the code.
The change is desired to have to avoid copy-paste errors in future.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is a non-functional change, which intends to correct element
names of a tuple returned by Popen.communicate().
Both in python2 and python3 subprocess.Popen.communicate() method
returns a tuple (stdoutdata, stderrdata), thus old assignments and
collateral comments are incorrect from human's point of view, however
formally there is no error in the code.
The change is desired to have to avoid copy-paste errors in future.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously, find_license_files() in license.bbclass just blindly assumed
that all different licenses specified in LIC_FILES_CHKSUM have unique
filenames. As a consequence, only the last one of these similarly named
license files was copied and the rest were "lost". This patch changes
the behavior so that all license files get copied. However, if multiple
identically named files are found, they are renamed to <file>.0,
<file>.1 etc.
The patch also changes the handling of NO_GENERIC_LICENSE slightly.
Previously, only basenames of NO_GENERIC_LICENSE and LIC_FILES_CHKSUM
were compared when searching for the correct license file. After this
patch NO_GENERIC_LICENSE must have the full path, matching what is
specified in LIC_FILES_CHKSUM. This is required in order to be able
to handle identical filenames (basenames) consistently. For example, if
you have:
LICENSE = "my-custom-license"
LIC_FILES_CHKSUM = "file://src/LICENCE;md5=d41d8cd98f00b204e9800998ecf8427e"
you must specify:
NO_GENERIC_LICENSE[my-custom-license] = "src/LICENCE"
[YOCTO #9663]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
This code was outputting variables by iterating a dictionary. In Py2 this
always results in the same iteration order but with Py3 the order changes every
execution, which resulted in buildhistory having to store diffs where fields
were simply re-ordered.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
[YOCTO #9827]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For example in a directory structure like this
.
├── symlink -> foo/bar
└── foo
└── bar
└── file
'file' could be referenced by specifying e.g. 'foo/bar/file' or
'symlink/file'. In cases like this populate_packages() might crash if
the file was referenced (in FILES) via the symlinked directory. The
outcome depends on how the user defined FILES_pn. This patch should
make the function behave more consistently. It looks for files which are
referenced via symlinked directories and handles them separately,
failing if their parent directory is a non-existent path. For example,
defining FILES_{PN} = "symlink/file" causes a build failure because
symlinks target 'foo/bar' is not included at all.
[YOCTO #9827]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
* The mode and owner info are saved in inode, hardlink won't change them,
so remove unneeded chmod() and chown().
* This can avoid the problem that when do_package re-run, the file's mode
maybe different if it is 0444 (changed to 0644 when re-run), this is
caused by pseudo adds 'w' on real file, and doesn't track linked source
when hard link, Peter and Mark may fix pseudo, but the removed code is not
needed, which can avoid the problem.
* To reproduce the problem, for example, version.c from gzip's ${B}:
1) bitbake gzip
2) Edit rpm-native or package.bbclass to make do_package re-run.
3) bitbake gzip
After the first build, build/version.c in gzip-dbg is 0444, but after
the second build, it will be 0644, this because do_package does:
$ ln ${B}/version.c gzip-dbg/version.c,
$ chmod 0444 gzip-dbg/version.c (it runs chmod 0644 on the real filesystem)
And in the second build, the gzip-dbg/version.c will be removed and
created again, so that stat() can't get 0444 but 0644 since
${B}/version.c is not tracked by pseudo.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If the initramfs image is type lzo, then a native lzop is needed.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We need to ensure that builds use our intltool.m4 as there is a bug in
upstream's macros when the host doesn't have XML::Parser installed.
So generalise the m4 pruning logic that we already have from gettext and add
intltool.m4.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To save time move the temporary copy of the autoconf macros, aclocal-copy, from
${B} to ${WORKDIR}. This ensures that it can't conflict with anything in ${S}
and means the pruning code doesn't need to know about it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make sure that we have a pristine source tree after do_unpack.
[YOCTO #9064]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
|
|
Currently packages that contains symlinks can't be extracted
and exported. This allows to export extracted such packages.
A nice side effect is improved readability.
[YOCTO #9932]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
newval is not defined in all cases. Set to None and check if it is set.
File
"/local/foo/builds/x86/layers/openembedded-core/meta/classes/multilib_global.bbclass",
line 90, in preferred_ml_updates(d=<bb.data_smart.DataSmart object at
0xf6fd528c>):
if not d.getVar(newname, False):
> d.setVar(newname, localdata.expand(newval))
# Avoid future variable key expansion
UnboundLocalError: local variable 'newval' referenced before assignment
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
These tasks relied upon [dirs] being ${B} by default. As the functions are not
simple, add back [dirs] so they work again.
[ YOCTO #10027 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
CFLAGS/CXXFLAGS in the SDK environment script adds debug-prefix mappings
that include staging area/work directories. Remove them since the SDK
shouldn't be aware of them.
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This addresses (among others) the following problem:
- USERADD_ERROR_DYNAMIC=error causes a recipe to get skipped
because a static ID entry is missing
- the entry gets added to the file
- using the recipe still fails with the same error as before
because the recipe gets loaded from the cache instead
of re-parsing it with the new table content
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In order to get more information about systemd boot process to
be able to debug random failures due to high I/O.
[YOCTO #9299]
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently when a recipe adds more than one user/group, the
cleansstate task will delete only the first user/group. This
will solve this behavior and delete all users/groups.
[YOCTO #9943]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
I got fed up with seeing items dance around in sstate-package-sizes.txt
in the buildhistory git repo simply because they have the same size.
Let's sort the list first by size and then also by name to ensure items
with the same size are deterministically sorted.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Thomas Witt
Ed Bartosh
Maxin B. John
Ross Burton
Pranav Tipnis
Robert Yang
Jonathan Liu
Richard Purdie
Patrick Ohly
Bruce Ashfield
Henry Bruce
Paul Eggleton
Andre McCurdy
Olof Johansson
Mark Hatle
Stephano Cetola
George McCollister
Andrew Bradford
Vladimir Zapolskiy
Markus Lehtonen
Trevor Woerner
Mariano Lopez
Jeremy Puhlman
Jacob Kroon
Aníbal Limón