| Age | Commit message (Collapse) | Author |
|---|
|
- Import from meta-oe layer
- This is useful for many packages where CR-LF
needs to be adjusted, many recipes depend on it
e.g. meta-multimedia libebml and so on.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This class sets POSTINST_INTERCEPTS and POSTINST_INTERCEPTS_CHECKSUMS,
to allow us to pull intercepts from BBPATH. This is kept as a separate
class, as it's needed by both image construction and sdk construction,
the latter to support meta-toolchain & similar recipes.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using re.compile() is around six times faster than recompiling the regexp
each time so maintain a cache.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
base-passwd|shadow-sysroot recipes
Use the newly introduced SSTATE_EXCLUDEDEPS_SYSROOT for specifying
the base-passwd|shadow-sysroot recipes to be excluded from a recipe sysroot.
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Use the newly introduced SSTATE_EXCLUDEDEPS_SYSROOT for specifying
the *-initial recipes to be excluded from a recipe sysroot.
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, a dependency on any -native recipe will pull in
all dependencies of that -native recipe in the recipe
sysroot. This behaviour might not always be wanted, e.g.
when that -native recipe depends on build-tools that are
not relevant for the current recipe.
This change adds a SSTATE_EXCLUDEDEPS_SYSROOT variable,
which will be evaluated for such recursive dependencies to
be excluded. The idea is similar to
http://lists.openembedded.org/pipermail/openembedded-core/2018-January/146324.html
except that the list is not hard-coded anymore.
SSTATE_EXCLUDEDEPS_SYSROOT is evaluated as two regular
expressions of recipe and dependency to ignore, e.g. in
the above flex-native / bison-native use-case, one would
specify
SSTATE_EXCLUDEDEPS_SYSROOT = ".*->(flex|bison)-native"
in layer.conf.
The existing special handling of "-initial" as well as
"base-passwd" and "shadow-sysroot" could also be
streamlined:
SSTATE_EXCLUDEDEPS_SYSROOT += "\
.*->.*-initial.* \
.*(base-passwd|shadow-sysroot)->.* \
"
Another anticipated user is meta-java, where certain newer
JDKs can only be bootstrapped (built) using older JDKs,
but it doesn't make much sense to copy all those older
JDKs and their own build tools (ant, etc.) into the
sysroot of recipes wanting to be built using the newer JDK
(only), e.g.:
SSTATE_EXCLUDEDEPS_SYSROOT += "\
openjdk-8-native->(ant-native|attr-native|coreutils-native|icedtea7-native|libxslt-native|make-native|openssl-native|zip-native|unzip-native) \
"
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Disable downloading of the vulnerability DB in do_check_cves() task.
When invoked in this task, cve-check-tool attempts re-download of the CVE DB
if the latter is older than certain threshold. While reasonable for a
stand-alone CVE checker, this behavior can cause errors in parallel builds
if the build time is longer than this threshold:
* Other tasks might be using the DB.
* Several packages can start the download of the same file at the same time.
This check is not really needed, as the DB has been downloaded by
cve_check_tool:do_populate_cve_db() which is a prerequisite of any do_build().
The DB will be at most (threshold + build_time) old.
Signed-off-by: Konstantin Shemyak <konstantin.shemyak@ge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
To handle the case where ${COREBASE} isn't the git directory, avoid
erroring out when the git command fails. If we don't have a timestamp
after this, fall back to the timestamp from conf/bitbake.conf.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
nativesdk-gpgme fails package_qa when setting PACKAGE_DEBUG_SPLIT_STYLE
= "debug-with-srcpkg".
ERROR: nativesdk-gpgme-1.10.0-r0 do_package_qa: QA Issue: non debug package contains .debug directory: nativesdk-python3-gpg path /work/x86_64-nativesdk-oesdk-linux/nativesdk-gpgme/1.10.0-r0/packages-split/nativesdk-python3-gpg/usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/usr/lib/python3.5/site-packages/gpg/.debug/_gpgme.cpython-35m-x86_64-linux-gnu.so [debug-files]
This turns out to be because the automatic moving of the -dbg package to
the beginning of the package list is disabled in that case, so the
python3-gpg packages that the recipe prepends to PACKAGES ends up before
the -dbg package.
It's not clear why the "and not split_source_package" was added when
debug-with-srcpkg was introduced. Presumably the intention was to
prevent the -dbg package to end up before the -src package, which we of
course need to. But at the same time, we still need -dbg packages to end
up before all other packages.
Using list.insert(0, ...) also means that if there happens to more than
one -dbg package, their relative ordering gets inverted in the new list.
This tries to fix these issues by sorting the packages by (priority,
original position), where priority is 10 for -src, 30 for -dbg and 50
for everything else. That guarantees that packages of the same "type"
preserve their relative ordering, while also ensuring that -dbg always
preceed other packages. This scheme is also quite extensible, and,
should the need arise, one could even expose the priorities as a knob
the recipe author could use to ensure specific orderings of packages
instead of the somewhat fragile and coarse-grained method of "prepend or
append, and ensure you do that in a proper order".
Probably the autodebug condition needs to stay, but I think the
split_source_package condition in the preceding elif should be removed,
so that that logic applies to all packages called -src, not just the one
we might have created a few lines above.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Files when restored from sstate were missing their sparseness. Fix up various
functions to preserve this and make things more deterministic.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently if you build qemux86 and then generic86, the latter will
remove all of the former from deploy and workdir. This is because
qemux86 is i586, genericx86 is i686 and the architctures are compatible
therefore the sstate 'cleaup' code kicks in.
There was a valid reason for this to ensure i586 packages didn't get into
an i686 rootfs for example. With the rootfs creation being filtered now, this
is no longer necessary.
Instead, save out a list of stamps which a give machine has ever seen in
a given build and only clean up these things if they're no longer
"reachable".
In particular this means the autobuilder should no longer spend a load of time
deleting files when switching MACHINE, improving build times.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Refactor the locale archive function from the SDK to also make it work during
general image creation. This reduces the size of the locales from 900MB to 220MB
in core-image-lsb-sdk.
The exception handling around subprocess was dropped as the standard subprocess
exception printing is better handled than the catchall exception.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We assume that LIC_FILES_CHKSUM is a file: URI but don't actually verify this,
which can lead to problems if you have a URI that resolves to a path of / as
Bitbake will then dutifully checksum / recursively.
[ YOCTO #12883 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want to preserve sparse files when building the system, add the option
to tar to ensure we do this when copying files.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If multilib scripts handle more than one file per package, the variable
ALTERNATIVE_${PN} will be overwritten and there will be only one symbol
link file. Append to the variable to avoid this.
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The devtool-source class moves all local files specified in SRC_URI to
an oe-local-files directory. When using devtool and a recipe space kernel-meta,
devtool modify throws an error because the paths the kernel-yocto class
is looking for feature directories in, don't include the oe-local-files
directory which devtool is using.
This patch checks for feature directories in oe-local-files,
and if present, adds that path to include directives.
[YOCTO #12855]
Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using a recipe space kernel-meta, scc files are added through
SRC_URI, but they may include corresponding kernel fragments or patches
that are not necessarily in SRC_URI.
For bitbake, this is not a problem because the kernel-yocto class adds
the path where the .scc file was found to includes which consequentially
makes the .cfg, .patch file available to the kernel build.
However, when using devtool, only files specified in SRC_URI are copied
to oe-local-files in devtool's workspace. So if the cfg/patch file is not in
SRC_URI, it won't be copied, causing a kernel build failure when trying
to find it.
This fix parses local .scc files in SRC_URI, copies the corresponding
.cfg/.patch file to devtool's workdir, and also adds it to local_files
so it is available when doing a devtool build for the kernel.
[YOCTO #12858]
v2: also supporting patch not in SRC_URI
v3: fix spacing issues
Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace the generic whitelist entry with entries for the three specific
'problem' cases in OE-Core. This means the general DEPLOY_DIR_IMAGE entry
doesn't mask problems for others as was recently encoutered by users
reported on irc. In the whitelisted cases they occur only in multilib builds
and the files are identical.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the user has no indication of how much sstate was already present
or that would be used by the build. This change adds some summary information
so that the user can see how much reuse is occurring. To fully work it
needs some extra information from a recent bitbake commit but this is
optional.
When combined with bitbake --dry-run this feature can be used to check
if sstate would be reused in a build.
[YOCTO #12749]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace usage of oe.utils.getstatusoutput() with direct subprocess
calls.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Using os.path.getmtime() will dereference symbolic links in an attempt
to get the last modified time. This can cause errors if the target
doesn't exist, or worse map to some absolute build host path which would
make a build not reproducible.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This bbclass implements the device tree compilation for user provided
device trees. In order to use this class, it should be inherited in a
BSP recipe which provides the sources. The default setup enables
inclusion of kernel device tree sources (though can be disabled by the
recipe by overriding DT_INCLUDE or KERNEL_INCLUDE).
This provides an additional mechanism for BSPs to provide device trees
and device tree overlays for their target machines. Whilst still
enabling access to the kernel device trees for base SoC includes and
headers.
This approach to providing device trees has benefits for certain use
cases over patching the device trees into the kernel source.
* device trees are separated from kernel source, allows for selection of
kernel and or kernel versions without needing to explicitly patch the
kernel (or appending to the kernel recipes).
* providing device trees from separate sources, from the layer,
generated by the recipe or other recipes.
This class also implements some additional features that are not
available in the kernel-devicetree flow. This includes population of
device tree blobs into the sysroot which allows for other recipes to
consume built dtbs (e.g. U-Boot with EXT_DTB compilation), device tree
overlay compilation and customizing DTC compilation args (boot
cpu/padding/etc.).
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Acked-by: Martin Hundebøll <mnhu@prevas.dk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's useful for the SDK to know exactly what TARGET_ARCH and TARGET_OS are,
specifically for SDK QA.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
CMake, in it's infinite wisdom, when searching for libraries (using
find_library) will look inside the libraries PREFIX/lib, PREFIX/lib32, and
PREFIX/lib64. In a multilib SDK more than one of these will exist (potentially
all three) and obviously for a given build configuration only one of those is
valid. This search path is hard-coded deep inside CMake but by setting
CMAKE_FIND_LIBRARY_CUSTOM_LIB_SUFFIX we can bypass it and set an explicit
lib<SUFFIX> to use.
Do this by writing ${baselib} into the environment file, and then stripping
"lib" from this to obtain the suffix in the cmake-specific environment script,
which is then read in the CMake toolchain.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Instead of both classes using ${PYTHON_PN} (which is set by python-dir and
python3-dir), hardcode the right values so that it is possible to inherit both
pythonnative and python3native at the same time.
If both are inherited then both native Pythons are available, but the last to be
inherited will be the one to set PYTHON.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the configure fails then we don't really want to see hundreds of lines of
test output (this would be similar to dumping out autoconf's config.log). The
error includes the path of the full log if further debugging is required.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch enables multiconfig dependencies (mcdepends) to be used on
recipes using the following format:
task[mcdepends] = "multiconfig:FROM-MC:TO-MC:PN:task-to-depend-on"
For the sake of simplicity consider the following example:
Assuming we have set up multiconfig builds, one for qemux86 and one for
qemuarm, named x86 and arm respectively.
Adding the following line to an image recipe (core-image-sato):
do_image[mcdepends] = "multiconfig:x86:arm:core-image-minimal:do_rootfs"
Would state that core-image-sato:do_image from x86 will depend on
core-image-minimal:do_rootfs from arm so it can be executed.
This patch makes modifications to bitbake.conf to enable mcdepends, and
to sstatesig and staging.bbclass to avoid conflicts between packages from
different multiconfigs.
[YOCTO #10681]
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recent changes broke the preservation of hardlinks during processing due to a missing index.
Fix this, reducing the size of the git recipe packages in particular (it contains many hardlinks).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Whilst the package managers handle multilib ELF binaries well, they don't
handle scripts in the *bindir directories well. This adds support for
marking these up so that they can be handled using update-alternatives.
Its done this way so that non-multilib systems don't see any changes and
there is standardisation amongst the multilibs on how the alternatives are
named and prioritiesd. The priotitisation code needs to be added but this
change means there is somewhere to add it.
Recipe needs to set MULTILIB_SCRIPTS in the form <pkgname>:<scriptname>, e.g.
MULTILIB_SCRIPTS = "${PN}-dev:${bindir}/file1 ${PN}:${base_bindir}/file2"
to indicate which script files to process from which packages.
libtool is used a as a reference to stop the libtool scripts conflicting
in a multilib case and allows the kernel-devsrc change to be merged.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For distutils3, any setup.py invoking will cause setup_requires
argument to trigger a code fetching. Since the following commit
applied in oe-core, code fetching occurs during do_confugire
before the do_compile.
...
b805cef distutils: clean the build tree in do_configure
...
Refer what do_compile did, add var-NO_FETCH_BUILD to do_configure.
Sync with distutils3, add do_configure to distutils also.
[YOCTO #12084]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The testtools or subunit is not part of python's standard library, so check them
before use.
Fixed when they are not installed on host:
$ bitbake core-image-minimal -ctestsdk
Exception: ImportError: No module named 'testtools'
Now it can run with a warning:
WARNING: core-image-minimal-1.0-r0 do_testsdk: Failed to import testtools or subunit, the testcases will run serially
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
of setting them
* this allows to work around some of the issues with file-rdeps
* e.g. in my case I have /usr/lib/libmali.so.0.1 which according to rpmdeps
provides only following libmali*
libmali.so(LIBMALI_1.0)
libmali.so.0.1
but many users of this link with libmali.so directly and according to
rpmdeps require libmali.so which causes file-rdeps for a lot of
recipes
* I was using simple work around to just set:
RPROVIDES_${PN} = "libmali.so libGLESv2.so libEGL.so"
but that doesn't work well with multilib, because the value gets
expanded with MLPREFIX and
RPROVIDES_${PN} = "lib32-libmali.so lib32-libGLESv2.so lib32-libEGL.so"
doesn't help at all.
[YOCTO #9217] Many unsolveable QA warnings from build-deps and file-rdeps
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The variable is PACKAGE_WRITE_DEPS as seen in the default below the
comment.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Leaving -Wcross out of the bbnote version of the autoreconf command
seems to be a long standing inconsistency (dating back to the very
first commit in oe-core) but there's no obvious reason to do so.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
|
|
- Unify var-DISTUTILS_INSTALL_ARGS in distutils and setuptools
- Supply "--root" directory to the "install" command, and use
it as a prefix to strip off the purported filename encoded
in bytecode files. (It strips build path prefix from .pyc files)
[YOCTO #8446]
[YOCTO #12084]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
fetch code during do_compile
If a python recipe is using setuptools and the setup_requires argument, where
setuptools will use easy_install to fetch the module if it isn't
present.
The build failed on a machine where a proxy was required, but succeeded on a
machine which had direct access to the internet
Add var-NO_FETCH_BUILD, and set it in distutils_do_compile which does not
allow to fetch code from internet during do_compile.
Example result:
...
ERROR: Do not try to fetch `pytest-runner1' for building. Please add its native recipe to DEPENDS.
Traceback (most recent call last):
File "setup.py", line 56, in <module>
...
The improvement is flexible for test_requirements argument (used at
`setup.py test'), where use easy_install also.
[YOCTO #12084]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The current code pokes into do_deploy manifests from do_image_complete when the
do_image_complete task may or may not depend upon the do_deploy tasks in question.
Often it gets lucky, sometimes it results in build failures.
To fix this, split the functionality to its own task which can have the correct
task dependencies. This means the data in BB_TASKDEPDATA is definitive, the other
code can be dropped, as can the IMAGE_EXTRATYPES do_populate_lic dependencies
from image.bbclass.
This fixes bugs which show up as:
NOTE: recipe linux-yocto-4.14.48+gitAUTOINC+d64aec9793_97c8063d2d-r0: task do_deploy: Started
ERROR: core-image-minimal-1.0-r0 do_image_complete: Error executing a python function in exec_python_func() autogenerated:
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:write_deploy_manifest(d)
0003:
File: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/classes/license.bbclass', lineno: 33, function: write_deploy_manifest
0029: 'w+').write(output)
0030:}
0031:
0032:python write_deploy_manifest() {
*** 0033: license_deployed_manifest(d)
0034:}
0035:
0036:python license_create_manifest() {
0037: import oe.packagedata
File: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/classes/license.bbclass', lineno: 191, function: license_deployed_manifest
0187: # It is necessary to mark this will be used for image manifest
0188: man_dic[dep]["IMAGE_MANIFEST"] = True
0189: man_dic[dep]["PN"] = dep
0190: man_dic[dep]["FILES"] = \
*** 0191: " ".join(get_deployed_files(dep_dic[dep]))
0192: with open(os.path.join(lic_dir, dep, "recipeinfo"), "r") as f:
0193: for line in f.readlines():
0194: key,val = line.split(": ", 1)
0195: man_dic[dep][key] = val[:-1]
File: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/classes/license.bbclass', lineno: 289, function: get_deployed_files
0285: """
0286:
0287: dep_files = []
0288: excluded_files = []
*** 0289: with open(man_file, "r") as manifest:
0290: all_files = manifest.read()
0291: for f in all_files.splitlines():
0292: if ((not (os.path.islink(f) or os.path.isdir(f))) and
0293: not os.path.basename(f) in excluded_files):
Exception: FileNotFoundError: [Errno 2] No such file or directory: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build-st-730/tmp/sstate-control/manifest-qemux86_64-linux-yocto.deploy'
ERROR: core-image-minimal-1.0-r0 do_image_complete: Function failed: write_deploy_manifest
ERROR: Logfile of failure stored in: /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build-st-730/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/temp/log.do_image_complete.50537
NOTE: recipe core-image-minimal-1.0-r0: task do_image_complete: Failed
ERROR: Task (/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/recipes-core/images/core-image-minimal.bb:do_image_complete) failed with exit code '1'
NOTE: recipe linux-yocto-4.14.48+gitAUTOINC+d64aec9793_97c8063d2d-r0: task do_deploy: Succeeded
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This means the image code is only included in image recipes through
the IMAGE_CLASSES variable.
This sets things up to allow us to fix image deploy dependency problems.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Using 'sub' in one function just confuses things, standardise and fix
formatting of the parameters too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This reverts commit 6671a4d980c8bef8f402780a308f6c43a25044aa.
This breaks uninative tarball since the call of relocate_sdk.py from uninative.bbclass
wasn't updated to account for this change. It isn't clear what value that code could
pass in and this isn't simple to fix so revert until a better fix can be found
that doesn't break uninative.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
After this replacement, the parent exception handling works so we don't
need subprocess wrapping with bb.error in the underlying functions.
The underlying contexts also have better module handling so the imports
can be cleaned up.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace usage of oe.utils.getstatusoutput() with direct subprocess calls. The
call is just a wraper to the subprocess call of the same name and requires
the caller to handle exceptions themselves. We usually do this badly, failing
to show the output or the command or the return code.
Its much safer to rely on a call like subprocess.check_output() instead.
This also makes it easier to spot and remove cases where shell=True isn't
needed in a later cleanup.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the compression of sstate objects is single threaded. In the case
of ltp, this takes around 33s. If we add pigz into the list of non-fatal
HOSTTOOLS and then use if it available when building the sstate object,
this time drops to around 6s.
Since pigz is now widely available this is an optimisation we should
utilise.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This allows the calls to is_elf (which calls file) to happen in parallel
allowing a speedup of do_package and do_populate_sysroot for native
recipes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are probably further cleanups needed here but this at least removes
the major code duplication between these two similar funcitons, keeping the
kernel module ".ko" extension check for efficiency to avoid opening and
reading file contents in the general case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This function is a bit more invasive to add parallelism to but
allows the shlibs analysis to happen in multiple threads. In order
to return values correctly/safely the data types needed tweaking
to avoid lists and use immutable objects.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adjust the code so that the splitting of debug symbols from files happens
in parallel. To to this we need to move some path handling code into the
main function and pass more parameters in.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Khem Raj
Christopher Larson
Richard Purdie
André Draszik
Konstantin Shemyak
Alex Kiernan
Rasmus Villemoes
Ross Burton
Zhixiong Chi
Jaewon Lee
Joshua Watt
Nathan Rossi
Alejandro Enedino Hernandez Samaniego
Hongxu Jia
Robert Yang
Martin Jansa
Paul Eggleton
Andre McCurdy