Age | Commit message (Collapse) | Author |
|
When in configured mode the archive will re-run configure itself, but that
doesn't work if there are other tasks that need to run such as cmake's
generate_toolchain_file.
Instead of hard-coding a list of classes and tasks, obtain the list of tasks
preceeding do_configure, filter out ones we don't want to re-run such as
do_patch and do_prepare_recipe_sysroot, and run those too.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some recipes don't have do_configure, or have them but are marked as noexec.
Check for their existance before hooking up dependencies.
[ YOCTO #12868 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It doesn't make much sense to expand them to multilib, and there is an error on
qemuarm64 since grub-efi supports arm64, but doesn't support armv7a or armv7ve:
* Fixed:
MACHINE = "qemuarm64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "armv7a"
MACHINE_FEATURES_append = " efi"
$ bitbake lib32-core-image-minimal
Also introduced a variable NON_MULTILIB_RECIPES in multilib.conf, so that we
can easily add other recipes, such as syslinux if needed.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
fltk.bb inherit mime.bbclass, mime.bbclass add RDEPEND during
populate_package, so need add mlprefix manually.
ERROR: QA Issue: lib32-fltk package lib32-fltk-dev - suspicious
values 'shared-mime-info-data-dev' in RRECOMMENDS [multilib]
ERROR: QA Issue: lib32-fltk package lib32-fltk-bin - suspicious
values 'shared-mime-info-data' in RDEPENDS [multilib]
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
lib32-packagegroup-anaconda-support have RDEPENDS to kernel-image,
but kernel-image don't have lib32, so skip it.
ERROR: QA Issue: lib32-packagegroup-anaconda-support package
lib32-packagegroup-anaconda-support - suspicious values 'kernel-image'
in RDEPENDS [multilib]
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If "scc --configs" fails, do_kernel_configcheck() crashes like this:
0338: try:
0339: configs = subprocess.check_output(['scc', '--configs', '-o', s + '/.kernel-meta'], env=env).decode('utf-8')
0340: except subprocess.CalledProcessError:
*** 0341: bb.fatal( "Cannot gather config fragments for audit: %s" % configs)
0342:
0343: try:
0344: subprocess.check_call(['kconf_check', '--report', '-o',
0345: '%s/%s/cfg' % (s, kmeta), d.getVar('B') + '/.config', s, configs], cwd=s, env=env)
Exception: UnboundLocalError: local variable 'configs' referenced before assignment
This crash bug was introduced by commit
21de5cc43cfedc703e5bc0515507a6dae36afb74
Signed-off-by: Max Kellermann <max.kellermann@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For now, the RECIPE_SYSROOT of nativesdk recipes is ${WORKDIR}/recipe-sysroot
if multilib is disabled and ${WORKDIR}/nativesdk-recipe-sysroot if multilib
is enabled. And it's causing chaos. Problems I've met include:
1) 'File Exists' error when doing extend_recipe_sysroot
2) Rebuilding failure about cmake based nativesdk recipes if toggling multilib
In nativesdk.bbclass, We've set MULTILIBS to be "", and we've changed MLPREFIX
to be 'nativesdk-', I think we should also set consistent RECIPE_SYSROOT to be
${WORKDIR}/recipe-sysroot.
Below is an example showing why previous settings will cause do_prepare_recipe_sysroot
failure.
e.g.
A -> C
B -> C
A's RECIPE_SYSROOT is .../recipe-sysroot and B's RECIPE_SYSROOT is
.../nativesdk-recipe-sysroot.
As extend_recipe_sysroot function uses shared manifest, i.e., the same
manifest of C for both A and B, then there must be one of them having
the wrong manifest. And the wrong manifest results in RECIPE_SYSROOT
not cleaned up before installing new components, thus the following error.
Exception: FileExistsError: [Errno 17] File exists: xxx -> xxx
This happens when toggling multilib and also between nativesdk recipes and
crosssdk, cross-canadian recipes. The latter situation also explains
why choosing ${WORKDIR}/recipe-sysroot instead of ${WORKDIR}/nativesdk-recipe-sysroot.
If we use 'nativesdk-recipe-sysroot', we still need to modify the extend_recipe_sysroot
function to treat crosssdk and cross-canadian as special cases. Using
'recipe-sysroot' does not have this problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a function siteinfo_data_for_machine to look up the data for any arch/os
pair, not just HOST_ARCH-HOST_OS.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the goal of autoconf-compatibility Meson respects $CFLAGS et al in builds.
In cross-compiled build the cross file is the one true source of flags and the
environment isn't used, but in a native build the environment will still be
respected.
As this can lead to target flags being used in the build for native binaries
(including a single native binary inside a target recipe), export
CFLAGS=${BUILD_CFLAGS) et al.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Meson doesn't care for the value of the endian field, but packages may want to
use it and Meson master now validates the value.
Use siteinfo to obtain the endianism and write the correct value.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During deploy we iterate over KERNEL_IMAGETYPES twice, with no consumer
of our changes in the interim. Collapse these two loops into one.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When usrmerge is enabled the kernel modules aren't under /lib, but /usr/lib;
ensure we fetch the modules from the correct location so we don't have a
tarball which consists of a single symlink.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When deploying the its file, the target of the symlink is missing the its
extension, add it here.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
that."
This reverts commit 65cded55fa96b1ba72149a31689c081ac27af7f7.
The fitImage deployed here is the one generated in kernel-fitimage.bbclass,
whereas the one deployed by kernel-fitimage.bbclass is a raw image, so we
need the one deployed here keeping.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
u-boot-mkimage-native is needed to build any type of uImages, be it
the uImage target itself or for example uImage.lzma. The dependency
however gets only added when at least one of KERNEL_IMAGETYPE and
KERNEL_ALT_IMAGETYPE is exactly uImage. Building uImage.bin and uImage.lzma is
not possible this way.
This patch adds a dependency to u-boot-mkimage-native for all imagetypes which
contains the string uImage.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add the basic architecture site info targets for the LatticeMico32
architecture. This architecture does not target Linux.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The Clutter class's ability to switch between tarballs and git isn't really
useful, so remove it. If it comes back, it should use the devupstream class.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
For non-python developers it's difficult to identify where start
searching in case of errors. Fixing and marking the string to
grep for might help finding some root causes of issues slightly
quicker.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Log both the source of the source_date_epoch and the resulting
source_date_epoch in all cases.
Also, now that we are determining the source_date_epoch successfully for both
yocto and non-yocto kernels, remove the inherits_class('kernel') exception.
We will log a failure to find a source_date_epoch for kernels as well.
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Unnecessary.
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Change the search regime for find_git_folder():
1. WORKDIR/git: This is the default git fetcher unpack path
2. ${S}
3. Go looking for .git/ under the WORKDIR as a last resort.
linux-yocto:
We had an existing (silent) defect. The linux-yocto recipes all specify
two git SRC_URIs, one for the kernel source itself, the other for the
kmeta data (config fragments and friends). find_git_folder() was finding
the git checkout for the kmeta data, but due to a typo in the git log -1
--pretty=%ct line, we were (silently) reading the source_date_epoch from
the ${S} directory = STAGING_KERNEL_DIR, which is empty. If your
build/ happened to be inside a git checkout, git would walk up the
directory tree, and silently read the commit timestamp from this other
git checkout. The correct path to read the git commit timestamp from is
the "gitpath", being that found by find_git_folder(), though this
function was incorrectly finding the kmeta data checkout, not the kernel
source tree.
Non-kernel git recipes:
The default git fetcher clones and checks out the sources at
WORKDIR/git/ regardless of the setting of S (unless subpath or
destsuffix is set). find_git_folder() now looks for the
WORKDIR/git/.git/ directory first.
Non-yocto linux kernels:
Kernel recipes that don't inherit kernel-yocto should always set
S = ${WORKDIR}/git, so that when base_do_unpack_append() in
kernel.bbclass moves the checkout down to the STAGING_KERNEL_DIR and
symlinks it as WORKDIR/git, the build can still work by following the
symlink. We were previously failing to follow the symlink in the
os.walk(), but we now look first for WORKDIR/git/.git/, and find it due
to the symlink.
If none of the above mechanisms work for finding the git checkout,
perhaps there was a subpath or destsuffix specified in the SRC_URI.
We go looking for the git checkout under the WORKDIR as a last resort.
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Tidy whitespace, delete commented-out lines
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
this makes it possible to use this for musl where we are trying to
create a glibc compat package
Add missing aarch64 loader definition for glibc function
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
BPF Linux ELF objects are generated with kernel-selftests with
>= 4.18 kernel and when clang is enabled which packages BPF objects
into packages, therefore recongnise this as a valid ELF target
Add a selftest for BPF
Do not flag BPF objects in target, since they pretty much will be ok for
most of kernels architectures we care do support BPF
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The rprovides of target-sdk-provides-dummy don't be updated with
multilib, so it fails package_qa_multilib check. Because
target-sdk-provides-dummy doesn't install any file to sysroot, it is
safe to skip package_qa_multilib check for target-sdk-provides-dummy.
Remove ${MLPREFIX}target-sdk-provides-dummy from TOOLCHAIN_TARGET_TASK
at same time in populate_sdk_base.bbclass.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update SSTATE_DUPWHITELIST in sstate.bbclass.
* remove ${DEPLOY_DIR_RPM}/noarch/ which is not overwritten any more
* add directories for package target-sdk-provides-dummy
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some allarch packages rdepends non-allarch packages. when multilib is
used, it doesn't expand the dependency chain correctly, e.g.
core-image-sato -> ca-certificates(allarch) -> openssl
we expect dependency chain for lib32-core-image-sato:
lib32-core-image-sato -> ca-certificates(allarch) -> lib32-openssl
it should install lib32-openssl for ca-certificates but openssl is still
wrongly required.
Only enable allarch when multilib is not used to fix the issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
kernel-fitimage.bbclass replaces an occurance of "fitImage" in
KERNEL_IMAGETYPE_FOR_MAKE by an image type that is buildable for the
architecture (such as zImage). The kernel-fitimage.bbclass packs that
image as sub-image in a flattened image tree image (fitImage) and
deploys this fitImage along with the image tree source file (.its).
kernel-fitimage.bbclass does not alter KERNEL_IMAGETYPES, which thus
also contains "fitImage", which kernel.bbclass will also deploy
redundantly with different naming.
The result is a dual deployment with slightly different naming,
each with a set of symlinks.
The solution chosen is to have fitImage deployment be handled by
kernel-fitimage.bbclass, and have kernel.bbclass ignore fitImage
types during deployment.
Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default the devicetree class adds padding to the generated .dtb
files, which can be needed by the bootloader. However it also pads
.dtbo files, which is not useful.
Don't apply padding to the overlay devicetrees.
To achieve this:
* move "-p ${DT_PADDING_SIZE}" to a new variable, DTB_BFLAGS (B for
"base")
* add "-p 0" to DTC_OFLAGS to disable padding for overlays
Cc: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
QEMU_USE_KVM can either be a boolean or a whitespace separated list
of kvm supported machines.
For the 'intel-corei7-64' machine, defined in meta-intel, kvm could not be
used as the 'x86' substring is not part of its machine name.
By changing the order of this 'or' statement and setting
the 'QEMU_USE_KVM' variable to 'intel-corei7-64', it is possible to run the
'testimage' task with kvm support successfully.
Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code currently only prints a single depchain due to overwriting data
instead of appending. Fix this.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Occasionally we see warnings like:
WARNING: core-image-sato-1.0-r0 do_populate_sdk: Manifest /home/pokybuild/yocto-worker/nightly-qa-extras/build/build/tmp/sstate-control/manifest-allarch-nativesdk-linux-libc-headers.populate_sysroot not found in i686_linux allarch (variant '')?
which occur when do_populate_sdk is run in an otherwise empty TMPDIR.
It occurs because do_stash_locale is not recognised as a setscene task
and is removed from the taskgraph meaning the dependency chains fed
through setscene_depvalid don't match what was actually setscene'd.
That task is recipe specific and not in the global SSTATETASKS so we
hardcode the value for now to stop the build warnings. This is going to
need to be revisited for a more generic solution.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Running 'gcc --version' for every image recipe is slow and increases parsing
time/resource usage for no good reason. Only compute the value in when we're
really running the task/function.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
All other functions in this class use TAB for indentation while
the do_compile function uses '4 spaces'. Adjust it for consistency.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
git.gnome.org is no more. It has ceased to be. It's an ex-git.
Please see here:
https://about.gitlab.com/2018/05/31/welcome-gnome-to-gitlab/
Note that gitlab does not support git://, only https:// (and ssh).
[Commit message from Alexander Kanavin]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's possible that the perms conf file specified by FILESYSTEM_PERMS_TABLES
does not exist. Currently, this situation is silently ignored, which
is likely to lead to further do_rootfs failures.
So fix to output a warning, telling user that the specified file
in FILESYSTEM_PERMS_TABLES cannot be found.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It was otherwise being deferred until boot time
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is inspired from
https://github.com/python/cpython/blob/master/configure.ac
Helps cross compiling python C modules in some cases where they do
not respect normal CFLAGS
Errors like using gcc to link when compiler is clang is fixed
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Extract a general version of RPATH fix for libxml-parser-perl_2.44.bb
from
292471701 libxml-parser-perl: fix "...contains bad RPATH"
into cpan.bbclass to catch most errors reported by Khem Raj via
http://errors.yoctoproject.org/Errors/Build/66538/
Genrally, Perl 5 toolchain deals with cross-compile sysroots
as if a dependency is installed at an exostic place on a server.
This issue needs to be addressed wider into the community.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During the re-working of kernel fragments and status output cleanup the
visibility for BSP level errors was dropped/removed.
The audit phase can detect errors, redefinition and invalid
configuration fragments. We control the visibility of these reports via
the existing KCONF_BSP_AUDIT_LEVEL variable.
By default, errors and invalid configuration values will be displayed as
a warning. If redefinition values are to be shown the audit level must
be raised above the deafult value of '2'. We inhibit these by default,
since there are many valid reasons why a BSP will change a default /
base config .. and showing them offers no value to the BSP user.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replace usage of os.utils.getstatusoutput() with direct subprocess
calls. Pass a modified environment and working directory where necessary
to bypass the need to execute in a shell.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Define variable SSTATE_PRUNE_OBSOLETEWORKDIR with '?=' in sstate.bbclass,
then it could be overwritten by user configuration.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The devshell.bbclass set var-SHELL to var-DEVSHELL, and terminal.bbclass
initial var-SHELL with `bash'. Keep sync with it, use var-SHELL rather
than hardcoded `/bin/sh' as the shebang of wrapper script.
On Ubuntu host, default shell is dash (/bin/sh -> dash), even though
we assign var-SHELL with `/bin/bash', the wrapper script is still dashism.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
directory
While multiple hardlinks of binary located in different dirs,
there are also multiple hardlinks of separated debug info file
with the same binary name in same debug dirs. But in each dir,
only one debug file with original name works. Because all of
binary hardlinks have one `.gnu_debuglink' which is added in
`splitdebuginfo'. It caused gdb could not find debugging
symbols.
[Before the patch]
$ find .
./usr/bin/foo
./usr/bin/foo-hd1
./usr/bin/.debug
./usr/bin/.debug/foo
./usr/bin/.debug/foo-hd1
./usr/libexec/foo-hd2
./usr/libexec/.debug
./usr/libexec/.debug/foo-hd2
$ readelf --debug-dump usr/libexec/foo-hd2
Contents of the .gnu_debuglink section:
Separate debug info file: foo
$ gdb usr/libexec/foo-hd2
Reading symbols from usr/libexec/foo-hd2...(no debugging symbols found)...done.
[Before the patch]
[Apply the patch]
$ find .
./usr/bin/foo
./usr/bin/foo-hd1
./usr/bin/.debug
./usr/bin/.debug/foo
./usr/libexec/foo-hd2
./usr/libexec/.debug
./usr/libexec/.debug/foo
$ gdb usr/libexec/foo-hd2
Reading symbols from usr/libexec/foo-hd2...Reading symbols from usr/libexec/.debug/foo...done.
[Apply the patch]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The following statement was accidently removed. Add it back.
values['ml'] = ['']
This patch fixes the following error.
Exception: KeyError: 'ml'
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|