| Age | Commit message (Collapse) | Author |
|---|
|
Previously 4.3.2.1 would match as 3.2.1.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The current class works fine when a recipe uses SYSTEMD_AUTO_ENABLE
'enable' and has no on device pkg_postinst(), ie when the postinst is
run as part of rootfs creation. However, when there is a component of
pkg_postinst() that is run on device the 'systemctl restart' is run as
part of the run_postinsts.service at boot. This results in the boot
spinning indefinitely with:
[ *** ] A start job is running for Run pending postinsts (7s / no limit)
The issue could potentially be that the packages service has an
'After' clause which comes later in the boot, beyond
run_postinsts.service, creating a chicken before the egg
scenario. Even service files without an 'After' clause cause this
situation however. Despite this not being the cause of the issue this
fix will prevent this scenario from happenning.
Using strace we are able to find that during boot, when
run_postinsts.service is running attempting to start or restart any
service will result in the call get stuck on poll(). Since the
run_postinsts.service does not monitor the outcome of the call to
restart we can work around this by using '--no-block'.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Writing qemuboot.conf in write_qemuboot_conf() does not modify the
rootfs and thus conceptually shouldn't be executed as part of rootfs
creation.
Running it as separate task is cleaner and fixes the problem of
missing qemuboot.conf files for meta-swupd virtual images; those
images replace do_rootfs and ROOTFS_POSTPROCESS_COMMANDs don't run at
all.
The task gets added such that it runs roughly at the same time as
before. Probably it doesn't actually need to depend on do_rootfs, but
this way we don't write a useless qemuboot.conf in cases where
do_rootfs fails.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of being executed for every file in every package, this is now just
called for each package. It is also now correctly called for packages which
don't have any content but do have postinst scripts.
[ YOCTO #10711 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
QAPATHTEST defines a function that is executed for every file in every package.
For tests which just need to look at the datastore this is massive overkill.
Add QAPKGTEST, which is invoked for each package in the recipe.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Pull the test matrix processing out as a function so it can be reused.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This test should be looking for the expanded value of ${D} in the expanded value
of pkg_postinst and so on, but one of the getVar() calls was passing
expand=False so the test would never be true.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add mappings for aarch64-elf and aarch64_be-elf to binary lookup table
which allows for the generation of baremetal toolchains.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
gnome-common is deprecated upstream and an increasingly smaller fraction of
GNOME packages still use it. To avoid adding it redundantly to DEPENDS, remove
it from the class.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The change to move C++ ABI tweaks to bitbake.conf should make this redundant, so
revert it.
This reverts commit c56cd49a12645e82d0a16bb94be16ac509f8813c.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Create a common include file for compiler flags which allow native binaries to
be interoperable on a wide range of hosts. In particular the C++ ABI is
problematic so choose the CXX11 version to allow interoperation between gcc4 and
gcc5 based hosts. Moving this to a common include instead of uninative.bbclass
allows uninative to be configured later and used in the eSDK (where its
mandatory) even if the base configuration doesn't enable uninative by default
(e.g. nodistro in OE-Core).
[ YOCTO #10645 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
All lines except one (the one containing the 'Elapsed Time') follows the format
'stat: value'. Fix that so post parsing the stats is simpler.
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When attempting to run devshell, if no terminal is available, the
error being thrown was not very specific. This adds a list of
commands that failed, informing the user of what they can install to
fix the error.
[ YOCTO #10472]
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The old code:
network_enabled = not d.getVar('BB_NO_NETWORK', True)
It is True only when BB_NO_NETWORK is not set (None),
but BB_NO_NETWORK = "0" should also be True while "1" means no network,
"0" means need network in a normal case.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This can help fix the problem when the error happens.
Now the error message is:
Fetcher failure for URL: 'https://www.example.com/'. URL https://www.example.com/ doesn't work.
Please ensure your host's network is configured correctly,
or set BB_NO_NETWORK = "1" to disable network access if
all required sources are on local disk.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This is helpful when debug.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The TOOLCHAINEXT_OUTPUTNAME is different from TOOLCHAIN_OUTPUTNAME, it
is used for eSDK only, so that it doesn't mix with SDK, use "?=" for it
so that other conf file can define it.
If we don't use "?=" here, then we need use forcevariable to redfine it:
TOOLCHAINEXT_OUTPUTNAME_forcevariable = "foo"
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It is possible to use gzip or bzip2 to compress patches and still refer
to them in compressed form in the SRC_URI value within a recipe. If you
run "devtool modify" on such a recipe, make changes to the commit for
the patch and then run devtool update-recipe, we need to correctly
associate the commit back to the compressed patch file and re-compress
the patch, neither of which we were doing previously.
Additionally, add an oe-selftest test to ensure this doesn't regress in
future.
Fixes [YOCTO #8278].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We strip the TOOLCHAIN_OPTIONS and HOST_CC_ARCH from CC/CXX in cmake.bbclass
whereas CFLAFS and CXXFLAGS assume that TOOLCHAIN_OPTIONS are
part of CC/CXX variables, this causes compile failures when cmake
is running compiler tests during configure on some architectures
especially armhf, because hf ABI information -mfloat-abi is part
of TOOLCHAIN_OPTIONS, so what happens is that testcase gets compiled
without hard-float, howver, during linking the float ABI option
is passed via LDFLAGS, now linker rejects this and fails like
/mnt/a/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: error: cmTC_27947 uses VFP register arguments, CMakeFiles/cmTC_27947.dir/src.cxx.o does not
mnt/a/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: failed to merge target specific data of file CMakeFiles/cmTC_27947.dir/src.cxx.o
collect2: error: ld returned 1 exit status
This means that CMake now fails the configure time test too
which is not right, e.g. it might disable features which actually do exist
and should be enabled e.g. in case above it is resulting as below
Performing C++ SOURCE FILE Test HAS_BUILTIN_SYNC_SUB_AND_FETCH failed with the following output:
Its actually a bug in CMake see
https://gitlab.kitware.com/cmake/cmake/issues/16421
CMake is ignoring CMAKE_CXX_FLAGS when using CHECK_CXX_SOURCE_COMPILES
function.
Until it is fixed upstream, we add HOST_CC_ARCH and TOOLCHAIN_OPTIONS
to CFLAGS and CXXFLAGS, so that we can ensure that compiler invocation
remains consistent.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When a systemd service file has changed it is required to reload
systemd's configuration. Otherwise changes to a service file will not be
picked up during package upgrade.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The bb.data API is deprecated, use d.getVar instead.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixes a crash in exception handler. All bb logging functions need an
string instances as arguments.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Fixed when nativesdk-unfs3 is installed:
$ bitbake <image> -c populate_sdk_ext
| Traceback (most recent call last):
| File "/path/to/oe-core/scripts/lnr", line 21, in <module>
| os.symlink(target, linkname)
| FileExistsError: [Errno 17] File exists: '../../../../tmp/sysroots/x86_64-linux/usr/bin/unfsd' -> '/path/to/9.0/sysroots/x86_64-wrlinuxsdk-linux/usr/bin/unfsd'
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Contrary to the CVE report, the vulnerable trace functions
don't exist in readline v5.2 (which we keep for GPLv2+
purposes), they were added in readline v6.0 only - let's
whitelist that CVE in order to avoid false positives.
See also the discussion in
https://patchwork.openembedded.org/patch/81765/
Signed-off-by: André Draszik <adraszik@tycoint.com>
Reviewed-by: Lukasz Nowak <lnowak@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When staging changes in a layer using git add, image-buildinfo
doesn't detect this as a modification, because of the way it
uses git diff.
Surely, merely staging, but not committing changes to git
should not result in image-buildhistory assuming that the
git repository hasn't been modified compared to the branch
HEAD, this state should be treated similarly to modifications
being unstaged.
We have to use both, git diff and git diff --cached to get the
desired result.
Signed-off-by: André Draszik <adraszik@tycoint.com>
Reported-by: Lukasz Nowak <lnowak@tycoint.com>
Reviewed-by: Lukasz Nowak <lnowak@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
api-documentation is in DISTRO_FEATURES
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Previously do_populate_lic would bail writing the license files (such as the MIT
license text) to deploy/licenses/${PN}/ if there were no files listed in
LIC_FILES_CHKSUM. In general this isn't a problem since LIC_FILES_CHKSUM was
effectively a required field, and for packages which don't have traditional
content was generally set to a separate license such as
${COREBASE}/meta/COPYING.MIT.
However LIC_FILES_CHKSUM is now only required if there are sources in SRC_URI,
so oe-core b18fa5f removed these now redundant values. The unexpected side
effect of this is that that recipes that generate their content (such as
os-release) or are otherwise "interesting" (such as perf) don't have their
license files copied over, resulting in warnings from do_rootfs.
Resolve this by not returning early if LIC_FILES_CHKSUM is empty, and always
copy the references license files.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
It seems that possibly due to OE-Core commit
ac59063bee0e32d0737340974f657341717a6abe, binaries produced without
uninative aren't compatible with the uninative glibc. I did try earlier
to ensure that the eSDK could work without uninative since the default
configuration in OE-Core does not enable it, but it seems like I didn't
go far enough. Given the practical considerations, just give up and
require uninative to be enabled in order to build the eSDK. I'm not
particularly happy about this, but I don't seem much of an alternative.
Fixes [YOCTO #10566].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you are using a repository which contains a .templateconf file that
sets TEMPLATECONF to point into a layer it contains, but you aren't
using that layer in your bblayers.conf, the eSDK would produce an error
during the preparation step of the installation. An example would be
using the poky repository but setting DISTRO to your own custom distro
and removing meta-poky from your bblayers.conf. The eSDK doesn't
support creating new build directories, so we don't care about the
templates and can thus force a known good value to prevent this from
happening.
Fixes [YOCTO #10568].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The class clearly intends build tools to depend upon the dummy texinfo, but it
does so using the class-cross override for cross recipes, and libtool-cross
doesn't inherit cross. Add a special case to cover this.
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Make it clear that SDK testing can use any valid image.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
open() is default to 'rt' which may cause decoding errors when open
binary file:
$ bitbake xcursor-transparent-theme
[snip]
Exception: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xfd in position 18: invalid start byte
[snip]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
SDK_OLDEST_KERNEL currently only controls the check on SDK installation,
however as with OLDEST_KERNEL it should be controlling the OLDEST_KERNEL
value for building glibc used in the SDK. Thus, set it in
nativesdk.bbclass. This means we need to move the default to
bitbake.conf so that it can be seen in both places.
Also set a more reasonable default for SDK_OLDEST_KERNEL for x86/x86-64 as
glibc 2.24 still supports back to 2.6.32 there and there are still
people wanting to build SDKs that will install on older distros (e.g.
CentOS 6). However it's not possible to set this with overrides since
there aren't any for the SDK_ARCH, however we can instead set the variable
from conf files in conf/machine-sdk especially as there is now a soft
default for SDKMACHINE.
Fixes [YOCTO #10561].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you used an & character in SDK_TITLE (possibly indirectly from
DISTRO_NAME) then sed interpreted this as a directive to paste in the
replaced string (@SDK_TITLE@ in this case). Escape any & characters in
SDK_TITLE to avoid that.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Now that out of tree building is enabled, ${B} must be used instead of
${S} as the path for UBOOT_BINARY.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Setting up the vardeps on write_qemuboot_conf forces the updating of
variables in qemuboot.conf when machine/deploy configuration changes.
This is particularly useful when developing or setting up the qemuboot
(e.g. changing QB_* variables) for new targets or when changing
deployment variables (e.g. KERNEL_IMAGETYPE).
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Using "npm install" instead of "cp -a" is the more correct thing to be
doing here, and ensures that symlinks for executable scripts are put
into ${prefix}/bin. (I'd prefer ${bindir}, but npm does not allow
specifying paths at that level - only a prefix.)
Fixes [YOCTO #10460].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
If you set LIC_FILES_CHKSUM to point to a relative symlink then you'll
get "Could not copy license file" warnings in copy_license_files() since
the symlink won't be valid after it's copied. If the source is a symlink
then we need to dereference it first.
I encountered this when I used recipetool on the sources for capnproto,
where the c++ directory contains a LICENSE.txt symlink to the LICENSE
file in the parent directory, and this symlink ends up being pointed to
in LIC_FILES_CHKSUM.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
We don't remove sigdata files, we also shouldn't remove sigbasedata files
as this hinders debugging.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't remove sigdata files, we also shouldn't remove sigbasedata files
as this hinders debugging.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The change to get rid of FuncFailed exceptions changed the behavior
of how missing uid/gid error are be handled. Instead of catching
the exception and handling that via bb.parse.SkipPackage(), a fatal
error was called.
This won't work with recipes that are unused and therefore do not have
UID/GIDs defined. The problem triggers when parsing all recipes (e.g.,
oe-selftest runs bitbake -p).
The right way to handle this is to raise bb.parse.SkipPackage(). This
will error correctly once the recipe is needed.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This class enables 'manpages' feature in packages if 'api-documentation'
is in distro features. This ensures that manpages are always built
and installed when API documentation feature is enabled.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Changed to use lz4 as lz4c seems to be deprecated.
Removed use of redirection in favor of using output file.
As Linux kernel supports only legacy format for initial ramdisk add
COMPRESS_CMD_lz4_legacy mode in case some users are using newer format.
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
buildhistory was writing srcrevs.values() as SRCREV when only one
srcrev/branch exists. This returns a view of the dictionary values in python
3, and used to return a list in python 2, neither of which is an appropriate
value for SRCREV. It was resulting in latest_srcrev files like this:
# SRCREV = "346584bf6e38232be8773c24fd7dedcbd7b3d9ed"
SRCREV = "dict_values(['346584bf6e38232be8773c24fd7dedcbd7b3d9ed'])"
Which in turn would result in invalid output in buildhistory-collect-srcrevs.
Fix by calling `next(iter())` on the `.values()`
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
This will allow for more flexibility and overrides in BSP
layers.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
After 0d6b7276003f1afabc6de683f663540327d52bdc, the exceptions are
correctly checked if the rootfs size check fails. In case of a
failure a build error is triggered.
However, there are cases where this is known to fail (e.g.,
with meta-swupd the rootfs for swupd images is other than IMAGE_ROOTFS).
Because of that, check IMAGE_ROOTFS exists before trying to get the
size of it. Also, in case of any error catched as err, simply print
out a warning.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed:
MACHINE = "qemumips64"
DEFAULTTUNE = "mips64-o32"
$ bitbake linux-yocto
ERROR: linux-yocto-4.8+gitAUTOINC+03bf3dd731_674818dad5-r0 do_package_qa: QA Issue: Bit size did not match (32 to 64) linux-yocto on
/work/qemumips64-poky-linux/linux-yocto/4.8+gitAUTOINC+03bf3dd731_674818dad5-r0/packages-split/kernel-module-parport/lib/modules/4.8.0-yocto-standard/kernel/drivers/parport/parport.ko [arch]
The mips64-n32 works since it would set ABIEXTENSION to "n32" so that
TARGET_OS is linux-gnun32, and it will skip the check, but "mips64-o32"
doesn't set ABIEXTENSION to "o32", "n32" or "32", so the error happend.
Skip the check if mips64.*32 matches DEFAULTTUNE can fix the problem.
Another way to fix the problem is define ABIEXTENSION to "o32" or "32"
for mips64-o32, but that may make things confused since "o32" is purely
32 bit.
[YOCTO #10305]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The eSDK generation assumes that DL_DIR is downloads/ under the build directory,
and puts files such as a freshly buily uninative tarball in there expecting
bitbake will find it later.
Whilst ${TOPDIR}/downloads/ is in fact the default value for DL_DIR in
bitbake.conf, and any instances of DL_DIR are removed from the original
local.conf, there is still the possibility that other layers could contain a
site.conf that assigns DL_DIR.
If this happens the errors are quite mysterious as it fails to find the
uninative tarball and so the hashes all change, and eSDK building fails.
Ensure that this cannot happen by explicitly assigning the DL_DIR that we
require, instead of assuming that the default value will be used.
[ YOCTO #10439 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
Alexander Kanavin
Mark Asselstine
Patrick Ohly
Ross Burton
Alexandre Belloni
Leonardo Sandoval
Stephano Cetola
Robert Yang
Paul Eggleton
Khem Raj
Linus Wallgren
Richard Purdie
Markus Lehtonen
André Draszik
Christopher Larson
Robert P. J. Day
George McCollister
Nathan Rossi
Mikko Ylinen
Vesa Jääskeläinen
Saul Wold