| Age | Commit message (Collapse) | Author |
|---|
|
Map SDK_ARCH x86_64 to DEB_SDK_ARCH amd64
Without this patch meta-toolchain-gmae fails to do_populate_sdk
| The following packages have unmet dependencies:
| nativesdk-packagegroup-sdk-host : Depends: nativesdk-autoconf but it
is not installable
| Depends: nativesdk-libtool but it
is not installable
| Depends: nativesdk-shadow but it is
not installable
| Depends: nativesdk-unfs-server but
it is not installable
| Depends: nativesdk-makedevs but it
is not installable
| Depends: nativesdk-automake but it
is not installable
| Depends: nativesdk-qemu but it is
not installable
| Depends: nativesdk-pkgconfig but it
is not installable
| Depends: nativesdk-pseudo but it is
not installable
| Depends: nativesdk-qemu-helper but
it is not installable
| Depends: nativesdk-opkg but it is
not installable
| packagegroup-cross-canadian-qt5022 : Depends:
gdb-cross-canadian-x86-64 but it is not installable
| Depends:
binutils-cross-canadian-x86-64 but it is not installable
| Depends:
gcc-cross-canadian-x86-64 but it is not installable
| Depends: meta-environment-qt5022
but it is not installable
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're using the python routines now.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Call the new python routines.
[YOCTO #5904]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adds a gummiboot class similar to grub-efi class and makes the necessary
changes so it can be used for live/hddimg images as well.
One can set EFI_PROVIDER = "gummiboot" in local.conf to use gummiboot instead of grub-efi.
Gummiboot requires some kernel options that are not enabled by default, so one has to build
with KERNEL_FEATURES_append = " cfg/efi-ext".
The install scripts have been updated too, keeping the old behaviour around,
but accounting for the new boot loader config files (if they exist).
It can be argued that the installer and bootimg are a bit wierd and not necessarily correct,
but I wanted to have the exact same behviour with gummiboot.
With the default EFI_PROVIDER = "grub-efi" nothing changes, everthing should be just as before.
I've tested live boot, install and normal boot on:
- FRI2
- genericx86-64 on NUC
with:
EFI_PROVIDER = "gummiboot"
KERNEL_FEATURES_append = " cfg/efi-ext"
in local.conf.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Abstract away some names so one can select using EFI_PROVIDER a different
class than grub-efi for populating live images, basically allowing the use
of a different bootloader than grub-efi.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was stomping over the value added in buildhistory.bbclass, leading
to task signatures *still* changing when buildhistory was added to
INHERIT.
Fixes [YOCTO #5897].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The dependency to CCACHE_DIR was moved to ccache.bbclass in
commit 2acf8da4f13c175ea818b9514677b7059de1e3e2:
[ ccache: Separate out into its own class ]
then the '=' should be replaced by '+=', otherwise, it will overwrite
the original ${CCACHE_DIR} in dirs.
Signen-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The ptest is useful in context of deployment to the target hence
we don't need ptest for nativesdk and cross-canadian packages
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without this patch packages are generated as x86_64. Which cannot be
installed by default.
root@qt5022:~# dpkg -i alsa-utils_1.0.27.2-r0_x86-64.deb
dpkg: error processing alsa-utils_1.0.27.2-r0_x86-64.deb (--install):
package architecture (x86-64) does not match system (amd64)
Errors were encountered while processing:
alsa-utils_1.0.27.2-r0_x86-64.deb
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The doc varflag on UBOOT_CONFIG should be ignored by this code; without
this the recent addition of the UBOOT_CONFIG[doc] to documentation.conf
causes errors when UBOOT_MACHINE is used.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A bit uncertain on where to put this, suggestions welcome.
Needed to automatically rebuild do_rootfs when PACKAGE_FEED_URIS
change.
Signed-off-by: David Nyström <david.c.nystrom@gmail.com>
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The Kernel module packages for x32 target have 64 bit binaries, which
breaks the QA_check expecting all the packages to be 32bit.
Make a special case for kernel module packages for x32 targets, to avoid
this false error.
Fixes Bug:
[YOCTO #5903]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
|
|
Add a sanity test that checks for symlinks in packages that point into the
TMPDIR on the host.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Fix task signatures for recipes that add to SSTATEPOSTINSTFUNCS changing
when adding and removing INHERIT += "buildhistory" (really this time!)
This relies on the BitBake vardepvalueexclude feature, however it will
not fail without it - signatures will be changed in that case though.
Part of the fix for [YOCTO #5897].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
We used populate-extfs.sh which invoked the debugfs to create the image,
now the mke2fs' option "-d root-directory" can do the same thing, and
which is more faster, for example, the core-imag-sato:
* In the past:
$ time mke2fs -t ext4 rootfs.ext4
real 0m0.249s
user 0m0.036s
sys 0m0.132s
$ time populate-extfs.sh /path/to/rootfs/ rootfs.ext4
real 0m29.355s
user 0m10.637s
sys 0m5.544s
* Now:
$ time mkfs.ext4 -F -d /path/to/rootfs/ rootfs.ext4
real 0m6.338s
user 0m3.824s
sys 0m1.356s
More than 25 seconds are saved.
[YOCTO #4083]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bbclass did the following:
do_diffconfig[depends] += "virtual/kernel:do_kernel_configme"
This clearly introduces a cross-kernel task dependency if the recipe
inheriting this class isn't the preferred provider of virtual/kernel, which is
obviously wrong, but further, will break the build if a kernel-yocto based
kernel is parsed and not skipped, but virtual/kernel refers to
a non-kernel-yocto recipe, which would not have the do_kernel_configme task.
Work around this by adding the in-recipe task dep programmatically with
bb.build.addtask when do_diffconfig exists.
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
'git branch' may use ANSI escape codes in its output (to provide colour)
which doesn't play well with commands expecting pure plain text, e.g.
fatal: '^[[31mmaster^[[m' is not a valid branch name.
Use the --no-color option to ensure all branch names are plain text.
Cc: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since tasks were renamed to packagegroups some time ago, this variable
name implies that its usage is necessarily related to them which is not
the case. Rename the variable to more closely represent what it does
(whilst still providing backwards-compatibility with a warning for
PACKAGE_GROUP).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Previously the "package-management" feature was only fully supported
when inheriting core-image.bbclass, which is not really ideal given that
this is the standard way of adding runtime packaging to an image in
OE-Core.
Part of the fix for [YOCTO #5424].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* it's useful to know by how much we need to bump PR in original recipe to preserve upgrade path
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The PRINC logic is now deprecated, the PR server should be used to handle
the automatic incrementing of the PR (package release) field. Add a warning
message to alert users to the change. The functionality will be removed
in the next release cycle.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With this change, you can use shell like globbing expressions (as
supported by Python's fnmatch) for entries in SANITY_TESTED_DISTROS.
This makes it possible to say that, e.g. "all Debian 7 Wheezy releases
are supported" with the entry "Debian-7.*".
[YOCTO #5265]
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Bitbake can't interpret the python execution of these functions so
include the dependency manually.
[YOCTO #4507]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes to BAD_RECOMMENDATIONS or NO_RECOMMENDATIONS require the rootfs
for the image to be rebuilt.
[YOCTO #5898]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
For machines other than qemu it will not be okay to run
multiple testimage tasks in parallel.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
AUTOTOOLS_COPYACLOCAL variable
Introduce a AUTOTOOLS_COPYACLOCAL variable which forces the copy of the aclocal
files even when a configure.ac/.in file isn't present.
Use this new feature in alsa-tools.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We still occasionally see race issues with cp-noerror, and it copies
too many files, we should limit the the m4 files to those explicitly in
the DEPENDS for the recipe.
This change takes advantage of the BB_TASKDEPDATA data from bitbake to
only copy in those files listed in the manifest of the recipes in DEPENDS.
I've had this testing locally for some time, its ready for wider
review/testing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch goes through the OE-Core recipes and marks those which use autotools
but don't support a separate build directory (${S} != ${B}). A new class,
autotools-brokensep is used for this purpose.
This doesn't introduce any change in behaviour in its own right.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The validate_branches routine is responsible for ensuring that the specified
SRCREV exists, and that the tree has been prepared for eventual patching
starting directly from that SRCREV.
On exit, the routine checks out the specified machine branch and the
preparation is complete .. except if a KMETA branch isn't used, we exit
early since the branch can't be validated.
To make the exit condition consistent for all cases, we can move the
KMETA validation inside a conditional and allow the same exit path for
both cases.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The ValidError case makes parsing fail even if the U-Boot variant is
not in use for the specific machine and this is not desired. So
instead of raising a parsing error we skip the package.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
I was asked why we had these copy and update_data calls. I can
offer no good explanation other than them perhaps once being needed
for reasons long since forgotten and superceeded.
With modern bitbake these should not be needed and shouldn't have been
for a long time. Lets therefore remove them and simplify the code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
I have a feeling this code exists from the time before we had proper
coverage of one sstate task by another task. At that time it was a
"poor" persons version of that idea, we now have much better
code internal to bitbake which handles this.
Worse, this code actually breaks certain rebuild scenarios,
e.g.:
bitbake libtool-cross
bitbake libtool-cross -c cleansstate
rm tmp -rf
bitbake libtool-cross
would fail as binutils-cross wasn't installed from sstate.
The easiest fix is to remove the obsolete/broken code.
[YOCTO #5773]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The reasons this task was introduced are lost in the mists of time. It
allowed for the a single "package_write" task instead of spelling out
the explicit package backends, however in all but one case we do that
anyway.
As such as might as well give in and delete the task, converting that
single reference into explicit dependencies.
This gives bitbake a bit less work to to when processing the runqueue
since there are less tasks (but more dependencies in some cases).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Sort the list so it's at least in some form of logical order. I looked
at sorting by dependencies, but that's a topological sort, and given
no such function is shipped as part of the python standard libraries
it would seem excessive to pull one in just for this. In any case, I'm
not sure that for the data we have this would lead to any particularly
pleasing result.
* Show the doc values as defined in documentation.conf (where present)
as a description
Addresses [YOCTO #4856].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Avoid tar noticing that the directory is changing when
do_package_write_deb or do_package_write_ipk are running at the same
time as do_package_write_tar (because DEBIAN and CONTROL are being added
and removed while tar is running so the directory changes).
Fixes [YOCTO #5652]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code here that deletes stamps was also deleting the taint files; so
forcing an sstate task with -f would force it to execute and then
because the taint file was deleted in the process, the next execution
would simply restore the output from sstate again. We need to exclude
the taint files just like we did in bb.build.make_stamp().
Fixes [YOCTO #5805].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The working directory is changed in a subshell when executing cpio to
preserve the working directory for any subsequent commands. This is to
keep the working directory consistent when generating multiple image
types.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In update-rc.d.bbclass it checks variable INHIBIT_UPDATERCD_BBCLASS to
inhibit from inheriting this class. But it is wrong logic that when
'sysvinit' is in 'DISTRO_FEATURES', INHIBIT_UPDATERCD_BBCLASS will not
be checked.
Replace 'or' with 'and' to fix it.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Don't force SYSLINUX_TIMEOUT and SYSLINUX_PROMPT if overrides have
been defined elsewhere for an image configuration.
Signed-off-by: Kyle Russell <bkylerussell@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The list_installed_packages bash routine is no longer needed here. We've
got a python replacement.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Call the new python routines to create the packages list.
[YOCTO #5831]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The following dependencies were manually added in the image creation
code. However, in order to have an image dependency mechanism in place,
use a new variable, IMAGE_TYPEDEP, to declare that an image type depends
on another being already created.
The following dependencies are added by this commit:
elf -> cpio.gz
live -> ext3
vmdk -> ext3
iso -> ext3
hddimg -> ext3
This commit adds also another new variable: IMAGE_TYPES_MASKED. Currently,
masking out certain types from IMAGE_FSTYPES was hardcoded in the image
creation code.
[YOCTO #5830]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Since generic compression solution has been introduced
(see revision b7e4ed41ee480f00b7265341e9e2d2c2b9135143),
CPIO_TOUCH_INIT() is only called by IMAGE_CMD_cpio.
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
diffconfig() is a new task that makes a diff between the
old and new config files and writes to the fragment.cfg result file.
menuconfig() always copy the original config file, so the user
doesn't need to copy it.
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Instead of using 'diff' command between two kernel config files,
the task diffconfig does the job creating the file
$WORKDIR/fragment.cfg that user should review and use.
[YOCTO #3862]
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
below commit
commit 9d9bca8785911e8ae06d507bbfb99d6a811f072e
Author: Jonathan Liu <net147@gmail.com>
Date: Mon Feb 17 21:46:28 2014 +1100
lib/oe/image.py: fix working directory
The working directory needs to be changed before the image creation
commands instead of afterwards.
exposed an issue when generating tar images, where it would cd into
rootfs and then create the rootfs tarball and remain there since the
cmd to cd into deploy dir moved up the immediate following cmd like
tar.bz2 or tar.gz were still looking for tarball in current directory
which esentially was not deploy dir but IMAGE_ROOTFS instead
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
License formatting and address for FSF in the COPYING and COPYING.LIB
has changed.
Dropped patched already upstream and patches that were workarounds for
older glibc and busybox
for e500 we have should pass --without-fp to eglibc/glibc 2.19 onwards
the code is merged from eglibc into glibc upstream under nofpu/ pretext
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
We don't need to depend on do_package anymore after the split out of
do_packagedata (which happened a while back in OE-Core commit
6107ee294afde395e39d084c33e8e94013c625a9). We do need dependencies on
do_packagedata though since the SDK construction needs to make use of
the pkgdata files.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
do_rootfs has ${S} in cleandirs, and during do_populate_sdk we call
exec_func() several times, which by default uses ${B} as the working
directory. If do_populate_sysroot and do_rootfs race against eachother,
the directory may not exist at the exact instant that the setup code
for do_populate_sdk tries to cd into it. We don't actually use ${B}
for do_populate_sysroot so we can set it to something else just for that
task to avoid the race.
NOTE: because this task name contains an underscore, the override will
not work; the BitBake patch that changes these to hyphens for the
task override is required for this patch to work (but won't break things
without it.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
So far, when do_split_packages is passed a non-existing folder, it will return nothing.
While building Mesa with PACKAGECONFIG="egl gles" for qemux86, do_package threw a nice exception on a line reading "pkgs += do_split_packages":
"Exception: TypeError: 'NoneType' object is not iterable"
I think a function should always return something, and in this specific case, returning an empty list should be right.
This patch simply fixes the return statement to do just that.
Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
Ricardo Ribalda Delgado
Laurentiu Palcu
Stefan Stanacar
Paul Eggleton
Ming Liu
Tudor Florea
David Nyström
Nitin A Kamble
Ross Burton
Robert Yang
Christopher Larson
Matt Fleming
Martin Jansa
Richard Purdie
Olof Johansson
Jonathan Liu
Bruce Ashfield
Otavio Salvador
Kai Kang
Kyle Russell
Matthieu Crapet
João Henrique Ferreira de Freitas
Khem Raj
Josua Mayer