| Age | Commit message (Collapse) | Author |
|---|
|
Currently if B==S for a cmake recipe, the build will not reconfigure. This patch adds
code to remove the generated cmake files, meaning cmake will then be forced to regenerate
them. This forces cmake to see configuration changes it may not otherwise see.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When something rebuilds say due to ${baselib} changing or some
other key variable, software is often not rebuilt due to the
fact that make detects no dependency change.
By running "make clean" when these changes occur, we can at least try
and ensure the correct rebuilds happen. We use the same checksum check as
autotools to decide if things have changed or not.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the build doesn't support B != S, we can try running "make clean" instead
to try and clean up previous objects if the hash for the task has changed.
This tries to ensure that when variables like ${baselib} change, the changes are
correctly accounted for.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Additionally treat ld.so to be searched in sysroot
Change-Id: I8b4acb821d9855a1163c7149bc8e369c7c438856
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Commands like bitbake X -c rootfs or bitbake X -c populate_sdk do not
trigger rm_work to clean up the directories afterwards since it
traditionally hooks onto do_build. This change means those two tasks now
clean up after themselves. We use the cleandirs function attribute to
handle this.
[YOCTO #6413]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The simplication of do_validate_branches missed a case where a custom
kernel can supply SRCREV="${AUTOREV}", and not use SRCREV_machine at all.
In this case, we will incorrectly try and test the tree for a non-existent
commit, and break the build.
By simplying the condition of the check to look for an empty SRCREV_machine,
we can skip manipulating the tree and testing for a SRCREV.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Instead of replicating the logic for the host compiler naming from bitbake.conf,
use the BUILD_* variables directly.
Also change BUILD_CPP to use gcc -E (which native.bbclass previously used), as
some recipes (e.g. grub-efi) use ${CPP} with multiple input files, which gcc -E
can handle but cpp can't.
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
During kernel_do_install it needs to make symbol link at
${D}/lib/modules/${KERNEL_VERSION}/build, but there will not be
${D}/lib/modules/${KERNEL_VERSION} if there is no modules installed for current
image, which will result in a build failure.
Add "mkdir -p ${D}/lib/modules/${KERNEL_VERSION}" here to avoid this failure
and the need of similar changes in other scripts that also expect it to exist.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
In trying to eliminate AUTOINC+ from revision strings,
we accidently truncated the strings to almost guarantee
information from SRCREV_FORMAT, when supplied, would be
lost. So, we now only delete any AUTOINC+'s from the string.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
reflected in licenses.conf.
The previous version could crash on dead links in the rootfs, or if the manifest directory did not
exist. The generated files were also not compliant with the SPDX specification, for example file
entries did not always start with the FileName tag, time stamps were incorrectly formatted etc.
Stability issues are addressed by added checks, originally written by Johan Thelin
<johan.thelin@pelagicore.com>, who never upstreamed them. I've also added an option for getting full
SPDX output from FOSSology, i.e. not only for all files, but for the package as well, including
license references. License refs are required in order to process the output by SPDXTools. For that
reason, this option defaults to true.
Signed-off-by: Tobias Olausson <tobias.olausson@pelagicore.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Commit e9672387 split one long line into a multi-line string, but in
the process white space between words was lost. This results in badly
formatted output when this message is printed.
Signed-off-by: Peter Urbanec <openembedded-devel@urbanec.net>
|
|
For some recipes that inhrient cmake, the ${B} may be removed by
cmake_do_configure() while sstate_hardcode_path() running, this
causes build errors:
Exception: OSError: [Errno 2] No such file or directory: \
'/path/to/build'
The function sstate_hardcode_path() called command:
$SSTATE_SCAN_CMD which extended as "find ${SSTATE_BUILDDIR} ..."
So the proper function dirs could be ${SSTATE_BUILDDIR}.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Trying to upgrade busybox removing symlinks but update-alternatives
need these links (sed, cut, tail, etc) in order to work.
Adding test to avoid this scripts on upgrade fix the problem, same
solution are found in package_rpm class.
[YOCTO #6768]
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
dictionary
shlib2 code puts the information about path where a provider
will be found. e.g.
{'/usr/lib/llvm3.3': ('libllvm3.3-llvm-3.3', '3.3')}
This is obtained from new shlib2 pkgdata from
llvm3.3/3.3-r0/pkgdata/shlibs2/libllvm3.3-llvm-3.3.list
However when we search for NEEDED libraries we ignore the
key above which is the path where the provider library is installed
and instead just seach in libdir and base_libdir and hence
libraries which are not in above standard search paths gets
ignored even if they appear in DT_NEEDED sections
and a note is emitted
NOTE: Couldn't find shared library provider for libLLVM-3.3.so, used by
files: ....
IMO this note should actually become an error since if we do
not have all DT_NEEDED libraries in image the system is dysfunctional.
This patch extracts this libpath from key and add it to seach paths
when looing for a provider of a shared library
[YOCTO #6798]
Change-Id: Ie5f08632e37ba8d3439c8aaae33bc68b8996792f
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In a similar way to the previous script which adds support for native
environment scripts, this adds support for target environment scripts
too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The too long line would cause "git send-email" report errors:
patch contains a line longer than 998 characters
Though we can use "--no-validate" to force the send.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
The code:
bb.fatal("foo1")
bb.fatal("foo2")
Would make the second one not work, use bb.error for first one to fix
the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
|
|
Sometimes we require extra environment settings to be available on the
environment for proper SDK work. This were done, in past, using
'_append' tasks however with the split of the environment in a
canadian package this has been broken.
The easier and more flexible solution is to use environment subscripts
which are sources by the main script. These are now looked at:
$OECORE_NATIVE_SYSROOT/environment-setup.d/*.sh
and sourced.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The SRC_URI may contain whitespace, but be otherwise empty. This can happen
in the case:
MYSRC = ""
MYSRC_arm = "file://myarm.patch"
SRC_URI += "${MYSRC}"
Unless we strip blank spaces, to determine if it is empty, we can end up
generating a "Source: " line which in invalid. This leads to the error:
invalid Source: field is speified in the generated CONTROL file
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In case a package is not generated (is empty and does not has allow
empty flag set) the package data regarding reverse runtime dependency
shouldn't be done.
This were causing a false-positive in the meta-fsl-arm layer, when
building mesa, as:
,----[ Error during build of MX53 in meta-fsl-arm ]
| ERROR: The recipe mesa is trying to install files into a shared area
| when those files already exist. Those files and their manifest
| location are:
| /.../build/build/tmp/sysroots/imx53qsb/pkgdata/runtime-reverse/libopenvg-dev
| Matched in manifest-imx53qsb-amd-gpu-x11-bin-mx51.packagedata
| Please verify which recipe should provide the above files.
`----
Fixes [YOCTO: #6795]
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Similarly to native/cross disable this since otherwise the packagedata
can be marked as machine specific and if you switch machines
which share an architecture, you'll get toolchain overlapping files
errors.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Even though the kernel-dev package provides the required support for
building external kernel modules on the target, some commonly used scripts
and utilities fail as they are not finding the kernel module build support
files at the desired location.
Create the /lib/modules/<kernel-version>/build link on target pointing to
the sources provided by the kernel-dev package, to fix the issue.
Fixes Bug:
[YOCTO #2968]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The makefile checks for bc during for compilation
[YOCTO #6781]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The packagegroup allarch rpm files for multilib can overwrite each other since
they are in theory indentical (in contrast to the other backends). We therefore
need to whitelist this to avoid build failures now this overwrite failure
is fatal.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add SPDX-specific source tree variable for recipes where $S is a subdirectory of
the source tree.
[ RB - add a comment for SPDX_S ]
Signed-off-by: leimaohui <leimaohui@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
A warning is issued when run about an unexpected operator due to a
syntax error with an extra if empedded in the shell conditional. Remove
the extra if.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Without this changing just the SRCREV won't re-fetch unless you embed the SRCREV
into PV.
The downside here is that every hash changes, so this causes a full rebuild.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If you switch between multilib and non-multilib builds, pretty much
everything rebuilds due to the use of MULTI_PROVIDER_WHITELIST
in do_populate_sysroot. It doesn't need to do this so exclude
that variable for checksum purposes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Update the sstate file's timestamps after it is installed, it will be
very useful for removing the old sstate file, especially, it's not easy
to remove when use the shared SSTATE_DIR, we can easily remove them with
this change, for example:
$ find state-cache -type f -ctime +10 -exec rm -f {} \;
Will remove the sstate file which isn't used by recent 10 days.
We can use the -atime, but it is not always available, for example,
when mounted with "-o noatime".
The touch is a very light weight action, and the
scripts/sstate-cache-management.sh also requires this.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When files overlap in the sysroot, something bad usually happened. We've had
two independent cases recently where a couple of months after one of these
warnings was shown, builds failed due to corruption.
This change moves the warning to become a fatal error. The complaint I've had
about this is that we need to tell the user what happened and more importantly
how to recover from it. If we could recover from it, great but the trouble is
we simply don't know what happened.
As a compromise, we can document several of the possible scenarios in the error
message. We don't normally go to this level of detail however in this case, I'm
lacking other viable alternatives.
I do believe it is important to stop as corruption occurs rather than letting the
build contunue into territory that is not deterministic amongst other things.
The complex message is followed by a simpler one in case the long message is too
much for the user.
(From OE-Core rev: 179ac7de03977b6e440409eddb2166819e07286a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Taking run-postinsts and building for two machines which have different
OVERRIDES leads to two different sets of stamps for an allarch package.
We don't need to depend on OVERRIDES in these classes, the end resulting
variables are good enough. We can therefore exclude the dependency
and allow a single package to be generated for run-postinsts.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These patches are the start of a new idea, a way of allowing a single set of
cross/native sstate to work over mutliple distros, even old ones.
The assumption is that our own C library is basically up to date. We build
and share a small tarball (~2MB) of a prebuilt copy of this along with a
patchelf binary (which sadly is C++ based so libstdc++ is in there). This
tarball can be generated from our usual SDK generation process through
the supplied recipe, uninative-tarball.
At the start of the build, if its not been extracted into the sysroot, this
tarball is extracted there and configured for the specified path.
When we install binaries from a "uninative" sstate feed, we change the
dynamic loader to point at this dynamic loader and C librbary. This works
exactly the same way as our relocatable SDK does. The only real difference
is a switch to use patchelf, so even if the interpreter section is too small,
it can still adjust the binary.
Right now this implements a working proof of concept. If you build the tarball
and place it at the head of the tree (in COREBASE), you can run a build from
sstate and successfully build packages and construct images.
There is some improvement needed, its hardcoded for x86_64 right now, its trivial
to add 32 bit support too. The tarball isn't fetched right now, there is just a
harcoded path assumption and there is no error handling. I haven't figured
out the best delivery mechanism for that yet. BuildStarted is probably not
the right event to hook on either.
I've merged this to illustrate how with a small change, we might make the
native/cross sstate much more reusable and hence improve the accessibility
of lower overhead builds. With this change, its possible the Yocto Project may
be able to support a configured sstate mirror out the box. This also has
positive implications for our developer workflow/SDK improvements.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
|
|
Currently we have the horrible situation where meta-environment packages
the toolchain environment files and they get included in the SDK but are
broken, then, the SDK code overwrites them with good versions. This is
suboptimal.
This change fixes the code in meta-environment to create working
files and adds in the multilib support from populate_sdk_base, then
we remove the code in that base bbclass and rely on the packages
being installed if/as/when needed. This removes the duplication
and the broken versions of the files, hopefully making all well.
[YOCTO #6608]
[YOCTO #6613]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
UHD and GNU radio use the cmake build system. The toolchain file made
from cmake.bbclass does not set the variable needs by cmake projects
that use .S files. UHD added some .S files and these changes are required
to build recent UHD.
Signed-off-by: Philip Balister <philip@balister.org>
|
|
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
|
|
I've been giving things some thought, specifically why sstate doesn't
get used more and why we have people requesting external toolchains. I'm
guessing the issue is that people don't like how often sstate can change
and the lack of an easy way to lock it down.
Locking it down is actually quite easy so patch implements some basics
of how you can do this (for example to a specific toolchain). With an
addition like this to local.conf (or wherever):
SIGGEN_LOCKEDSIGS = "\
gcc-cross:do_populate_sysroot:a8d91b35b98e1494957a2ddaf4598956 \
eglibc:do_populate_sysroot:13e8c68553dc61f9d67564f13b9b2d67 \
eglibc:do_packagedata:bfca0db1782c719d373f8636282596ee \
gcc-cross:do_packagedata:4b601ff4f67601395ee49c46701122f6 \
"
the code at the end of the email will force the hashes to those values
for the recipes mentioned. The system would then find and use those
specific objects from the sstate cache instead of trying to build
anything.
Obviously this is a little simplistic, you might need to put an override
against this to only apply those revisions for a specific architecture
for example. You'd also probably want to put code in the sstate hash
validation code to ensure it really did install these from sstate since
if it didn't you'd want to abort the build.
This patch also implements support to add to bitbake -S which dumps the
locked sstate checksums for each task into a ready prepared include file
locked-sigs.inc (currently placed into cwd). There is a function,
bb.parse.siggen.dump_lockedsigs() which can be called to trigger the
same functionality from task space.
A warning is added to sstate.bbclass through a call back into the siggen
class to warn if objects are not used from the locked cache. The
SIGGEN_ENFORCE_LOCKEDSIGS variable controls whether this is just a warning
or a fatal error.
A script is provided to generate sstate directory from a locked-sigs file.
(From OE-Core rev: 7e14784f2493a19c6bfe3ec3f05a5cf9797a2f22)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The "grep -e (x|y)" doesn't work, for example:
$ echo xy | grep -e '(x|y)'
No output
We can use "grep -E" (extended regexp) or "grep -e x -e y" to fix it.
It only affected the cross recipes.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Currently copies of the license files are made which wastes disk space
and adversely affects performance. We can link these instead in most
cases for small performance gains.
(From OE-Core rev: 0b0f3631fd22f731b6aeedb73965e367b695028b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The use of [ and && here means $? is reset and the exit 1 error
interception wasn't working, leading to "file changed as we read it"
errors from sstate_create_package when heavily using hardlinks.
Fix this by placing $? into a variable.
(From OE-Core rev: 6e51f900b76b06c09a3d6927f8db7398e2c035ed)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add an SDK_POST_INSTALL_COMMAND variable which allows additional
commands to be added towards the end of the SDK install script, for e.g.
additional processing that needs to be done as part of installing the
SDK.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the PACKAGE_ARCH is dependant of a override, the expanding is
done too late triggering the false-positive error of wrong inclusion
order.
To fix this we use immediate expansion operator to evaluate the
PACKAGE_ARCH value in order to choose to load 'allarch' class or not.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
A few firmware files use this filename extension, like korg/k1212.dsp .
Create respective packages.
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
SSTATEPOSTINSTFUNCS is now set with = in sstate.bbclass, and because
the line here in buildhistory.bbclass ends up being parsed before that
we now need to use _append or the value we are adding will be wiped out.
This fixes buildhistory no longer recording package information since
OE-Core revision 9d659c6f20fa4a141b491c62a3ef0dfb1f896d9c.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* in some cases (e.g. with external toolchain which doesn't respect our
reasonably old version set in OLDEST_KERNEL) it's possible to have libc
which requires newer kernel than what we have on builders, qemu supports
-r param to use different uname than what's returned by host system.
* change qemu_run_binary to pass -r ${OLDEST_KERNEL} and add the same to
QEMU_OPTIONS which are used by qemuwrapper-cross
* maybe we should eventually convert all qemu_run_binary usages always include
qemuwrapper-cross dependency and always call qemu through that (it
seems very strange that qemu_target_binary is called from qemuwrapper
and for allarch recipes it can return qemu-allarch as qemu binary).
qemu_run_binary is used by:
meta/classes/gtk-immodules-cache.bbclass: ${@qemu_run_binary(d, '$D', '${bindir}/gtk-query-immodules-$maj_ver.0')} \
meta/classes/qemu.bbclass:def qemu_run_binary(data, rootfs_path, binary):
meta/recipes-core/systemd/systemd_213.bb: ${@qemu_run_binary(d, '$D', '${base_bindir}/udevadm')} hwdb --update \
meta/recipes-graphics/pango/pango.inc: ${@qemu_run_binary(d, '$D','${bindir}/${MLPREFIX}pango-querymodules')} \
and qemuwrapper directly by:
scripts/postinst-intercepts/update_font_cache:PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D/${libdir}:$D/${base_libdir}\
scripts/postinst-intercepts/update_pixbuf_cache:PSEUDO_UNLOAD=1 qemuwrapper -L $D -E LD_LIBRARY_PATH=$D/${libdir}:$D/${base_libdir}\
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In some cases we do either need to add extra sstate manipulation
functions, or change the existing modification functions. This patch
parametrizes it to SSTATEPOSTCREATEFUNCS after sstate_create_package
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The ipk or deb can't depend on file such as "/bin/bash" or
"/usr/bin/perl", so it knows nothing about the pkg depends bash or perl,
thus there would be dependencies problems when we run "apt-get
install/remove <pkg>" on the target, this check can help us find the
issues and then fix them manually.
* Benefits:
- Help to fix file rdepends issues for ipk and deb
- Help to fix abnormal rdepends.
- Help to check whether the rdepends is OK or not after build each
recipe (don't have to install to the image), for example, a recipe may
generate 10 binary packages, only a part of them will be installed to
the image by default, we can know whether the rdepends are OK or
not for the ones which are installed, but can't know the ones which
are not installed, this patch can help check all the 10 binary
packages' rdepends.
* Basic designs:
- Get all the RDEPENDS on the chain.
- Get the pkg's FILERPROVIDES from oe.packagedata.read_subpkgdata()
and save to set filerdepends.
- Get each RPDEPENDS' FILERPROVIDES, RPROVIDES and FILERPROVIDESFLIST,
and save to set rdep_rprovides.
- Do the set "filerdepends -= rdep_rprovides" and QA issue if
filerdepends is not null.
[YOCTO #1662]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When using the useradd-staticids.bbclass under meta/classes,
this error occurs:
"<username> - <username>: Username does not have a static uid defined."
There was a problem with the regular expression for parsing parameters,
it was sometimes returning an empty string.
I have fixed this by skipping empty strings.
Signed-off-by: Fabrice Coulon <fabrice@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
During spec generation, ideally directories should not be auto
packaged under the %file section of rpm packages but take ownership of
specific directories.
* packages only empty directories or explict directory.
See:
- http://www.rpm.org/max-rpm/s1-rpm-inside-files-list-directives.html
- "The %dir Directive"
* This will prevent the overlapping of security permission.
For example, in Tizen the directory /etc have smack label 'System::Shared'
So Only one package should own and set the label of /etc to prevent
the overwriting of the smack label.
Existing behaviour is maintained if DIRFILES is not set. If it is set,
the modified behaviour is used. If can be set to an empty value by
core recipes to trigger the modified behaviour.
[RP: Modified to allow optional usage of DIRFILES]
Signed-off-by: Ronan Le Martret <ronan@fridu.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Richard Purdie
Khem Raj
Bruce Ashfield
Ross Burton
He Zhe
Joe Slater
Tobias Olausson
Peter Urbanec
Wenzong Fan
Andreas Oberritter
Robert Yang
Otavio Salvador
Mark Hatle
Nitin A Kamble
Alejandro Hernandez
leimaohui
Darren Hart
Carlos Rafael Giani
Philip Balister
Hongxu Jia
Paul Eggleton
Martin Jansa
Fabrice Coulon
Ronan Le Martret